arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

45 files changed, 0 insertions, 14591 deletions

diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore
deleted file mode 100644
index c5f676c3c224..000000000000
--- a/arch/blackfin/kernel/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-vmlinux.lds
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
deleted file mode 100644
index 1580791f0e3a..000000000000
--- a/arch/blackfin/kernel/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# arch/blackfin/kernel/Makefile
-#
-
-extra-y := vmlinux.lds
-
-obj-y := \
-	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
-	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_dma.o \
-	exception.o dumpstack.o
-
-ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
-    obj-y += time-ts.o
-else
-    obj-y += time.o
-endif
-
-obj-$(CONFIG_GPIO_ADI)               += bfin_gpio.o
-obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
-obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
-CFLAGS_REMOVE_ftrace.o = -pg
-
-obj-$(CONFIG_IPIPE)                  += ipipe.o
-obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
-obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
-obj-$(CONFIG_MODULES)                += module.o
-obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
-obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
-obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
-obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
-obj-$(CONFIG_STACKTRACE)             += stacktrace.o
-obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
-obj-$(CONFIG_BFIN_PSEUDODBG_INSNS)   += pseudodbg.o
-obj-$(CONFIG_PERF_EVENTS)            += perf_event.o
-
-# the kgdb test puts code into L2 and without linker
-# relaxation, we need to force long calls to/from it
-CFLAGS_kgdb_test.o := -mlong-calls
-
-obj-$(CONFIG_DEBUG_MMRS)             += debug-mmrs.o
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
deleted file mode 100644
index 486560aea050..000000000000
--- a/arch/blackfin/kernel/asm-offsets.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * generate definitions needed by assembly language modules
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/irq.h>
-#include <linux/thread_info.h>
-#include <linux/kbuild.h>
-#include <asm/pda.h>
-
-int main(void)
-{
-	/* offsets into the task struct */
-	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
-	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
-	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
-	DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-	DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending));
-
-	/* offsets into the irq_cpustat_t struct */
-	DEFINE(CPUSTAT_SOFTIRQ_PENDING,
-	       offsetof(irq_cpustat_t, __softirq_pending));
-
-	/* offsets into the thread struct */
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
-	DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
-	DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
-	DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
-	DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
-	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
-
-	/* offsets in thread_info struct */
-	OFFSET(TI_TASK, thread_info, task);
-	OFFSET(TI_FLAGS, thread_info, flags);
-	OFFSET(TI_CPU, thread_info, cpu);
-	OFFSET(TI_PREEMPT, thread_info, preempt_count);
-
-	/* offsets into the pt_regs */
-	DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
-	DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
-	DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
-	DEFINE(PT_R0, offsetof(struct pt_regs, r0));
-	DEFINE(PT_R1, offsetof(struct pt_regs, r1));
-	DEFINE(PT_R2, offsetof(struct pt_regs, r2));
-	DEFINE(PT_R3, offsetof(struct pt_regs, r3));
-	DEFINE(PT_R4, offsetof(struct pt_regs, r4));
-	DEFINE(PT_R5, offsetof(struct pt_regs, r5));
-	DEFINE(PT_R6, offsetof(struct pt_regs, r6));
-	DEFINE(PT_R7, offsetof(struct pt_regs, r7));
-
-	DEFINE(PT_P0, offsetof(struct pt_regs, p0));
-	DEFINE(PT_P1, offsetof(struct pt_regs, p1));
-	DEFINE(PT_P2, offsetof(struct pt_regs, p2));
-	DEFINE(PT_P3, offsetof(struct pt_regs, p3));
-	DEFINE(PT_P4, offsetof(struct pt_regs, p4));
-	DEFINE(PT_P5, offsetof(struct pt_regs, p5));
-
-	DEFINE(PT_FP, offsetof(struct pt_regs, fp));
-	DEFINE(PT_USP, offsetof(struct pt_regs, usp));
-	DEFINE(PT_I0, offsetof(struct pt_regs, i0));
-	DEFINE(PT_I1, offsetof(struct pt_regs, i1));
-	DEFINE(PT_I2, offsetof(struct pt_regs, i2));
-	DEFINE(PT_I3, offsetof(struct pt_regs, i3));
-	DEFINE(PT_M0, offsetof(struct pt_regs, m0));
-	DEFINE(PT_M1, offsetof(struct pt_regs, m1));
-	DEFINE(PT_M2, offsetof(struct pt_regs, m2));
-	DEFINE(PT_M3, offsetof(struct pt_regs, m3));
-	DEFINE(PT_L0, offsetof(struct pt_regs, l0));
-	DEFINE(PT_L1, offsetof(struct pt_regs, l1));
-	DEFINE(PT_L2, offsetof(struct pt_regs, l2));
-	DEFINE(PT_L3, offsetof(struct pt_regs, l3));
-	DEFINE(PT_B0, offsetof(struct pt_regs, b0));
-	DEFINE(PT_B1, offsetof(struct pt_regs, b1));
-	DEFINE(PT_B2, offsetof(struct pt_regs, b2));
-	DEFINE(PT_B3, offsetof(struct pt_regs, b3));
-	DEFINE(PT_A0X, offsetof(struct pt_regs, a0x));
-	DEFINE(PT_A0W, offsetof(struct pt_regs, a0w));
-	DEFINE(PT_A1X, offsetof(struct pt_regs, a1x));
-	DEFINE(PT_A1W, offsetof(struct pt_regs, a1w));
-	DEFINE(PT_LC0, offsetof(struct pt_regs, lc0));
-	DEFINE(PT_LC1, offsetof(struct pt_regs, lc1));
-	DEFINE(PT_LT0, offsetof(struct pt_regs, lt0));
-	DEFINE(PT_LT1, offsetof(struct pt_regs, lt1));
-	DEFINE(PT_LB0, offsetof(struct pt_regs, lb0));
-	DEFINE(PT_LB1, offsetof(struct pt_regs, lb1));
-	DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat));
-	DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved));
-	DEFINE(PT_RETS, offsetof(struct pt_regs, rets));
-	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-	DEFINE(PT_RETX, offsetof(struct pt_regs, retx));
-	DEFINE(PT_RETN, offsetof(struct pt_regs, retn));
-	DEFINE(PT_RETE, offsetof(struct pt_regs, rete));
-	DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat));
-	DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg));
-	DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend));
-	DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs));
-	DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs));        /* Needed by gdb */
-	DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */
-	DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs));    /* Needed by gdb */
-	DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs));  /* Needed by gdb */
-	DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */
-
-	/* signal defines */
-	DEFINE(SIGSEGV, SIGSEGV);
-	DEFINE(SIGTRAP, SIGTRAP);
-
-	/* PDA management (in L1 scratchpad) */
-	DEFINE(PDA_SYSCFG, offsetof(struct blackfin_pda, syscfg));
-#ifdef CONFIG_SMP
-	DEFINE(PDA_IRQFLAGS, offsetof(struct blackfin_pda, imask));
-#endif
-	DEFINE(PDA_IPDT, offsetof(struct blackfin_pda, ipdt));
-	DEFINE(PDA_IPDT_SWAPCOUNT, offsetof(struct blackfin_pda, ipdt_swapcount));
-	DEFINE(PDA_DPDT, offsetof(struct blackfin_pda, dpdt));
-	DEFINE(PDA_DPDT_SWAPCOUNT, offsetof(struct blackfin_pda, dpdt_swapcount));
-	DEFINE(PDA_EXIPTR, offsetof(struct blackfin_pda, ex_iptr));
-	DEFINE(PDA_EXOPTR, offsetof(struct blackfin_pda, ex_optr));
-	DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
-	DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
-	DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
-	DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
-#ifdef ANOMALY_05000261
-	DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
-#endif
-	DEFINE(PDA_DCPLB, offsetof(struct blackfin_pda, dcplb_fault_addr));
-	DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
-	DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
-	DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
-#ifdef CONFIG_DEBUG_DOUBLEFAULT
-	DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
-	DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
-	DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
-	DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
-#endif
-
-	/* PDA initial management */
-	DEFINE(PDA_INIT_RETX, offsetof(struct blackfin_initial_pda, retx));
-#ifdef CONFIG_DEBUG_DOUBLEFAULT
-	DEFINE(PDA_INIT_DF_DCPLB, offsetof(struct blackfin_initial_pda, dcplb_doublefault_addr));
-	DEFINE(PDA_INIT_DF_ICPLB, offsetof(struct blackfin_initial_pda, icplb_doublefault_addr));
-	DEFINE(PDA_INIT_DF_SEQSTAT, offsetof(struct blackfin_initial_pda, seqstat_doublefault));
-	DEFINE(PDA_INIT_DF_RETX, offsetof(struct blackfin_initial_pda, retx_doublefault));
-#endif
-
-#ifdef CONFIG_SMP
-	/* Inter-core lock (in L2 SRAM) */
-	DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
-#endif
-
-	return 0;
-}
diff --git a/arch/blackfin/kernel/bfin_dma.c b/arch/blackfin/kernel/bfin_dma.c
deleted file mode 100644
index 9d3eb0cf8ccc..000000000000
--- a/arch/blackfin/kernel/bfin_dma.c
+++ /dev/null
@@ -1,612 +0,0 @@
-/*
- * bfin_dma.c - Blackfin DMA implementation
- *
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/proc_fs.h>
-#include <linux/sched.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-
-#include <asm/blackfin.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-#include <asm/early_printk.h>
-
-/*
- * To make sure we work around 05000119 - we always check DMA_DONE bit,
- * never the DMA_RUN bit
- */
-
-struct dma_channel dma_ch[MAX_DMA_CHANNELS];
-EXPORT_SYMBOL(dma_ch);
-
-static int __init blackfin_dma_init(void)
-{
-	int i;
-
-	printk(KERN_INFO "Blackfin DMA Controller\n");
-
-
-#if ANOMALY_05000480
-	bfin_write_DMAC_TC_PER(0x0111);
-#endif
-
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		atomic_set(&dma_ch[i].chan_status, 0);
-		dma_ch[i].regs = dma_io_base_addr[i];
-	}
-#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x)
-	/* Mark MEMDMA Channel 3 as requested since we're using it internally */
-	request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy");
-	request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy");
-#else
-	/* Mark MEMDMA Channel 0 as requested since we're using it internally */
-	request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy");
-	request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy");
-#endif
-
-#if defined(CONFIG_DEB_DMA_URGENT)
-	bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE()
-			 | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT);
-#endif
-
-	return 0;
-}
-arch_initcall(blackfin_dma_init);
-
-#ifdef CONFIG_PROC_FS
-static int proc_dma_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	for (i = 0; i < MAX_DMA_CHANNELS; ++i)
-		if (dma_channel_active(i))
-			seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id);
-
-	return 0;
-}
-
-static int proc_dma_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, proc_dma_show, NULL);
-}
-
-static const struct file_operations proc_dma_operations = {
-	.open		= proc_dma_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init proc_dma_init(void)
-{
-	proc_create("dma", 0, NULL, &proc_dma_operations);
-	return 0;
-}
-late_initcall(proc_dma_init);
-#endif
-
-static void set_dma_peripheral_map(unsigned int channel, const char *device_id)
-{
-#ifdef CONFIG_BF54x
-	unsigned int per_map;
-
-	switch (channel) {
-		case CH_UART2_RX: per_map = 0xC << 12; break;
-		case CH_UART2_TX: per_map = 0xD << 12; break;
-		case CH_UART3_RX: per_map = 0xE << 12; break;
-		case CH_UART3_TX: per_map = 0xF << 12; break;
-		default:          return;
-	}
-
-	if (strncmp(device_id, "BFIN_UART", 9) == 0)
-		dma_ch[channel].regs->peripheral_map = per_map;
-#endif
-}
-
-/**
- *	request_dma - request a DMA channel
- *
- * Request the specific DMA channel from the system if it's available.
- */
-int request_dma(unsigned int channel, const char *device_id)
-{
-	pr_debug("request_dma() : BEGIN\n");
-
-	if (device_id == NULL)
-		printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel);
-
-#if defined(CONFIG_BF561) && ANOMALY_05000182
-	if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
-		if (get_cclk() > 500000000) {
-			printk(KERN_WARNING
-			       "Request IMDMA failed due to ANOMALY 05000182\n");
-			return -EFAULT;
-		}
-	}
-#endif
-
-	if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
-		pr_debug("DMA CHANNEL IN USE\n");
-		return -EBUSY;
-	}
-
-	set_dma_peripheral_map(channel, device_id);
-	dma_ch[channel].device_id = device_id;
-	dma_ch[channel].irq = 0;
-
-	/* This is to be enabled by putting a restriction -
-	 * you have to request DMA, before doing any operations on
-	 * descriptor/channel
-	 */
-	pr_debug("request_dma() : END\n");
-	return 0;
-}
-EXPORT_SYMBOL(request_dma);
-
-int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
-{
-	int ret;
-	unsigned int irq;
-
-	BUG_ON(channel >= MAX_DMA_CHANNELS || !callback ||
-			!atomic_read(&dma_ch[channel].chan_status));
-
-	irq = channel2irq(channel);
-	ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data);
-	if (ret)
-		return ret;
-
-	dma_ch[channel].irq = irq;
-	dma_ch[channel].data = data;
-
-	return 0;
-}
-EXPORT_SYMBOL(set_dma_callback);
-
-/**
- *	clear_dma_buffer - clear DMA fifos for specified channel
- *
- * Set the Buffer Clear bit in the Configuration register of specific DMA
- * channel. This will stop the descriptor based DMA operation.
- */
-static void clear_dma_buffer(unsigned int channel)
-{
-	dma_ch[channel].regs->cfg |= RESTART;
-	SSYNC();
-	dma_ch[channel].regs->cfg &= ~RESTART;
-}
-
-void free_dma(unsigned int channel)
-{
-	pr_debug("freedma() : BEGIN\n");
-	BUG_ON(channel >= MAX_DMA_CHANNELS ||
-			!atomic_read(&dma_ch[channel].chan_status));
-
-	/* Halt the DMA */
-	disable_dma(channel);
-	clear_dma_buffer(channel);
-
-	if (dma_ch[channel].irq)
-		free_irq(dma_ch[channel].irq, dma_ch[channel].data);
-
-	/* Clear the DMA Variable in the Channel */
-	atomic_set(&dma_ch[channel].chan_status, 0);
-
-	pr_debug("freedma() : END\n");
-}
-EXPORT_SYMBOL(free_dma);
-
-#ifdef CONFIG_PM
-# ifndef MAX_DMA_SUSPEND_CHANNELS
-#  define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS
-# endif
-# ifndef CONFIG_BF60x
-int blackfin_dma_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
-		if (dma_ch[i].regs->cfg & DMAEN) {
-			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
-			return -EBUSY;
-		}
-		if (i < MAX_DMA_SUSPEND_CHANNELS)
-			dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
-	}
-
-#if ANOMALY_05000480
-	bfin_write_DMAC_TC_PER(0x0);
-#endif
-	return 0;
-}
-
-void blackfin_dma_resume(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
-		dma_ch[i].regs->cfg = 0;
-		if (i < MAX_DMA_SUSPEND_CHANNELS)
-			dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
-	}
-#if ANOMALY_05000480
-	bfin_write_DMAC_TC_PER(0x0111);
-#endif
-}
-# else
-int blackfin_dma_suspend(void)
-{
-	return 0;
-}
-
-void blackfin_dma_resume(void)
-{
-}
-#endif
-#endif
-
-/**
- *	blackfin_dma_early_init - minimal DMA init
- *
- * Setup a few DMA registers so we can safely do DMA transfers early on in
- * the kernel booting process.  Really this just means using dma_memcpy().
- */
-void __init blackfin_dma_early_init(void)
-{
-	early_shadow_stamp();
-	bfin_write_MDMA_S0_CONFIG(0);
-	bfin_write_MDMA_S1_CONFIG(0);
-}
-
-void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
-{
-	unsigned long dst = (unsigned long)pdst;
-	unsigned long src = (unsigned long)psrc;
-	struct dma_register *dst_ch, *src_ch;
-
-	early_shadow_stamp();
-
-	/* We assume that everything is 4 byte aligned, so include
-	 * a basic sanity check
-	 */
-	BUG_ON(dst % 4);
-	BUG_ON(src % 4);
-	BUG_ON(size % 4);
-
-	src_ch = 0;
-	/* Find an avalible memDMA channel */
-	while (1) {
-		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
-		} else {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		}
-
-		if (!DMA_MMR_READ(&src_ch->cfg))
-			break;
-		else if (DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE) {
-			DMA_MMR_WRITE(&src_ch->cfg, 0);
-			break;
-		}
-	}
-
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.
-	 */
-	__builtin_bfin_ssync();
-
-	/* Destination */
-	bfin_write32(&dst_ch->start_addr, dst);
-	DMA_MMR_WRITE(&dst_ch->x_count, size >> 2);
-	DMA_MMR_WRITE(&dst_ch->x_modify, 1 << 2);
-	DMA_MMR_WRITE(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
-
-	/* Source */
-	bfin_write32(&src_ch->start_addr, src);
-	DMA_MMR_WRITE(&src_ch->x_count, size >> 2);
-	DMA_MMR_WRITE(&src_ch->x_modify, 1 << 2);
-	DMA_MMR_WRITE(&src_ch->irq_status, DMA_DONE | DMA_ERR);
-
-	/* Enable */
-	DMA_MMR_WRITE(&src_ch->cfg, DMAEN | WDSIZE_32);
-	DMA_MMR_WRITE(&dst_ch->cfg, WNR | DI_EN_X | DMAEN | WDSIZE_32);
-
-	/* Since we are atomic now, don't use the workaround ssync */
-	__builtin_bfin_ssync();
-
-#ifdef CONFIG_BF60x
-	/* Work around a possible MDMA anomaly. Running 2 MDMA channels to
-	 * transfer DDR data to L1 SRAM may corrupt data.
-	 * Should be reverted after this issue is root caused.
-	 */
-	while (!(DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE))
-		continue;
-#endif
-}
-
-void __init early_dma_memcpy_done(void)
-{
-	early_shadow_stamp();
-
-	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
-	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
-		continue;
-
-	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
-	bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
-	/*
-	 * Now that DMA is done, we would normally flush cache, but
-	 * i/d cache isn't running this early, so we don't bother,
-	 * and just clear out the DMA channel for next time
-	 */
-	bfin_write_MDMA_S0_CONFIG(0);
-	bfin_write_MDMA_S1_CONFIG(0);
-	bfin_write_MDMA_D0_CONFIG(0);
-	bfin_write_MDMA_D1_CONFIG(0);
-
-	__builtin_bfin_ssync();
-}
-
-#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x)
-#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG
-#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG
-#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR
-#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S3_IRQ_STATUS
-#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S3_X_COUNT
-#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S3_X_MODIFY
-#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S3_Y_COUNT
-#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S3_Y_MODIFY
-#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D3_CONFIG
-#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D3_START_ADDR
-#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D3_IRQ_STATUS
-#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D3_IRQ_STATUS
-#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D3_X_COUNT
-#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D3_X_MODIFY
-#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D3_Y_COUNT
-#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D3_Y_MODIFY
-#else
-#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S0_CONFIG
-#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S0_CONFIG
-#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S0_START_ADDR
-#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S0_IRQ_STATUS
-#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S0_X_COUNT
-#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S0_X_MODIFY
-#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S0_Y_COUNT
-#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S0_Y_MODIFY
-#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D0_CONFIG
-#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D0_START_ADDR
-#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D0_IRQ_STATUS
-#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D0_IRQ_STATUS
-#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D0_X_COUNT
-#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D0_X_MODIFY
-#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D0_Y_COUNT
-#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D0_Y_MODIFY
-#endif
-
-/**
- *	__dma_memcpy - program the MDMA registers
- *
- * Actually program MDMA0 and wait for the transfer to finish.  Disable IRQs
- * while programming registers so that everything is fully configured.  Wait
- * for DMA to finish with IRQs enabled.  If interrupted, the initial DMA_DONE
- * check will make sure we don't clobber any existing transfer.
- */
-static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf)
-{
-	static DEFINE_SPINLOCK(mdma_lock);
-	unsigned long flags;
-
-	spin_lock_irqsave(&mdma_lock, flags);
-
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.  Do it under irq lock and
-	 * without the anomaly version (because we are atomic already).
-	 */
-	__builtin_bfin_ssync();
-
-	if (bfin_read_MDMA_S_CONFIG())
-		while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE))
-			continue;
-
-	if (conf & DMA2D) {
-		/* For larger bit sizes, we've already divided down cnt so it
-		 * is no longer a multiple of 64k.  So we have to break down
-		 * the limit here so it is a multiple of the incoming size.
-		 * There is no limitation here in terms of total size other
-		 * than the hardware though as the bits lost in the shift are
-		 * made up by MODIFY (== we can hit the whole address space).
-		 * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4
-		 */
-		u32 shift = abs(dmod) >> 1;
-		size_t ycnt = cnt >> (16 - shift);
-		cnt = 1 << (16 - shift);
-		bfin_write_MDMA_D_Y_COUNT(ycnt);
-		bfin_write_MDMA_S_Y_COUNT(ycnt);
-		bfin_write_MDMA_D_Y_MODIFY(dmod);
-		bfin_write_MDMA_S_Y_MODIFY(smod);
-	}
-
-	bfin_write_MDMA_D_START_ADDR(daddr);
-	bfin_write_MDMA_D_X_COUNT(cnt);
-	bfin_write_MDMA_D_X_MODIFY(dmod);
-	bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR);
-
-	bfin_write_MDMA_S_START_ADDR(saddr);
-	bfin_write_MDMA_S_X_COUNT(cnt);
-	bfin_write_MDMA_S_X_MODIFY(smod);
-	bfin_write_MDMA_S_IRQ_STATUS(DMA_DONE | DMA_ERR);
-
-	bfin_write_MDMA_S_CONFIG(DMAEN | conf);
-	if (conf & DMA2D)
-		bfin_write_MDMA_D_CONFIG(WNR | DI_EN_Y | DMAEN | conf);
-	else
-		bfin_write_MDMA_D_CONFIG(WNR | DI_EN_X | DMAEN | conf);
-
-	spin_unlock_irqrestore(&mdma_lock, flags);
-
-	SSYNC();
-
-	while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE))
-		if (bfin_read_MDMA_S_CONFIG())
-			continue;
-		else
-			return;
-
-	bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR);
-
-	bfin_write_MDMA_S_CONFIG(0);
-	bfin_write_MDMA_D_CONFIG(0);
-}
-
-/**
- *	_dma_memcpy - translate C memcpy settings into MDMA settings
- *
- * Handle all the high level steps before we touch the MDMA registers.  So
- * handle direction, tweaking of sizes, and formatting of addresses.
- */
-static void *_dma_memcpy(void *pdst, const void *psrc, size_t size)
-{
-	u32 conf, shift;
-	s16 mod;
-	unsigned long dst = (unsigned long)pdst;
-	unsigned long src = (unsigned long)psrc;
-
-	if (size == 0)
-		return NULL;
-
-	if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) {
-		conf = WDSIZE_32;
-		shift = 2;
-	} else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) {
-		conf = WDSIZE_16;
-		shift = 1;
-	} else {
-		conf = WDSIZE_8;
-		shift = 0;
-	}
-
-	/* If the two memory regions have a chance of overlapping, make
-	 * sure the memcpy still works as expected.  Do this by having the
-	 * copy run backwards instead.
-	 */
-	mod = 1 << shift;
-	if (src < dst) {
-		mod *= -1;
-		dst += size + mod;
-		src += size + mod;
-	}
-	size >>= shift;
-
-#ifndef DMA_MMR_SIZE_32
-	if (size > 0x10000)
-		conf |= DMA2D;
-#endif
-
-	__dma_memcpy(dst, mod, src, mod, size, conf);
-
-	return pdst;
-}
-
-/**
- *	dma_memcpy - DMA memcpy under mutex lock
- *
- * Do not check arguments before starting the DMA memcpy.  Break the transfer
- * up into two pieces.  The first transfer is in multiples of 64k and the
- * second transfer is the piece smaller than 64k.
- */
-void *dma_memcpy(void *pdst, const void *psrc, size_t size)
-{
-	unsigned long dst = (unsigned long)pdst;
-	unsigned long src = (unsigned long)psrc;
-
-	if (bfin_addr_dcacheable(src))
-		blackfin_dcache_flush_range(src, src + size);
-
-	if (bfin_addr_dcacheable(dst))
-		blackfin_dcache_invalidate_range(dst, dst + size);
-
-	return dma_memcpy_nocache(pdst, psrc, size);
-}
-EXPORT_SYMBOL(dma_memcpy);
-
-/**
- *	dma_memcpy_nocache - DMA memcpy under mutex lock
- *	- No cache flush/invalidate
- *
- * Do not check arguments before starting the DMA memcpy.  Break the transfer
- * up into two pieces.  The first transfer is in multiples of 64k and the
- * second transfer is the piece smaller than 64k.
- */
-void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size)
-{
-#ifdef DMA_MMR_SIZE_32
-	_dma_memcpy(pdst, psrc, size);
-#else
-	size_t bulk, rest;
-
-	bulk = size & ~0xffff;
-	rest = size - bulk;
-	if (bulk)
-		_dma_memcpy(pdst, psrc, bulk);
-	_dma_memcpy(pdst + bulk, psrc + bulk, rest);
-#endif
-	return pdst;
-}
-EXPORT_SYMBOL(dma_memcpy_nocache);
-
-/**
- *	safe_dma_memcpy - DMA memcpy w/argument checking
- *
- * Verify arguments are safe before heading to dma_memcpy().
- */
-void *safe_dma_memcpy(void *dst, const void *src, size_t size)
-{
-	if (!access_ok(VERIFY_WRITE, dst, size))
-		return NULL;
-	if (!access_ok(VERIFY_READ, src, size))
-		return NULL;
-	return dma_memcpy(dst, src, size);
-}
-EXPORT_SYMBOL(safe_dma_memcpy);
-
-static void _dma_out(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len,
-                     u16 size, u16 dma_size)
-{
-	blackfin_dcache_flush_range(buf, buf + len * size);
-	__dma_memcpy(addr, 0, buf, size, len, dma_size);
-}
-
-static void _dma_in(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len,
-                    u16 size, u16 dma_size)
-{
-	blackfin_dcache_invalidate_range(buf, buf + len * size);
-	__dma_memcpy(buf, size, addr, 0, len, dma_size);
-}
-
-#define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \
-void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned DMA_MMR_SIZE_TYPE len) \
-{ \
-	_dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \
-} \
-EXPORT_SYMBOL(dma_##io##s##bwl)
-MAKE_DMA_IO(out, b, 1,  8, const);
-MAKE_DMA_IO(in,  b, 1,  8, );
-MAKE_DMA_IO(out, w, 2, 16, const);
-MAKE_DMA_IO(in,  w, 2, 16, );
-MAKE_DMA_IO(out, l, 4, 32, const);
-MAKE_DMA_IO(in,  l, 4, 32, );
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
deleted file mode 100644
index 63da80bbadf6..000000000000
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ /dev/null
@@ -1,1208 +0,0 @@
-/*
- * GPIO Abstraction Layer
- *
- * Copyright 2006-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/gpio/driver.h>
-/* FIXME: consumer API required for gpio_set_value() etc, get rid of this */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <asm/gpio.h>
-#include <asm/irq_handler.h>
-#include <asm/portmux.h>
-
-#if ANOMALY_05000311 || ANOMALY_05000323
-enum {
-	AWA_data = SYSCR,
-	AWA_data_clear = SYSCR,
-	AWA_data_set = SYSCR,
-	AWA_toggle = SYSCR,
-	AWA_maska = BFIN_UART_SCR,
-	AWA_maska_clear = BFIN_UART_SCR,
-	AWA_maska_set = BFIN_UART_SCR,
-	AWA_maska_toggle = BFIN_UART_SCR,
-	AWA_maskb = BFIN_UART_GCTL,
-	AWA_maskb_clear = BFIN_UART_GCTL,
-	AWA_maskb_set = BFIN_UART_GCTL,
-	AWA_maskb_toggle = BFIN_UART_GCTL,
-	AWA_dir = SPORT1_STAT,
-	AWA_polar = SPORT1_STAT,
-	AWA_edge = SPORT1_STAT,
-	AWA_both = SPORT1_STAT,
-#if ANOMALY_05000311
-	AWA_inen = TIMER_ENABLE,
-#elif ANOMALY_05000323
-	AWA_inen = DMA1_1_CONFIG,
-#endif
-};
-	/* Anomaly Workaround */
-#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
-#else
-#define AWA_DUMMY_READ(...)  do { } while (0)
-#endif
-
-static struct gpio_port_t * const gpio_array[] = {
-#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
-	(struct gpio_port_t *) FIO_FLAG_D,
-#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-	(struct gpio_port_t *) PORTFIO,
-	(struct gpio_port_t *) PORTGIO,
-	(struct gpio_port_t *) PORTHIO,
-#elif defined(BF561_FAMILY)
-	(struct gpio_port_t *) FIO0_FLAG_D,
-	(struct gpio_port_t *) FIO1_FLAG_D,
-	(struct gpio_port_t *) FIO2_FLAG_D,
-#else
-# error no gpio arrays defined
-#endif
-};
-
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-static unsigned short * const port_fer[] = {
-	(unsigned short *) PORTF_FER,
-	(unsigned short *) PORTG_FER,
-	(unsigned short *) PORTH_FER,
-};
-
-# if !defined(BF537_FAMILY)
-static unsigned short * const port_mux[] = {
-	(unsigned short *) PORTF_MUX,
-	(unsigned short *) PORTG_MUX,
-	(unsigned short *) PORTH_MUX,
-};
-
-static const
-u8 pmux_offset[][16] = {
-#  if defined(CONFIG_BF52x)
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
-	{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
-#  elif defined(CONFIG_BF51x)
-	{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
-	{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
-	{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
-#  endif
-};
-# endif
-
-#elif defined(BF538_FAMILY)
-static unsigned short * const port_fer[] = {
-	(unsigned short *) PORTCIO_FER,
-	(unsigned short *) PORTDIO_FER,
-	(unsigned short *) PORTEIO_FER,
-};
-#endif
-
-#define RESOURCE_LABEL_SIZE	16
-
-static struct str_ident {
-	char name[RESOURCE_LABEL_SIZE];
-} str_ident[MAX_RESOURCES];
-
-#if defined(CONFIG_PM)
-static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-# ifdef BF538_FAMILY
-static unsigned short port_fer_saved[3];
-# endif
-#endif
-
-static void gpio_error(unsigned gpio)
-{
-	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
-}
-
-static void set_label(unsigned short ident, const char *label)
-{
-	if (label) {
-		strncpy(str_ident[ident].name, label,
-			 RESOURCE_LABEL_SIZE);
-		str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
-	}
-}
-
-static char *get_label(unsigned short ident)
-{
-	return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
-}
-
-static int cmp_label(unsigned short ident, const char *label)
-{
-	if (label == NULL) {
-		dump_stack();
-		printk(KERN_ERR "Please provide none-null label\n");
-	}
-
-	if (label)
-		return strcmp(str_ident[ident].name, label);
-	else
-		return -EINVAL;
-}
-
-#define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
-#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
-#define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
-#define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
-#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
-
-DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
-DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE));
-DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
-
-inline int check_gpio(unsigned gpio)
-{
-	if (gpio >= MAX_BLACKFIN_GPIOS)
-		return -EINVAL;
-	return 0;
-}
-
-static void port_setup(unsigned gpio, unsigned short usage)
-{
-#if defined(BF538_FAMILY)
-	/*
-	 * BF538/9 Port C,D and E are special.
