arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 111 deletions

diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
deleted file mode 100644
index c7926812971c..000000000000
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_FUTEX is not set
-# CONFIG_AIO is not set
-CONFIG_SLAB=y
-CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BF537=y
-CONFIG_IRQ_TIMER0=12
-CONFIG_PNAV10=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
-CONFIG_IP_CHECKSUM_L1=y
-CONFIG_SYSCALL_TAB_L1=y
-CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=y
-CONFIG_C_CDPRIO=y
-CONFIG_BANK_1=0x33B0
-CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B2
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_BFIN_MAC=y
-# CONFIG_BFIN_MAC_USE_L1 is not set
-CONFIG_BFIN_TX_DESC_NUM=100
-CONFIG_BFIN_RX_DESC_NUM=100
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AD7877=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_BFIN=y
-CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_UART0=y
-CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-CONFIG_SPI=y
-CONFIG_SPI_BFIN5XX=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SOUND_PRIME=y
-# CONFIG_HID is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_BFIN=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_ACCESS_CHECK is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m