Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...

1 files changed, 35 insertions, 77 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 49e3adffbf5b..c4c0a8ea11e4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -36,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/mux.h>
 
@@ -45,6 +44,7 @@
 #include <mach/usb.h>
 
 #include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
 #include "iomap.h"
 #include "common.h"
 
@@ -167,7 +167,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-#define LATCH1_GPIO_BASE	232
 #define LATCH1_NGPIO		8
 
 static struct resource latch1_resources[] = {
@@ -183,7 +182,6 @@ static struct resource latch1_resources[] = {
 
 static struct bgpio_pdata latch1_pdata = {
 	.label	= LATCH1_LABEL,
-	.base	= LATCH1_GPIO_BASE,
 	.ngpio	= LATCH1_NGPIO,
 };
 
@@ -206,11 +204,13 @@ static struct platform_device latch1_gpio_device = {
 #define LATCH1_PIN_DOCKIT1		6
 #define LATCH1_PIN_DOCKIT2		7
 
+#define LATCH2_NGPIO			16
+
 static struct resource latch2_resources[] = {
 	[0] = {
 		.name	= "dat",
 		.start	= LATCH2_PHYS,
-		.end	= LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+		.end	= LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -219,8 +219,7 @@ static struct resource latch2_resources[] = {
 
 static struct bgpio_pdata latch2_pdata = {
 	.label	= LATCH2_LABEL,
-	.base	= AMS_DELTA_LATCH2_GPIO_BASE,
-	.ngpio	= AMS_DELTA_LATCH2_NGPIO,
+	.ngpio	= LATCH2_NGPIO,
 };
 
 static struct platform_device latch2_gpio_device = {
@@ -247,8 +246,8 @@ static struct platform_device latch2_gpio_device = {
 #define LATCH2_PIN_SCARD_CMDVCC		11
 #define LATCH2_PIN_MODEM_NRESET		12
 #define LATCH2_PIN_MODEM_CODEC		13
-#define LATCH2_PIN_HOOKFLASH1		14
-#define LATCH2_PIN_HOOKFLASH2		15
+#define LATCH2_PIN_AUDIO_MUTE		14
+#define LATCH2_PIN_HOOKFLASH		15
 
 static struct regulator_consumer_supply modem_nreset_consumers[] = {
 	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -369,15 +368,9 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
 	},
 };
 
-/*
- * Dynamically allocated GPIO numbers must be obtained fromm GPIO device
- * before they can be put in the gpio_led table.  Before that happens,
- * initialize the table with invalid GPIO numbers, not 0.
- */
 static struct gpio_led gpio_leds[] __initdata = {
 	[LATCH1_PIN_LED_CAMERA] = {
 		.name		 = "camera",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 #ifdef CONFIG_LEDS_TRIGGERS
 		.default_trigger = "ams_delta_camera",
@@ -385,27 +378,22 @@ static struct gpio_led gpio_leds[] __initdata = {
 	},
 	[LATCH1_PIN_LED_ADVERT] = {
 		.name		 = "advert",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_MAIL] = {
 		.name		 = "email",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_HANDSFREE] = {
 		.name		 = "handsfree",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_VOICEMAIL] = {
 		.name		 = "voicemail",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_VOICE] = {
 		.name		 = "voice",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 };
@@ -415,6 +403,24 @@ static const struct gpio_led_platform_data leds_pdata __initconst = {
 	.num_leds	= ARRAY_SIZE(gpio_leds),
 };
 
+static struct gpiod_lookup_table leds_gpio_table = {
+	.table = {
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL,
+				LATCH1_PIN_LED_CAMERA, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL,
+				LATCH1_PIN_LED_ADVERT, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL,
+				LATCH1_PIN_LED_MAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL,
+				LATCH1_PIN_LED_HANDSFREE, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL,
+				LATCH1_PIN_LED_VOICEMAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL,
+				LATCH1_PIN_LED_VOICE, 0),
+		{ },
+	},
+};
+
 static struct i2c_board_info ams_delta_camera_board_info[] = {
 	{
 		I2C_BOARD_INFO("ov6650", 0x60),
@@ -586,6 +592,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
 static struct gpiod_hog ams_delta_gpio_hogs[] = {
 	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
 		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
 	{},
 };
 
@@ -675,6 +683,8 @@ static void __init ams_delta_latch2_init(void)
 
 static void __init ams_delta_init(void)
 {
+	struct platform_device *leds_pdev;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -738,6 +748,12 @@ static void __init ams_delta_init(void)
 	gpiod_add_lookup_tables(ams_delta_gpio_tables,
 				ARRAY_SIZE(ams_delta_gpio_tables));
 
+	leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+	if (!IS_ERR(leds_pdev)) {
+		leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
+		gpiod_add_lookup_table(&leds_gpio_table);
+	}
+
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 
 	omapfb_set_lcd_config(&ams_delta_lcd_config);
@@ -794,64 +810,6 @@ static struct platform_device ams_delta_modem_device = {
 	},
 };
 
-/*
- * leds-gpio driver doesn't make use of GPIO lookup tables,
- * it has to be provided with GPIO numbers over platform data
- * if GPIO descriptor info can't be obtained from device tree.
- * We could either define GPIO lookup tables and use them on behalf
- * of the leds-gpio device, or we can use GPIO driver level methods
- * for identification of GPIO numbers as long as we don't support
- * device tree.  Let's do the latter.
- */
-static void __init ams_delta_led_init(struct gpio_chip *chip)
-{
-	struct gpio_desc *gpiod;
-	int i;
-
-	for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) {
-		gpiod = gpiochip_request_own_desc(chip, i, "camera-led", 0);
-		if (IS_ERR(gpiod)) {
-			pr_warn("%s: %s GPIO %d request failed (%ld)\n",
-				__func__, LATCH1_LABEL, i, PTR_ERR(gpiod));
-			continue;
-		}
-
-		/* Assign GPIO numbers to LED device. */
-		gpio_leds[i].gpio = desc_to_gpio(gpiod);
-
-		gpiochip_free_own_desc(gpiod);
-	}
-
-	gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
-}
-
-/*
- * The purpose of this function is to take care of assignment of GPIO numbers
- * to platform devices which depend on GPIO lines provided by Amstrad Delta
- * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables.
- * The function may be called as soon as latch1/latch2 GPIO devices are
- * initilized.  Since basic-mmio-gpio driver is not registered before
- * device_initcall, this may happen at erliest during device_initcall_sync.
- * Dependent devices shouldn't be registered before that, their
- * registration may be performed from within this function or later.
- */
-static int __init ams_delta_gpio_init(void)
-{
-	struct gpio_chip *chip;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
-
-	chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label);
-	if (!chip)
-		pr_err("%s: latch1 GPIO chip not found\n", __func__);
-	else
-		ams_delta_led_init(chip);
-
-	return 0;
-}
-device_initcall_sync(ams_delta_gpio_init);
-
 static int __init modem_nreset_init(void)
 {
 	int err;