-	 * Inverted PORT_FER polarity on CDE and no PORF_FER on F
-	 * Regular PORT F GPIOs are handled here, CDE are exclusively
-	 * managed by GPIOLIB
-	 */
-
-	if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
-		return;
-
-	gpio -= MAX_BLACKFIN_GPIOS;
-
-	if (usage == GPIO_USAGE)
-		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
-	else
-		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-	SSYNC();
-	return;
-#endif
-
-	if (check_gpio(gpio))
-		return;
-
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-	if (usage == GPIO_USAGE)
-		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-	else
-		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
-	SSYNC();
-#endif
-}
-
-#ifdef BF537_FAMILY
-static const s8 port_mux[] = {
-	[GPIO_PF0] = 3,
-	[GPIO_PF1] = 3,
-	[GPIO_PF2] = 4,
-	[GPIO_PF3] = 4,
-	[GPIO_PF4] = 5,
-	[GPIO_PF5] = 6,
-	[GPIO_PF6] = 7,
-	[GPIO_PF7] = 8,
-	[GPIO_PF8 ... GPIO_PF15] = -1,
-	[GPIO_PG0 ... GPIO_PG7] = -1,
-	[GPIO_PG8] = 9,
-	[GPIO_PG9] = 9,
-	[GPIO_PG10] = 10,
-	[GPIO_PG11] = 10,
-	[GPIO_PG12] = 10,
-	[GPIO_PG13] = 11,
-	[GPIO_PG14] = 11,
-	[GPIO_PG15] = 11,
-	[GPIO_PH0 ... GPIO_PH15] = -1,
-	[PORT_PJ0 ... PORT_PJ3] = -1,
-	[PORT_PJ4] = 1,
-	[PORT_PJ5] = 1,
-	[PORT_PJ6 ... PORT_PJ9] = -1,
-	[PORT_PJ10] = 0,
-	[PORT_PJ11] = 0,
-};
-
-static int portmux_group_check(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-	s8 offset = port_mux[ident];
-	u16 m, pmux, pfunc, mask;
-
-	if (offset < 0)
-		return 0;
-
-	pmux = bfin_read_PORT_MUX();
-	for (m = 0; m < ARRAY_SIZE(port_mux); ++m) {
-		if (m == ident)
-			continue;
-		if (port_mux[m] != offset)
-			continue;
-		if (!is_reserved(peri, m, 1))
-			continue;
-
-		if (offset == 1)
-			mask = 3;
-		else
-			mask = 1;
-
-		pfunc = (pmux >> offset) & mask;
-		if (pfunc != (function & mask)) {
-			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
-				ident, function, m, pfunc);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void portmux_setup(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-	s8 offset = port_mux[ident];
-	u16 pmux, mask;
-
-	if (offset == -1)
-		return;
-
-	pmux = bfin_read_PORT_MUX();
-	if (offset == 1)
-		mask = 3;
-	else
-		mask = 1;
-
-	pmux &= ~(mask << offset);
-	pmux |= ((function & mask) << offset);
-
-	bfin_write_PORT_MUX(pmux);
-}
-#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
-static int portmux_group_check(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
-	u16 pin, gpiopin, pfunc;
-
-	for (pin = 0; pin < GPIO_BANKSIZE; ++pin) {
-		if (offset != pmux_offset[gpio_bank(ident)][pin])
-			continue;
-
-		gpiopin = gpio_bank(ident) * GPIO_BANKSIZE + pin;
-		if (gpiopin == ident)
-			continue;
-		if (!is_reserved(peri, gpiopin, 1))
-			continue;
-
-		pfunc = *port_mux[gpio_bank(ident)];
-		pfunc = (pfunc >> offset) & 3;
-		if (pfunc != function) {
-			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
-				ident, function, gpiopin, pfunc);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-inline void portmux_setup(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
-	u16 pmux;
-
-	pmux = *port_mux[gpio_bank(ident)];
-	if  (((pmux >> offset) & 3) == function)
-		return;
-	pmux &= ~(3 << offset);
-	pmux |= (function & 3) << offset;
-	*port_mux[gpio_bank(ident)] = pmux;
-	SSYNC();
-}
-#else
-# define portmux_setup(...)  do { } while (0)
-static int portmux_group_check(unsigned short per)
-{
-	return 0;
-}
-#endif
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin General Purpose Ports Access Functions
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-*
-*
-* DESCRIPTION: These functions abstract direct register access
-*              to Blackfin processor General Purpose
-*              Ports Regsiters
-*
-* CAUTION: These functions do not belong to the GPIO Driver API
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-/* Set a specific bit */
-
-#define SET_GPIO(name) \
-void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
-{ \
-	unsigned long flags; \
-	flags = hard_local_irq_save(); \
-	if (arg) \
-		gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
-	else \
-		gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
-	AWA_DUMMY_READ(name); \
-	hard_local_irq_restore(flags); \
-} \
-EXPORT_SYMBOL(set_gpio_ ## name);
-
-SET_GPIO(dir)   /* set_gpio_dir() */
-SET_GPIO(inen)  /* set_gpio_inen() */
-SET_GPIO(polar) /* set_gpio_polar() */
-SET_GPIO(edge)  /* set_gpio_edge() */
-SET_GPIO(both)  /* set_gpio_both() */
-
-
-#define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
-{ \
-	unsigned long flags; \
-	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		flags = hard_local_irq_save(); \
-	if (arg) \
-		gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
-	else \
-		gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
-	if (ANOMALY_05000311 || ANOMALY_05000323) { \
-		AWA_DUMMY_READ(name); \
-		hard_local_irq_restore(flags); \
-	} \
-} \
-EXPORT_SYMBOL(set_gpio_ ## name);
-
-SET_GPIO_SC(maska)
-SET_GPIO_SC(maskb)
-SET_GPIO_SC(data)
-
-void set_gpio_toggle(unsigned gpio)
-{
-	unsigned long flags;
-	if (ANOMALY_05000311 || ANOMALY_05000323)
-		flags = hard_local_irq_save();
-	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-	if (ANOMALY_05000311 || ANOMALY_05000323) {
-		AWA_DUMMY_READ(toggle);
-		hard_local_irq_restore(flags);
-	}
-}
-EXPORT_SYMBOL(set_gpio_toggle);
-
-
-/*Set current PORT date (16-bit word)*/
-
-#define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
-{ \
-	unsigned long flags; \
-	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		flags = hard_local_irq_save(); \
-	gpio_array[gpio_bank(gpio)]->name = arg; \
-	if (ANOMALY_05000311 || ANOMALY_05000323) { \
-		AWA_DUMMY_READ(name); \
-		hard_local_irq_restore(flags); \
-	} \
-} \
-EXPORT_SYMBOL(set_gpiop_ ## name);
-
-SET_GPIO_P(data)
-SET_GPIO_P(dir)
-SET_GPIO_P(inen)
-SET_GPIO_P(polar)
-SET_GPIO_P(edge)
-SET_GPIO_P(both)
-SET_GPIO_P(maska)
-SET_GPIO_P(maskb)
-
-/* Get a specific bit */
-#define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned gpio) \
-{ \
-	unsigned long flags; \
-	unsigned short ret; \
-	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		flags = hard_local_irq_save(); \
-	ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
-	if (ANOMALY_05000311 || ANOMALY_05000323) { \
-		AWA_DUMMY_READ(name); \
-		hard_local_irq_restore(flags); \
-	} \
-	return ret; \
-} \
-EXPORT_SYMBOL(get_gpio_ ## name);
-
-GET_GPIO(data)
-GET_GPIO(dir)
-GET_GPIO(inen)
-GET_GPIO(polar)
-GET_GPIO(edge)
-GET_GPIO(both)
-GET_GPIO(maska)
-GET_GPIO(maskb)
-
-/*Get current PORT date (16-bit word)*/
-
-#define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned gpio) \
-{ \
-	unsigned long flags; \
-	unsigned short ret; \
-	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		flags = hard_local_irq_save(); \
-	ret = (gpio_array[gpio_bank(gpio)]->name); \
-	if (ANOMALY_05000311 || ANOMALY_05000323) { \
-		AWA_DUMMY_READ(name); \
-		hard_local_irq_restore(flags); \
-	} \
-	return ret; \
-} \
-EXPORT_SYMBOL(get_gpiop_ ## name);
-
-GET_GPIO_P(data)
-GET_GPIO_P(dir)
-GET_GPIO_P(inen)
-GET_GPIO_P(polar)
-GET_GPIO_P(edge)
-GET_GPIO_P(both)
-GET_GPIO_P(maska)
-GET_GPIO_P(maskb)
-
-
-#ifdef CONFIG_PM
-DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM);
-
-static const unsigned int sic_iwr_irqs[] = {
-#if defined(BF533_FAMILY)
-	IRQ_PROG_INTB
-#elif defined(BF537_FAMILY)
-	IRQ_PF_INTB_WATCH, IRQ_PORTG_INTB, IRQ_PH_INTB_MAC_TX
-#elif defined(BF538_FAMILY)
-	IRQ_PORTF_INTB
-#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
-	IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
-#elif defined(BF561_FAMILY)
-	IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
-#else
-# error no SIC_IWR defined
-#endif
-};
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin PM Setup API
-*
-* INPUTS/OUTPUTS:
-* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
-* type -
-*	PM_WAKE_RISING
-*	PM_WAKE_FALLING
-*	PM_WAKE_HIGH
-*	PM_WAKE_LOW
-*	PM_WAKE_BOTH_EDGES
-*
-* DESCRIPTION: Blackfin PM Driver API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
-{
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	flags = hard_local_irq_save();
-	if (ctrl)
-		reserve(wakeup, gpio);
-	else
-		unreserve(wakeup, gpio);
-
-	set_gpio_maskb(gpio, ctrl);
-	hard_local_irq_restore(flags);
-
-	return 0;
-}
-
-int bfin_gpio_pm_standby_ctrl(unsigned ctrl)
-{
-	u16 bank, mask, i;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = map_entry(wakeup, i);
-		bank = gpio_bank(i);
-
-		if (mask)
-			bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
-	}
-	return 0;
-}
-
-void bfin_gpio_pm_hibernate_suspend(void)
-{
-	int i, bank;
-
-#ifdef BF538_FAMILY
-	for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
-		port_fer_saved[i] = *port_fer[i];
-#endif
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		bank = gpio_bank(i);
-
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-		gpio_bank_saved[bank].fer = *port_fer[bank];
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
-		gpio_bank_saved[bank].mux = *port_mux[bank];
-#else
-		if (bank == 0)
-			gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
-#endif
-#endif
-		gpio_bank_saved[bank].data  = gpio_array[bank]->data;
-		gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
-		gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
-		gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
-		gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
-		gpio_bank_saved[bank].both  = gpio_array[bank]->both;
-		gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
-	}
-
-#ifdef BFIN_SPECIAL_GPIO_BANKS
-	bfin_special_gpio_pm_hibernate_suspend();
-#endif
-
-	AWA_DUMMY_READ(maska);
-}
-
-void bfin_gpio_pm_hibernate_restore(void)
-{
-	int i, bank;
-
-#ifdef BF538_FAMILY
-	for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
-		*port_fer[i] = port_fer_saved[i];
-#endif
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		bank = gpio_bank(i);
-
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
-		*port_mux[bank] = gpio_bank_saved[bank].mux;
-#else
-		if (bank == 0)
-			bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
-#endif
-		*port_fer[bank] = gpio_bank_saved[bank].fer;
-#endif
-		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						& gpio_bank_saved[bank].dir;
-		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
-		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
-		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
-		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
-	}
-
-#ifdef BFIN_SPECIAL_GPIO_BANKS
-	bfin_special_gpio_pm_hibernate_restore();
-#endif
-
-	AWA_DUMMY_READ(maska);
-}
-
-
-#endif
-
-/***********************************************************
-*
-* FUNCTIONS:	Blackfin Peripheral Resource Allocation
-*		and PortMux Setup
-*
-* INPUTS/OUTPUTS:
-* per	Peripheral Identifier
-* label	String
-*
-* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-int peripheral_request(unsigned short per, const char *label)
-{
-	unsigned long flags;
-	unsigned short ident = P_IDENT(per);
-
-	/*
-	 * Don't cares are pins with only one dedicated function
-	 */
-
-	if (per & P_DONTCARE)
-		return 0;
-
-	if (!(per & P_DEFINED))
-		return -ENODEV;
-
-	BUG_ON(ident >= MAX_RESOURCES);
-
-	flags = hard_local_irq_save();
-
-	/* If a pin can be muxed as either GPIO or peripheral, make
-	 * sure it is not already a GPIO pin when we request it.
-	 */
-	if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "%s: Peripheral %d is already reserved as GPIO by %s !\n",
-		       __func__, ident, get_label(ident));
-		hard_local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	if (unlikely(is_reserved(peri, ident, 1))) {
-
-		/*
-		 * Pin functions like AMC address strobes my
-		 * be requested and used by several drivers
-		 */
-
-		if (!(per & P_MAYSHARE)) {
-			/*
-			 * Allow that the identical pin function can
-			 * be requested from the same driver twice
-			 */
-
-			if (cmp_label(ident, label) == 0)
-				goto anyway;
-
-			if (system_state == SYSTEM_BOOTING)
-				dump_stack();
-			printk(KERN_ERR
-			       "%s: Peripheral %d function %d is already reserved by %s !\n",
-			       __func__, ident, P_FUNCT2MUX(per), get_label(ident));
-			hard_local_irq_restore(flags);
-			return -EBUSY;
-		}
-	}
-
-	if (unlikely(portmux_group_check(per))) {
-		hard_local_irq_restore(flags);
-		return -EBUSY;
-	}
- anyway:
-	reserve(peri, ident);
-
-	portmux_setup(per);
-	port_setup(ident, PERIPHERAL_USAGE);
-
-	hard_local_irq_restore(flags);
-	set_label(ident, label);
-
-	return 0;
-}
-EXPORT_SYMBOL(peripheral_request);
-
-int peripheral_request_list(const unsigned short per[], const char *label)
-{
-	u16 cnt;
-	int ret;
-
-	for (cnt = 0; per[cnt] != 0; cnt++) {
-
-		ret = peripheral_request(per[cnt], label);
-
-		if (ret < 0) {
-			for ( ; cnt > 0; cnt--)
-				peripheral_free(per[cnt - 1]);
-
-			return ret;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(peripheral_request_list);
-
-void peripheral_free(unsigned short per)
-{
-	unsigned long flags;
-	unsigned short ident = P_IDENT(per);
-
-	if (per & P_DONTCARE)
-		return;
-
-	if (!(per & P_DEFINED))
-		return;
-
-	flags = hard_local_irq_save();
-
-	if (unlikely(!is_reserved(peri, ident, 0))) {
-		hard_local_irq_restore(flags);
-		return;
-	}
-
-	if (!(per & P_MAYSHARE))
-		port_setup(ident, GPIO_USAGE);
-
-	unreserve(peri, ident);
-
-	set_label(ident, "free");
-
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(peripheral_free);
-
-void peripheral_free_list(const unsigned short per[])
-{
-	u16 cnt;
-	for (cnt = 0; per[cnt] != 0; cnt++)
-		peripheral_free(per[cnt]);
-}
-EXPORT_SYMBOL(peripheral_free_list);
-
-/***********************************************************
-*
-* FUNCTIONS: Blackfin GPIO Driver
-*
-* INPUTS/OUTPUTS:
-* gpio	PIO Number between 0 and MAX_BLACKFIN_GPIOS
-* label	String
-*
-* DESCRIPTION: Blackfin GPIO Driver API
-*
-* CAUTION:
-*************************************************************
-* MODIFICATION HISTORY :
-**************************************************************/
-
-int bfin_gpio_request(unsigned gpio, const char *label)
-{
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	flags = hard_local_irq_save();
-
-	/*
-	 * Allow that the identical GPIO can
-	 * be requested from the same driver twice
-	 * Do nothing and return -
-	 */
-
-	if (cmp_label(gpio, label) == 0) {
-		hard_local_irq_restore(flags);
-		return 0;
-	}
-
-	if (unlikely(is_reserved(gpio, gpio, 1))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
-		       gpio, get_label(gpio));
-		hard_local_irq_restore(flags);
-		return -EBUSY;
-	}
-	if (unlikely(is_reserved(peri, gpio, 1))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
-		       gpio, get_label(gpio));
-		hard_local_irq_restore(flags);
-		return -EBUSY;
-	}
-	if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
-		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
-		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
-	} else {	/* Reset POLAR setting when acquiring a gpio for the first time */
-		set_gpio_polar(gpio, 0);
-	}
-
-	reserve(gpio, gpio);
-	set_label(gpio, label);
-
-	hard_local_irq_restore(flags);
-
-	port_setup(gpio, GPIO_USAGE);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_request);
-
-void bfin_gpio_free(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-
-	might_sleep();
-
-	flags = hard_local_irq_save();
-
-	if (unlikely(!is_reserved(gpio, gpio, 0))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		gpio_error(gpio);
-		hard_local_irq_restore(flags);
-		return;
-	}
-
-	unreserve(gpio, gpio);
-
-	set_label(gpio, "free");
-
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(bfin_gpio_free);
-
-#ifdef BFIN_SPECIAL_GPIO_BANKS
-DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
-
-int bfin_special_gpio_request(unsigned gpio, const char *label)
-{
-	unsigned long flags;
-
-	flags = hard_local_irq_save();
-
-	/*
-	 * Allow that the identical GPIO can
-	 * be requested from the same driver twice
-	 * Do nothing and return -
-	 */
-
-	if (cmp_label(gpio, label) == 0) {
-		hard_local_irq_restore(flags);
-		return 0;
-	}
-
-	if (unlikely(is_reserved(special_gpio, gpio, 1))) {
-		hard_local_irq_restore(flags);
-		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
-		       gpio, get_label(gpio));
-
-		return -EBUSY;
-	}
-	if (unlikely(is_reserved(peri, gpio, 1))) {
-		hard_local_irq_restore(flags);
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
-		       gpio, get_label(gpio));
-
-		return -EBUSY;
-	}
-
-	reserve(special_gpio, gpio);
-	reserve(peri, gpio);
-
-	set_label(gpio, label);
-	hard_local_irq_restore(flags);
-	port_setup(gpio, GPIO_USAGE);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_special_gpio_request);
-
-void bfin_special_gpio_free(unsigned gpio)
-{
-	unsigned long flags;
-
-	might_sleep();
-
-	flags = hard_local_irq_save();
-
-	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
-		gpio_error(gpio);
-		hard_local_irq_restore(flags);
-		return;
-	}
-
-	unreserve(special_gpio, gpio);
-	unreserve(peri, gpio);
-	set_label(gpio, "free");
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(bfin_special_gpio_free);
-#endif
-
-
-int bfin_gpio_irq_request(unsigned gpio, const char *label)
-{
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	flags = hard_local_irq_save();
-
-	if (unlikely(is_reserved(peri, gpio, 1))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
-		       gpio, get_label(gpio));
-		hard_local_irq_restore(flags);
-		return -EBUSY;
-	}
-	if (unlikely(is_reserved(gpio, gpio, 1)))
-		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! "
-		       "(Documentation/blackfin/bfin-gpio-notes.txt)\n",
-		       gpio, get_label(gpio));
-
-	reserve(gpio_irq, gpio);
-	set_label(gpio, label);
-
-	hard_local_irq_restore(flags);
-
-	port_setup(gpio, GPIO_USAGE);
-
-	return 0;
-}
-
-void bfin_gpio_irq_free(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-
-	flags = hard_local_irq_save();
-
-	if (unlikely(!is_reserved(gpio_irq, gpio, 0))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		gpio_error(gpio);
-		hard_local_irq_restore(flags);
-		return;
-	}
-
-	unreserve(gpio_irq, gpio);
-
-	set_label(gpio, "free");
-
-	hard_local_irq_restore(flags);
-}
-
-static inline void __bfin_gpio_direction_input(unsigned gpio)
-{
-	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-}
-
-int bfin_gpio_direction_input(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (unlikely(!is_reserved(gpio, gpio, 0))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	flags = hard_local_irq_save();
-	__bfin_gpio_direction_input(gpio);
-	AWA_DUMMY_READ(inen);
-	hard_local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_input);
-
-void bfin_gpio_irq_prepare(unsigned gpio)
-{
-	port_setup(gpio, GPIO_USAGE);
-}
-
-void bfin_gpio_set_value(unsigned gpio, int arg)
-{
-	if (arg)
-		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
-	else
-		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
-}
-EXPORT_SYMBOL(bfin_gpio_set_value);
-
-int bfin_gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	if (unlikely(!is_reserved(gpio, gpio, 0))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	flags = hard_local_irq_save();
-
-	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-	gpio_set_value(gpio, value);
-	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-
-	AWA_DUMMY_READ(dir);
-	hard_local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_output);
-
-int bfin_gpio_get_value(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (unlikely(get_gpio_edge(gpio))) {
-		int ret;
-		flags = hard_local_irq_save();
-		set_gpio_edge(gpio, 0);
-		ret = get_gpio_data(gpio);
-		set_gpio_edge(gpio, 1);
-		hard_local_irq_restore(flags);
-		return ret;
-	} else
-		return get_gpio_data(gpio);
-}
-EXPORT_SYMBOL(bfin_gpio_get_value);
-
-/* If we are booting from SPI and our board lacks a strong enough pull up,
- * the core can reset and execute the bootrom faster than the resistor can
- * pull the signal logically high.  To work around this (common) error in
- * board design, we explicitly set the pin back to GPIO mode, force /CS
- * high, and wait for the electrons to do their thing.
- *
- * This function only makes sense to be called from reset code, but it
- * lives here as we need to force all the GPIO states w/out going through
- * BUG() checks and such.
- */
-void bfin_reset_boot_spi_cs(unsigned short pin)
-{
-	unsigned short gpio = P_IDENT(pin);
-	port_setup(gpio, GPIO_USAGE);
-	gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
-	AWA_DUMMY_READ(data_set);
-	udelay(1);
-}
-
-#if defined(CONFIG_PROC_FS)
-static int gpio_proc_show(struct seq_file *m, void *v)
-{
-	int c, irq, gpio;
-
-	for (c = 0; c < MAX_RESOURCES; c++) {
-		irq = is_reserved(gpio_irq, c, 1);
-		gpio = is_reserved(gpio, c, 1);
-		if (!check_gpio(c) && (gpio || irq))
-			seq_printf(m, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c,
-				 get_label(c), (gpio && irq) ? " *" : "",
-				 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
-		else if (is_reserved(peri, c, 1))
-			seq_printf(m, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c));
-		else
-			continue;
-	}
-
-	return 0;
-}
-
-static int gpio_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, gpio_proc_show, NULL);
-}
-
-static const struct file_operations gpio_proc_ops = {
-	.open		= gpio_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static __init int gpio_register_proc(void)
-{
-	struct proc_dir_entry *proc_gpio;
-
-	proc_gpio = proc_create("gpio", 0, NULL, &gpio_proc_ops);
-	return proc_gpio == NULL;
-}
-__initcall(gpio_register_proc);
-#endif
-
-#ifdef CONFIG_GPIOLIB
-static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	return bfin_gpio_direction_input(gpio);
-}
-
-static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-{
-	return bfin_gpio_direction_output(gpio, level);
-}
-
-static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return !!bfin_gpio_get_value(gpio);
-}
-
-static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	return bfin_gpio_set_value(gpio, value);
-}
-
-static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
-{
-	return bfin_gpio_request(gpio, chip->label);
-}
-
-static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
-{
-	return bfin_gpio_free(gpio);
-}
-
-static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	return gpio + GPIO_IRQ_BASE;
-}
-
-static struct gpio_chip bfin_chip = {
-	.label			= "BFIN-GPIO",
-	.direction_input	= bfin_gpiolib_direction_input,
-	.get			= bfin_gpiolib_get_value,
-	.direction_output	= bfin_gpiolib_direction_output,
-	.set			= bfin_gpiolib_set_value,
-	.request		= bfin_gpiolib_gpio_request,
-	.free			= bfin_gpiolib_gpio_free,
-	.to_irq			= bfin_gpiolib_gpio_to_irq,
-	.base			= 0,
-	.ngpio			= MAX_BLACKFIN_GPIOS,
-};
-
-static int __init bfin_gpiolib_setup(void)
-{
-	return gpiochip_add_data(&bfin_chip, NULL);
-}
-arch_initcall(bfin_gpiolib_setup);
-#endif
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
deleted file mode 100644
index 68096e8f787f..000000000000
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * arch/blackfin/kernel/bfin_ksyms.c - exports for random symbols
- *
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/uaccess.h>
-
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-#include <asm/irq_handler.h>
-
-/* Allow people to have their own Blackfin exception handler in a module */
-EXPORT_SYMBOL(bfin_return_from_exception);
-
-/* All the Blackfin cache functions: mach-common/cache.S */
-EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
-EXPORT_SYMBOL(blackfin_icache_flush_range);
-EXPORT_SYMBOL(blackfin_dcache_flush_range);
-EXPORT_SYMBOL(blackfin_dflush_page);
-
-/* The following are special because they're not called
- * explicitly (the C compiler generates them).  Fortunately,
- * their interface isn't gonna change any time soon now, so
- * it's OK to leave it out of version control.
- */
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memchr);
-
-/*
- * Because string functions are both inline and exported functions and
- * folder arch/blackfin/lib is configured as a library path in Makefile,
- * symbols exported in folder lib  is not linked into built-in.o but
- * inlined only. In order to export string symbols to kernel module
- * properly, they should be exported here.
- */
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __smulsi3_highpart(void);
-extern void __umulsi3_highpart(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__umulsi3_highpart);
-EXPORT_SYMBOL(__smulsi3_highpart);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-
-/* Input/output symbols: lib/{in,out}s.S */
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(outsw_8);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insw_8);
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(insl_16);
-
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(__raw_atomic_add_asm);
-EXPORT_SYMBOL(__raw_atomic_xadd_asm);
-EXPORT_SYMBOL(__raw_atomic_and_asm);
-EXPORT_SYMBOL(__raw_atomic_or_asm);
-EXPORT_SYMBOL(__raw_atomic_xor_asm);
-EXPORT_SYMBOL(__raw_atomic_test_asm);
-
-EXPORT_SYMBOL(__raw_xchg_1_asm);
-EXPORT_SYMBOL(__raw_xchg_2_asm);
-EXPORT_SYMBOL(__raw_xchg_4_asm);
-EXPORT_SYMBOL(__raw_cmpxchg_1_asm);
-EXPORT_SYMBOL(__raw_cmpxchg_2_asm);
-EXPORT_SYMBOL(__raw_cmpxchg_4_asm);
-EXPORT_SYMBOL(__raw_spin_is_locked_asm);
-EXPORT_SYMBOL(__raw_spin_lock_asm);
-EXPORT_SYMBOL(__raw_spin_trylock_asm);
-EXPORT_SYMBOL(__raw_spin_unlock_asm);
-EXPORT_SYMBOL(__raw_read_lock_asm);
-EXPORT_SYMBOL(__raw_read_trylock_asm);
-EXPORT_SYMBOL(__raw_read_unlock_asm);
-EXPORT_SYMBOL(__raw_write_lock_asm);
-EXPORT_SYMBOL(__raw_write_trylock_asm);
-EXPORT_SYMBOL(__raw_write_unlock_asm);
-EXPORT_SYMBOL(__raw_bit_set_asm);
-EXPORT_SYMBOL(__raw_bit_clear_asm);
-EXPORT_SYMBOL(__raw_bit_toggle_asm);
-EXPORT_SYMBOL(__raw_bit_test_asm);
-EXPORT_SYMBOL(__raw_bit_test_set_asm);
-EXPORT_SYMBOL(__raw_bit_test_clear_asm);
-EXPORT_SYMBOL(__raw_bit_test_toggle_asm);
-EXPORT_SYMBOL(__raw_uncached_fetch_asm);
-#ifdef __ARCH_SYNC_CORE_DCACHE
-EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
-EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
-#endif
-#endif
-
-#ifdef CONFIG_FUNCTION_TRACER
-extern void _mcount(void);
-EXPORT_SYMBOL(_mcount);
-#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile
deleted file mode 100644
index 394d0b1b28fe..000000000000
--- a/arch/blackfin/kernel/cplb-mpu/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# arch/blackfin/kernel/cplb-nompu/Makefile
-#
-
-obj-y := cplbinit.o cplbmgr.o
-
-CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
-		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
-		    -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \
-		    -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
deleted file mode 100644
index c15fd05f0b09..000000000000
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Blackfin CPLB initialization
- *
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-#include <asm/mem_map.h>
-
-struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS];
-struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS];
-
-int first_switched_icplb, first_switched_dcplb;
-int first_mask_dcplb;
-
-void __init generate_cplb_tables_cpu(unsigned int cpu)
-{
-	int i_d, i_i;
-	unsigned long addr;
-	unsigned long d_data, i_data;
-	unsigned long d_cache = 0, i_cache = 0;
-
-	printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
-
-#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
-	i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-#endif
-
-#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
-	d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
-	d_cache |= CPLB_L1_AOW | CPLB_WT;
-#endif
-#endif
-
-	i_d = i_i = 0;
-
-	/* Set up the zero page.  */
-	dcplb_tbl[cpu][i_d].addr = 0;
-	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
-
-	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
-
-	/* Cover kernel memory with 4M pages.  */
-	addr = 0;
-	d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY;
-	i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB;
-
-	for (; addr < memory_start; addr += 4 * 1024 * 1024) {
-		dcplb_tbl[cpu][i_d].addr = addr;
-		dcplb_tbl[cpu][i_d++].data = d_data;
-		icplb_tbl[cpu][i_i].addr = addr;
-		icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0);
-	}
-
-#ifdef CONFIG_ROMKERNEL
-	/* Cover kernel XIP flash area */
-	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
-	dcplb_tbl[cpu][i_d].addr = addr;
-	dcplb_tbl[cpu][i_d++].data = d_data | CPLB_USER_RD;
-	icplb_tbl[cpu][i_i].addr = addr;
-	icplb_tbl[cpu][i_i++].data = i_data | CPLB_USER_RD;
-#endif
-
-	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0
-	dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu);
-	dcplb_tbl[cpu][i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
-#endif
-#if L1_CODE_LENGTH > 0
-	icplb_tbl[cpu][i_i].addr = get_l1_code_start_cpu(cpu);
-	icplb_tbl[cpu][i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-#endif
-
-	/* Cover L2 memory */
-#if L2_LENGTH > 0
-	dcplb_tbl[cpu][i_d].addr = L2_START;
-	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
-	icplb_tbl[cpu][i_i].addr = L2_START;
-	icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
-#endif
-
-	first_mask_dcplb = i_d;
-	first_switched_dcplb = i_d + (1 << page_mask_order);
-	first_switched_icplb = i_i;
-
-	while (i_d < MAX_CPLBS)
-		dcplb_tbl[cpu][i_d++].data = 0;
-	while (i_i < MAX_CPLBS)
-		icplb_tbl[cpu][i_i++].data = 0;
-}
-
-void __init generate_cplb_tables_all(void)
-{
-}
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
deleted file mode 100644
index b56bd8514b7c..000000000000
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * Blackfin CPLB exception handling for when MPU in on
- *
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-
-#include <asm/blackfin.h>
-#include <asm/cacheflush.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-#include <asm/mmu_context.h>
-
-/*
- * WARNING
- *
- * This file is compiled with certain -ffixed-reg options.  We have to
- * make sure not to call any functions here that could clobber these
- * registers.
- */
-
-int page_mask_nelts;
-int page_mask_order;
-unsigned long *current_rwx_mask[NR_CPUS];
-
-int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
-int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
-int nr_cplb_flush[NR_CPUS];
-
-#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
-#define MGR_ATTR __attribute__((l1_text))
-#else
-#define MGR_ATTR
-#endif
-
-/*
- * Given the contents of the status register, return the index of the
- * CPLB that caused the fault.
- */
-static inline int faulting_cplb_index(int status)
-{
-	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
-	return 30 - signbits;
-}
-
-/*
- * Given the contents of the status register and the DCPLB_DATA contents,
- * return true if a write access should be permitted.
- */
-static inline int write_permitted(int status, unsigned long data)
-{
-	if (status & FAULT_USERSUPV)
-		return !!(data & CPLB_SUPV_WR);
-	else
-		return !!(data & CPLB_USER_WR);
-}
-
-/* Counters to implement round-robin replacement.  */
-static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS];
-
-/*
- * Find an ICPLB entry to be evicted and return its index.
- */
-MGR_ATTR static int evict_one_icplb(unsigned int cpu)
-{
-	int i;
-	for (i = first_switched_icplb; i < MAX_CPLBS; i++)
-		if ((icplb_tbl[cpu][i].data & CPLB_VALID) == 0)
-			return i;
-	i = first_switched_icplb + icplb_rr_index[cpu];
-	if (i >= MAX_CPLBS) {
-		i -= MAX_CPLBS - first_switched_icplb;
-		icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb;
-	}
-	icplb_rr_index[cpu]++;
-	return i;
-}
-
-MGR_ATTR static int evict_one_dcplb(unsigned int cpu)
-{
-	int i;
-	for (i = first_switched_dcplb; i < MAX_CPLBS; i++)
-		if ((dcplb_tbl[cpu][i].data & CPLB_VALID) == 0)
-			return i;
-	i = first_switched_dcplb + dcplb_rr_index[cpu];
-	if (i >= MAX_CPLBS) {
-		i -= MAX_CPLBS - first_switched_dcplb;
-		dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb;
-	}
-	dcplb_rr_index[cpu]++;
-	return i;
-}
-
-MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
-{
-	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
-	int status = bfin_read_DCPLB_STATUS();
-	unsigned long *mask;
-	int idx;
-	unsigned long d_data;
-
-	nr_dcplb_miss[cpu]++;
-
-	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
-	if (bfin_addr_dcacheable(addr)) {
-		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
-		d_data |= CPLB_L1_AOW | CPLB_WT;
-# endif
-	}
-#endif
-
-	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
-		addr = L2_START;
-		d_data = L2_DMEMORY;
-	} else if (addr >= physical_mem_end) {
-		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
-			mask = current_rwx_mask[cpu];
-			if (mask) {
-				int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
-				int idx = page >> 5;
-				int bit = 1 << (page & 31);
-
-				if (mask[idx] & bit)
-					d_data |= CPLB_USER_RD;
-			}
-#endif
-		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
-		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
-			addr &= ~(1 * 1024 * 1024 - 1);
-			d_data &= ~PAGE_SIZE_4KB;
-			d_data |= PAGE_SIZE_1MB;
-		} else
-			return CPLB_PROT_VIOL;
-	} else if (addr >= _ramend) {
-		d_data |= CPLB_USER_RD | CPLB_USER_WR;
-		if (reserved_mem_dcache_on)
-			d_data |= CPLB_L1_CHBL;
-	} else {
-		mask = current_rwx_mask[cpu];
-		if (mask) {
-			int page = addr >> PAGE_SHIFT;
-			int idx = page >> 5;
-			int bit = 1 << (page & 31);
-
-			if (mask[idx] & bit)
-				d_data |= CPLB_USER_RD;
-
-			mask += page_mask_nelts;
-			if (mask[idx] & bit)
-				d_data |= CPLB_USER_WR;
-		}
-	}
-	idx = evict_one_dcplb(cpu);
-
-	addr &= PAGE_MASK;
-	dcplb_tbl[cpu][idx].addr = addr;
-	dcplb_tbl[cpu][idx].data = d_data;
-
-	_disable_dcplb();
-	bfin_write32(DCPLB_DATA0 + idx * 4, d_data);
-	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	_enable_dcplb();
-
-	return 0;
-}
-
-MGR_ATTR static noinline int icplb_miss(unsigned int cpu)
-{
-	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
-	int status = bfin_read_ICPLB_STATUS();
-	int idx;
-	unsigned long i_data;
-
-	nr_icplb_miss[cpu]++;
-
-	/* If inside the uncached DMA region, fault.  */
-	if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend)
-		return CPLB_PROT_VIOL;
-
-	if (status & FAULT_USERSUPV)
-		nr_icplb_supv_miss[cpu]++;
-
-	/*
-	 * First, try to find a CPLB that matches this address.  If we
-	 * find one, then the fact that we're in the miss handler means
-	 * that the instruction crosses a page boundary.
-	 */
-	for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) {
-		if (icplb_tbl[cpu][idx].data & CPLB_VALID) {
-			unsigned long this_addr = icplb_tbl[cpu][idx].addr;
-			if (this_addr <= addr && this_addr + PAGE_SIZE > addr) {
-				addr += PAGE_SIZE;
-				break;
-			}
-		}
-	}
-
-	i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
-
-#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
-	/*
-	 * Normal RAM, and possibly the reserved memory area, are
-	 * cacheable.
-	 */
-	if (addr < _ramend ||
-	    (addr < physical_mem_end && reserved_mem_icache_on))
-		i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-#endif
-
-	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
-		addr = L2_START;
-		i_data = L2_IMEMORY;
-	} else if (addr >= physical_mem_end) {
-		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-			if (!(status & FAULT_USERSUPV)) {
-				unsigned long *mask = current_rwx_mask[cpu];
-
-				if (mask) {
-					int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
-					int idx = page >> 5;
-					int bit = 1 << (page & 31);
-
-					mask += 2 * page_mask_nelts;
-					if (mask[idx] & bit)
-						i_data |= CPLB_USER_RD;
-				}
-			}
-		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
-		    && (status & FAULT_USERSUPV)) {
-			addr &= ~(1 * 1024 * 1024 - 1);
-			i_data &= ~PAGE_SIZE_4KB;
-			i_data |= PAGE_SIZE_1MB;
-		} else
-		    return CPLB_PROT_VIOL;
-	} else if (addr >= _ramend) {
-		i_data |= CPLB_USER_RD;
-		if (reserved_mem_icache_on)
-			i_data |= CPLB_L1_CHBL;
-	} else {
-		/*
-		 * Two cases to distinguish - a supervisor access must
-		 * necessarily be for a module page; we grant it
-		 * unconditionally (could do better here in the future).
-		 * Otherwise, check the x bitmap of the current process.
-		 */
-		if (!(status & FAULT_USERSUPV)) {
-			unsigned long *mask = current_rwx_mask[cpu];
-
-			if (mask) {
-				int page = addr >> PAGE_SHIFT;
-				int idx = page >> 5;
-				int bit = 1 << (page & 31);
-
-				mask += 2 * page_mask_nelts;
-				if (mask[idx] & bit)
-					i_data |= CPLB_USER_RD;
-			}
-		}
-	}
-	idx = evict_one_icplb(cpu);
-	addr &= PAGE_MASK;
-	icplb_tbl[cpu][idx].addr = addr;
-	icplb_tbl[cpu][idx].data = i_data;
-
-	_disable_icplb();
-	bfin_write32(ICPLB_DATA0 + idx * 4, i_data);
-	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	_enable_icplb();
-
-	return 0;
-}
-
-MGR_ATTR static noinline int dcplb_protection_fault(unsigned int cpu)
-{
-	int status = bfin_read_DCPLB_STATUS();
-
-	nr_dcplb_prot[cpu]++;
-
-	if (status & FAULT_RW) {
-		int idx = faulting_cplb_index(status);
-		unsigned long data = dcplb_tbl[cpu][idx].data;
-		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
-		    write_permitted(status, data)) {
-			data |= CPLB_DIRTY;
-			dcplb_tbl[cpu][idx].data = data;
-			bfin_write32(DCPLB_DATA0 + idx * 4, data);
-			return 0;
-		}
-	}
-	return CPLB_PROT_VIOL;
-}
-
-MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
-{
-	int cause = seqstat & 0x3f;
-	unsigned int cpu = raw_smp_processor_id();
-	switch (cause) {
-	case 0x23:
-		return dcplb_protection_fault(cpu);
-	case 0x2C:
-		return icplb_miss(cpu);
-	case 0x26:
-		return dcplb_miss(cpu);
-	default:
-		return 1;
-	}
-}
-
-void flush_switched_cplbs(unsigned int cpu)
-{
-	int i;
-	unsigned long flags;
-
-	nr_cplb_flush[cpu]++;
-
-	flags = hard_local_irq_save();
-	_disable_icplb();
-	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
-		icplb_tbl[cpu][i].data = 0;
-		bfin_write32(ICPLB_DATA0 + i * 4, 0);
-	}
-	_enable_icplb();
-
-	_disable_dcplb();
-	for (i = first_switched_dcplb; i < MAX_CPLBS; i++) {
-		dcplb_tbl[cpu][i].data = 0;
-		bfin_write32(DCPLB_DATA0 + i * 4, 0);
-	}
-	_enable_dcplb();
-	hard_local_irq_restore(flags);
-
-}
-
-void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
-{
-	int i;
-	unsigned long addr = (unsigned long)masks;
-	unsigned long d_data;
-	unsigned long flags;
-
-	if (!masks) {
-		current_rwx_mask[cpu] = masks;
-		return;
-	}
-
-	flags = hard_local_irq_save();
-	current_rwx_mask[cpu] = masks;
-
-	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
-		addr = L2_START;
-		d_data = L2_DMEMORY;
-	} else {
-		d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
-		d_data |= CPLB_L1_CHBL;
-# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
-		d_data |= CPLB_L1_AOW | CPLB_WT;
-# endif
-#endif
-	}
-
-	_disable_dcplb();
-	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
-		dcplb_tbl[cpu][i].addr = addr;
-		dcplb_tbl[cpu][i].data = d_data;
-		bfin_write32(DCPLB_DATA0 + i * 4, d_data);
-		bfin_write32(DCPLB_ADDR0 + i * 4, addr);
-		addr += PAGE_SIZE;
-	}
-	_enable_dcplb();
-	hard_local_irq_restore(flags);
-}
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile
deleted file mode 100644
index 81baa27bc389..000000000000
--- a/arch/blackfin/kernel/cplb-nompu/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# arch/blackfin/kernel/cplb-nompu/Makefile
-#
-
-obj-y := cplbinit.o cplbmgr.o
-
-CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
-		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
-		    -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \
-		    -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
deleted file mode 100644
index b49a53b583d5..000000000000
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Blackfin CPLB initialization
- *
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-
-#include <asm/blackfin.h>
-#include <asm/cacheflush.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-#include <asm/mem_map.h>
-
-struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
-struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
-
-int first_switched_icplb PDT_ATTR;
-int first_switched_dcplb PDT_ATTR;
-
-struct cplb_boundary dcplb_bounds[9] PDT_ATTR;
-struct cplb_boundary icplb_bounds[9] PDT_ATTR;
-
-int icplb_nr_bounds PDT_ATTR;
-int dcplb_nr_bounds PDT_ATTR;
-
-void __init generate_cplb_tables_cpu(unsigned int cpu)
-{
-	int i_d, i_i;
-	unsigned long addr;
-	unsigned long cplb_pageflags, cplb_pagesize;
-
-	struct cplb_entry *d_tbl = dcplb_tbl[cpu];
-	struct cplb_entry *i_tbl = icplb_tbl[cpu];
-
-	printk(KERN_INFO "NOMPU: setting up cplb tables\n");
-
-	i_d = i_i = 0;
-
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-	/* Set up the zero page.  */
-	d_tbl[i_d].addr = 0;
-	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
-	i_tbl[i_i].addr = 0;
-	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
-#endif
-
-	/* Cover kernel memory with 4M pages.  */
-	addr = 0;
-
-#ifdef PAGE_SIZE_16MB
-	cplb_pageflags = PAGE_SIZE_16MB;
-	cplb_pagesize = SIZE_16M;
-#else
-	cplb_pageflags = PAGE_SIZE_4MB;
-	cplb_pagesize = SIZE_4M;
-#endif
-
-
-	for (; addr < memory_start; addr += cplb_pagesize) {
-		d_tbl[i_d].addr = addr;
-		d_tbl[i_d++].data = SDRAM_DGENERIC | cplb_pageflags;
-		i_tbl[i_i].addr = addr;
-		i_tbl[i_i++].data = SDRAM_IGENERIC | cplb_pageflags;
-	}
-
-#ifdef CONFIG_ROMKERNEL
-	/* Cover kernel XIP flash area */
-#ifdef CONFIG_BF60x
-	addr = CONFIG_ROM_BASE & ~(16 * 1024 * 1024 - 1);
-	d_tbl[i_d].addr = addr;
-	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_16MB;
-	i_tbl[i_i].addr = addr;
-	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_16MB;
-#else
-	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
-	d_tbl[i_d].addr = addr;
-	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB;
-	i_tbl[i_i].addr = addr;
-	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
-#endif
-#endif
-
-	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (cpu == 0) {
-		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-			d_tbl[i_d].addr = L1_DATA_A_START;
-			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
-		}
-		i_tbl[i_i].addr = L1_CODE_START;
-		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-	}
-#ifdef CONFIG_SMP
-	else {
-		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
-			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
-		}
-		i_tbl[i_i].addr = COREB_L1_CODE_START;
-		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-	}
-#endif
-	first_switched_dcplb = i_d;
-	first_switched_icplb = i_i;
-
-	BUG_ON(first_switched_dcplb > MAX_CPLBS);
-	BUG_ON(first_switched_icplb > MAX_CPLBS);
-
-	while (i_d < MAX_CPLBS)
-		d_tbl[i_d++].data = 0;
-	while (i_i < MAX_CPLBS)
-		i_tbl[i_i++].data = 0;
-}
-
-void __init generate_cplb_tables_all(void)
-{
-	unsigned long uncached_end;
-	int i_d, i_i;
-
-	i_d = 0;
-	/* Normal RAM, including MTD FS.  */
-#ifdef CONFIG_MTD_UCLINUX
-	uncached_end = memory_mtd_start + mtd_size;
-#else
-	uncached_end = memory_end;
-#endif
-	/*
-	 * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached
-	 * so that we don't have to use 4kB pages and cause CPLB thrashing
-	 */
-	if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION ||
-	    ((_ramend - uncached_end) >= 1 * 1024 * 1024))
-		dcplb_bounds[i_d].eaddr = uncached_end;
-	else
-		dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024 - 1);
-	dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
-	/* DMA uncached region.  */
-	if (DMA_UNCACHED_REGION) {
-		dcplb_bounds[i_d].eaddr = _ramend;
-		dcplb_bounds[i_d++].data = SDRAM_DNON_CHBL;
-	}
-	if (_ramend != physical_mem_end) {
-		/* Reserved memory.  */
-		dcplb_bounds[i_d].eaddr = physical_mem_end;
-		dcplb_bounds[i_d++].data = (reserved_mem_dcache_on ?
-					    SDRAM_DGENERIC : SDRAM_DNON_CHBL);
-	}
-	/* Addressing hole up to the async bank.  */
-	dcplb_bounds[i_d].eaddr = ASYNC_BANK0_BASE;
-	dcplb_bounds[i_d++].data = 0;
-	/* ASYNC banks.  */
-	dcplb_bounds[i_d].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
-	dcplb_bounds[i_d++].data = SDRAM_EBIU;
-	/* Addressing hole up to BootROM.  */
-	dcplb_bounds[i_d].eaddr = BOOT_ROM_START;
-	dcplb_bounds[i_d++].data = 0;
-	/* BootROM -- largest one should be less than 1 meg.  */
-	dcplb_bounds[i_d].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH;
-	dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
-	if (L2_LENGTH) {
-		/* Addressing hole up to L2 SRAM.  */
-		dcplb_bounds[i_d].eaddr = L2_START;
-		dcplb_bounds[i_d++].data = 0;
-		/* L2 SRAM.  */
-		dcplb_bounds[i_d].eaddr = L2_START + L2_LENGTH;
-		dcplb_bounds[i_d++].data = L2_DMEMORY;
-	}
-	dcplb_nr_bounds = i_d;
-	BUG_ON(dcplb_nr_bounds > ARRAY_SIZE(dcplb_bounds));
-
-	i_i = 0;
-	/* Normal RAM, including MTD FS.  */
-	icplb_bounds[i_i].eaddr = uncached_end;
-	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
-	if (_ramend != physical_mem_end) {
-		/* DMA uncached region.  */
-		if (DMA_UNCACHED_REGION) {
-			/* Normally this hole is caught by the async below.  */
-			icplb_bounds[i_i].eaddr = _ramend;
-			icplb_bounds[i_i++].data = 0;
-		}
-		/* Reserved memory.  */
-		icplb_bounds[i_i].eaddr = physical_mem_end;
-		icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
-					    SDRAM_IGENERIC : SDRAM_INON_CHBL);
-	}
-	/* Addressing hole up to the async bank.  */
-	icplb_bounds[i_i].eaddr = ASYNC_BANK0_BASE;
-	icplb_bounds[i_i++].data = 0;
-	/* ASYNC banks.  */
-	icplb_bounds[i_i].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
-	icplb_bounds[i_i++].data = SDRAM_EBIU;
-	/* Addressing hole up to BootROM.  */
-	icplb_bounds[i_i].eaddr = BOOT_ROM_START;
-	icplb_bounds[i_i++].data = 0;
-	/* BootROM -- largest one should be less than 1 meg.  */
-	icplb_bounds[i_i].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH;
-	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
-
-	if (L2_LENGTH) {
-		/* Addressing hole up to L2 SRAM.  */
-		icplb_bounds[i_i].eaddr = L2_START;
-		icplb_bounds[i_i++].data = 0;
-		/* L2 SRAM.  */
-		icplb_bounds[i_i].eaddr = L2_START + L2_LENGTH;
-		icplb_bounds[i_i++].data = L2_IMEMORY;
-	}
-	icplb_nr_bounds = i_i;
-	BUG_ON(icplb_nr_bounds > ARRAY_SIZE(icplb_bounds));
-}
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
deleted file mode 100644
index 79cc0f6dcdd5..000000000000
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Based on:     arch/blackfin/kernel/cplb-mpu/cplbmgr.c
- * Author:       Michael McTernan <mmcternan@airvana.com>
- *
- * Description:  CPLB miss handler.
- *
- * Modified:
- *               Copyright 2008 Airvana Inc.
- *               Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/kernel.h>
-#include <asm/blackfin.h>
-#include <asm/cplbinit.h>
-#include <asm/cplb.h>
-#include <asm/mmu_context.h>
-#include <asm/traps.h>
-
-/*
- * WARNING
- *
- * This file is compiled with certain -ffixed-reg options.  We have to
- * make sure not to call any functions here that could clobber these
- * registers.
- */
-
-int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
-int nr_dcplb_supv_miss[NR_CPUS], nr_icplb_supv_miss[NR_CPUS];
-int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS];
-
-#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
-#define MGR_ATTR __attribute__((l1_text))
-#else
-#define MGR_ATTR
-#endif
-
-static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
-				    unsigned long addr)
-{
-	_disable_dcplb();
-	bfin_write32(DCPLB_DATA0 + idx * 4, data);
-	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	_enable_dcplb();
-
-#ifdef CONFIG_CPLB_INFO
-	dcplb_tbl[cpu][idx].addr = addr;
-	dcplb_tbl[cpu][idx].data = data;
-#endif
-}
-
-static inline void write_icplb_data(int cpu, int idx, unsigned long data,
-				    unsigned long addr)
-{
-	_disable_icplb();
-	bfin_write32(ICPLB_DATA0 + idx * 4, data);
-	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	_enable_icplb();
-
-#ifdef CONFIG_CPLB_INFO
-	icplb_tbl[cpu][idx].addr = addr;
-	icplb_tbl[cpu][idx].data = data;
-#endif
-}
-
-/* Counters to implement round-robin replacement.  */
-static int icplb_rr_index[NR_CPUS] PDT_ATTR;
-static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
-
-/*
- * Find an ICPLB entry to be evicted and return its index.
- */
-static int evict_one_icplb(int cpu)
-{
-	int i = first_switched_icplb + icplb_rr_index[cpu];
-	if (i >= MAX_CPLBS) {
-		i -= MAX_CPLBS - first_switched_icplb;
-		icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb;
-	}
-	icplb_rr_index[cpu]++;
-	return i;
-}
-
-static int evict_one_dcplb(int cpu)
-{
-	int i = first_switched_dcplb + dcplb_rr_index[cpu];
-	if (i >= MAX_CPLBS) {
-		i -= MAX_CPLBS - first_switched_dcplb;
-		dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb;
-	}
-	dcplb_rr_index[cpu]++;
-	return i;
-}
-
-MGR_ATTR static int icplb_miss(int cpu)
-{
-	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
-	int status = bfin_read_ICPLB_STATUS();
-	int idx;
-	unsigned long i_data, base, addr1, eaddr;
-
-	nr_icplb_miss[cpu]++;
-	if (unlikely(status & FAULT_USERSUPV))
-		nr_icplb_supv_miss[cpu]++;
-
-	base = 0;
-	idx = 0;
-	do {
-		eaddr = icplb_bounds[idx].eaddr;
-		if (addr < eaddr)
-			break;
-		base = eaddr;
-	} while (++idx < icplb_nr_bounds);
-
-	if (unlikely(idx == icplb_nr_bounds))
-		return CPLB_NO_ADDR_MATCH;
-
-	i_data = icplb_bounds[idx].data;
-	if (unlikely(i_data == 0))
-		return CPLB_NO_ADDR_MATCH;
-
-	addr1 = addr & ~(SIZE_4M - 1);
-	addr &= ~(SIZE_1M - 1);
-	i_data |= PAGE_SIZE_1MB;
-	if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) {
-		/*
-		 * This works because
-		 * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB.
-		 */
-		i_data |= PAGE_SIZE_4MB;
-		addr = addr1;
-	}
-
-	/* Pick entry to evict */
-	idx = evict_one_icplb(cpu);
-
-	write_icplb_data(cpu, idx, i_data, addr);
-
-	return CPLB_RELOADED;
-}
-
-MGR_ATTR static int dcplb_miss(int cpu)
-{
-	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
-	int status = bfin_read_DCPLB_STATUS();
-	int idx;
-	unsigned long d_data, base, addr1, eaddr, cplb_pagesize, cplb_pageflags;
-
-	nr_dcplb_miss[cpu]++;
-	if (unlikely(status & FAULT_USERSUPV))
-		nr_dcplb_supv_miss[cpu]++;
-
-	base = 0;
-	idx = 0;
-	do {
-		eaddr = dcplb_bounds[idx].eaddr;
-		if (addr < eaddr)
-			break;
-		base = eaddr;
-	} while (++idx < dcplb_nr_bounds);
-
-	if (unlikely(idx == dcplb_nr_bounds))
-		return CPLB_NO_ADDR_MATCH;
-
-	d_data = dcplb_bounds[idx].data;
-	if (unlikely(d_data == 0))
-		return CPLB_NO_ADDR_MATCH;
-
-	addr &= ~(SIZE_1M - 1);
-	d_data |= PAGE_SIZE_1MB;
-
-	/* BF60x support large than 4M CPLB page size */
-#ifdef PAGE_SIZE_16MB
-	cplb_pageflags = PAGE_SIZE_16MB;
-	cplb_pagesize = SIZE_16M;
-#else
-	cplb_pageflags = PAGE_SIZE_4MB;
-	cplb_pagesize = SIZE_4M;
-#endif
-
-find_pagesize:
-	addr1 = addr & ~(cplb_pagesize - 1);
-	if (addr1 >= base && (addr1 + cplb_pagesize) <= eaddr) {
-		/*
-		 * This works because
-		 * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB.
-		 */
-		d_data |= cplb_pageflags;
-		addr = addr1;
-		goto found_pagesize;
-	} else {
-		if (cplb_pagesize > SIZE_4M) {
-			cplb_pageflags = PAGE_SIZE_4MB;
-			cplb_pagesize = SIZE_4M;
-			goto find_pagesize;
-		}
-	}
-
-found_pagesize:
-#ifdef CONFIG_BF60x
-	if ((addr >= ASYNC_BANK0_BASE)
-		&& (addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
-		d_data |= PAGE_SIZE_64MB;
-#endif
-
-	/* Pick entry to evict */
-	idx = evict_one_dcplb(cpu);
-
-	write_dcplb_data(cpu, idx, d_data, addr);
-
-	return CPLB_RELOADED;
-}
-
-MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
-{
-	int cause = seqstat & 0x3f;
-	unsigned int cpu = raw_smp_processor_id();
-	switch (cause) {
-	case VEC_CPLB_I_M:
-		return icplb_miss(cpu);
-	case VEC_CPLB_M:
-		return dcplb_miss(cpu);
-	default:
-		return CPLB_UNKNOWN_ERR;
-	}
-}
diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c
deleted file mode 100644
index 5b80d59e66e5..000000000000
--- a/arch/blackfin/kernel/cplbinfo.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/blackfin/kernel/cplbinfo.c - display CPLB status
- *
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/ctype.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-
-#include <asm/cplbinit.h>
-#include <asm/blackfin.h>
-
-static char const page_strtbl[][4] = {
-	"1K", "4K", "1M", "4M",
-#ifdef CONFIG_BF60x
-	"16K", "64K", "16M", "64M",
-#endif
-};
-#define page(flags)    (((flags) & 0x70000) >> 16)
-#define strpage(flags) page_strtbl[page(flags)]
-
-struct cplbinfo_data {
-	loff_t pos;
-	char cplb_type;
-	u32 mem_control;
-	struct cplb_entry *tbl;
-	int switched;
-};
-
-static void cplbinfo_print_header(struct seq_file *m)
-{
-	seq_printf(m, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n");
-}
-
-static int cplbinfo_nomore(struct cplbinfo_data *cdata)
-{
-	return cdata->pos >= MAX_CPLBS;
-}
-
-static int cplbinfo_show(struct seq_file *m, void *p)
-{
-	struct cplbinfo_data *cdata;
-	unsigned long data, addr;
-	loff_t pos;
-
-	cdata = p;
-	pos = cdata->pos;
-	addr = cdata->tbl[pos].addr;
-	data = cdata->tbl[pos].data;
-
-	seq_printf(m,
-		"%d\t0x%08lx\t%05lx\t%s\t%c\t%c\t%c\t%c\n",
-		(int)pos, addr, data, strpage(data),
-		(data & CPLB_USER_RD) ? 'Y' : 'N',
-		(data & CPLB_USER_WR) ? 'Y' : 'N',
-		(data & CPLB_SUPV_WR) ? 'Y' : 'N',
-		pos < cdata->switched ? 'N' : 'Y');
-
-	return 0;
-}
-
-static void cplbinfo_seq_init(struct cplbinfo_data *cdata, unsigned int cpu)
-{
-	if (cdata->cplb_type == 'I') {
-		cdata->mem_control = bfin_read_IMEM_CONTROL();
-		cdata->tbl = icplb_tbl[cpu];
-		cdata->switched = first_switched_icplb;
-	} else {
-		cdata->mem_control = bfin_read_DMEM_CONTROL();
-		cdata->tbl = dcplb_tbl[cpu];
-		cdata->switched = first_switched_dcplb;
-	}
-}
-
-static void *cplbinfo_start(struct seq_file *m, loff_t *pos)
-{
-	struct cplbinfo_data *cdata = m->private;
-
-	if (!*pos) {
-		seq_printf(m, "%cCPLBs are %sabled: 0x%x\n", cdata->cplb_type,
-			(cdata->mem_control & ENDCPLB ? "en" : "dis"),
-			cdata->mem_control);
-		cplbinfo_print_header(m);
-	} else if (cplbinfo_nomore(cdata))
-		return NULL;
-
-	get_cpu();
-	return cdata;
-}
-
-static void *cplbinfo_next(struct seq_file *m, void *p, loff_t *pos)
-{
-	struct cplbinfo_data *cdata = p;
-	cdata->pos = ++(*pos);
-	if (cplbinfo_nomore(cdata))
-		return NULL;
-	else
-		return cdata;
-}
-
-static void cplbinfo_stop(struct seq_file *m, void *p)
-{
-	put_cpu();
-}
-
-static const struct seq_operations cplbinfo_sops = {
-	.start = cplbinfo_start,
-	.next  = cplbinfo_next,
-	.stop  = cplbinfo_stop,
-	.show  = cplbinfo_show,
-};
-
-#define CPLBINFO_DCPLB_FLAG 0x80000000
-
-static int cplbinfo_open(struct inode *inode, struct file *file)
-{
-	char cplb_type;
-	unsigned int cpu = (unsigned long)PDE_DATA(file_inode(file));
-	int ret;
-	struct seq_file *m;
-	struct cplbinfo_data *cdata;
-
-	cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I';
-	cpu &= ~CPLBINFO_DCPLB_FLAG;
-
-	if (!cpu_online(cpu))
-		return -ENODEV;
-
-	ret = seq_open_private(file, &cplbinfo_sops, sizeof(*cdata));
-	if (ret)
-		return ret;
-	m = file->private_data;
-	cdata = m->private;
-
-	cdata->pos = 0;
-	cdata->cplb_type = cplb_type;
-	cplbinfo_seq_init(cdata, cpu);
-
-	return 0;
-}
-
-static const struct file_operations cplbinfo_fops = {
-	.open    = cplbinfo_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release_private,
-};
-
-static int __init cplbinfo_init(void)
-{
-	struct proc_dir_entry *cplb_dir, *cpu_dir;
-	char buf[10];
-	unsigned int cpu;
-
-	cplb_dir = proc_mkdir("cplbinfo", NULL);
-	if (!cplb_dir)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		sprintf(buf, "cpu%i", cpu);
-		cpu_dir = proc_mkdir(buf, cplb_dir);
-		if (!cpu_dir)
-			return -ENOMEM;
-
-		proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
-			(void *)cpu);
-		proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
-			(void *)(cpu | CPLBINFO_DCPLB_FLAG));
-	}
-
-	return 0;
-}
-late_initcall(cplbinfo_init);
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
deleted file mode 100644
index 194773ce109e..000000000000
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ /dev/null
@@ -1,1891 +0,0 @@
-/*
- * debugfs interface to core/system MMRs
- *
- * Copyright 2007-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/blackfin.h>
-#include <asm/gptimers.h>
-#include <asm/bfin_can.h>
-#include <asm/bfin_dma.h>
-#include <asm/bfin_ppi.h>
-#include <asm/bfin_serial.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/bfin_twi.h>
-#include <asm/gpio.h>
-
-/* Common code defines PORT_MUX on us, so redirect the MMR back locally */
-#ifdef BFIN_PORT_MUX
-#undef PORT_MUX
-#define PORT_MUX BFIN_PORT_MUX
-#endif
-
-#define _d(name, bits, addr, perms) debugfs_create_x##bits(name, perms, parent, (u##bits *)(addr))
-#define d(name, bits, addr)         _d(name, bits, addr, S_IRUSR|S_IWUSR)
-#define d_RO(name, bits, addr)      _d(name, bits, addr, S_IRUSR)
-#define d_WO(name, bits, addr)      _d(name, bits, addr, S_IWUSR)
-
-#define D_RO(name, bits) d_RO(#name, bits, name)
-#define D_WO(name, bits) d_WO(#name, bits, name)
-#define D32(name)        d(#name, 32, name)
-#define D16(name)        d(#name, 16, name)
-
-#define REGS_OFF(peri, mmr) offsetof(struct bfin_##peri##_regs, mmr)
-#define __REGS(peri, sname, rname) \
-	do { \
-		struct bfin_##peri##_regs r; \
-		void *addr = (void *)(base + REGS_OFF(peri, rname)); \
-		strcpy(_buf, sname); \
-		if (sizeof(r.rname) == 2) \
-			debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, addr); \
-		else \
-			debugfs_create_x32(buf, S_IRUSR|S_IWUSR, parent, addr); \
-	} while (0)
-#define REGS_STR_PFX(buf, pfx, num) \
-	({ \
-		buf + (num >= 0 ? \
-			sprintf(buf, #pfx "%i_", num) : \
-			sprintf(buf, #pfx "_")); \
-	})
-#define REGS_STR_PFX_C(buf, pfx, num) \
-	({ \
-		buf + (num >= 0 ? \
-			sprintf(buf, #pfx "%c_", 'A' + num) : \
-			sprintf(buf, #pfx "_")); \
-	})
-
-/*
- * Core registers (not memory mapped)
- */
-extern u32 last_seqstat;
-
-static int debug_cclk_get(void *data, u64 *val)
-{
-	*val = get_cclk();
-	return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_debug_cclk, debug_cclk_get, NULL, "0x%08llx\n");
-
-static int debug_sclk_get(void *data, u64 *val)
-{
-	*val = get_sclk();
-	return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_debug_sclk, debug_sclk_get, NULL, "0x%08llx\n");
-
-#define DEFINE_SYSREG(sr, pre, post) \
-static int sysreg_##sr##_get(void *data, u64 *val) \
-{ \
-	unsigned long tmp; \
-	pre; \
-	__asm__ __volatile__("%0 = " #sr ";" : "=d"(tmp)); \
-	*val = tmp; \
-	return 0; \
-} \
-static int sysreg_##sr##_set(void *data, u64 val) \
-{ \
-	unsigned long tmp = val; \
-	__asm__ __volatile__(#sr " = %0;" : : "d"(tmp)); \
-	post; \
-	return 0; \
-} \
-DEFINE_SIMPLE_ATTRIBUTE(fops_sysreg_##sr, sysreg_##sr##_get, sysreg_##sr##_set, "0x%08llx\n")
-
-DEFINE_SYSREG(cycles, , );
-DEFINE_SYSREG(cycles2, __asm__ __volatile__("%0 = cycles;" : "=d"(tmp)), );
-DEFINE_SYSREG(emudat, , );
-DEFINE_SYSREG(seqstat, , );
-DEFINE_SYSREG(syscfg, , CSYNC());
-#define D_SYSREG(sr) debugfs_create_file(#sr, S_IRUSR|S_IWUSR, parent, NULL, &fops_sysreg_##sr)
-
-#ifndef CONFIG_BF60x
-/*
- * CAN
- */
-#define CAN_OFF(mmr)  REGS_OFF(can, mmr)
-#define __CAN(uname, lname) __REGS(can, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_can(struct dentry *parent, unsigned long base, int num)
-{
-	static struct dentry *am, *mb;
-	int i, j;
-	char buf[32], *_buf = REGS_STR_PFX(buf, CAN, num);
-
-	if (!am) {
-		am = debugfs_create_dir("am", parent);
-		mb = debugfs_create_dir("mb", parent);
-	}
-
-	__CAN(MC1, mc1);
-	__CAN(MD1, md1);
-	__CAN(TRS1, trs1);
-	__CAN(TRR1, trr1);
-	__CAN(TA1, ta1);
-	__CAN(AA1, aa1);
-	__CAN(RMP1, rmp1);
-	__CAN(RML1, rml1);
-	__CAN(MBTIF1, mbtif1);
-	__CAN(MBRIF1, mbrif1);
-	__CAN(MBIM1, mbim1);
-	__CAN(RFH1, rfh1);
-	__CAN(OPSS1, opss1);
-
-	__CAN(MC2, mc2);
-	__CAN(MD2, md2);
-	__CAN(TRS2, trs2);
-	__CAN(TRR2, trr2);
-	__CAN(TA2, ta2);
-	__CAN(AA2, aa2);
-	__CAN(RMP2, rmp2);
-	__CAN(RML2, rml2);
-	__CAN(MBTIF2, mbtif2);
-	__CAN(MBRIF2, mbrif2);
-	__CAN(MBIM2, mbim2);
-	__CAN(RFH2, rfh2);
-	__CAN(OPSS2, opss2);
-
-	__CAN(CLOCK, clock);
-	__CAN(TIMING, timing);
-	__CAN(DEBUG, debug);
-	__CAN(STATUS, status);
-	__CAN(CEC, cec);
-	__CAN(GIS, gis);
-	__CAN(GIM, gim);
-	__CAN(GIF, gif);
-	__CAN(CONTROL, control);
-	__CAN(INTR, intr);
-	__CAN(VERSION, version);
-	__CAN(MBTD, mbtd);
-	__CAN(EWR, ewr);
-	__CAN(ESR, esr);
-	/*__CAN(UCREG, ucreg); no longer exists */
-	__CAN(UCCNT, uccnt);
-	__CAN(UCRC, ucrc);
-	__CAN(UCCNF, uccnf);
-	__CAN(VERSION2, version2);
-
-	for (i = 0; i < 32; ++i) {
-		sprintf(_buf, "AM%02iL", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am,
-			(u16 *)(base + CAN_OFF(msk[i].aml)));
-		sprintf(_buf, "AM%02iH", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am,
-			(u16 *)(base + CAN_OFF(msk[i].amh)));
-
-		for (j = 0; j < 3; ++j) {
-			sprintf(_buf, "MB%02i_DATA%i", i, j);
-			debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
-				(u16 *)(base + CAN_OFF(chl[i].data[j*2])));
-		}
-		sprintf(_buf, "MB%02i_LENGTH", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
-			(u16 *)(base + CAN_OFF(chl[i].dlc)));
-		sprintf(_buf, "MB%02i_TIMESTAMP", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
-			(u16 *)(base + CAN_OFF(chl[i].tsv)));
-		sprintf(_buf, "MB%02i_ID0", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
-			(u16 *)(base + CAN_OFF(chl[i].id0)));
-		sprintf(_buf, "MB%02i_ID1", i);
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb,
-			(u16 *)(base + CAN_OFF(chl[i].id1)));
-	}
-}
-#define CAN(num) bfin_debug_mmrs_can(parent, CAN##num##_MC1, num)
-
-/*
- * DMA
- */
-#define __DMA(uname, lname) __REGS(dma, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdma, const char *pfx)
-{
-	char buf[32], *_buf;
-
-	if (mdma)
-		_buf = buf + sprintf(buf, "%s_%c%i_", pfx, mdma, num);
-	else
-		_buf = buf + sprintf(buf, "%s%i_", pfx, num);
-
-	__DMA(NEXT_DESC_PTR, next_desc_ptr);
-	__DMA(START_ADDR, start_addr);
-	__DMA(CONFIG, config);
-	__DMA(X_COUNT, x_count);
-	__DMA(X_MODIFY, x_modify);
-	__DMA(Y_COUNT, y_count);
-	__DMA(Y_MODIFY, y_modify);
-	__DMA(CURR_DESC_PTR, curr_desc_ptr);
-	__DMA(CURR_ADDR, curr_addr);
-	__DMA(IRQ_STATUS, irq_status);
-#ifndef CONFIG_BF60x
-	if (strcmp(pfx, "IMDMA") != 0)
-		__DMA(PERIPHERAL_MAP, peripheral_map);
-#endif
-	__DMA(CURR_X_COUNT, curr_x_count);
-	__DMA(CURR_Y_COUNT, curr_y_count);
-}
-#define _DMA(num, base, mdma, pfx) bfin_debug_mmrs_dma(parent, base, num, mdma, pfx "DMA")
-#define DMA(num)  _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "")
-#define _MDMA(num, x) \
-	do { \
-		_DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \
-		_DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \
-	} while (0)
-#define MDMA(num) _MDMA(num, M)
-#define IMDMA(num) _MDMA(num, IM)
-
-/*
- * EPPI
- */
-#define __EPPI(uname, lname) __REGS(eppi, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, EPPI, num);
-	__EPPI(STATUS, status);
-	__EPPI(HCOUNT, hcount);
-	__EPPI(HDELAY, hdelay);
-	__EPPI(VCOUNT, vcount);
-	__EPPI(VDELAY, vdelay);
-	__EPPI(FRAME, frame);
-	__EPPI(LINE, line);
-	__EPPI(CLKDIV, clkdiv);
-	__EPPI(CONTROL, control);
-	__EPPI(FS1W_HBL, fs1w_hbl);
-	__EPPI(FS1P_AVPL, fs1p_avpl);
-	__EPPI(FS2W_LVB, fs2w_lvb);
-	__EPPI(FS2P_LAVF, fs2p_lavf);
-	__EPPI(CLIP, clip);
-}
-#define EPPI(num) bfin_debug_mmrs_eppi(parent, EPPI##num##_STATUS, num)
-
-/*
- * General Purpose Timers
- */
-#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num);
-	__GPTIMER(CONFIG, config);
-	__GPTIMER(COUNTER, counter);
-	__GPTIMER(PERIOD, period);
-	__GPTIMER(WIDTH, width);
-}
-#define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num)
-
-#define GPTIMER_GROUP_OFF(mmr) REGS_OFF(gptimer_group, mmr)
-#define __GPTIMER_GROUP(uname, lname) __REGS(gptimer_group, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_gptimer_group(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf;
-
-	if (num == -1) {
-		_buf = buf + sprintf(buf, "TIMER_");
-		__GPTIMER_GROUP(ENABLE, enable);
-		__GPTIMER_GROUP(DISABLE, disable);
-		__GPTIMER_GROUP(STATUS, status);
-	} else {
-		/* These MMRs are a bit odd as the group # is a suffix */
-		_buf = buf + sprintf(buf, "TIMER_ENABLE%i", num);
-		d(buf, 16, base + GPTIMER_GROUP_OFF(enable));
-
-		_buf = buf + sprintf(buf, "TIMER_DISABLE%i", num);
-		d(buf, 16, base + GPTIMER_GROUP_OFF(disable));
-
-		_buf = buf + sprintf(buf, "TIMER_STATUS%i", num);
-		d(buf, 32, base + GPTIMER_GROUP_OFF(status));
-	}
-}
-#define GPTIMER_GROUP(mmr, num) bfin_debug_mmrs_gptimer_group(parent, mmr, num)
-
-/*
- * Handshake MDMA
- */
-#define __HMDMA(uname, lname) __REGS(hmdma, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_hmdma(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, HMDMA, num);
-	__HMDMA(CONTROL, control);
-	__HMDMA(ECINIT, ecinit);
-	__HMDMA(BCINIT, bcinit);
-	__HMDMA(ECURGENT, ecurgent);
-	__HMDMA(ECOVERFLOW, ecoverflow);
-	__HMDMA(ECOUNT, ecount);
-	__HMDMA(BCOUNT, bcount);
-}
-#define HMDMA(num) bfin_debug_mmrs_hmdma(parent, HMDMA##num##_CONTROL, num)
-
-/*
- * Peripheral Interrupts (PINT/GPIO)
- */
-#ifdef PINT0_MASK_SET
-#define __PINT(uname, lname) __REGS(pint, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_pint(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, PINT, num);
-	__PINT(MASK_SET, mask_set);
-	__PINT(MASK_CLEAR, mask_clear);
-	__PINT(REQUEST, request);
-	__PINT(ASSIGN, assign);
-	__PINT(EDGE_SET, edge_set);
-	__PINT(EDGE_CLEAR, edge_clear);
-	__PINT(INVERT_SET, invert_set);
-	__PINT(INVERT_CLEAR, invert_clear);
-	__PINT(PINSTATE, pinstate);
-	__PINT(LATCH, latch);
-}
-#define PINT(num) bfin_debug_mmrs_pint(parent, PINT##num##_MASK_SET, num)
-#endif
-
-/*
- * Port/GPIO
- */
-#define bfin_gpio_regs gpio_port_t
-#define __PORT(uname, lname) __REGS(gpio, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_port(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf;
-#ifdef __ADSPBF54x__
-	_buf = REGS_STR_PFX_C(buf, PORT, num);
-	__PORT(FER, port_fer);
-	__PORT(SET, data_set);
-	__PORT(CLEAR, data_clear);
-	__PORT(DIR_SET, dir_set);
-	__PORT(DIR_CLEAR, dir_clear);
-	__PORT(INEN, inen);
-	__PORT(MUX, port_mux);
-#else
-	_buf = buf + sprintf(buf, "PORT%cIO_", num);
-	__PORT(CLEAR, data_clear);
-	__PORT(SET, data_set);
-	__PORT(TOGGLE, toggle);
-	__PORT(MASKA, maska);
-	__PORT(MASKA_CLEAR, maska_clear);
-	__PORT(MASKA_SET, maska_set);
-	__PORT(MASKA_TOGGLE, maska_toggle);
-	__PORT(MASKB, maskb);
-	__PORT(MASKB_CLEAR, maskb_clear);
-	__PORT(MASKB_SET, maskb_set);
-	__PORT(MASKB_TOGGLE, maskb_toggle);
-	__PORT(DIR, dir);
-	__PORT(POLAR, polar);
-	__PORT(EDGE, edge);
-	__PORT(BOTH, both);
-	__PORT(INEN, inen);
-#endif
-	_buf[-1] = '\0';
-	d(buf, 16, base + REGS_OFF(gpio, data));
-}
-#define PORT(base, num) bfin_debug_mmrs_port(parent, base, num)
-
-/*
- * PPI
- */
-#define __PPI(uname, lname) __REGS(ppi, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, PPI, num);
-	__PPI(CONTROL, control);
-	__PPI(STATUS, status);
-	__PPI(COUNT, count);
-	__PPI(DELAY, delay);
-	__PPI(FRAME, frame);
-}
-#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num)
-
-/*
- * SPI
- */
-#define __SPI(uname, lname) __REGS(spi, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_spi(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, SPI, num);
-	__SPI(CTL, ctl);
-	__SPI(FLG, flg);
-	__SPI(STAT, stat);
-	__SPI(TDBR, tdbr);
-	__SPI(RDBR, rdbr);
-	__SPI(BAUD, baud);
-	__SPI(SHADOW, shadow);
-}
-#define SPI(num) bfin_debug_mmrs_spi(parent, SPI##num##_REGBASE, num)
-
-/*
- * SPORT
- */
-static inline int sport_width(void *mmr)
-{
-	unsigned long lmmr = (unsigned long)mmr;
-	if ((lmmr & 0xff) == 0x10)
-		/* SPORT#_TX has 0x10 offset -> SPORT#_TCR2 has 0x04 offset */
-		lmmr -= 0xc;
-	else
-		/* SPORT#_RX has 0x18 offset -> SPORT#_RCR2 has 0x24 offset */
-		lmmr += 0xc;
-	/* extract SLEN field from control register 2 and add 1 */
-	return (bfin_read16(lmmr) & 0x1f) + 1;
-}
-static int sport_set(void *mmr, u64 val)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	if (sport_width(mmr) <= 16)
-		bfin_write16(mmr, val);
-	else
-		bfin_write32(mmr, val);
-	local_irq_restore(flags);
-	return 0;
-}
-static int sport_get(void *mmr, u64 *val)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	if (sport_width(mmr) <= 16)
-		*val = bfin_read16(mmr);
-	else
-		*val = bfin_read32(mmr);
-	local_irq_restore(flags);
-	return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_sport, sport_get, sport_set, "0x%08llx\n");
-/*DEFINE_SIMPLE_ATTRIBUTE(fops_sport_ro, sport_get, NULL, "0x%08llx\n");*/
-DEFINE_SIMPLE_ATTRIBUTE(fops_sport_wo, NULL, sport_set, "0x%08llx\n");
-#define SPORT_OFF(mmr) (SPORT0_##mmr - SPORT0_TCR1)
-#define _D_SPORT(name, perms, fops) \
-	do { \
-		strcpy(_buf, #name); \
-		debugfs_create_file(buf, perms, parent, (void *)(base + SPORT_OFF(name)), fops); \
-	} while (0)
-#define __SPORT_RW(name) _D_SPORT(name, S_IRUSR|S_IWUSR, &fops_sport)
-#define __SPORT_RO(name) _D_SPORT(name, S_IRUSR, &fops_sport_ro)
-#define __SPORT_WO(name) _D_SPORT(name, S_IWUSR, &fops_sport_wo)
-#define __SPORT(name, bits) \
-	do { \
-		strcpy(_buf, #name); \
-		debugfs_create_x##bits(buf, S_IRUSR|S_IWUSR, parent, (u##bits *)(base + SPORT_OFF(name))); \
-	} while (0)
-static void __init __maybe_unused
-bfin_debug_mmrs_sport(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, SPORT, num);
-	__SPORT(CHNL, 16);
-	__SPORT(MCMC1, 16);
-	__SPORT(MCMC2, 16);
-	__SPORT(MRCS0, 32);
-	__SPORT(MRCS1, 32);
-	__SPORT(MRCS2, 32);
-	__SPORT(MRCS3, 32);
-	__SPORT(MTCS0, 32);
-	__SPORT(MTCS1, 32);
-	__SPORT(MTCS2, 32);
-	__SPORT(MTCS3, 32);
-	__SPORT(RCLKDIV, 16);
-	__SPORT(RCR1, 16);
-	__SPORT(RCR2, 16);
-	__SPORT(RFSDIV, 16);
-	__SPORT_RW(RX);
-	__SPORT(STAT, 16);
-	__SPORT(TCLKDIV, 16);
-	__SPORT(TCR1, 16);
-	__SPORT(TCR2, 16);
-	__SPORT(TFSDIV, 16);
-	__SPORT_WO(TX);
-}
-#define SPORT(num) bfin_debug_mmrs_sport(parent, SPORT##num##_TCR1, num)
-
-/*
- * TWI
- */
-#define __TWI(uname, lname) __REGS(twi, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_twi(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, TWI, num);
-	__TWI(CLKDIV, clkdiv);
-	__TWI(CONTROL, control);
-	__TWI(SLAVE_CTL, slave_ctl);
-	__TWI(SLAVE_STAT, slave_stat);
-	__TWI(SLAVE_ADDR, slave_addr);
-	__TWI(MASTER_CTL, master_ctl);
-	__TWI(MASTER_STAT, master_stat);
-	__TWI(MASTER_ADDR, master_addr);
-	__TWI(INT_STAT, int_stat);
-	__TWI(INT_MASK, int_mask);
-	__TWI(FIFO_CTL, fifo_ctl);
-	__TWI(FIFO_STAT, fifo_stat);
-	__TWI(XMT_DATA8, xmt_data8);
-	__TWI(XMT_DATA16, xmt_data16);
-	__TWI(RCV_DATA8, rcv_data8);
-	__TWI(RCV_DATA16, rcv_data16);
-}
-#define TWI(num) bfin_debug_mmrs_twi(parent, TWI##num##_CLKDIV, num)
-
-/*
- * UART
- */
-#define __UART(uname, lname) __REGS(uart, #uname, lname)
-static void __init __maybe_unused
-bfin_debug_mmrs_uart(struct dentry *parent, unsigned long base, int num)
-{
-	char buf[32], *_buf = REGS_STR_PFX(buf, UART, num);
-#ifdef BFIN_UART_BF54X_STYLE
-	__UART(DLL, dll);
-	__UART(DLH, dlh);
-	__UART(GCTL, gctl);
-	__UART(LCR, lcr);
-	__UART(MCR, mcr);
-	__UART(LSR, lsr);
-	__UART(MSR, msr);
-	__UART(SCR, scr);
-	__UART(IER_SET, ier_set);
-	__UART(IER_CLEAR, ier_clear);
-	__UART(THR, thr);
-	__UART(RBR, rbr);
-#else
-	__UART(DLL, dll);
-	__UART(THR, thr);
-	__UART(RBR, rbr);
-	__UART(DLH, dlh);
-	__UART(IER, ier);
-	__UART(IIR, iir);
-	__UART(LCR, lcr);
-	__UART(MCR, mcr);
-	__UART(LSR, lsr);
-	__UART(MSR, msr);
-	__UART(SCR, scr);
-	__UART(GCTL, gctl);
-#endif
-}
-#define UART(num) bfin_debug_mmrs_uart(parent, UART##num##_DLL, num)
-#endif /* CONFIG_BF60x */
-/*
- * The actual debugfs generation
- */
-static struct dentry *debug_mmrs_dentry;
-
-static int __init bfin_debug_mmrs_init(void)
-{
-	struct dentry *top, *parent;
-
-	pr_info("debug-mmrs: setting up Blackfin MMR debugfs\n");
-
-	top = debugfs_create_dir("blackfin", NULL);
-	if (top == NULL)
-		return -1;
-
-	parent = debugfs_create_dir("core_regs", top);
-	debugfs_create_file("cclk", S_IRUSR, parent, NULL, &fops_debug_cclk);
-	debugfs_create_file("sclk", S_IRUSR, parent, NULL, &fops_debug_sclk);
-	debugfs_create_x32("last_seqstat", S_IRUSR, parent, &last_seqstat);
-	D_SYSREG(cycles);
-	D_SYSREG(cycles2);
-	D_SYSREG(emudat);
-	D_SYSREG(seqstat);
-	D_SYSREG(syscfg);
-
-	/* Core MMRs */
-	parent = debugfs_create_dir("ctimer", top);
-	D32(TCNTL);
-	D32(TCOUNT);
-	D32(TPERIOD);
-	D32(TSCALE);
-
-	parent = debugfs_create_dir("cec", top);
-	D32(EVT0);
-	D32(EVT1);
-	D32(EVT2);
-	D32(EVT3);
-	D32(EVT4);
-	D32(EVT5);
-	D32(EVT6);
-	D32(EVT7);
-	D32(EVT8);
-	D32(EVT9);
-	D32(EVT10);
-	D32(EVT11);
-	D32(EVT12);
-	D32(EVT13);
-	D32(EVT14);
-	D32(EVT15);
-	D32(EVT_OVERRIDE);
-	D32(IMASK);
-	D32(IPEND);
-	D32(ILAT);
-	D32(IPRIO);
-
-	parent = debugfs_create_dir("debug", top);
-	D32(DBGSTAT);
-	D32(DSPID);
-
-	parent = debugfs_create_dir("mmu", top);
-	D32(SRAM_BASE_ADDRESS);
-	D32(DCPLB_ADDR0);
-	D32(DCPLB_ADDR10);
-	D32(DCPLB_ADDR11);
-	D32(DCPLB_ADDR12);
-	D32(DCPLB_ADDR13);
-	D32(DCPLB_ADDR14);
-	D32(DCPLB_ADDR15);
-	D32(DCPLB_ADDR1);
-	D32(DCPLB_ADDR2);
-	D32(DCPLB_ADDR3);
-	D32(DCPLB_ADDR4);
-	D32(DCPLB_ADDR5);
-	D32(DCPLB_ADDR6);
-	D32(DCPLB_ADDR7);
-	D32(DCPLB_ADDR8);
-	D32(DCPLB_ADDR9);
-	D32(DCPLB_DATA0);
-	D32(DCPLB_DATA10);
-	D32(DCPLB_DATA11);
-	D32(DCPLB_DATA12);
-	D32(DCPLB_DATA13);
-	D32(DCPLB_DATA14);
-	D32(DCPLB_DATA15);
-	D32(DCPLB_DATA1);
-	D32(DCPLB_DATA2);
-	D32(DCPLB_DATA3);
-	D32(DCPLB_DATA4);
-	D32(DCPLB_DATA5);
-	D32(DCPLB_DATA6);
-	D32(DCPLB_DATA7);
-	D32(DCPLB_DATA8);
-	D32(DCPLB_DATA9);
-	D32(DCPLB_FAULT_ADDR);
-	D32(DCPLB_STATUS);
-	D32(DMEM_CONTROL);
-	D32(DTEST_COMMAND);
-	D32(DTEST_DATA0);
-	D32(DTEST_DATA1);
-
-	D32(ICPLB_ADDR0);
-	D32(ICPLB_ADDR1);
-	D32(ICPLB_ADDR2);
-	D32(ICPLB_ADDR3);
-	D32(ICPLB_ADDR4);
-	D32(ICPLB_ADDR5);
-	D32(ICPLB_ADDR6);
-	D32(ICPLB_ADDR7);
-	D32(ICPLB_ADDR8);
-	D32(ICPLB_ADDR9);
-	D32(ICPLB_ADDR10);
-	D32(ICPLB_ADDR11);
-	D32(ICPLB_ADDR12);
-	D32(ICPLB_ADDR13);
-	D32(ICPLB_ADDR14);
-	D32(ICPLB_ADDR15);
-	D32(ICPLB_DATA0);
-	D32(ICPLB_DATA1);
-	D32(ICPLB_DATA2);
-	D32(ICPLB_DATA3);
-	D32(ICPLB_DATA4);
-	D32(ICPLB_DATA5);
-	D32(ICPLB_DATA6);
-	D32(ICPLB_DATA7);
-	D32(ICPLB_DATA8);
-	D32(ICPLB_DATA9);
-	D32(ICPLB_DATA10);
-	D32(ICPLB_DATA11);
-	D32(ICPLB_DATA12);
-	D32(ICPLB_DATA13);
-	D32(ICPLB_DATA14);
-	D32(ICPLB_DATA15);
-	D32(ICPLB_FAULT_ADDR);
-	D32(ICPLB_STATUS);
-	D32(IMEM_CONTROL);
-	if (!ANOMALY_05000481) {
-		D32(ITEST_COMMAND);
-		D32(ITEST_DATA0);
-		D32(ITEST_DATA1);
-	}
-
-	parent = debugfs_create_dir("perf", top);
-	D32(PFCNTR0);
-	D32(PFCNTR1);
-	D32(PFCTL);
-
-	parent = debugfs_create_dir("trace", top);
-	D32(TBUF);
-	D32(TBUFCTL);
-	D32(TBUFSTAT);
-
-	parent = debugfs_create_dir("watchpoint", top);
-	D32(WPIACTL);
-	D32(WPIA0);
-	D32(WPIA1);
-	D32(WPIA2);
-	D32(WPIA3);
-	D32(WPIA4);
-	D32(WPIA5);
-	D32(WPIACNT0);
-	D32(WPIACNT1);
-	D32(WPIACNT2);
-	D32(WPIACNT3);
-	D32(WPIACNT4);
-	D32(WPIACNT5);
-	D32(WPDACTL);
-	D32(WPDA0);
-	D32(WPDA1);
-	D32(WPDACNT0);
-	D32(WPDACNT1);
-	D32(WPSTAT);
-#ifndef CONFIG_BF60x
-	/* System MMRs */
-#ifdef ATAPI_CONTROL
-	parent = debugfs_create_dir("atapi", top);
-	D16(ATAPI_CONTROL);
-	D16(ATAPI_DEV_ADDR);
-	D16(ATAPI_DEV_RXBUF);
-	D16(ATAPI_DEV_TXBUF);
-	D16(ATAPI_DMA_TFRCNT);
-	D16(ATAPI_INT_MASK);
-	D16(ATAPI_INT_STATUS);
-	D16(ATAPI_LINE_STATUS);
-	D16(ATAPI_MULTI_TIM_0);
-	D16(ATAPI_MULTI_TIM_1);
-	D16(ATAPI_MULTI_TIM_2);
-	D16(ATAPI_PIO_TFRCNT);
-	D16(ATAPI_PIO_TIM_0);
-	D16(ATAPI_PIO_TIM_1);
-	D16(ATAPI_REG_TIM_0);
-	D16(ATAPI_SM_STATE);
-	D16(ATAPI_STATUS);
-	D16(ATAPI_TERMINATE);
-	D16(ATAPI_UDMAOUT_TFRCNT);
-	D16(ATAPI_ULTRA_TIM_0);
-	D16(ATAPI_ULTRA_TIM_1);
-	D16(ATAPI_ULTRA_TIM_2);
-	D16(ATAPI_ULTRA_TIM_3);
-	D16(ATAPI_UMAIN_TFRCNT);
-	D16(ATAPI_XFER_LEN);
-#endif
-
-#if defined(CAN_MC1) || defined(CAN0_MC1) || defined(CAN1_MC1)
-	parent = debugfs_create_dir("can", top);
-# ifdef CAN_MC1
-	bfin_debug_mmrs_can(parent, CAN_MC1, -1);
-# endif
-# ifdef CAN0_MC1
-	CAN(0);
-# endif
-# ifdef CAN1_MC1
-	CAN(1);
-# endif
-#endif
-
-#ifdef CNT_COMMAND
-	parent = debugfs_create_dir("counter", top);
-	D16(CNT_COMMAND);
-	D16(CNT_CONFIG);
-	D32(CNT_COUNTER);
-	D16(CNT_DEBOUNCE);
-	D16(CNT_IMASK);
-	D32(CNT_MAX);
-	D32(CNT_MIN);
-	D16(CNT_STATUS);
-#endif
-
-	parent = debugfs_create_dir("dmac", top);
-#ifdef DMAC_TC_CNT
-	D16(DMAC_TC_CNT);
-	D16(DMAC_TC_PER);
-#endif
-#ifdef DMAC0_TC_CNT
-	D16(DMAC0_TC_CNT);
-	D16(DMAC0_TC_PER);
-#endif
-#ifdef DMAC1_TC_CNT
-	D16(DMAC1_TC_CNT);
-	D16(DMAC1_TC_PER);
-#endif
-#ifdef DMAC1_PERIMUX
-	D16(DMAC1_PERIMUX);
-#endif
-
-#ifdef __ADSPBF561__
-	/* XXX: should rewrite the MMR map */
-# define DMA0_NEXT_DESC_PTR DMA2_0_NEXT_DESC_PTR
-# define DMA1_NEXT_DESC_PTR DMA2_1_NEXT_DESC_PTR
-# define DMA2_NEXT_DESC_PTR DMA2_2_NEXT_DESC_PTR
-# define DMA3_NEXT_DESC_PTR DMA2_3_NEXT_DESC_PTR
-# define DMA4_NEXT_DESC_PTR DMA2_4_NEXT_DESC_PTR
-# define DMA5_NEXT_DESC_PTR DMA2_5_NEXT_DESC_PTR
-# define DMA6_NEXT_DESC_PTR DMA2_6_NEXT_DESC_PTR
-# define DMA7_NEXT_DESC_PTR DMA2_7_NEXT_DESC_PTR
-# define DMA8_NEXT_DESC_PTR DMA2_8_NEXT_DESC_PTR
-# define DMA9_NEXT_DESC_PTR DMA2_9_NEXT_DESC_PTR
-# define DMA10_NEXT_DESC_PTR DMA2_10_NEXT_DESC_PTR
-# define DMA11_NEXT_DESC_PTR DMA2_11_NEXT_DESC_PTR
-# define DMA12_NEXT_DESC_PTR DMA1_0_NEXT_DESC_PTR
-# define DMA13_NEXT_DESC_PTR DMA1_1_NEXT_DESC_PTR
-# define DMA14_NEXT_DESC_PTR DMA1_2_NEXT_DESC_PTR
-# define DMA15_NEXT_DESC_PTR DMA1_3_NEXT_DESC_PTR
-# define DMA16_NEXT_DESC_PTR DMA1_4_NEXT_DESC_PTR
-# define DMA17_NEXT_DESC_PTR DMA1_5_NEXT_DESC_PTR
-# define DMA18_NEXT_DESC_PTR DMA1_6_NEXT_DESC_PTR
-# define DMA19_NEXT_DESC_PTR DMA1_7_NEXT_DESC_PTR
-# define DMA20_NEXT_DESC_PTR DMA1_8_NEXT_DESC_PTR
-# define DMA21_NEXT_DESC_PTR DMA1_9_NEXT_DESC_PTR
-# define DMA22_NEXT_DESC_PTR DMA1_10_NEXT_DESC_PTR
-# define DMA23_NEXT_DESC_PTR DMA1_11_NEXT_DESC_PTR
-#endif
-	parent = debugfs_create_dir("dma", top);
-	DMA(0);
-	DMA(1);
-	DMA(1);
-	DMA(2);
-	DMA(3);
-	DMA(4);
-	DMA(5);
-	DMA(6);
-	DMA(7);
-#ifdef DMA8_NEXT_DESC_PTR
-	DMA(8);
-	DMA(9);
-	DMA(10);
-	DMA(11);
-#endif
-#ifdef DMA12_NEXT_DESC_PTR
-	DMA(12);
-	DMA(13);
-	DMA(14);
-	DMA(15);
-	DMA(16);
-	DMA(17);
-	DMA(18);
-	DMA(19);
-#endif
-#ifdef DMA20_NEXT_DESC_PTR
-	DMA(20);
-	DMA(21);
-	DMA(22);
-	DMA(23);
-#endif
-
-	parent = debugfs_create_dir("ebiu_amc", top);
-	D32(EBIU_AMBCTL0);
-	D32(EBIU_AMBCTL1);
-	D16(EBIU_AMGCTL);
-#ifdef EBIU_MBSCTL
-	D16(EBIU_MBSCTL);
-	D32(EBIU_ARBSTAT);
-	D32(EBIU_MODE);
-	D16(EBIU_FCTL);
-#endif
-
-#ifdef EBIU_SDGCTL
-	parent = debugfs_create_dir("ebiu_sdram", top);
-# ifdef __ADSPBF561__
-	D32(EBIU_SDBCTL);
-# else
-	D16(EBIU_SDBCTL);
-# endif
-	D32(EBIU_SDGCTL);
-	D16(EBIU_SDRRC);
-	D16(EBIU_SDSTAT);
-#endif
-
-#ifdef EBIU_DDRACCT
-	parent = debugfs_create_dir("ebiu_ddr", top);
-	D32(EBIU_DDRACCT);
-	D32(EBIU_DDRARCT);
-	D32(EBIU_DDRBRC0);
-	D32(EBIU_DDRBRC1);
-	D32(EBIU_DDRBRC2);
-	D32(EBIU_DDRBRC3);
-	D32(EBIU_DDRBRC4);
-	D32(EBIU_DDRBRC5);
-	D32(EBIU_DDRBRC6);
-	D32(EBIU_DDRBRC7);
-	D32(EBIU_DDRBWC0);
-	D32(EBIU_DDRBWC1);
-	D32(EBIU_DDRBWC2);
-	D32(EBIU_DDRBWC3);
-	D32(EBIU_DDRBWC4);
-	D32(EBIU_DDRBWC5);
-	D32(EBIU_DDRBWC6);
-	D32(EBIU_DDRBWC7);
-	D32(EBIU_DDRCTL0);
-	D32(EBIU_DDRCTL1);
-	D32(EBIU_DDRCTL2);
-	D32(EBIU_DDRCTL3);
-	D32(EBIU_DDRGC0);
-	D32(EBIU_DDRGC1);
-	D32(EBIU_DDRGC2);
-	D32(EBIU_DDRGC3);
-	D32(EBIU_DDRMCCL);
-	D32(EBIU_DDRMCEN);
-	D32(EBIU_DDRQUE);
-	D32(EBIU_DDRTACT);
-	D32(EBIU_ERRADD);
-	D16(EBIU_ERRMST);
-	D16(EBIU_RSTCTL);
-#endif
-
-#ifdef EMAC_ADDRHI
-	parent = debugfs_create_dir("emac", top);
-	D32(EMAC_ADDRHI);
-	D32(EMAC_ADDRLO);
-	D32(EMAC_FLC);
-	D32(EMAC_HASHHI);
-	D32(EMAC_HASHLO);
-	D32(EMAC_MMC_CTL);
-	D32(EMAC_MMC_RIRQE);
-	D32(EMAC_MMC_RIRQS);
-	D32(EMAC_MMC_TIRQE);
-	D32(EMAC_MMC_TIRQS);
-	D32(EMAC_OPMODE);
-	D32(EMAC_RXC_ALIGN);
-	D32(EMAC_RXC_ALLFRM);
-	D32(EMAC_RXC_ALLOCT);
-	D32(EMAC_RXC_BROAD);
-	D32(EMAC_RXC_DMAOVF);
-	D32(EMAC_RXC_EQ64);
-	D32(EMAC_RXC_FCS);
-	D32(EMAC_RXC_GE1024);
-	D32(EMAC_RXC_LNERRI);
-	D32(EMAC_RXC_LNERRO);
-	D32(EMAC_RXC_LONG);
-	D32(EMAC_RXC_LT1024);
-	D32(EMAC_RXC_LT128);
-	D32(EMAC_RXC_LT256);
-	D32(EMAC_RXC_LT512);
-	D32(EMAC_RXC_MACCTL);
-	D32(EMAC_RXC_MULTI);
-	D32(EMAC_RXC_OCTET);
-	D32(EMAC_RXC_OK);
-	D32(EMAC_RXC_OPCODE);
-	D32(EMAC_RXC_PAUSE);
-	D32(EMAC_RXC_SHORT);
-	D32(EMAC_RXC_TYPED);
-	D32(EMAC_RXC_UNICST);
-	D32(EMAC_RX_IRQE);
-	D32(EMAC_RX_STAT);
-	D32(EMAC_RX_STKY);
-	D32(EMAC_STAADD);
-	D32(EMAC_STADAT);
-	D32(EMAC_SYSCTL);
-	D32(EMAC_SYSTAT);
-	D32(EMAC_TXC_1COL);
-	D32(EMAC_TXC_ABORT);
-	D32(EMAC_TXC_ALLFRM);
-	D32(EMAC_TXC_ALLOCT);
-	D32(EMAC_TXC_BROAD);
-	D32(EMAC_TXC_CRSERR);
-	D32(EMAC_TXC_DEFER);
-	D32(EMAC_TXC_DMAUND);
-	D32(EMAC_TXC_EQ64);
-	D32(EMAC_TXC_GE1024);
-	D32(EMAC_TXC_GT1COL);
-	D32(EMAC_TXC_LATECL);
-	D32(EMAC_TXC_LT1024);
-	D32(EMAC_TXC_LT128);
-	D32(EMAC_TXC_LT256);
-	D32(EMAC_TXC_LT512);
-	D32(EMAC_TXC_MACCTL);
-	D32(EMAC_TXC_MULTI);
-	D32(EMAC_TXC_OCTET);
-	D32(EMAC_TXC_OK);
-	D32(EMAC_TXC_UNICST);
-	D32(EMAC_TXC_XS_COL);
-	D32(EMAC_TXC_XS_DFR);
-	D32(EMAC_TX_IRQE);
-	D32(EMAC_TX_STAT);
-	D32(EMAC_TX_STKY);
-	D32(EMAC_VLAN1);
-	D32(EMAC_VLAN2);
-	D32(EMAC_WKUP_CTL);
-	D32(EMAC_WKUP_FFCMD);
-	D32(EMAC_WKUP_FFCRC0);
-	D32(EMAC_WKUP_FFCRC1);
-	D32(EMAC_WKUP_FFMSK0);
-	D32(EMAC_WKUP_FFMSK1);
-	D32(EMAC_WKUP_FFMSK2);
-	D32(EMAC_WKUP_FFMSK3);
-	D32(EMAC_WKUP_FFOFF);
-# ifdef EMAC_PTP_ACCR
-	D32(EMAC_PTP_ACCR);
-	D32(EMAC_PTP_ADDEND);
-	D32(EMAC_PTP_ALARMHI);
-	D32(EMAC_PTP_ALARMLO);
-	D16(EMAC_PTP_CTL);
-	D32(EMAC_PTP_FOFF);
-	D32(EMAC_PTP_FV1);
-	D32(EMAC_PTP_FV2);
-	D32(EMAC_PTP_FV3);
-	D16(EMAC_PTP_ID_OFF);
-	D32(EMAC_PTP_ID_SNAP);
-	D16(EMAC_PTP_IE);
-	D16(EMAC_PTP_ISTAT);
-	D32(EMAC_PTP_OFFSET);
-	D32(EMAC_PTP_PPS_PERIOD);
-	D32(EMAC_PTP_PPS_STARTHI);
-	D32(EMAC_PTP_PPS_STARTLO);
-	D32(EMAC_PTP_RXSNAPHI);
-	D32(EMAC_PTP_RXSNAPLO);
-	D32(EMAC_PTP_TIMEHI);
-	D32(EMAC_PTP_TIMELO);
-	D32(EMAC_PTP_TXSNAPHI);
-	D32(EMAC_PTP_TXSNAPLO);
-# endif
-#endif
-
-#if defined(EPPI0_STATUS) || defined(EPPI1_STATUS) || defined(EPPI2_STATUS)
-	parent = debugfs_create_dir("eppi", top);
-# ifdef EPPI0_STATUS
-	EPPI(0);
-# endif
-# ifdef EPPI1_STATUS
-	EPPI(1);
-# endif
-# ifdef EPPI2_STATUS
-	EPPI(2);
-# endif
-#endif
-
-	parent = debugfs_create_dir("gptimer", top);
-#ifdef TIMER_ENABLE
-	GPTIMER_GROUP(TIMER_ENABLE, -1);
-#endif
-#ifdef TIMER_ENABLE0
-	GPTIMER_GROUP(TIMER_ENABLE0, 0);
-#endif
-#ifdef TIMER_ENABLE1
-	GPTIMER_GROUP(TIMER_ENABLE1, 1);
-#endif
-	/* XXX: Should convert BF561 MMR names */
-#ifdef TMRS4_DISABLE
-	GPTIMER_GROUP(TMRS4_ENABLE, 0);
-	GPTIMER_GROUP(TMRS8_ENABLE, 1);
-#endif
-	GPTIMER(0);
-	GPTIMER(1);
-	GPTIMER(2);
-#ifdef TIMER3_CONFIG
-	GPTIMER(3);
-	GPTIMER(4);
-	GPTIMER(5);
-	GPTIMER(6);
-	GPTIMER(7);
-#endif
-#ifdef TIMER8_CONFIG
-	GPTIMER(8);
-	GPTIMER(9);
-	GPTIMER(10);
-#endif
-#ifdef TIMER11_CONFIG
-	GPTIMER(11);
-#endif
-
-#ifdef HMDMA0_CONTROL
-	parent = debugfs_create_dir("hmdma", top);
-	HMDMA(0);
-	HMDMA(1);
-#endif
-
-#ifdef HOST_CONTROL
-	parent = debugfs_create_dir("hostdp", top);
-	D16(HOST_CONTROL);
-	D16(HOST_STATUS);
-	D16(HOST_TIMEOUT);
-#endif
-
-#ifdef IMDMA_S0_CONFIG
-	parent = debugfs_create_dir("imdma", top);
-	IMDMA(0);
-	IMDMA(1);
-#endif
-
-#ifdef KPAD_CTL
-	parent = debugfs_create_dir("keypad", top);
-	D16(KPAD_CTL);
-	D16(KPAD_PRESCALE);
-	D16(KPAD_MSEL);
-	D16(KPAD_ROWCOL);
-	D16(KPAD_STAT);
-	D16(KPAD_SOFTEVAL);
-#endif
-
-	parent = debugfs_create_dir("mdma", top);
-	MDMA(0);
-	MDMA(1);
-#ifdef MDMA_D2_CONFIG
-	MDMA(2);
-	MDMA(3);
-#endif
-
-#ifdef MXVR_CONFIG
-	parent = debugfs_create_dir("mxvr", top);
-	D16(MXVR_CONFIG);
-# ifdef MXVR_PLL_CTL_0
-	D32(MXVR_PLL_CTL_0);
-# endif
-	D32(MXVR_STATE_0);
-	D32(MXVR_STATE_1);
-	D32(MXVR_INT_STAT_0);
-	D32(MXVR_INT_STAT_1);
-	D32(MXVR_INT_EN_0);
-	D32(MXVR_INT_EN_1);
-	D16(MXVR_POSITION);
-	D16(MXVR_MAX_POSITION);
-	D16(MXVR_DELAY);
-	D16(MXVR_MAX_DELAY);
-	D32(MXVR_LADDR);
-	D16(MXVR_GADDR);
-	D32(MXVR_AADDR);
-	D32(MXVR_ALLOC_0);
-	D32(MXVR_ALLOC_1);
-	D32(MXVR_ALLOC_2);
-	D32(MXVR_ALLOC_3);
-	D32(MXVR_ALLOC_4);
-	D32(MXVR_ALLOC_5);
-	D32(MXVR_ALLOC_6);
-	D32(MXVR_ALLOC_7);
-	D32(MXVR_ALLOC_8);
-	D32(MXVR_ALLOC_9);
-	D32(MXVR_ALLOC_10);
-	D32(MXVR_ALLOC_11);
-	D32(MXVR_ALLOC_12);
-	D32(MXVR_ALLOC_13);
-	D32(MXVR_ALLOC_14);
-	D32(MXVR_SYNC_LCHAN_0);
-	D32(MXVR_SYNC_LCHAN_1);
-	D32(MXVR_SYNC_LCHAN_2);
-	D32(MXVR_SYNC_LCHAN_3);
-	D32(MXVR_SYNC_LCHAN_4);
-	D32(MXVR_SYNC_LCHAN_5);
-	D32(MXVR_SYNC_LCHAN_6);
-	D32(MXVR_SYNC_LCHAN_7);
-	D32(MXVR_DMA0_CONFIG);
-	D32(MXVR_DMA0_START_ADDR);
-	D16(MXVR_DMA0_COUNT);
-	D32(MXVR_DMA0_CURR_ADDR);
-	D16(MXVR_DMA0_CURR_COUNT);
-	D32(MXVR_DMA1_CONFIG);
-	D32(MXVR_DMA1_START_ADDR);
-	D16(MXVR_DMA1_COUNT);
-	D32(MXVR_DMA1_CURR_ADDR);
-	D16(MXVR_DMA1_CURR_COUNT);
-	D32(MXVR_DMA2_CONFIG);
-	D32(MXVR_DMA2_START_ADDR);
-	D16(MXVR_DMA2_COUNT);
-	D32(MXVR_DMA2_CURR_ADDR);
-	D16(MXVR_DMA2_CURR_COUNT);
-	D32(MXVR_DMA3_CONFIG);
-	D32(MXVR_DMA3_START_ADDR);
-	D16(MXVR_DMA3_COUNT);
-	D32(MXVR_DMA3_CURR_ADDR);
-	D16(MXVR_DMA3_CURR_COUNT);
-	D32(MXVR_DMA4_CONFIG);
-	D32(MXVR_DMA4_START_ADDR);
-	D16(MXVR_DMA4_COUNT);
-	D32(MXVR_DMA4_CURR_ADDR);
-	D16(MXVR_DMA4_CURR_COUNT);
-	D32(MXVR_DMA5_CONFIG);
-	D32(MXVR_DMA5_START_ADDR);
-	D16(MXVR_DMA5_COUNT);
-	D32(MXVR_DMA5_CURR_ADDR);
-	D16(MXVR_DMA5_CURR_COUNT);
-	D32(MXVR_DMA6_CONFIG);
-	D32(MXVR_DMA6_START_ADDR);
-	D16(MXVR_DMA6_COUNT);
-	D32(MXVR_DMA6_CURR_ADDR);
-	D16(MXVR_DMA6_CURR_COUNT);
-	D32(MXVR_DMA7_CONFIG);
-	D32(MXVR_DMA7_START_ADDR);
-	D16(MXVR_DMA7_COUNT);
-	D32(MXVR_DMA7_CURR_ADDR);
-	D16(MXVR_DMA7_CURR_COUNT);
-	D16(MXVR_AP_CTL);
-	D32(MXVR_APRB_START_ADDR);
-	D32(MXVR_APRB_CURR_ADDR);
-	D32(MXVR_APTB_START_ADDR);
-	D32(MXVR_APTB_CURR_ADDR);
-	D32(MXVR_CM_CTL);
-	D32(MXVR_CMRB_START_ADDR);
-	D32(MXVR_CMRB_CURR_ADDR);
-	D32(MXVR_CMTB_START_ADDR);
-	D32(MXVR_CMTB_CURR_ADDR);
-	D32(MXVR_RRDB_START_ADDR);
-	D32(MXVR_RRDB_CURR_ADDR);
-	D32(MXVR_PAT_DATA_0);
-	D32(MXVR_PAT_EN_0);
-	D32(MXVR_PAT_DATA_1);
-	D32(MXVR_PAT_EN_1);
-	D16(MXVR_FRAME_CNT_0);
-	D16(MXVR_FRAME_CNT_1);
-	D32(MXVR_ROUTING_0);
-	D32(MXVR_ROUTING_1);
-	D32(MXVR_ROUTING_2);
-	D32(MXVR_ROUTING_3);
-	D32(MXVR_ROUTING_4);
-	D32(MXVR_ROUTING_5);
-	D32(MXVR_ROUTING_6);
-	D32(MXVR_ROUTING_7);
-	D32(MXVR_ROUTING_8);
-	D32(MXVR_ROUTING_9);
-	D32(MXVR_ROUTING_10);
-	D32(MXVR_ROUTING_11);
-	D32(MXVR_ROUTING_12);
-	D32(MXVR_ROUTING_13);
-	D32(MXVR_ROUTING_14);
-# ifdef MXVR_PLL_CTL_1
-	D32(MXVR_PLL_CTL_1);
-# endif
-	D16(MXVR_BLOCK_CNT);
-# ifdef MXVR_CLK_CTL
-	D32(MXVR_CLK_CTL);
-# endif
-# ifdef MXVR_CDRPLL_CTL
-	D32(MXVR_CDRPLL_CTL);
-# endif
-# ifdef MXVR_FMPLL_CTL
-	D32(MXVR_FMPLL_CTL);
-# endif
-# ifdef MXVR_PIN_CTL
-	D16(MXVR_PIN_CTL);
-# endif
-# ifdef MXVR_SCLK_CNT
-	D16(MXVR_SCLK_CNT);
-# endif
-#endif
-
-#ifdef NFC_ADDR
-	parent = debugfs_create_dir("nfc", top);
-	D_WO(NFC_ADDR, 16);
-	D_WO(NFC_CMD, 16);
-	D_RO(NFC_COUNT, 16);
-	D16(NFC_CTL);
-	D_WO(NFC_DATA_RD, 16);
-	D_WO(NFC_DATA_WR, 16);
-	D_RO(NFC_ECC0, 16);
-	D_RO(NFC_ECC1, 16);
-	D_RO(NFC_ECC2, 16);
-	D_RO(NFC_ECC3, 16);
-	D16(NFC_IRQMASK);
-	D16(NFC_IRQSTAT);
-	D_WO(NFC_PGCTL, 16);
-	D_RO(NFC_READ, 16);
-	D16(NFC_RST);
-	D_RO(NFC_STAT, 16);
-#endif
-
-#ifdef OTP_CONTROL
-	parent = debugfs_create_dir("otp", top);
-	D16(OTP_CONTROL);
-	D16(OTP_BEN);
-	D16(OTP_STATUS);
-	D32(OTP_TIMING);
-	D32(OTP_DATA0);
-	D32(OTP_DATA1);
-	D32(OTP_DATA2);
-	D32(OTP_DATA3);
-#endif
-
-#ifdef PINT0_MASK_SET
-	parent = debugfs_create_dir("pint", top);
-	PINT(0);
-	PINT(1);
-	PINT(2);
-	PINT(3);
-#endif
-
-#ifdef PIXC_CTL
-	parent = debugfs_create_dir("pixc", top);
-	D16(PIXC_CTL);
-	D16(PIXC_PPL);
-	D16(PIXC_LPF);
-	D16(PIXC_AHSTART);
-	D16(PIXC_AHEND);
-	D16(PIXC_AVSTART);
-	D16(PIXC_AVEND);
-	D16(PIXC_ATRANSP);
-	D16(PIXC_BHSTART);
-	D16(PIXC_BHEND);
-	D16(PIXC_BVSTART);
-	D16(PIXC_BVEND);
-	D16(PIXC_BTRANSP);
-	D16(PIXC_INTRSTAT);
-	D32(PIXC_RYCON);
-	D32(PIXC_GUCON);
-	D32(PIXC_BVCON);
-	D32(PIXC_CCBIAS);
-	D32(PIXC_TC);
-#endif
-
-	parent = debugfs_create_dir("pll", top);
-	D16(PLL_CTL);
-	D16(PLL_DIV);
-	D16(PLL_LOCKCNT);
-	D16(PLL_STAT);
-	D16(VR_CTL);
-	D32(CHIPID);	/* it's part of this hardware block */
-
-#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL)
-	parent = debugfs_create_dir("ppi", top);
-# ifdef PPI_CONTROL
-	bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1);
-# endif
-# ifdef PPI0_CONTROL
-	PPI(0);
-# endif
-# ifdef PPI1_CONTROL
-	PPI(1);
-# endif
-#endif
-
-#ifdef PWM_CTRL
-	parent = debugfs_create_dir("pwm", top);
-	D16(PWM_CTRL);
-	D16(PWM_STAT);
-	D16(PWM_TM);
-	D16(PWM_DT);
-	D16(PWM_GATE);
-	D16(PWM_CHA);
-	D16(PWM_CHB);
-	D16(PWM_CHC);
-	D16(PWM_SEG);
-	D16(PWM_SYNCWT);
-	D16(PWM_CHAL);
-	D16(PWM_CHBL);
-	D16(PWM_CHCL);
-	D16(PWM_LSI);
-	D16(PWM_STAT2);
-#endif
-
-#ifdef RSI_CONFIG
-	parent = debugfs_create_dir("rsi", top);
-	D32(RSI_ARGUMENT);
-	D16(RSI_CEATA_CONTROL);
-	D16(RSI_CLK_CONTROL);
-	D16(RSI_COMMAND);
-	D16(RSI_CONFIG);
-	D16(RSI_DATA_CNT);
-	D16(RSI_DATA_CONTROL);
-	D16(RSI_DATA_LGTH);
-	D32(RSI_DATA_TIMER);
-	D16(RSI_EMASK);
-	D16(RSI_ESTAT);
-	D32(RSI_FIFO);
-	D16(RSI_FIFO_CNT);
-	D32(RSI_MASK0);
-	D32(RSI_MASK1);
-	D16(RSI_PID0);
-	D16(RSI_PID1);
-	D16(RSI_PID2);
-	D16(RSI_PID3);
-	D16(RSI_PID4);
-	D16(RSI_PID5);
-	D16(RSI_PID6);
-	D16(RSI_PID7);
-	D16(RSI_PWR_CONTROL);
-	D16(RSI_RD_WAIT_EN);
-	D32(RSI_RESPONSE0);
-	D32(RSI_RESPONSE1);
-	D32(RSI_RESPONSE2);
-	D32(RSI_RESPONSE3);
-	D16(RSI_RESP_CMD);
-	D32(RSI_STATUS);
-	D_WO(RSI_STATUSCL, 16);
-#endif
-
-#ifdef RTC_ALARM
-	parent = debugfs_create_dir("rtc", top);
-	D32(RTC_ALARM);
-	D16(RTC_ICTL);
-	D16(RTC_ISTAT);
-	D16(RTC_PREN);
-	D32(RTC_STAT);
-	D16(RTC_SWCNT);
-#endif
-
-#ifdef SDH_CFG
-	parent = debugfs_create_dir("sdh", top);
-	D32(SDH_ARGUMENT);
-	D16(SDH_CFG);
-	D16(SDH_CLK_CTL);
-	D16(SDH_COMMAND);
-	D_RO(SDH_DATA_CNT, 16);
-	D16(SDH_DATA_CTL);
-	D16(SDH_DATA_LGTH);
-	D32(SDH_DATA_TIMER);
-	D16(SDH_E_MASK);
-	D16(SDH_E_STATUS);
-	D32(SDH_FIFO);
-	D_RO(SDH_FIFO_CNT, 16);
-	D32(SDH_MASK0);
-	D32(SDH_MASK1);
-	D_RO(SDH_PID0, 16);
-	D_RO(SDH_PID1, 16);
-	D_RO(SDH_PID2, 16);
-	D_RO(SDH_PID3, 16);
-	D_RO(SDH_PID4, 16);
-	D_RO(SDH_PID5, 16);
-	D_RO(SDH_PID6, 16);
-	D_RO(SDH_PID7, 16);
-	D16(SDH_PWR_CTL);
-	D16(SDH_RD_WAIT_EN);
-	D_RO(SDH_RESPONSE0, 32);
-	D_RO(SDH_RESPONSE1, 32);
-	D_RO(SDH_RESPONSE2, 32);
-	D_RO(SDH_RESPONSE3, 32);
-	D_RO(SDH_RESP_CMD, 16);
-	D_RO(SDH_STATUS, 32);
-	D_WO(SDH_STATUS_CLR, 16);
-#endif
-
-#ifdef SECURE_CONTROL
-	parent = debugfs_create_dir("security", top);
-	D16(SECURE_CONTROL);
-	D16(SECURE_STATUS);
-	D32(SECURE_SYSSWT);
-#endif
-
-	parent = debugfs_create_dir("sic", top);
-	D16(SWRST);
-	D16(SYSCR);
-	D16(SIC_RVECT);
-	D32(SIC_IAR0);
-	D32(SIC_IAR1);
-	D32(SIC_IAR2);
-#ifdef SIC_IAR3
-	D32(SIC_IAR3);
-#endif
-#ifdef SIC_IAR4
-	D32(SIC_IAR4);
-	D32(SIC_IAR5);
-	D32(SIC_IAR6);
-#endif
-#ifdef SIC_IAR7
-	D32(SIC_IAR7);
-#endif
-#ifdef SIC_IAR8
-	D32(SIC_IAR8);
-	D32(SIC_IAR9);
-	D32(SIC_IAR10);
-	D32(SIC_IAR11);
-#endif
-#ifdef SIC_IMASK
-	D32(SIC_IMASK);
-	D32(SIC_ISR);
-	D32(SIC_IWR);
-#endif
-#ifdef SIC_IMASK0
-	D32(SIC_IMASK0);
-	D32(SIC_IMASK1);
-	D32(SIC_ISR0);
-	D32(SIC_ISR1);
-	D32(SIC_IWR0);
-	D32(SIC_IWR1);
-#endif
-#ifdef SIC_IMASK2
-	D32(SIC_IMASK2);
-	D32(SIC_ISR2);
-	D32(SIC_IWR2);
-#endif
-#ifdef SICB_RVECT
-	D16(SICB_SWRST);
-	D16(SICB_SYSCR);
-	D16(SICB_RVECT);
-	D32(SICB_IAR0);
-	D32(SICB_IAR1);
-	D32(SICB_IAR2);
-	D32(SICB_IAR3);
-	D32(SICB_IAR4);
-	D32(SICB_IAR5);
-	D32(SICB_IAR6);
-	D32(SICB_IAR7);
-	D32(SICB_IMASK0);
-	D32(SICB_IMASK1);
-	D32(SICB_ISR0);
-	D32(SICB_ISR1);
-	D32(SICB_IWR0);
-	D32(SICB_IWR1);
-#endif
-
-	parent = debugfs_create_dir("spi", top);
-#ifdef SPI0_REGBASE
-	SPI(0);
-#endif
-#ifdef SPI1_REGBASE
-	SPI(1);
-#endif
-#ifdef SPI2_REGBASE
-	SPI(2);
-#endif
-
-	parent = debugfs_create_dir("sport", top);
-#ifdef SPORT0_STAT
-	SPORT(0);
-#endif
-#ifdef SPORT1_STAT
-	SPORT(1);
-#endif
-#ifdef SPORT2_STAT
-	SPORT(2);
-#endif
-#ifdef SPORT3_STAT
-	SPORT(3);
-#endif
-
-#if defined(TWI_CLKDIV) || defined(TWI0_CLKDIV) || defined(TWI1_CLKDIV)
-	parent = debugfs_create_dir("twi", top);
-# ifdef TWI_CLKDIV
-	bfin_debug_mmrs_twi(parent, TWI_CLKDIV, -1);
-# endif
-# ifdef TWI0_CLKDIV
-	TWI(0);
-# endif
-# ifdef TWI1_CLKDIV
-	TWI(1);
-# endif
-#endif
-
-	parent = debugfs_create_dir("uart", top);
-#ifdef BFIN_UART_DLL
-	bfin_debug_mmrs_uart(parent, BFIN_UART_DLL, -1);
-#endif
-#ifdef UART0_DLL
-	UART(0);
-#endif
-#ifdef UART1_DLL
-	UART(1);
-#endif
-#ifdef UART2_DLL
-	UART(2);
-#endif
-#ifdef UART3_DLL
-	UART(3);
-#endif
-
-#ifdef USB_FADDR
-	parent = debugfs_create_dir("usb", top);
-	D16(USB_FADDR);
-	D16(USB_POWER);
-	D16(USB_INTRTX);
-	D16(USB_INTRRX);
-	D16(USB_INTRTXE);
-	D16(USB_INTRRXE);
-	D16(USB_INTRUSB);
-	D16(USB_INTRUSBE);
-	D16(USB_FRAME);
-	D16(USB_INDEX);
-	D16(USB_TESTMODE);
-	D16(USB_GLOBINTR);
-	D16(USB_GLOBAL_CTL);
-	D16(USB_TX_MAX_PACKET);
-	D16(USB_CSR0);
-	D16(USB_TXCSR);
-	D16(USB_RX_MAX_PACKET);
-	D16(USB_RXCSR);
-	D16(USB_COUNT0);
-	D16(USB_RXCOUNT);
-	D16(USB_TXTYPE);
-	D16(USB_NAKLIMIT0);
-	D16(USB_TXINTERVAL);
-	D16(USB_RXTYPE);
-	D16(USB_RXINTERVAL);
-	D16(USB_TXCOUNT);
-	D16(USB_EP0_FIFO);
-	D16(USB_EP1_FIFO);
-	D16(USB_EP2_FIFO);
-	D16(USB_EP3_FIFO);
-	D16(USB_EP4_FIFO);
-	D16(USB_EP5_FIFO);
-	D16(USB_EP6_FIFO);
-	D16(USB_EP7_FIFO);
-	D16(USB_OTG_DEV_CTL);
-	D16(USB_OTG_VBUS_IRQ);
-	D16(USB_OTG_VBUS_MASK);
-	D16(USB_LINKINFO);
-	D16(USB_VPLEN);
-	D16(USB_HS_EOF1);
-	D16(USB_FS_EOF1);
-	D16(USB_LS_EOF1);
-	D16(USB_APHY_CNTRL);
-	D16(USB_APHY_CALIB);
-	D16(USB_APHY_CNTRL2);
-	D16(USB_PLLOSC_CTRL);
-	D16(USB_SRP_CLKDIV);
-	D16(USB_EP_NI0_TXMAXP);
-	D16(USB_EP_NI0_TXCSR);
-	D16(USB_EP_NI0_RXMAXP);
-	D16(USB_EP_NI0_RXCSR);
-	D16(USB_EP_NI0_RXCOUNT);
-	D16(USB_EP_NI0_TXTYPE);
-	D16(USB_EP_NI0_TXINTERVAL);
-	D16(USB_EP_NI0_RXTYPE);
-	D16(USB_EP_NI0_RXINTERVAL);
-	D16(USB_EP_NI0_TXCOUNT);
-	D16(USB_EP_NI1_TXMAXP);
-	D16(USB_EP_NI1_TXCSR);
-	D16(USB_EP_NI1_RXMAXP);
-	D16(USB_EP_NI1_RXCSR);
-	D16(USB_EP_NI1_RXCOUNT);
-	D16(USB_EP_NI1_TXTYPE);
-	D16(USB_EP_NI1_TXINTERVAL);
-	D16(USB_EP_NI1_RXTYPE);
-	D16(USB_EP_NI1_RXINTERVAL);
-	D16(USB_EP_NI1_TXCOUNT);
-	D16(USB_EP_NI2_TXMAXP);
-	D16(USB_EP_NI2_TXCSR);
-	D16(USB_EP_NI2_RXMAXP);
-	D16(USB_EP_NI2_RXCSR);
-	D16(USB_EP_NI2_RXCOUNT);
-	D16(USB_EP_NI2_TXTYPE);
-	D16(USB_EP_NI2_TXINTERVAL);
-	D16(USB_EP_NI2_RXTYPE);
-	D16(USB_EP_NI2_RXINTERVAL);
-	D16(USB_EP_NI2_TXCOUNT);
-	D16(USB_EP_NI3_TXMAXP);
-	D16(USB_EP_NI3_TXCSR);
-	D16(USB_EP_NI3_RXMAXP);
-	D16(USB_EP_NI3_RXCSR);
-	D16(USB_EP_NI3_RXCOUNT);
-	D16(USB_EP_NI3_TXTYPE);
-	D16(USB_EP_NI3_TXINTERVAL);
-	D16(USB_EP_NI3_RXTYPE);
-	D16(USB_EP_NI3_RXINTERVAL);
-	D16(USB_EP_NI3_TXCOUNT);
-	D16(USB_EP_NI4_TXMAXP);
-	D16(USB_EP_NI4_TXCSR);
-	D16(USB_EP_NI4_RXMAXP);
-	D16(USB_EP_NI4_RXCSR);
-	D16(USB_EP_NI4_RXCOUNT);
-	D16(USB_EP_NI4_TXTYPE);
-	D16(USB_EP_NI4_TXINTERVAL);
-	D16(USB_EP_NI4_RXTYPE);
-	D16(USB_EP_NI4_RXINTERVAL);
-	D16(USB_EP_NI4_TXCOUNT);
-	D16(USB_EP_NI5_TXMAXP);
-	D16(USB_EP_NI5_TXCSR);
-	D16(USB_EP_NI5_RXMAXP);
-	D16(USB_EP_NI5_RXCSR);
-	D16(USB_EP_NI5_RXCOUNT);
-	D16(USB_EP_NI5_TXTYPE);
-	D16(USB_EP_NI5_TXINTERVAL);
-	D16(USB_EP_NI5_RXTYPE);
-	D16(USB_EP_NI5_RXINTERVAL);
-	D16(USB_EP_NI5_TXCOUNT);
-	D16(USB_EP_NI6_TXMAXP);
-	D16(USB_EP_NI6_TXCSR);
-	D16(USB_EP_NI6_RXMAXP);
-	D16(USB_EP_NI6_RXCSR);
-	D16(USB_EP_NI6_RXCOUNT);
-	D16(USB_EP_NI6_TXTYPE);
-	D16(USB_EP_NI6_TXINTERVAL);
-	D16(USB_EP_NI6_RXTYPE);
-	D16(USB_EP_NI6_RXINTERVAL);
-	D16(USB_EP_NI6_TXCOUNT);
-	D16(USB_EP_NI7_TXMAXP);
-	D16(USB_EP_NI7_TXCSR);
-	D16(USB_EP_NI7_RXMAXP);
-	D16(USB_EP_NI7_RXCSR);
-	D16(USB_EP_NI7_RXCOUNT);
-	D16(USB_EP_NI7_TXTYPE);
-	D16(USB_EP_NI7_TXINTERVAL);
-	D16(USB_EP_NI7_RXTYPE);
-	D16(USB_EP_NI7_RXINTERVAL);
-	D16(USB_EP_NI7_TXCOUNT);
-	D16(USB_DMA_INTERRUPT);
-	D16(USB_DMA0CONTROL);
-	D16(USB_DMA0ADDRLOW);
-	D16(USB_DMA0ADDRHIGH);
-	D16(USB_DMA0COUNTLOW);
-	D16(USB_DMA0COUNTHIGH);
-	D16(USB_DMA1CONTROL);
-	D16(USB_DMA1ADDRLOW);
-	D16(USB_DMA1ADDRHIGH);
-	D16(USB_DMA1COUNTLOW);
-	D16(USB_DMA1COUNTHIGH);
-	D16(USB_DMA2CONTROL);
-	D16(USB_DMA2ADDRLOW);
-	D16(USB_DMA2ADDRHIGH);
-	D16(USB_DMA2COUNTLOW);
-	D16(USB_DMA2COUNTHIGH);
-	D16(USB_DMA3CONTROL);
-	D16(USB_DMA3ADDRLOW);
-	D16(USB_DMA3ADDRHIGH);
-	D16(USB_DMA3COUNTLOW);
-	D16(USB_DMA3COUNTHIGH);
-	D16(USB_DMA4CONTROL);
-	D16(USB_DMA4ADDRLOW);
-	D16(USB_DMA4ADDRHIGH);
-	D16(USB_DMA4COUNTLOW);
-	D16(USB_DMA4COUNTHIGH);
-	D16(USB_DMA5CONTROL);
-	D16(USB_DMA5ADDRLOW);
-	D16(USB_DMA5ADDRHIGH);
-	D16(USB_DMA5COUNTLOW);
-	D16(USB_DMA5COUNTHIGH);
-	D16(USB_DMA6CONTROL);
-	D16(USB_DMA6ADDRLOW);
-	D16(USB_DMA6ADDRHIGH);
-	D16(USB_DMA6COUNTLOW);
-	D16(USB_DMA6COUNTHIGH);
-	D16(USB_DMA7CONTROL);
-	D16(USB_DMA7ADDRLOW);
-	D16(USB_DMA7ADDRHIGH);
-	D16(USB_DMA7COUNTLOW);
-	D16(USB_DMA7COUNTHIGH);
-#endif
-
-#ifdef WDOG_CNT
-	parent = debugfs_create_dir("watchdog", top);
-	D32(WDOG_CNT);
-	D16(WDOG_CTL);
-	D32(WDOG_STAT);
-#endif
-#ifdef WDOGA_CNT
-	parent = debugfs_create_dir("watchdog", top);
-	D32(WDOGA_CNT);
-	D16(WDOGA_CTL);
-	D32(WDOGA_STAT);
-	D32(WDOGB_CNT);
-	D16(WDOGB_CTL);
-	D32(WDOGB_STAT);
-#endif
-
-	/* BF533 glue */
-#ifdef FIO_FLAG_D
-#define PORTFIO FIO_FLAG_D
-#endif
-	/* BF561 glue */
-#ifdef FIO0_FLAG_D
-#define PORTFIO FIO0_FLAG_D
-#endif
-#ifdef FIO1_FLAG_D
-#define PORTGIO FIO1_FLAG_D
-#endif
-#ifdef FIO2_FLAG_D
-#define PORTHIO FIO2_FLAG_D
-#endif
-	parent = debugfs_create_dir("port", top);
-#ifdef PORTFIO
-	PORT(PORTFIO, 'F');
-#endif
-#ifdef PORTGIO
-	PORT(PORTGIO, 'G');
-#endif
-#ifdef PORTHIO
-	PORT(PORTHIO, 'H');
-#endif
-
-#ifdef __ADSPBF51x__
-	D16(PORTF_FER);
-	D16(PORTF_DRIVE);
-	D16(PORTF_HYSTERESIS);
-	D16(PORTF_MUX);
-
-	D16(PORTG_FER);
-	D16(PORTG_DRIVE);
-	D16(PORTG_HYSTERESIS);
-	D16(PORTG_MUX);
-
-	D16(PORTH_FER);
-	D16(PORTH_DRIVE);
-	D16(PORTH_HYSTERESIS);
-	D16(PORTH_MUX);
-
-	D16(MISCPORT_DRIVE);
-	D16(MISCPORT_HYSTERESIS);
-#endif	/* BF51x */
-
-#ifdef __ADSPBF52x__
-	D16(PORTF_FER);
-	D16(PORTF_DRIVE);
-	D16(PORTF_HYSTERESIS);
-	D16(PORTF_MUX);
-	D16(PORTF_SLEW);
-
-	D16(PORTG_FER);
-	D16(PORTG_DRIVE);
-	D16(PORTG_HYSTERESIS);
-	D16(PORTG_MUX);
-	D16(PORTG_SLEW);
-
-	D16(PORTH_FER);
-	D16(PORTH_DRIVE);
-	D16(PORTH_HYSTERESIS);
-	D16(PORTH_MUX);
-	D16(PORTH_SLEW);
-
-	D16(MISCPORT_DRIVE);
-	D16(MISCPORT_HYSTERESIS);
-	D16(MISCPORT_SLEW);
-#endif	/* BF52x */
-
-#ifdef BF537_FAMILY
-	D16(PORTF_FER);
-	D16(PORTG_FER);
-	D16(PORTH_FER);
-	D16(PORT_MUX);
-#endif	/* BF534 BF536 BF537 */
-
-#ifdef BF538_FAMILY
-	D16(PORTCIO_FER);
-	D16(PORTCIO);
-	D16(PORTCIO_CLEAR);
-	D16(PORTCIO_SET);
-	D16(PORTCIO_TOGGLE);
-	D16(PORTCIO_DIR);
-	D16(PORTCIO_INEN);
-
-	D16(PORTDIO);
-	D16(PORTDIO_CLEAR);
-	D16(PORTDIO_DIR);
-	D16(PORTDIO_FER);
-	D16(PORTDIO_INEN);
-	D16(PORTDIO_SET);
-	D16(PORTDIO_TOGGLE);
-
-	D16(PORTEIO);
-	D16(PORTEIO_CLEAR);
-	D16(PORTEIO_DIR);
-	D16(PORTEIO_FER);
-	D16(PORTEIO_INEN);
-	D16(PORTEIO_SET);
-	D16(PORTEIO_TOGGLE);
-#endif	/* BF538 BF539 */
-
-#ifdef __ADSPBF54x__
-	{
-		int num;
-		unsigned long base;
-
-		base = PORTA_FER;
-		for (num = 0; num < 10; ++num) {
-			PORT(base, num);
-			base += sizeof(struct bfin_gpio_regs);
-		}
-
-	}
-#endif	/* BF54x */
-#endif /* CONFIG_BF60x */
-	debug_mmrs_dentry = top;
-
-	return 0;
-}
-module_init(bfin_debug_mmrs_init);
-
-static void __exit bfin_debug_mmrs_exit(void)
-{
-	debugfs_remove_recursive(debug_mmrs_dentry);
-}
-module_exit(bfin_debug_mmrs_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
deleted file mode 100644
index 477bb29a7987..000000000000
--- a/arch/blackfin/kernel/dma-mapping.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Dynamic DMA mapping support
- *
- * Copyright 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/export.h>
-#include <linux/bitmap.h>
-
-static spinlock_t dma_page_lock;
-static unsigned long *dma_page;
-static unsigned int dma_pages;
-static unsigned long dma_base;
-static unsigned long dma_size;
-static unsigned int dma_initialized;
-
-static void dma_alloc_init(unsigned long start, unsigned long end)
-{
-	spin_lock_init(&dma_page_lock);
-	dma_initialized = 0;
-
-	dma_page = (unsigned long *)__get_free_page(GFP_KERNEL);
-	memset(dma_page, 0, PAGE_SIZE);
-	dma_base = PAGE_ALIGN(start);
-	dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
-	dma_pages = dma_size >> PAGE_SHIFT;
-	memset((void *)dma_base, 0, DMA_UNCACHED_REGION);
-	dma_initialized = 1;
-
-	printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __func__,
-	       dma_page, dma_pages, dma_base);
-}
-
-static inline unsigned int get_pages(size_t size)
-{
-	return ((size - 1) >> PAGE_SHIFT) + 1;
-}
-
-static unsigned long __alloc_dma_pages(unsigned int pages)
-{
-	unsigned long ret = 0, flags;
-	unsigned long start;
-
-	if (dma_initialized == 0)
-		dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend);
-
-	spin_lock_irqsave(&dma_page_lock, flags);
-
-	start = bitmap_find_next_zero_area(dma_page, dma_pages, 0, pages, 0);
-	if (start < dma_pages) {
-		ret = dma_base + (start << PAGE_SHIFT);
-		bitmap_set(dma_page, start, pages);
-	}
-	spin_unlock_irqrestore(&dma_page_lock, flags);
-	return ret;
-}
-
-static void __free_dma_pages(unsigned long addr, unsigned int pages)
-{
-	unsigned long page = (addr - dma_base) >> PAGE_SHIFT;
-	unsigned long flags;
-
-	if ((page + pages) > dma_pages) {
-		printk(KERN_ERR "%s: freeing outside range.\n", __func__);
-		BUG();
-	}
-
-	spin_lock_irqsave(&dma_page_lock, flags);
-	bitmap_clear(dma_page, page, pages);
-	spin_unlock_irqrestore(&dma_page_lock, flags);
-}
-
-static void *bfin_dma_alloc(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret;
-
-	ret = (void *)__alloc_dma_pages(get_pages(size));
-
-	if (ret) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_phys(ret);
-	}
-
-	return ret;
-}
-
-static void bfin_dma_free(struct device *dev, size_t size, void *vaddr,
-		  dma_addr_t dma_handle, unsigned long attrs)
-{
-	__free_dma_pages((unsigned long)vaddr, get_pages(size));
-}
-
-/*
- * Streaming DMA mappings
- */
-void __dma_sync(dma_addr_t addr, size_t size,
-		enum dma_data_direction dir)
-{
-	__dma_sync_inline(addr, size, dir);
-}
-EXPORT_SYMBOL(__dma_sync);
-
-static int bfin_dma_map_sg(struct device *dev, struct scatterlist *sg_list,
-		int nents, enum dma_data_direction direction,
-		unsigned long attrs)
-{
-	struct scatterlist *sg;
-	int i;
-
-	for_each_sg(sg_list, sg, nents, i) {
-		sg->dma_address = (dma_addr_t) sg_virt(sg);
-
-		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
-			continue;
-
-		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
-	}
-
-	return nents;
-}
-
-static void bfin_dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sg_list, int nelems,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	for_each_sg(sg_list, sg, nelems, i) {
-		sg->dma_address = (dma_addr_t) sg_virt(sg);
-		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
-	}
-}
-
-static dma_addr_t bfin_dma_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir,
-		unsigned long attrs)
-{
-	dma_addr_t handle = (dma_addr_t)(page_address(page) + offset);
-
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		_dma_sync(handle, size, dir);
-
-	return handle;
-}
-
-static inline void bfin_dma_sync_single_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	_dma_sync(handle, size, dir);
-}
-
-const struct dma_map_ops bfin_dma_ops = {
-	.alloc			= bfin_dma_alloc,
-	.free			= bfin_dma_free,
-
-	.map_page		= bfin_dma_map_page,
-	.map_sg			= bfin_dma_map_sg,
-
-	.sync_single_for_device	= bfin_dma_sync_single_for_device,
-	.sync_sg_for_device	= bfin_dma_sync_sg_for_device,
-};
-EXPORT_SYMBOL(bfin_dma_ops);
diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c
deleted file mode 100644
index 3c992c1f8ef2..000000000000
--- a/arch/blackfin/kernel/dumpstack.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* Provide basic stack dumping functions
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/kernel.h>
-#include <linux/thread_info.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <linux/module.h>
-#include <linux/sched/debug.h>
-
-#include <asm/trace.h>
-
-/*
- * Checks to see if the address pointed to is either a
- * 16-bit CALL instruction, or a 32-bit CALL instruction
- */
-static bool is_bfin_call(unsigned short *addr)
-{
-	unsigned int opcode;
-
-	if (!get_instruction(&opcode, addr))
-		return false;
-
-	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
-	    (opcode >= 0x0070 && opcode <= 0x0077) ||
-	    (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
-		return true;
-
-	return false;
-
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-#ifdef CONFIG_PRINTK
-	unsigned int *addr, *endstack, *fp = 0, *frame;
-	unsigned short *ins_addr;
-	char buf[150];
-	unsigned int i, j, ret_addr, frame_no = 0;
-
-	/*
-	 * If we have been passed a specific stack, use that one otherwise
-	 *    if we have been passed a task structure, use that, otherwise
-	 *    use the stack of where the variable "stack" exists
-	 */
-
-	if (stack == NULL) {
-		if (task) {
-			/* We know this is a kernel stack, so this is the start/end */
-			stack = (unsigned long *)task->thread.ksp;
-			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
-		} else {
-			/* print out the existing stack info */
-			stack = (unsigned long *)&stack;
-			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-		}
-	} else
-		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-
-	printk(KERN_NOTICE "Stack info:\n");
-	decode_address(buf, (unsigned int)stack);
-	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
-
-	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
-		printk(KERN_NOTICE "Invalid stack pointer\n");
-		return;
-	}
-
-	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
-		if (*addr & 0x1)
-			continue;
-		ins_addr = (unsigned short *)*addr;
-		ins_addr--;
-		if (is_bfin_call(ins_addr))
-			fp = addr - 1;
-
-		if (fp) {
-			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack
-			       && fp && ((unsigned int) fp & 0x3) == 0)
-				fp = (unsigned int *)*fp;
-			if (fp == 0 || fp == endstack) {
-				fp = addr - 1;
-				break;
-			}
-			fp = 0;
-		}
-	}
-	if (fp) {
-		frame = fp;
-		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
-	} else
-		frame = 0;
-
-	/*
-	 * Now that we think we know where things are, we
-	 * walk the stack again, this time printing things out
-	 * incase there is no frame pointer, we still look for
-	 * valid return addresses
-	 */
-
-	/* First time print out data, next time, print out symbols */
-	for (j = 0; j <= 1; j++) {
-		if (j)
-			printk(KERN_NOTICE "Return addresses in stack:\n");
-		else
-			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
-
-		fp = frame;
-		frame_no = 0;
-
-		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr < endstack; addr++, i++) {
-
-			ret_addr = 0;
-			if (!j && i % 8 == 0)
-				printk(KERN_NOTICE "%p:", addr);
-
-			/* if it is an odd address, or zero, just skip it */
-			if (*addr & 0x1 || !*addr)
-				goto print;
-
-			ins_addr = (unsigned short *)*addr;
-
-			/* Go back one instruction, and see if it is a CALL */
-			ins_addr--;
-			ret_addr = is_bfin_call(ins_addr);
- print:
-			if (!j && stack == (unsigned long *)addr)
-				printk("[%08x]", *addr);
-			else if (ret_addr)
-				if (j) {
-					decode_address(buf, (unsigned int)*addr);
-					if (frame == addr) {
-						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
-						continue;
-					}
-					printk(KERN_NOTICE "    address : %s\n", buf);
-				} else
-					printk("<%08x>", *addr);
-			else if (fp == addr) {
-				if (j)
-					frame = addr+1;
-				else
-					printk("(%08x)", *addr);
-
-				fp = (unsigned int *)*addr;
-				frame_no++;
-
-			} else if (!j)
-				printk(" %08x ", *addr);
-		}
-		if (!j)
-			printk("\n");
-	}
-#endif
-}
-EXPORT_SYMBOL(show_stack);
-
-void dump_stack(void)
-{
-	unsigned long stack;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags;
-#endif
-	trace_buffer_save(tflags);
-	dump_bfin_trace_buffer();
-	dump_stack_print_info(KERN_DEFAULT);
-	show_stack(current, &stack);
-	trace_buffer_restore(tflags);
-}
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
deleted file mode 100644
index 4b89af9243d3..000000000000
--- a/arch/blackfin/kernel/early_printk.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * allow a console to be used for early printk
- * derived from arch/x86/kernel/early_printk.c
- *
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2
- */
-
-#include <linux/kernel.h>
-#include <linux/sched/debug.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/string.h>
-#include <linux/reboot.h>
-#include <asm/blackfin.h>
-#include <asm/irq_handler.h>
-#include <asm/early_printk.h>
-
-#ifdef CONFIG_SERIAL_BFIN
-extern struct console *bfin_earlyserial_init(unsigned int port,
-						unsigned int cflag);
-#endif
-#ifdef CONFIG_BFIN_JTAG_COMM
-extern struct console *bfin_jc_early_init(void);
-#endif
-
-/* Default console */
-#define DEFAULT_PORT 0
-#define DEFAULT_CFLAG CS8|B57600
-
-/* Default console for early crashes */
-#define DEFAULT_EARLY_PORT "serial,uart0,57600"
-
-#ifdef CONFIG_SERIAL_CORE
-/* What should get here is "0,57600" */
-static struct console * __init earlyserial_init(char *buf)
-{
-	int baud, bit;
-	char parity;
-	unsigned int serial_port = DEFAULT_PORT;
-	unsigned int cflag = DEFAULT_CFLAG;
-
-	serial_port = simple_strtoul(buf, &buf, 10);
-	buf++;
-
-	cflag = 0;
-	baud = simple_strtoul(buf, &buf, 10);
-	switch (baud) {
-	case 1200:
-		cflag |= B1200;
-		break;
-	case 2400:
-		cflag |= B2400;
-		break;
-	case 4800:
-		cflag |= B4800;
-		break;
-	case 9600:
-		cflag |= B9600;
-		break;
-	case 19200:
-		cflag |= B19200;
-		break;
-	case 38400:
-		cflag |= B38400;
-		break;
-	case 115200:
-		cflag |= B115200;
-		break;
-	default:
-		cflag |= B57600;
-	}
-
-	parity = buf[0];
-	buf++;
-	switch (parity) {
-	case 'e':
-		cflag |= PARENB;
-		break;
-	case 'o':
-		cflag |= PARODD;
-		break;
-	}
-
-	bit = simple_strtoul(buf, &buf, 10);
-	switch (bit) {
-	case 5:
-		cflag |= CS5;
-		break;
-	case 6:
-		cflag |= CS6;
-		break;
-	case 7:
-		cflag |= CS7;
-		break;
-	default:
-		cflag |= CS8;
-	}
-
-#ifdef CONFIG_SERIAL_BFIN
-	return bfin_earlyserial_init(serial_port, cflag);
-#else
-	return NULL;
-#endif
-
-}
-#endif
-
-int __init setup_early_printk(char *buf)
-{
-
-	/* Crashing in here would be really bad, so check both the var
-	   and the pointer before we start using it
-	 */
-	if (!buf)
-		return 0;
-
-	if (!*buf)
-		return 0;
-
-	if (early_console != NULL)
-		return 0;
-
-#ifdef CONFIG_SERIAL_BFIN
-	/* Check for Blackfin Serial */
-	if (!strncmp(buf, "serial,uart", 11)) {
-		buf += 11;
-		early_console = earlyserial_init(buf);
-	}
-#endif
-
-#ifdef CONFIG_BFIN_JTAG_COMM
-	/* Check for Blackfin JTAG */
-	if (!strncmp(buf, "jtag", 4)) {
-		buf += 4;
-		early_console = bfin_jc_early_init();
-	}
-#endif
-
-#ifdef CONFIG_FB
-		/* TODO: add framebuffer console support */
-#endif
-
-	if (likely(early_console)) {
-		early_console->flags |= CON_BOOT;
-
-		register_console(early_console);
-		printk(KERN_INFO "early printk enabled on %s%d\n",
-			early_console->name,
-			early_console->index);
-	}
-
-	return 0;
-}
-
-/*
- * Set up a temporary Event Vector Table, so if something bad happens before
- * the kernel is fully started, it doesn't vector off into somewhere we don't
- * know
- */
-
-asmlinkage void __init init_early_exception_vectors(void)
-{
-	u32 evt;
-	SSYNC();
-
-	/*
-	 * This starts up the shadow buffer, incase anything crashes before
-	 * setup arch
-	 */
-	mark_shadow_error();
-	early_shadow_puts(linux_banner);
-	early_shadow_stamp();
-
-	if (CPUID != bfin_cpuid()) {
-		early_shadow_puts("Running on wrong machine type, expected");
-		early_shadow_reg(CPUID, 16);
-		early_shadow_puts(", but running on");
-		early_shadow_reg(bfin_cpuid(), 16);
-		early_shadow_puts("\n");
-	}
-
-	/* cannot program in software:
-	 * evt0 - emulation (jtag)
-	 * evt1 - reset
-	 */
-	for (evt = EVT2; evt <= EVT15; evt += 4)
-		bfin_write32(evt, early_trap);
-	CSYNC();
-
-	/* Set all the return from interrupt, exception, NMI to a known place
-	 * so if we do a RETI, RETX or RETN by mistake - we go somewhere known
-	 * Note - don't change RETS - we are in a subroutine, or
-	 * RETE - since it might screw up if emulator is attached
-	 */
-	asm("\tRETI = %0; RETX = %0; RETN = %0;\n"
-		: : "p"(early_trap));
-
-}
-
-__attribute__((__noreturn__))
-asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
-{
-	/* This can happen before the uart is initialized, so initialize
-	 * the UART now (but only if we are running on the processor we think
-	 * we are compiled for - otherwise we write to MMRs that don't exist,
-	 * and cause other problems. Nothing comes out the UART, but it does
-	 * end up in the __buf_log.
-	 */
-	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
-		setup_early_printk(DEFAULT_EARLY_PORT);
-
-	if (!shadow_console_enabled()) {
-		/* crap - we crashed before setup_arch() */
-		early_shadow_puts("panic before setup_arch\n");
-		early_shadow_puts("IPEND:");
-		early_shadow_reg(fp->ipend, 16);
-		if (fp->seqstat & SEQSTAT_EXCAUSE) {
-			early_shadow_puts("\nEXCAUSE:");
-			early_shadow_reg(fp->seqstat & SEQSTAT_EXCAUSE, 8);
-		}
-		if (fp->seqstat & SEQSTAT_HWERRCAUSE) {
-			early_shadow_puts("\nHWERRCAUSE:");
-			early_shadow_reg(
-				(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14, 8);
-		}
-		early_shadow_puts("\nErr @");
-		if (fp->ipend & EVT_EVX)
-			early_shadow_reg(fp->retx, 32);
-		else
-			early_shadow_reg(fp->pc, 32);
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-		early_shadow_puts("\nTrace:");
-		if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
-			while (bfin_read_TBUFSTAT() & TBUFCNT) {
-				early_shadow_puts("\nT  :");
-				early_shadow_reg(bfin_read_TBUF(), 32);
-				early_shadow_puts("\n S :");
-				early_shadow_reg(bfin_read_TBUF(), 32);
-			}
-		}
-#endif
-		early_shadow_puts("\nUse bfin-elf-addr2line to determine "
-			"function names\n");
-		/*
-		 * We should panic(), but we can't - since panic calls printk,
-		 * and printk uses memcpy.
-		 * we want to reboot, but if the machine type is different,
-		 * can't due to machine specific reboot sequences
-		 */
-		if (CPUID == bfin_cpuid()) {
-			early_shadow_puts("Trying to restart\n");
-			machine_restart("");
-		}
-
-		early_shadow_puts("Halting, since it is not safe to restart\n");
-		while (1)
-			asm volatile ("EMUEXCPT; IDLE;\n");
-
-	} else {
-		printk(KERN_EMERG "Early panic\n");
-		show_regs(fp);
-		dump_bfin_trace_buffer();
-	}
-
-	panic("Died early");
-}
-
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
deleted file mode 100644
index 4071265fc4fe..000000000000
--- a/arch/blackfin/kernel/entry.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/errno.h>
-#include <asm/blackfin.h>
-#include <asm/asm-offsets.h>
-
-#include <asm/context.S>
-
-#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
-.section .l1.text
-#else
-.text
-#endif
-
-ENTRY(_ret_from_fork)
-#ifdef CONFIG_IPIPE
-	/*
-	 * Hw IRQs are off on entry, and we don't want the scheduling tail
-	 * code to starve high priority domains from interrupts while it
-	 * runs. Therefore we first stall the root stage to have the
-	 * virtual interrupt state reflect IMASK.
-	 */
-	p0.l = ___ipipe_root_status;
-	p0.h = ___ipipe_root_status;
-	r4 = [p0];
-	bitset(r4, 0);
-	[p0] = r4;
-	/*
-	 * Then we may enable hw IRQs, allowing preemption from high
-	 * priority domains. schedule_tail() will do local_irq_enable()
-	 * since Blackfin does not define __ARCH_WANT_UNLOCKED_CTXSW, so
-	 * there is no need to unstall the root domain by ourselves
-	 * afterwards.
-	 */
-	p0.l = _bfin_irq_flags;
-	p0.h = _bfin_irq_flags;
-	r4 = [p0];
-	sti r4;
-#endif /* CONFIG_IPIPE */
-	SP += -12;
-	pseudo_long_call _schedule_tail, p5;
-	SP += 12;
-	p1 = [sp++];
-	r0 = [sp++];
-	cc = p1 == 0;
-	if cc jump .Lfork;
-	sp += -12;
-	call (p1);
-	sp += 12;
-.Lfork:
-	RESTORE_CONTEXT
-	rti;
-ENDPROC(_ret_from_fork)
diff --git a/arch/blackfin/kernel/exception.c b/arch/blackfin/kernel/exception.c
deleted file mode 100644
index 9208b5fd5186..000000000000
--- a/arch/blackfin/kernel/exception.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Basic functions for adding/removing custom exception handlers
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/module.h>
-#include <asm/irq_handler.h>
-
-int bfin_request_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
-
-	if (curr_handler != ex_replaceable)
-		return -EBUSY;
-
-	ex_table[exception] = handler;
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_request_exception);
-
-int bfin_free_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
-
-	if (curr_handler != handler)
-		return -EBUSY;
-
-	ex_table[exception] = ex_replaceable;
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_free_exception);
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
deleted file mode 100644
index 0565917f23ba..000000000000
--- a/arch/blackfin/kernel/fixed_code.S
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * This file contains sequences of code that will be copied to a
- * fixed location, defined in <asm/fixed_code.h>.  The interrupt
- * handlers ensure that these sequences appear to be atomic when
- * executed from userspace.
- * These are aligned to 16 bytes, so that we have some space to replace
- * these sequences with something else (e.g. kernel traps if we ever do
- * BF561 SMP).
- *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/unistd.h>
-#include <asm/entry.h>
-
-__INIT
-
-ENTRY(_fixed_code_start)
-
-.align 16
-ENTRY(_sigreturn_stub)
-	P0 = __NR_rt_sigreturn;
-	EXCPT 0;
-	/* Speculative execution paranoia.  */
-0:	JUMP.S 0b;
-ENDPROC (_sigreturn_stub)
-
-.align 16
-	/*
-	 * Atomic swap, 8 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R1: value to store
-	 * Output:	R0: old contents of the memory address, zero extended.
-	 */
-ENTRY(_atomic_xchg32)
-	R0 = [P0];
-	[P0] = R1;
-	rts;
-ENDPROC (_atomic_xchg32)
-
-.align 16
-	/*
-	 * Compare and swap, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R1: compare value
-	 *		R2: new value to store
-	 * The new value is stored if the contents of the memory
-	 * address is equal to the compare value.
-	 * Output:	R0: old contents of the memory address.
-	 */
-ENTRY(_atomic_cas32)
-	R0 = [P0];
-	CC = R0 == R1;
-	IF !CC JUMP 1f;
-	[P0] = R2;
-1:
-	rts;
-ENDPROC (_atomic_cas32)
-
-.align 16
-	/*
-	 * Atomic add, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R0: value to add
-	 * Outputs:	R0: new contents of the memory address.
-	 *		R1: previous contents of the memory address.
-	 */
-ENTRY(_atomic_add32)
-	R1 = [P0];
-	R0 = R1 + R0;
-	[P0] = R0;
-	rts;
-ENDPROC (_atomic_add32)
-
-.align 16
-	/*
-	 * Atomic sub, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R0: value to subtract
-	 * Outputs:	R0: new contents of the memory address.
-	 *		R1: previous contents of the memory address.
-	 */
-ENTRY(_atomic_sub32)
-	R1 = [P0];
-	R0 = R1 - R0;
-	[P0] = R0;
-	rts;
-ENDPROC (_atomic_sub32)
-
-.align 16
-	/*
-	 * Atomic ior, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R0: value to ior
-	 * Outputs:	R0: new contents of the memory address.
-	 *		R1: previous contents of the memory address.
-	 */
-ENTRY(_atomic_ior32)
-	R1 = [P0];
-	R0 = R1 | R0;
-	[P0] = R0;
-	rts;
-ENDPROC (_atomic_ior32)
-
-.align 16
-	/*
-	 * Atomic and, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R0: value to and
-	 * Outputs:	R0: new contents of the memory address.
-	 *		R1: previous contents of the memory address.
-	 */
-ENTRY(_atomic_and32)
-	R1 = [P0];
-	R0 = R1 & R0;
-	[P0] = R0;
-	rts;
-ENDPROC (_atomic_and32)
-
-.align 16
-	/*
-	 * Atomic xor, 32 bit.
-	 * Inputs:	P0: memory address to use
-	 *		R0: value to xor
-	 * Outputs:	R0: new contents of the memory address.
-	 *		R1: previous contents of the memory address.
-	 */
-ENTRY(_atomic_xor32)
-	R1 = [P0];
-	R0 = R1 ^ R0;
-	[P0] = R0;
-	rts;
-ENDPROC (_atomic_xor32)
-
-.align 16
-	/*
-	 * safe_user_instruction
-	 * Four NOPS are enough to allow the pipeline to speculativily load
-	 * execute anything it wants. After that, things have gone bad, and
-	 * we are stuck - so panic. Since we might be in user space, we can't
-	 * call panic, so just cause a unhandled exception, this should cause
-	 * a dump of the trace buffer so we can tell were we are, and a reboot
-	 */
-ENTRY(_safe_user_instruction)
-	NOP; NOP; NOP; NOP;
-	EXCPT 0x4;
-ENDPROC(_safe_user_instruction)
-
-ENTRY(_fixed_code_end)
-
-__FINIT
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
deleted file mode 100644
index 8ebc54daaa8e..000000000000
--- a/arch/blackfin/kernel/flat.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/mm_types.h>
-#include <linux/flat.h>
-
-#define FLAT_BFIN_RELOC_TYPE_16_BIT 0
-#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1
-#define FLAT_BFIN_RELOC_TYPE_32_BIT 2
-
-unsigned long bfin_get_addr_from_rp(u32 *ptr,
-		u32 relval,
-		u32 flags,
-		u32 *persistent)
-{
-	unsigned short *usptr = (unsigned short *)ptr;
-	int type = (relval >> 26) & 7;
-	u32 val;
-
-	switch (type) {
-	case FLAT_BFIN_RELOC_TYPE_16_BIT:
-	case FLAT_BFIN_RELOC_TYPE_16H_BIT:
-		usptr = (unsigned short *)ptr;
-		pr_debug("*usptr = %x", get_unaligned(usptr));
-		val = get_unaligned(usptr);
-		val += *persistent;
-		break;
-
-	case FLAT_BFIN_RELOC_TYPE_32_BIT:
-		pr_debug("*ptr = %x", get_unaligned(ptr));
-		val = get_unaligned(ptr);
-		break;
-
-	default:
-		pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", type);
-		return 0;
-	}
-
-	/*
-	 * Stack-relative relocs contain the offset into the stack, we
-	 * have to add the stack's start address here and return 1 from
-	 * flat_addr_absolute to prevent the normal address calculations
-	 */
-	if (relval & (1 << 29))
-		return val + current->mm->context.end_brk;
-
-	if ((flags & FLAT_FLAG_GOTPIC) == 0)
-		val = htonl(val);
-	return val;
-}
-EXPORT_SYMBOL(bfin_get_addr_from_rp);
-
-/*
- * Insert the address ADDR into the symbol reference at RP;
- * RELVAL is the raw relocation-table entry from which RP is derived
- */
-void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval)
-{
-	unsigned short *usptr = (unsigned short *)ptr;
-	int type = (relval >> 26) & 7;
-
-	switch (type) {
-	case FLAT_BFIN_RELOC_TYPE_16_BIT:
-		put_unaligned(addr, usptr);
-		pr_debug("new value %x at %p", get_unaligned(usptr), usptr);
-		break;
-
-	case FLAT_BFIN_RELOC_TYPE_16H_BIT:
-		put_unaligned(addr >> 16, usptr);
-		pr_debug("new value %x", get_unaligned(usptr));
-		break;
-
-	case FLAT_BFIN_RELOC_TYPE_32_BIT:
-		put_unaligned(addr, ptr);
-		pr_debug("new ptr =%x", get_unaligned(ptr));
-		break;
-	}
-}
-EXPORT_SYMBOL(bfin_put_addr_at_rp);
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
deleted file mode 100644
index 3b8bdcbb7da3..000000000000
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * mcount and friends -- ftrace stuff
- *
- * Copyright (C) 2009-2010 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/linkage.h>
-#include <asm/ftrace.h>
-
-.text
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-/* Simple stub so we can boot the kernel until runtime patching has
- * disabled all calls to this.  Then it'll be unused.
- */
-ENTRY(__mcount)
-# if ANOMALY_05000371
-	nop; nop; nop; nop;
-# endif
-	rts;
-ENDPROC(__mcount)
-
-/* GCC will have called us before setting up the function prologue, so we
- * can clobber the normal scratch registers, but we need to make sure to
- * save/restore the registers used for argument passing (R0-R2) in case
- * the profiled function is using them.  With data registers, R3 is the
- * only one we can blow away.  With pointer registers, we have P0-P2.
- *
- * Upon entry, the RETS will point to the top of the current profiled
- * function.  And since GCC pushed the previous RETS for us, the previous
- * function will be waiting there.  mmmm pie.
- */
-ENTRY(_ftrace_caller)
-	/* save first/second/third function arg and the return register */
-	[--sp] = r2;
-	[--sp] = r0;
-	[--sp] = r1;
-	[--sp] = rets;
-
-	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
-	 *  ip: this point was called by ...
-	 *  parent_ip: ... this function
-	 * the ip itself will need adjusting for the mcount call
-	 */
-	r0 = rets;
-	r1 = [sp + 16];	/* skip the 4 local regs on stack */
-	r0 += -MCOUNT_INSN_SIZE;
-
-.globl _ftrace_call
-_ftrace_call:
-	call _ftrace_stub
-
-# ifdef CONFIG_FUNCTION_GRAPH_TRACER
-.globl _ftrace_graph_call
-_ftrace_graph_call:
-	nop;	/* jump _ftrace_graph_caller; */
-# endif
-
-	/* restore state and get out of dodge */
-.Lfinish_trace:
-	rets = [sp++];
-	r1 = [sp++];
-	r0 = [sp++];
-	r2 = [sp++];
-
-.globl _ftrace_stub
-_ftrace_stub:
-	rts;
-ENDPROC(_ftrace_caller)
-
-#else
-
-/* See documentation for _ftrace_caller */
-ENTRY(__mcount)
-	/* save third function arg early so we can do testing below */
-	[--sp] = r2;
-
-	/* load the function pointer to the tracer */
-	p0.l = _ftrace_trace_function;
-	p0.h = _ftrace_trace_function;
-	r3 = [p0];
-
-	/* optional micro optimization: don't call the stub tracer */
-	r2.l = _ftrace_stub;
-	r2.h = _ftrace_stub;
-	cc = r2 == r3;
-	if ! cc jump .Ldo_trace;
-
-# ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* if the ftrace_graph_return function pointer is not set to
-	 * the ftrace_stub entry, call prepare_ftrace_return().
-	 */
-	p0.l = _ftrace_graph_return;
-	p0.h = _ftrace_graph_return;
-	r3 = [p0];
-	cc = r2 == r3;
-	if ! cc jump _ftrace_graph_caller;
-
-	/* similarly, if the ftrace_graph_entry function pointer is not
-	 * set to the ftrace_graph_entry_stub entry, ...
-	 */
-	p0.l = _ftrace_graph_entry;
-	p0.h = _ftrace_graph_entry;
-	r2.l = _ftrace_graph_entry_stub;
-	r2.h = _ftrace_graph_entry_stub;
-	r3 = [p0];
-	cc = r2 == r3;
-	if ! cc jump _ftrace_graph_caller;
-# endif
-
-	r2 = [sp++];
-	rts;
-
-.Ldo_trace:
-
-	/* save first/second function arg and the return register */
-	[--sp] = r0;
-	[--sp] = r1;
-	[--sp] = rets;
-
-	/* setup the tracer function */
-	p0 = r3;
-
-	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
-	 *  ip: this point was called by ...
-	 *  parent_ip: ... this function
-	 * the ip itself will need adjusting for the mcount call
-	 */
-	r0 = rets;
-	r1 = [sp + 16];	/* skip the 4 local regs on stack */
-	r0 += -MCOUNT_INSN_SIZE;
-
-	/* call the tracer */
-	call (p0);
-
-	/* restore state and get out of dodge */
-.Lfinish_trace:
-	rets = [sp++];
-	r1 = [sp++];
-	r0 = [sp++];
-	r2 = [sp++];
-
-.globl _ftrace_stub
-_ftrace_stub:
-	rts;
-ENDPROC(__mcount)
-
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-/* The prepare_ftrace_return() function is similar to the trace function
- * except it takes a pointer to the location of the frompc.  This is so
- * the prepare_ftrace_return() can hijack it temporarily for probing
- * purposes.
- */
-ENTRY(_ftrace_graph_caller)
-# ifndef CONFIG_DYNAMIC_FTRACE
-	/* save first/second function arg and the return register */
-	[--sp] = r0;
-	[--sp] = r1;
-	[--sp] = rets;
-
-	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
-	r0 = sp;	/* unsigned long *parent */
-	r1 = rets;	/* unsigned long self_addr */
-# else
-	r0 = sp;	/* unsigned long *parent */
-	r1 = [sp];	/* unsigned long self_addr */
-# endif
-# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	r2 = fp;	/* unsigned long frame_pointer */
-# endif
-	r0 += 16;	/* skip the 4 local regs on stack */
-	r1 += -MCOUNT_INSN_SIZE;
-	call _prepare_ftrace_return;
-
-	jump .Lfinish_trace;
-ENDPROC(_ftrace_graph_caller)
-
-/* Undo the rewrite caused by ftrace_graph_caller().  The common function
- * ftrace_return_to_handler() will return the original rets so we can
- * restore it and be on our way.
- */
-ENTRY(_return_to_handler)
-	/* make sure original return values are saved */
-	[--sp] = p0;
-	[--sp] = r0;
-	[--sp] = r1;
-
-	/* get original return address */
-# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	r0 = fp;	/* Blackfin is sane, so omit this */
-# endif
-	call _ftrace_return_to_handler;
-	rets = r0;
-
-	/* anomaly 05000371 - make sure we have at least three instructions
-	 * between rets setting and the return
-	 */
-	r1 = [sp++];
-	r0 = [sp++];
-	p0 = [sp++];
-	rts;
-ENDPROC(_return_to_handler)
-#endif
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
deleted file mode 100644
index 8dad7589b843..000000000000
--- a/arch/blackfin/kernel/ftrace.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * ftrace graph code
- *
- * Copyright (C) 2009-2010 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/ftrace.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-static const unsigned char mnop[] = {
-	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
-	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
-};
-
-static void bfin_make_pcrel24(unsigned char *insn, unsigned long src,
-                              unsigned long dst)
-{
-	uint32_t pcrel = (dst - src) >> 1;
-	insn[0] = pcrel >> 16;
-	insn[1] = 0xe3;
-	insn[2] = pcrel;
-	insn[3] = pcrel >> 8;
-}
-#define bfin_make_pcrel24(insn, src, dst) bfin_make_pcrel24(insn, src, (unsigned long)(dst))
-
-static int ftrace_modify_code(unsigned long ip, const unsigned char *code,
-                              unsigned long len)
-{
-	int ret = probe_kernel_write((void *)ip, (void *)code, len);
-	flush_icache_range(ip, ip + len);
-	return ret;
-}
-
-int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
-                    unsigned long addr)
-{
-	/* Turn the mcount call site into two MNOPs as those are 32bit insns */
-	return ftrace_modify_code(rec->ip, mnop, sizeof(mnop));
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
-	/* Restore the mcount call site */
-	unsigned char call[8];
-	call[0] = 0x67; /* [--SP] = RETS; */
-	call[1] = 0x01;
-	bfin_make_pcrel24(&call[2], rec->ip + 2, addr);
-	call[6] = 0x27; /* RETS = [SP++]; */
-	call[7] = 0x01;
-	return ftrace_modify_code(rec->ip, call, sizeof(call));
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
-	unsigned char call[4];
-	unsigned long ip = (unsigned long)&ftrace_call;
-	bfin_make_pcrel24(call, ip, func);
-	return ftrace_modify_code(ip, call, sizeof(call));
-}
-
-int __init ftrace_dyn_arch_init(void)
-{
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-# ifdef CONFIG_DYNAMIC_FTRACE
-
-extern void ftrace_graph_call(void);
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
-	unsigned long ip = (unsigned long)&ftrace_graph_call;
-	uint16_t jump_pcrel12 = ((unsigned long)&ftrace_graph_caller - ip) >> 1;
-	jump_pcrel12 |= 0x2000;
-	return ftrace_modify_code(ip, (void *)&jump_pcrel12, sizeof(jump_pcrel12));
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
-	return ftrace_modify_code((unsigned long)&ftrace_graph_call, empty_zero_page, 2);
-}
-
-# endif
-
-/*
- * Hook the return address and push it in the stack of return addrs
- * in current thread info.
- */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-                           unsigned long frame_pointer)
-{
-	struct ftrace_graph_ent trace;
-	unsigned long return_hooker = (unsigned long)&return_to_handler;
-
-	if (unlikely(atomic_read(&current->tracing_graph_pause)))
-		return;
-
-	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth,
-				     frame_pointer, NULL) == -EBUSY)
-		return;
-
-	trace.func = self_addr;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		return;
-	}
-
-	/* all is well in the world !  hijack RETS ... */
-	*parent = return_hooker;
-}
-
-#endif
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
deleted file mode 100644
index d776773d3869..000000000000
--- a/arch/blackfin/kernel/gptimers.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- * gptimers.c - Blackfin General Purpose Timer core API
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- * Copyright (C) 2005 John DeHority
- * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
- *
- * Licensed under the GPLv2.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/blackfin.h>
-#include <asm/gptimers.h>
-
-#ifdef DEBUG
-# define tassert(expr)
-#else
-# define tassert(expr) \
-	if (!(expr)) \
-		printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
-#endif
-
-#ifndef CONFIG_BF60x
-# define BFIN_TIMER_NUM_GROUP  (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
-#else
-# define BFIN_TIMER_NUM_GROUP  1
-#endif
-
-static struct bfin_gptimer_regs * const timer_regs[MAX_BLACKFIN_GPTIMERS] =
-{
-	(void *)TIMER0_CONFIG,
-	(void *)TIMER1_CONFIG,
-	(void *)TIMER2_CONFIG,
-#if (MAX_BLACKFIN_GPTIMERS > 3)
-	(void *)TIMER3_CONFIG,
-	(void *)TIMER4_CONFIG,
-	(void *)TIMER5_CONFIG,
-	(void *)TIMER6_CONFIG,
-	(void *)TIMER7_CONFIG,
-# if (MAX_BLACKFIN_GPTIMERS > 8)
-	(void *)TIMER8_CONFIG,
-	(void *)TIMER9_CONFIG,
-	(void *)TIMER10_CONFIG,
-#  if (MAX_BLACKFIN_GPTIMERS > 11)
-	(void *)TIMER11_CONFIG,
-#  endif
-# endif
-#endif
-};
-
-static struct bfin_gptimer_group_regs * const group_regs[BFIN_TIMER_NUM_GROUP] =
-{
-	(void *)TIMER0_GROUP_REG,
-#if (MAX_BLACKFIN_GPTIMERS > 8)
-	(void *)TIMER8_GROUP_REG,
-#endif
-};
-
-static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] =
-{
-	TIMER_STATUS_TRUN0,
-	TIMER_STATUS_TRUN1,
-	TIMER_STATUS_TRUN2,
-#if (MAX_BLACKFIN_GPTIMERS > 3)
-	TIMER_STATUS_TRUN3,
-	TIMER_STATUS_TRUN4,
-	TIMER_STATUS_TRUN5,
-	TIMER_STATUS_TRUN6,
-	TIMER_STATUS_TRUN7,
-# if (MAX_BLACKFIN_GPTIMERS > 8)
-	TIMER_STATUS_TRUN8,
-	TIMER_STATUS_TRUN9,
-	TIMER_STATUS_TRUN10,
-#  if (MAX_BLACKFIN_GPTIMERS > 11)
-	TIMER_STATUS_TRUN11,
-#  endif
-# endif
-#endif
-};
-
-static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] =
-{
-	TIMER_STATUS_TOVF0,
-	TIMER_STATUS_TOVF1,
-	TIMER_STATUS_TOVF2,
-#if (MAX_BLACKFIN_GPTIMERS > 3)
-	TIMER_STATUS_TOVF3,
-	TIMER_STATUS_TOVF4,
-	TIMER_STATUS_TOVF5,
-	TIMER_STATUS_TOVF6,
-	TIMER_STATUS_TOVF7,
-# if (MAX_BLACKFIN_GPTIMERS > 8)
-	TIMER_STATUS_TOVF8,
-	TIMER_STATUS_TOVF9,
-	TIMER_STATUS_TOVF10,
-#  if (MAX_BLACKFIN_GPTIMERS > 11)
-	TIMER_STATUS_TOVF11,
-#  endif
-# endif
-#endif
-};
-
-static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] =
-{
-	TIMER_STATUS_TIMIL0,
-	TIMER_STATUS_TIMIL1,
-	TIMER_STATUS_TIMIL2,
-#if (MAX_BLACKFIN_GPTIMERS > 3)
-	TIMER_STATUS_TIMIL3,
-	TIMER_STATUS_TIMIL4,
-	TIMER_STATUS_TIMIL5,
-	TIMER_STATUS_TIMIL6,
-	TIMER_STATUS_TIMIL7,
-# if (MAX_BLACKFIN_GPTIMERS > 8)
-	TIMER_STATUS_TIMIL8,
-	TIMER_STATUS_TIMIL9,
-	TIMER_STATUS_TIMIL10,
-#  if (MAX_BLACKFIN_GPTIMERS > 11)
-	TIMER_STATUS_TIMIL11,
-#  endif
-# endif
-#endif
-};
-
-void set_gptimer_pwidth(unsigned int timer_id, uint32_t value)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&timer_regs[timer_id]->width, value);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_pwidth);
-
-uint32_t get_gptimer_pwidth(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return bfin_read(&timer_regs[timer_id]->width);
-}
-EXPORT_SYMBOL(get_gptimer_pwidth);
-
-void set_gptimer_period(unsigned int timer_id, uint32_t period)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&timer_regs[timer_id]->period, period);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_period);
-
-uint32_t get_gptimer_period(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return bfin_read(&timer_regs[timer_id]->period);
-}
-EXPORT_SYMBOL(get_gptimer_period);
-
-uint32_t get_gptimer_count(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return bfin_read(&timer_regs[timer_id]->counter);
-}
-EXPORT_SYMBOL(get_gptimer_count);
-
-#ifdef CONFIG_BF60x
-void set_gptimer_delay(unsigned int timer_id, uint32_t delay)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&timer_regs[timer_id]->delay, delay);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_delay);
-
-uint32_t get_gptimer_delay(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return bfin_read(&timer_regs[timer_id]->delay);
-}
-EXPORT_SYMBOL(get_gptimer_delay);
-#endif
-
-#ifdef CONFIG_BF60x
-int get_gptimer_intr(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat) & timil_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_intr);
-
-void clear_gptimer_intr(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat, timil_mask[timer_id]);
-}
-EXPORT_SYMBOL(clear_gptimer_intr);
-
-int get_gptimer_over(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat) & tovf_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_over);
-
-void clear_gptimer_over(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat, tovf_mask[timer_id]);
-}
-EXPORT_SYMBOL(clear_gptimer_over);
-
-int get_gptimer_run(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->run) & trun_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_run);
-
-uint32_t get_gptimer_status(unsigned int group)
-{
-	tassert(group < BFIN_TIMER_NUM_GROUP);
-	return bfin_read(&group_regs[group]->data_ilat);
-}
-EXPORT_SYMBOL(get_gptimer_status);
-
-void set_gptimer_status(unsigned int group, uint32_t value)
-{
-	tassert(group < BFIN_TIMER_NUM_GROUP);
-	bfin_write(&group_regs[group]->data_ilat, value);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_status);
-#else
-uint32_t get_gptimer_status(unsigned int group)
-{
-	tassert(group < BFIN_TIMER_NUM_GROUP);
-	return bfin_read(&group_regs[group]->status);
-}
-EXPORT_SYMBOL(get_gptimer_status);
-
-void set_gptimer_status(unsigned int group, uint32_t value)
-{
-	tassert(group < BFIN_TIMER_NUM_GROUP);
-	bfin_write(&group_regs[group]->status, value);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_status);
-
-static uint32_t read_gptimer_status(unsigned int timer_id)
-{
-	return bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status);
-}
-
-int get_gptimer_intr(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(read_gptimer_status(timer_id) & timil_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_intr);
-
-void clear_gptimer_intr(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, timil_mask[timer_id]);
-}
-EXPORT_SYMBOL(clear_gptimer_intr);
-
-int get_gptimer_over(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(read_gptimer_status(timer_id) & tovf_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_over);
-
-void clear_gptimer_over(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->status, tovf_mask[timer_id]);
-}
-EXPORT_SYMBOL(clear_gptimer_over);
-
-int get_gptimer_run(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return !!(read_gptimer_status(timer_id) & trun_mask[timer_id]);
-}
-EXPORT_SYMBOL(get_gptimer_run);
-#endif
-
-void set_gptimer_config(unsigned int timer_id, uint16_t config)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write(&timer_regs[timer_id]->config, config);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_config);
-
-uint16_t get_gptimer_config(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return bfin_read(&timer_regs[timer_id]->config);
-}
-EXPORT_SYMBOL(get_gptimer_config);
-
-void enable_gptimers(uint16_t mask)
-{
-	int i;
-#ifdef CONFIG_BF60x
-	uint16_t imask;
-	imask = bfin_read16(TIMER_DATA_IMSK);
-	imask &= ~mask;
-	bfin_write16(TIMER_DATA_IMSK, imask);
-#endif
-	tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0);
-	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) {
-		bfin_write(&group_regs[i]->enable, mask & 0xFF);
-		mask >>= 8;
-	}
-	SSYNC();
-}
-EXPORT_SYMBOL(enable_gptimers);
-
-static void _disable_gptimers(uint16_t mask)
-{
-	int i;
-	uint16_t m = mask;
-	tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0);
-	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) {
-		bfin_write(&group_regs[i]->disable, m & 0xFF);
-		m >>= 8;
-	}
-}
-
-void disable_gptimers(uint16_t mask)
-{
-#ifndef CONFIG_BF60x
-	int i;
-	_disable_gptimers(mask);
-	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
-		if (mask & (1 << i))
-			bfin_write(&group_regs[BFIN_TIMER_OCTET(i)]->status, trun_mask[i]);
-	SSYNC();
-#else
-	_disable_gptimers(mask);
-#endif
-}
-EXPORT_SYMBOL(disable_gptimers);
-
-void disable_gptimers_sync(uint16_t mask)
-{
-	_disable_gptimers(mask);
-	SSYNC();
-}
-EXPORT_SYMBOL(disable_gptimers_sync);
-
-void set_gptimer_pulse_hi(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write_or(&timer_regs[timer_id]->config, TIMER_PULSE_HI);
-	SSYNC();
-}
-EXPORT_SYMBOL(set_gptimer_pulse_hi);
-
-void clear_gptimer_pulse_hi(unsigned int timer_id)
-{
-	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	bfin_write_and(&timer_regs[timer_id]->config, ~TIMER_PULSE_HI);
-	SSYNC();
-}
-EXPORT_SYMBOL(clear_gptimer_pulse_hi);
-
-uint16_t get_enabled_gptimers(void)
-{
-	int i;
-	uint16_t result = 0;
-	for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i)
-		result |= (bfin_read(&group_regs[i]->enable) << (i << 3));
-	return result;
-}
-EXPORT_SYMBOL(get_enabled_gptimers);
-
-MODULE_AUTHOR("Axel Weiss (awe@aglaia-gmbh.de)");
-MODULE_DESCRIPTION("Blackfin General Purpose Timers API");
-MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
deleted file mode 100644
index f657b38163e3..000000000000
--- a/arch/blackfin/kernel/ipipe.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/* -*- linux-c -*-
- * linux/arch/blackfin/kernel/ipipe.c
- *
- * Copyright (C) 2005-2007 Philippe Gerum.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
- * USA; either version 2 of the License, or (at your option) any later
- * version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Architecture-dependent I-pipe support for the Blackfin.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/kthread.h>
-#include <linux/unistd.h>
-#include <linux/io.h>
-#include <linux/atomic.h>
-#include <asm/irq_handler.h>
-
-DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
-
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
-
-static void __ipipe_no_irqtail(void);
-
-unsigned long __ipipe_irq_tail_hook = (unsigned long)&__ipipe_no_irqtail;
-EXPORT_SYMBOL(__ipipe_irq_tail_hook);
-
-unsigned long __ipipe_core_clock;
-EXPORT_SYMBOL(__ipipe_core_clock);
-
-unsigned long __ipipe_freq_scale;
-EXPORT_SYMBOL(__ipipe_freq_scale);
-
-atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
-
-unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
-EXPORT_SYMBOL(__ipipe_irq_lvmask);
-
-static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
-{
-	desc->ipipe_ack(irq, desc);
-}
-
-/*
- * __ipipe_enable_pipeline() -- We are running on the boot CPU, hw
- * interrupts are off, and secondary CPUs are still lost in space.
- */
-void __ipipe_enable_pipeline(void)
-{
-	unsigned irq;
-
-	__ipipe_core_clock = get_cclk(); /* Fetch this once. */
-	__ipipe_freq_scale = 1000000000UL / __ipipe_core_clock;
-
-	for (irq = 0; irq < NR_IRQS; ++irq)
-		ipipe_virtualize_irq(ipipe_root_domain,
-				     irq,
-				     (ipipe_irq_handler_t)&asm_do_IRQ,
-				     NULL,
-				     &__ipipe_ack_irq,
-				     IPIPE_HANDLE_MASK | IPIPE_PASS_MASK);
-}
-
-/*
- * __ipipe_handle_irq() -- IPIPE's generic IRQ handler. An optimistic
- * interrupt protection log is maintained here for each domain. Hw
- * interrupts are masked on entry.
- */
-void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
-{
-	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
-	struct ipipe_domain *this_domain, *next_domain;
-	struct list_head *head, *pos;
-	struct ipipe_irqdesc *idesc;
-	int m_ack, s = -1;
-
-	/*
-	 * Software-triggered IRQs do not need any ack.  The contents
-	 * of the register frame should only be used when processing
-	 * the timer interrupt, but not for handling any other
-	 * interrupt.
-	 */
-	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-	this_domain = __ipipe_current_domain;
-	idesc = &this_domain->irqs[irq];
-
-	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
-		head = &this_domain->p_link;
-	else {
-		head = __ipipe_pipeline.next;
-		next_domain = list_entry(head, struct ipipe_domain, p_link);
-		idesc = &next_domain->irqs[irq];
-		if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
-			if (!m_ack && idesc->acknowledge != NULL)
-				idesc->acknowledge(irq, irq_to_desc(irq));
-			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG,
-						       &p->status);
-			__ipipe_dispatch_wired(next_domain, irq);
-			goto out;
-		}
-	}
-
-	/* Ack the interrupt. */
-
-	pos = head;
-	while (pos != &__ipipe_pipeline) {
-		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		idesc = &next_domain->irqs[irq];
-		if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
-			__ipipe_set_irq_pending(next_domain, irq);
-			if (!m_ack && idesc->acknowledge != NULL) {
-				idesc->acknowledge(irq, irq_to_desc(irq));
-				m_ack = 1;
-			}
-		}
-		if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
-			break;
-		pos = next_domain->p_link.next;
-	}
-
-	/*
-	 * Now walk the pipeline, yielding control to the highest
-	 * priority domain that has pending interrupt(s) or
-	 * immediately to the current domain if the interrupt has been
-	 * marked as 'sticky'. This search does not go beyond the
-	 * current domain in the pipeline. We also enforce the
-	 * additional root stage lock (blackfin-specific).
-	 */
-	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
-		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
-
-	/*
-	 * If the interrupt preempted the head domain, then do not
-	 * even try to walk the pipeline, unless an interrupt is
-	 * pending for it.
-	 */
-	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
-	    !__ipipe_ipending_p(ipipe_head_cpudom_ptr()))
-		goto out;
-
-	__ipipe_walk_pipeline(head);
-out:
-	if (!s)
-		__clear_bit(IPIPE_STALL_FLAG, &p->status);
-}
-
-void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = __ipipe_get_irq_priority(irq);
-
-	desc->depth = 0;
-	if (ipd != &ipipe_root &&
-	    atomic_inc_return(&__ipipe_irq_lvdepth[prio]) == 1)
-		__set_bit(prio, &__ipipe_irq_lvmask);
-}
-EXPORT_SYMBOL(__ipipe_enable_irqdesc);
-
-void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
-{
-	int prio = __ipipe_get_irq_priority(irq);
-
-	if (ipd != &ipipe_root &&
-	    atomic_dec_and_test(&__ipipe_irq_lvdepth[prio]))
-		__clear_bit(prio, &__ipipe_irq_lvmask);
-}
-EXPORT_SYMBOL(__ipipe_disable_irqdesc);
-
-asmlinkage int __ipipe_syscall_root(struct pt_regs *regs)
-{
-	struct ipipe_percpu_domain_data *p;
-	void (*hook)(void);
-	int ret;
-
-	WARN_ON_ONCE(irqs_disabled_hw());
-
-	/*
-	 * We need to run the IRQ tail hook each time we intercept a
-	 * syscall, because we know that important operations might be
-	 * pending there (e.g. Xenomai deferred rescheduling).
-	 */
-	hook = (__typeof__(hook))__ipipe_irq_tail_hook;
-	hook();
-
-	/*
-	 * This routine either returns:
-	 * 0 -- if the syscall is to be passed to Linux;
-	 * >0 -- if the syscall should not be passed to Linux, and no
-	 * tail work should be performed;
-	 * <0 -- if the syscall should not be passed to Linux but the
-	 * tail work has to be performed (for handling signals etc).
-	 */
-
-	if (!__ipipe_syscall_watched_p(current, regs->orig_p0) ||
-	    !__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
-		return 0;
-
-	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
-
-	hard_local_irq_disable();
-
-	/*
-	 * This is the end of the syscall path, so we may
-	 * safely assume a valid Linux task stack here.
-	 */
-	if (current->ipipe_flags & PF_EVTRET) {
-		current->ipipe_flags &= ~PF_EVTRET;
-		__ipipe_dispatch_event(IPIPE_EVENT_RETURN, regs);
-	}
-
-	if (!__ipipe_root_domain_p)
-		ret = -1;
-	else {
-		p = ipipe_root_cpudom_ptr();
-		if (__ipipe_ipending_p(p))
-			__ipipe_sync_pipeline();
-	}
-
-	hard_local_irq_enable();
-
-	return -ret;
-}
-
-static void __ipipe_no_irqtail(void)
-{
-}
-
-int ipipe_get_sysinfo(struct ipipe_sysinfo *info)
-{
-	info->sys_nr_cpus = num_online_cpus();
-	info->sys_cpu_freq = ipipe_cpu_freq();
-	info->sys_hrtimer_irq = IPIPE_TIMER_IRQ;
-	info->sys_hrtimer_freq = __ipipe_core_clock;
-	info->sys_hrclock_freq = __ipipe_core_clock;
-
-	return 0;
-}
-
-/*
- * ipipe_trigger_irq() -- Push the interrupt at front of the pipeline
- * just like if it has been actually received from a hw source. Also
- * works for virtual interrupts.
- */
-int ipipe_trigger_irq(unsigned irq)
-{
-	unsigned long flags;
-
-#ifdef CONFIG_IPIPE_DEBUG
-	if (irq >= IPIPE_NR_IRQS ||
-	    (ipipe_virtual_irq_p(irq)
-	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
-		return -EINVAL;
-#endif
-
-	flags = hard_local_irq_save();
-	__ipipe_handle_irq(irq, NULL);
-	hard_local_irq_restore(flags);
-
-	return 1;
-}
-
-asmlinkage void __ipipe_sync_root(void)
-{
-	void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
-	struct ipipe_percpu_domain_data *p;
-	unsigned long flags;
-
-	BUG_ON(irqs_disabled());
-
-	flags = hard_local_irq_save();
-
-	if (irq_tail_hook)
-		irq_tail_hook();
-
-	clear_thread_flag(TIF_IRQ_SYNC);
-
-	p = ipipe_root_cpudom_ptr();
-	if (__ipipe_ipending_p(p))
-		__ipipe_sync_pipeline();
-
-	hard_local_irq_restore(flags);
-}
-
-void ___ipipe_sync_pipeline(void)
-{
-	if (__ipipe_root_domain_p &&
-	    test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
-		return;
-
-	__ipipe_sync_stage();
-}
-
-void __ipipe_disable_root_irqs_hw(void)
-{
-	/*
-	 * This code is called by the ins{bwl} routines (see
-	 * arch/blackfin/lib/ins.S), which are heavily used by the
-	 * network stack. It masks all interrupts but those handled by
-	 * non-root domains, so that we keep decent network transfer
-	 * rates for Linux without inducing pathological jitter for
-	 * the real-time domain.
-	 */
-	bfin_sti(__ipipe_irq_lvmask);
-	__set_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
-}
-
-void __ipipe_enable_root_irqs_hw(void)
-{
-	__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
-	bfin_sti(bfin_irq_flags);
-}
-
-/*
- * We could use standard atomic bitops in the following root status
- * manipulation routines, but let's prepare for SMP support in the
- * same move, preventing CPU migration as required.
- */
-void __ipipe_stall_root(void)
-{
-	unsigned long *p, flags;
-
-	flags = hard_local_irq_save();
-	p = &__ipipe_root_status;
-	__set_bit(IPIPE_STALL_FLAG, p);
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__ipipe_stall_root);
-
-unsigned long __ipipe_test_and_stall_root(void)
-{
-	unsigned long *p, flags;
-	int x;
-
-	flags = hard_local_irq_save();
-	p = &__ipipe_root_status;
-	x = __test_and_set_bit(IPIPE_STALL_FLAG, p);
-	hard_local_irq_restore(flags);
-
-	return x;
-}
-EXPORT_SYMBOL(__ipipe_test_and_stall_root);
-
-unsigned long __ipipe_test_root(void)
-{
-	const unsigned long *p;
-	unsigned long flags;
-	int x;
-
-	flags = hard_local_irq_save_smp();
-	p = &__ipipe_root_status;
-	x = test_bit(IPIPE_STALL_FLAG, p);
-	hard_local_irq_restore_smp(flags);
-
-	return x;
-}
-EXPORT_SYMBOL(__ipipe_test_root);
-
-void __ipipe_lock_root(void)
-{
-	unsigned long *p, flags;
-
-	flags = hard_local_irq_save();
-	p = &__ipipe_root_status;
-	__set_bit(IPIPE_SYNCDEFER_FLAG, p);
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__ipipe_lock_root);
-
-void __ipipe_unlock_root(void)
-{
-	unsigned long *p, flags;
-
-	flags = hard_local_irq_save();
-	p = &__ipipe_root_status;
-	__clear_bit(IPIPE_SYNCDEFER_FLAG, p);
-	hard_local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__ipipe_unlock_root);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
deleted file mode 100644
index 052cde5ed2e4..000000000000
--- a/arch/blackfin/kernel/irqchip.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-#include <linux/kallsyms.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <asm/irq_handler.h>
-#include <asm/trace.h>
-#include <asm/pda.h>
-
-static atomic_t irq_err_count;
-void ack_bad_irq(unsigned int irq)
-{
-	atomic_inc(&irq_err_count);
-	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
-}
-
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __RAW_SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating a variable-sized bad_irq_desc.affinity */
-#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
-#ifdef CONFIG_PROC_FS
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
-	int j;
-
-	seq_printf(p, "%*s: ", prec, "NMI");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
-	seq_printf(p, "  CORE  Non Maskable Interrupt\n");
-	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-static void check_stack_overflow(int irq)
-{
-	/* Debugging check for stack overflow: is there less than STACK_WARN free? */
-	long sp = __get_SP() & (THREAD_SIZE - 1);
-
-	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-		dump_stack();
-		pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
-			irq, sp - sizeof(struct thread_info));
-	}
-}
-#else
-static inline void check_stack_overflow(int irq) { }
-#endif
-
-#ifndef CONFIG_IPIPE
-static void maybe_lower_to_irq14(void)
-{
-	unsigned short pending, other_ints;
-
-	/*
-	 * If we're the only interrupt running (ignoring IRQ15 which
-	 * is for syscalls), lower our priority to IRQ14 so that
-	 * softirqs run at that level.  If there's another,
-	 * lower-level interrupt, irq_exit will defer softirqs to
-	 * that. If the interrupt pipeline is enabled, we are already
-	 * running at IRQ14 priority, so we don't need this code.
-	 */
-	CSYNC();
-	pending = bfin_read_IPEND() & ~0x8000;
-	other_ints = pending & (pending - 1);
-	if (other_ints == 0)
-		lower_to_irq14();
-}
-#else
-static inline void maybe_lower_to_irq14(void) { }
-#endif
-
-/*
- * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	check_stack_overflow(irq);
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(&bad_irq_desc);
-	else
-		generic_handle_irq(irq);
-
-	maybe_lower_to_irq14();
-
-	irq_exit();
-
-	set_irq_regs(old_regs);
-}
-
-void __init init_IRQ(void)
-{
-	init_arch_irq();
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	/* Now that evt_ivhw is set up, turn this on */
-	trace_buff_offset = 0;
-	bfin_write_TBUFCTL(BFIN_TRACE_ON);
-	printk(KERN_INFO "Hardware Trace expanded to %ik\n",
-	  1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN);
-#endif
-}
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
deleted file mode 100644
index cf773f0f1f30..000000000000
--- a/arch/blackfin/kernel/kgdb.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * arch/blackfin/kernel/kgdb.c - Blackfin kgdb pieces
- *
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/ptrace.h>		/* for linux pt_regs struct */
-#include <linux/kgdb.h>
-#include <linux/uaccess.h>
-#include <asm/irq_regs.h>
-
-void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
-{
-	gdb_regs[BFIN_R0] = regs->r0;
-	gdb_regs[BFIN_R1] = regs->r1;
-	gdb_regs[BFIN_R2] = regs->r2;
-	gdb_regs[BFIN_R3] = regs->r3;
-	gdb_regs[BFIN_R4] = regs->r4;
-	gdb_regs[BFIN_R5] = regs->r5;
-	gdb_regs[BFIN_R6] = regs->r6;
-	gdb_regs[BFIN_R7] = regs->r7;
-	gdb_regs[BFIN_P0] = regs->p0;
-	gdb_regs[BFIN_P1] = regs->p1;
-	gdb_regs[BFIN_P2] = regs->p2;
-	gdb_regs[BFIN_P3] = regs->p3;
-	gdb_regs[BFIN_P4] = regs->p4;
-	gdb_regs[BFIN_P5] = regs->p5;
-	gdb_regs[BFIN_SP] = regs->reserved;
-	gdb_regs[BFIN_FP] = regs->fp;
-	gdb_regs[BFIN_I0] = regs->i0;
-	gdb_regs[BFIN_I1] = regs->i1;
-	gdb_regs[BFIN_I2] = regs->i2;
-	gdb_regs[BFIN_I3] = regs->i3;
-	gdb_regs[BFIN_M0] = regs->m0;
-	gdb_regs[BFIN_M1] = regs->m1;
-	gdb_regs[BFIN_M2] = regs->m2;
-	gdb_regs[BFIN_M3] = regs->m3;
-	gdb_regs[BFIN_B0] = regs->b0;
-	gdb_regs[BFIN_B1] = regs->b1;
-	gdb_regs[BFIN_B2] = regs->b2;
-	gdb_regs[BFIN_B3] = regs->b3;
-	gdb_regs[BFIN_L0] = regs->l0;
-	gdb_regs[BFIN_L1] = regs->l1;
-	gdb_regs[BFIN_L2] = regs->l2;
-	gdb_regs[BFIN_L3] = regs->l3;
-	gdb_regs[BFIN_A0_DOT_X] = regs->a0x;
-	gdb_regs[BFIN_A0_DOT_W] = regs->a0w;
-	gdb_regs[BFIN_A1_DOT_X] = regs->a1x;
-	gdb_regs[BFIN_A1_DOT_W] = regs->a1w;
-	gdb_regs[BFIN_ASTAT] = regs->astat;
-	gdb_regs[BFIN_RETS] = regs->rets;
-	gdb_regs[BFIN_LC0] = regs->lc0;
-	gdb_regs[BFIN_LT0] = regs->lt0;
-	gdb_regs[BFIN_LB0] = regs->lb0;
-	gdb_regs[BFIN_LC1] = regs->lc1;
-	gdb_regs[BFIN_LT1] = regs->lt1;
-	gdb_regs[BFIN_LB1] = regs->lb1;
-	gdb_regs[BFIN_CYCLES] = 0;
-	gdb_regs[BFIN_CYCLES2] = 0;
-	gdb_regs[BFIN_USP] = regs->usp;
-	gdb_regs[BFIN_SEQSTAT] = regs->seqstat;
-	gdb_regs[BFIN_SYSCFG] = regs->syscfg;
-	gdb_regs[BFIN_RETI] = regs->pc;
-	gdb_regs[BFIN_RETX] = regs->retx;
-	gdb_regs[BFIN_RETN] = regs->retn;
-	gdb_regs[BFIN_RETE] = regs->rete;
-	gdb_regs[BFIN_PC] = regs->pc;
-	gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
-	gdb_regs[BFIN_EXTRA1] = 0;
-	gdb_regs[BFIN_EXTRA2] = 0;
-	gdb_regs[BFIN_EXTRA3] = 0;
-	gdb_regs[BFIN_IPEND] = regs->ipend;
-}
-
-/*
- * Extracts ebp, esp and eip values understandable by gdb from the values
- * saved by switch_to.
- * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
- * prior to entering switch_to is 8 greater than the value that is saved.
- * If switch_to changes, change following code appropriately.
- */
-void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
-{
-	gdb_regs[BFIN_SP] = p->thread.ksp;
-	gdb_regs[BFIN_PC] = p->thread.pc;
-	gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
-}
-
-void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
-{
-	regs->r0 = gdb_regs[BFIN_R0];
-	regs->r1 = gdb_regs[BFIN_R1];
-	regs->r2 = gdb_regs[BFIN_R2];
-	regs->r3 = gdb_regs[BFIN_R3];
-	regs->r4 = gdb_regs[BFIN_R4];
-	regs->r5 = gdb_regs[BFIN_R5];
-	regs->r6 = gdb_regs[BFIN_R6];
-	regs->r7 = gdb_regs[BFIN_R7];
-	regs->p0 = gdb_regs[BFIN_P0];
-	regs->p1 = gdb_regs[BFIN_P1];
-	regs->p2 = gdb_regs[BFIN_P2];
-	regs->p3 = gdb_regs[BFIN_P3];
-	regs->p4 = gdb_regs[BFIN_P4];
-	regs->p5 = gdb_regs[BFIN_P5];
-	regs->fp = gdb_regs[BFIN_FP];
-	regs->i0 = gdb_regs[BFIN_I0];
-	regs->i1 = gdb_regs[BFIN_I1];
-	regs->i2 = gdb_regs[BFIN_I2];
-	regs->i3 = gdb_regs[BFIN_I3];
-	regs->m0 = gdb_regs[BFIN_M0];
-	regs->m1 = gdb_regs[BFIN_M1];
-	regs->m2 = gdb_regs[BFIN_M2];
-	regs->m3 = gdb_regs[BFIN_M3];
-	regs->b0 = gdb_regs[BFIN_B0];
-	regs->b1 = gdb_regs[BFIN_B1];
-	regs->b2 = gdb_regs[BFIN_B2];
-	regs->b3 = gdb_regs[BFIN_B3];
-	regs->l0 = gdb_regs[BFIN_L0];
-	regs->l1 = gdb_regs[BFIN_L1];
-	regs->l2 = gdb_regs[BFIN_L2];
-	regs->l3 = gdb_regs[BFIN_L3];
-	regs->a0x = gdb_regs[BFIN_A0_DOT_X];
-	regs->a0w = gdb_regs[BFIN_A0_DOT_W];
-	regs->a1x = gdb_regs[BFIN_A1_DOT_X];
-	regs->a1w = gdb_regs[BFIN_A1_DOT_W];
-	regs->rets = gdb_regs[BFIN_RETS];
-	regs->lc0 = gdb_regs[BFIN_LC0];
-	regs->lt0 = gdb_regs[BFIN_LT0];
-	regs->lb0 = gdb_regs[BFIN_LB0];
-	regs->lc1 = gdb_regs[BFIN_LC1];
-	regs->lt1 = gdb_regs[BFIN_LT1];
-	regs->lb1 = gdb_regs[BFIN_LB1];
-	regs->usp = gdb_regs[BFIN_USP];
-	regs->syscfg = gdb_regs[BFIN_SYSCFG];
-	regs->retx = gdb_regs[BFIN_RETX];
-	regs->retn = gdb_regs[BFIN_RETN];
-	regs->rete = gdb_regs[BFIN_RETE];
-	regs->pc = gdb_regs[BFIN_PC];
-
-#if 0				/* can't change these */
-	regs->astat = gdb_regs[BFIN_ASTAT];
-	regs->seqstat = gdb_regs[BFIN_SEQSTAT];
-	regs->ipend = gdb_regs[BFIN_IPEND];
-#endif
-}
-
-static struct hw_breakpoint {
-	unsigned int occupied:1;
-	unsigned int skip:1;
-	unsigned int enabled:1;
-	unsigned int type:1;
-	unsigned int dataacc:2;
-	unsigned short count;
-	unsigned int addr;
-} breakinfo[HW_WATCHPOINT_NUM];
-
-static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
-{
-	int breakno;
-	int bfin_type;
-	int dataacc = 0;
-
-	switch (type) {
-	case BP_HARDWARE_BREAKPOINT:
-		bfin_type = TYPE_INST_WATCHPOINT;
-		break;
-	case BP_WRITE_WATCHPOINT:
-		dataacc = 1;
-		bfin_type = TYPE_DATA_WATCHPOINT;
-		break;
-	case BP_READ_WATCHPOINT:
-		dataacc = 2;
-		bfin_type = TYPE_DATA_WATCHPOINT;
-		break;
-	case BP_ACCESS_WATCHPOINT:
-		dataacc = 3;
-		bfin_type = TYPE_DATA_WATCHPOINT;
-		break;
-	default:
-		return -ENOSPC;
-	}
-
-	/* Because hardware data watchpoint impelemented in current
-	 * Blackfin can not trigger an exception event as the hardware
-	 * instrction watchpoint does, we ignaore all data watch point here.
-	 * They can be turned on easily after future blackfin design
-	 * supports this feature.
-	 */
-	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
-		if (bfin_type == breakinfo[breakno].type
-			&& !breakinfo[breakno].occupied) {
-			breakinfo[breakno].occupied = 1;
-			breakinfo[breakno].skip = 0;
-			breakinfo[breakno].enabled = 1;
-			breakinfo[breakno].addr = addr;
-			breakinfo[breakno].dataacc = dataacc;
-			breakinfo[breakno].count = 0;
-			return 0;
-		}
-
-	return -ENOSPC;
-}
-
-static int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
-{
-	int breakno;
-	int bfin_type;
-
-	switch (type) {
-	case BP_HARDWARE_BREAKPOINT:
-		bfin_type = TYPE_INST_WATCHPOINT;
-		break;
-	case BP_WRITE_WATCHPOINT:
-	case BP_READ_WATCHPOINT:
-	case BP_ACCESS_WATCHPOINT:
-		bfin_type = TYPE_DATA_WATCHPOINT;
-		break;
-	default:
-		return 0;
-	}
-	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
-		if (bfin_type == breakinfo[breakno].type
-			&& breakinfo[breakno].occupied
-			&& breakinfo[breakno].addr == addr) {
-			breakinfo[breakno].occupied = 0;
-			breakinfo[breakno].enabled = 0;
-		}
-
-	return 0;
-}
-
-static void bfin_remove_all_hw_break(void)
-{
-	int breakno;
-
-	memset(breakinfo, 0, sizeof(struct hw_breakpoint)*HW_WATCHPOINT_NUM);
-
-	for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
-		breakinfo[breakno].type = TYPE_INST_WATCHPOINT;
-	for (; breakno < HW_WATCHPOINT_NUM; breakno++)
-		breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
-}
-
-static void bfin_correct_hw_break(void)
-{
-	int breakno;
-	unsigned int wpiactl = 0;
-	unsigned int wpdactl = 0;
-	int enable_wp = 0;
-
-	for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
-		if (breakinfo[breakno].enabled) {
-			enable_wp = 1;
-
-			switch (breakno) {
-			case 0:
-				wpiactl |= WPIAEN0|WPICNTEN0;
-				bfin_write_WPIA0(breakinfo[breakno].addr);
-				bfin_write_WPIACNT0(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 1:
-				wpiactl |= WPIAEN1|WPICNTEN1;
-				bfin_write_WPIA1(breakinfo[breakno].addr);
-				bfin_write_WPIACNT1(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 2:
-				wpiactl |= WPIAEN2|WPICNTEN2;
-				bfin_write_WPIA2(breakinfo[breakno].addr);
-				bfin_write_WPIACNT2(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 3:
-				wpiactl |= WPIAEN3|WPICNTEN3;
-				bfin_write_WPIA3(breakinfo[breakno].addr);
-				bfin_write_WPIACNT3(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 4:
-				wpiactl |= WPIAEN4|WPICNTEN4;
-				bfin_write_WPIA4(breakinfo[breakno].addr);
-				bfin_write_WPIACNT4(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 5:
-				wpiactl |= WPIAEN5|WPICNTEN5;
-				bfin_write_WPIA5(breakinfo[breakno].addr);
-				bfin_write_WPIACNT5(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 6:
-				wpdactl |= WPDAEN0|WPDCNTEN0|WPDSRC0;
-				wpdactl |= breakinfo[breakno].dataacc
-					<< WPDACC0_OFFSET;
-				bfin_write_WPDA0(breakinfo[breakno].addr);
-				bfin_write_WPDACNT0(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			case 7:
-				wpdactl |= WPDAEN1|WPDCNTEN1|WPDSRC1;
-				wpdactl |= breakinfo[breakno].dataacc
-					<< WPDACC1_OFFSET;
-				bfin_write_WPDA1(breakinfo[breakno].addr);
-				bfin_write_WPDACNT1(breakinfo[breakno].count
-					+ breakinfo->skip);
-				break;
-			}
-		}
-
-	/* Should enable WPPWR bit first before set any other
-	 * WPIACTL and WPDACTL bits */
-	if (enable_wp) {
-		bfin_write_WPIACTL(WPPWR);
-		CSYNC();
-		bfin_write_WPIACTL(wpiactl|WPPWR);
-		bfin_write_WPDACTL(wpdactl);
-		CSYNC();
-	}
-}
-
-static void bfin_disable_hw_debug(struct pt_regs *regs)
-{
-	/* Disable hardware debugging while we are in kgdb */
-	bfin_write_WPIACTL(0);
-	bfin_write_WPDACTL(0);
-	CSYNC();
-}
-
-#ifdef CONFIG_SMP
-void kgdb_passive_cpu_callback(void *info)
-{
-	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
-}
-
-void kgdb_roundup_cpus(unsigned long flags)
-{
-	unsigned int cpu;
-
-	for (cpu = cpumask_first(cpu_online_mask); cpu < nr_cpu_ids;
-		cpu = cpumask_next(cpu, cpu_online_mask))
-		smp_call_function_single(cpu, kgdb_passive_cpu_callback,
-					 NULL, 0);
-}
-
-void kgdb_roundup_cpu(int cpu, unsigned long flags)
-{
-	smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0);
-}
-#endif
-
-#ifdef CONFIG_IPIPE
-static unsigned long kgdb_arch_imask;
-#endif
-
-int kgdb_arch_handle_exception(int vector, int signo,
-			       int err_code, char *remcom_in_buffer,
-			       char *remcom_out_buffer,
-			       struct pt_regs *regs)
-{
-	long addr;
-	char *ptr;
-	int newPC;
-	int i;
-
-	switch (remcom_in_buffer[0]) {
-	case 'c':
-	case 's':
-		if (kgdb_contthread && kgdb_contthread != current) {
-			strcpy(remcom_out_buffer, "E00");
-			break;
-		}
-
-		kgdb_contthread = NULL;
-
-		/* try to read optional parameter, pc unchanged if no parm */
-		ptr = &remcom_in_buffer[1];
-		if (kgdb_hex2long(&ptr, &addr)) {
-			regs->retx = addr;
-		}
-		newPC = regs->retx;
-
-		/* clear the trace bit */
-		regs->syscfg &= 0xfffffffe;
-
-		/* set the trace bit if we're stepping */
-		if (remcom_in_buffer[0] == 's') {
-			regs->syscfg |= 0x1;
-			kgdb_single_step = regs->ipend;
-			kgdb_single_step >>= 6;
-			for (i = 10; i > 0; i--, kgdb_single_step >>= 1)
-				if (kgdb_single_step & 1)
-					break;
-			/* i indicate event priority of current stopped instruction
-			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
-			 * kgdb_single_step > 0 means in single step mode
-			 */
-			kgdb_single_step = i + 1;
-
-			preempt_disable();
-#ifdef CONFIG_IPIPE
-			kgdb_arch_imask = cpu_pda[raw_smp_processor_id()].ex_imask;
-			cpu_pda[raw_smp_processor_id()].ex_imask = 0;
-#endif
-		}
-
-		bfin_correct_hw_break();
-
-		return 0;
-	}			/* switch */
-	return -1;		/* this means that we do not want to exit from the handler */
-}
-
-struct kgdb_arch arch_kgdb_ops = {
-	.gdb_bpt_instr = {0xa1},
-	.flags = KGDB_HW_BREAKPOINT,
-	.set_hw_breakpoint = bfin_set_hw_break,
-	.remove_hw_breakpoint = bfin_remove_hw_break,
-	.disable_hw_break = bfin_disable_hw_debug,
-	.remove_all_hw_break = bfin_remove_all_hw_break,
-	.correct_hw_break = bfin_correct_hw_break,
-};
-
-#define IN_MEM(addr, size, l1_addr, l1_size) \
-({ \
-	unsigned long __addr = (unsigned long)(addr); \
-	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
-})
-#define ASYNC_BANK_SIZE \
-	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
-	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
-
-int kgdb_validate_break_address(unsigned long addr)
-{
-	int cpu = raw_smp_processor_id();
-
-	if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end)
-		return 0;
-	if (IN_MEM(addr, BREAK_INSTR_SIZE, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
-		return 0;
-	if (cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
-		return 0;
-#ifdef CONFIG_SMP
-	else if (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
-		return 0;
-#endif
-	if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
-		return 0;
-
-	return -EFAULT;
-}
-
-void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
-{
-	regs->retx = ip;
-}
-
-int kgdb_arch_init(void)
-{
-	kgdb_single_step = 0;
-#ifdef CONFIG_IPIPE
-	kgdb_arch_imask = 0;
-#endif
-
-	bfin_remove_all_hw_break();
-	return 0;
-}
-
-void kgdb_arch_exit(void)
-{
-}
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
deleted file mode 100644
index b8b785dc4e3b..000000000000
--- a/arch/blackfin/kernel/kgdb_test.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/blackfin/kernel/kgdb_test.c - Blackfin kgdb tests
- *
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-
-#include <asm/current.h>
-#include <linux/uaccess.h>
-
-#include <asm/blackfin.h>
-
-/* Symbols are here for kgdb test to poke directly */
-static char cmdline[256];
-static size_t len;
-
-#ifndef CONFIG_SMP
-static int num1 __attribute__((l1_data));
-
-void kgdb_l1_test(void) __attribute__((l1_text));
-
-void kgdb_l1_test(void)
-{
-	pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
-	pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test);
-	num1 = num1 + 10;
-	pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
-}
-#endif
-
-#if L2_LENGTH
-
-static int num2 __attribute__((l2));
-void kgdb_l2_test(void) __attribute__((l2));
-
-void kgdb_l2_test(void)
-{
-	pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
-	pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test);
-	num2 = num2 + 20;
-	pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
-}
-
-#endif
-
-noinline int kgdb_test(char *name, int len, int count, int z)
-{
-	pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z);
-	count = z;
-	return count;
-}
-
-static ssize_t
-kgdb_test_proc_read(struct file *file, char __user *buf,
-                    size_t count, loff_t *ppos)
-{
-	kgdb_test("hello world!", 12, 0x55, 0x10);
-#ifndef CONFIG_SMP
-	kgdb_l1_test();
-#endif
-#if L2_LENGTH
-	kgdb_l2_test();
-#endif
-
-	return 0;
-}
-
-static ssize_t
-kgdb_test_proc_write(struct file *file, const char __user *buffer,
-                     size_t count, loff_t *pos)
-{
-	len = min_t(size_t, 255, count);
-	memcpy(cmdline, buffer, count);
-	cmdline[len] = 0;
-
-	return len;
-}
-
-static const struct file_operations kgdb_test_proc_fops = {
-	.owner = THIS_MODULE,
-	.read  = kgdb_test_proc_read,
-	.write = kgdb_test_proc_write,
-	.llseek = noop_llseek,
-};
-
-static int __init kgdbtest_init(void)
-{
-	struct proc_dir_entry *entry;
-
-#if L2_LENGTH
-	num2 = 0;
-#endif
-
-	entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops);
-	if (entry == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-
-static void __exit kgdbtest_exit(void)
-{
-	remove_proc_entry("kgdbtest", NULL);
-}
-
-module_init(kgdbtest_init);
-module_exit(kgdbtest_exit);
-MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
deleted file mode 100644
index 15af5768c403..000000000000
--- a/arch/blackfin/kernel/module.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/dma.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-
-#define mod_err(mod, fmt, ...)						\
-	pr_err("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
-#define mod_debug(mod, fmt, ...)					\
-	pr_debug("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
-
-/* Transfer the section to the L1 memory */
-int
-module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-			  char *secstrings, struct module *mod)
-{
-	/*
-	 * XXX: sechdrs are vmalloced in kernel/module.c
-	 * and would be vfreed just after module is loaded,
-	 * so we hack to keep the only information we needed
-	 * in mod->arch to correctly free L1 I/D sram later.
-	 * NOTE: this breaks the semantic of mod->arch structure.
-	 */
-	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
-	void *dest;
-
-	for (s = sechdrs; s < sechdrs_end; ++s) {
-		const char *shname = secstrings + s->sh_name;
-
-		if (s->sh_size == 0)
-			continue;
-
-		if (!strcmp(".l1.text", shname) ||
-		    (!strcmp(".text", shname) &&
-		     (hdr->e_flags & EF_BFIN_CODE_IN_L1))) {
-
-			dest = l1_inst_sram_alloc(s->sh_size);
-			mod->arch.text_l1 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L1 inst memory allocation failed\n");
-				return -1;
-			}
-			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
-
-		} else if (!strcmp(".l1.data", shname) ||
-		           (!strcmp(".data", shname) &&
-		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
-
-			dest = l1_data_sram_alloc(s->sh_size);
-			mod->arch.data_a_l1 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L1 data memory allocation failed\n");
-				return -1;
-			}
-			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-
-		} else if (!strcmp(".l1.bss", shname) ||
-		           (!strcmp(".bss", shname) &&
-		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
-
-			dest = l1_data_sram_zalloc(s->sh_size);
-			mod->arch.bss_a_l1 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L1 data memory allocation failed\n");
-				return -1;
-			}
-
-		} else if (!strcmp(".l1.data.B", shname)) {
-
-			dest = l1_data_B_sram_alloc(s->sh_size);
-			mod->arch.data_b_l1 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L1 data memory allocation failed\n");
-				return -1;
-			}
-			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-
-		} else if (!strcmp(".l1.bss.B", shname)) {
-
-			dest = l1_data_B_sram_alloc(s->sh_size);
-			mod->arch.bss_b_l1 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L1 data memory allocation failed\n");
-				return -1;
-			}
-			memset(dest, 0, s->sh_size);
-
-		} else if (!strcmp(".l2.text", shname) ||
-		           (!strcmp(".text", shname) &&
-		            (hdr->e_flags & EF_BFIN_CODE_IN_L2))) {
-
-			dest = l2_sram_alloc(s->sh_size);
-			mod->arch.text_l2 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L2 SRAM allocation failed\n");
-				return -1;
-			}
-			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-
-		} else if (!strcmp(".l2.data", shname) ||
-		           (!strcmp(".data", shname) &&
-		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
-
-			dest = l2_sram_alloc(s->sh_size);
-			mod->arch.data_l2 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L2 SRAM allocation failed\n");
-				return -1;
-			}
-			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-
-		} else if (!strcmp(".l2.bss", shname) ||
-		           (!strcmp(".bss", shname) &&
-		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
-
-			dest = l2_sram_zalloc(s->sh_size);
-			mod->arch.bss_l2 = dest;
-			if (dest == NULL) {
-				mod_err(mod, "L2 SRAM allocation failed\n");
-				return -1;
-			}
-
-		} else
-			continue;
-
-		s->sh_flags &= ~SHF_ALLOC;
-		s->sh_addr = (unsigned long)dest;
-	}
-
-	return 0;
-}
-
-/*************************************************************************/
-/* FUNCTION : apply_relocate_add                                         */
-/* ABSTRACT : Blackfin specific relocation handling for the loadable     */
-/*            modules. Modules are expected to be .o files.              */
-/*            Arithmetic relocations are handled.                        */
-/*            We do not expect LSETUP to be split and hence is not       */
-/*            handled.                                                   */
-/*            R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the   */
-/*            gas does not generate it.                                  */
-/*************************************************************************/
-int
-apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
-		   unsigned int symindex, unsigned int relsec,
-		   struct module *mod)
-{
-	unsigned int i;
-	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	unsigned long location, value, size;
-
-	mod_debug(mod, "applying relocate section %u to %u\n",
-		  relsec, sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = sechdrs[sechdrs[relsec].sh_info].sh_addr +
-		           rel[i].r_offset;
-
-		/* This is the symbol it is referring to. Note that all
-		   undefined symbols have been resolved. */
-		sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
-		    + ELF32_R_SYM(rel[i].r_info);
-		value = sym->st_value;
-		value += rel[i].r_addend;
-
-#ifdef CONFIG_SMP
-		if (location >= COREB_L1_DATA_A_START) {
-			mod_err(mod, "cannot relocate in L1: %u (SMP kernel)\n",
-				ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-#endif
-
-		mod_debug(mod, "location is %lx, value is %lx type is %d\n",
-			  location, value, ELF32_R_TYPE(rel[i].r_info));
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-
-		case R_BFIN_HUIMM16:
-			value >>= 16;
-		case R_BFIN_LUIMM16:
-		case R_BFIN_RIMM16:
-			size = 2;
-			break;
-		case R_BFIN_BYTE4_DATA:
-			size = 4;
-			break;
-
-		case R_BFIN_PCREL24:
-		case R_BFIN_PCREL24_JUMP_L:
-		case R_BFIN_PCREL12_JUMP:
-		case R_BFIN_PCREL12_JUMP_S:
-		case R_BFIN_PCREL10:
-			mod_err(mod, "unsupported relocation: %u (no -mlong-calls?)\n",
-				ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-
-		default:
-			mod_err(mod, "unknown relocation: %u\n",
-				ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-
-		switch (bfin_mem_access_type(location, size)) {
-		case BFIN_MEM_ACCESS_CORE:
-		case BFIN_MEM_ACCESS_CORE_ONLY:
-			memcpy((void *)location, &value, size);
-			break;
-		case BFIN_MEM_ACCESS_DMA:
-			dma_memcpy((void *)location, &value, size);
-			break;
-		case BFIN_MEM_ACCESS_ITEST:
-			isram_memcpy((void *)location, &value, size);
-			break;
-		default:
-			mod_err(mod, "invalid relocation for %#lx\n", location);
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-int
-module_finalize(const Elf_Ehdr * hdr,
-		const Elf_Shdr * sechdrs, struct module *mod)
-{
-	unsigned int i, strindex = 0, symindex = 0;
-	char *secstrings;
-	long err = 0;
-
-	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* Internal symbols and strings. */
-		if (sechdrs[i].sh_type == SHT_SYMTAB) {
-			symindex = i;
-			strindex = sechdrs[i].sh_link;
-		}
-	}
-
-	for (i = 1; i < hdr->e_shnum; i++) {
-		const char *strtab = (char *)sechdrs[strindex].sh_addr;
-		unsigned int info = sechdrs[i].sh_info;
-		const char *shname = secstrings + sechdrs[i].sh_name;
-
-		/* Not a valid relocation section? */
-		if (info >= hdr->e_shnum)
-			continue;
-
-		/* Only support RELA relocation types */
-		if (sechdrs[i].sh_type != SHT_RELA)
-			continue;
-
-		if (!strcmp(".rela.l2.text", shname) ||
-		    !strcmp(".rela.l1.text", shname) ||
-		    (!strcmp(".rela.text", shname) &&
-			 (hdr->e_flags & (EF_BFIN_CODE_IN_L1 | EF_BFIN_CODE_IN_L2)))) {
-
-			err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
-					   symindex, i, mod);
-			if (err < 0)
-				return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	l1_inst_sram_free(mod->arch.text_l1);
-	l1_data_A_sram_free(mod->arch.data_a_l1);
-	l1_data_A_sram_free(mod->arch.bss_a_l1);
-	l1_data_B_sram_free(mod->arch.data_b_l1);
-	l1_data_B_sram_free(mod->arch.bss_b_l1);
-	l2_sram_free(mod->arch.text_l2);
-	l2_sram_free(mod->arch.data_l2);
-	l2_sram_free(mod->arch.bss_l2);
-}
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
deleted file mode 100644
index 8a211d95821f..000000000000
--- a/arch/blackfin/kernel/nmi.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Blackfin nmi_watchdog Driver
- *
- * Originally based on bfin_wdt.c
- * Copyright 2010-2010 Analog Devices Inc.
- *		Graff Yang <graf.yang@analog.com>
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/bitops.h>
-#include <linux/hardirq.h>
-#include <linux/syscore_ops.h>
-#include <linux/pm.h>
-#include <linux/nmi.h>
-#include <linux/smp.h>
-#include <linux/timer.h>
-#include <linux/sched/debug.h>
-#include <asm/blackfin.h>
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/bfin_watchdog.h>
-
-#define DRV_NAME "nmi-wdt"
-
-#define NMI_WDT_TIMEOUT 5          /* 5 seconds */
-#define NMI_CHECK_TIMEOUT (4 * HZ) /* 4 seconds in jiffies */
-static int nmi_wdt_cpu = 1;
-
-static unsigned int timeout = NMI_WDT_TIMEOUT;
-static int nmi_active;
-
-static unsigned short wdoga_ctl;
-static unsigned int wdoga_cnt;
-static struct corelock_slot saved_corelock;
-static atomic_t nmi_touched[NR_CPUS];
-static struct timer_list ntimer;
-
-enum {
-	COREA_ENTER_NMI = 0,
-	COREA_EXIT_NMI,
-	COREB_EXIT_NMI,
-
-	NMI_EVENT_NR,
-};
-static unsigned long nmi_event __attribute__ ((__section__(".l2.bss")));
-
-/* we are in nmi, non-atomic bit ops is safe */
-static inline void set_nmi_event(int event)
-{
-	__set_bit(event, &nmi_event);
-}
-
-static inline void wait_nmi_event(int event)
-{
-	while (!test_bit(event, &nmi_event))
-		barrier();
-	__clear_bit(event, &nmi_event);
-}
-
-static inline void send_corea_nmi(void)
-{
-	wdoga_ctl = bfin_read_WDOGA_CTL();
-	wdoga_cnt = bfin_read_WDOGA_CNT();
-
-	bfin_write_WDOGA_CTL(WDEN_DISABLE);
-	bfin_write_WDOGA_CNT(0);
-	bfin_write_WDOGA_CTL(WDEN_ENABLE | ICTL_NMI);
-}
-
-static inline void restore_corea_nmi(void)
-{
-	bfin_write_WDOGA_CTL(WDEN_DISABLE);
-	bfin_write_WDOGA_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
-
-	bfin_write_WDOGA_CNT(wdoga_cnt);
-	bfin_write_WDOGA_CTL(wdoga_ctl);
-}
-
-static inline void save_corelock(void)
-{
-	saved_corelock = corelock;
-	corelock.lock = 0;
-}
-
-static inline void restore_corelock(void)
-{
-	corelock = saved_corelock;
-}
-
-
-static inline void nmi_wdt_keepalive(void)
-{
-	bfin_write_WDOGB_STAT(0);
-}
-
-static inline void nmi_wdt_stop(void)
-{
-	bfin_write_WDOGB_CTL(WDEN_DISABLE);
-}
-
-/* before calling this function, you must stop the WDT */
-static inline void nmi_wdt_clear(void)
-{
-	/* clear TRO bit, disable event generation */
-	bfin_write_WDOGB_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
-}
-
-static inline void nmi_wdt_start(void)
-{
-	bfin_write_WDOGB_CTL(WDEN_ENABLE | ICTL_NMI);
-}
-
-static inline int nmi_wdt_running(void)
-{
-	return ((bfin_read_WDOGB_CTL() & WDEN_MASK) != WDEN_DISABLE);
-}
-
-static inline int nmi_wdt_set_timeout(unsigned long t)
-{
-	u32 cnt, max_t, sclk;
-	int run;
-
-	sclk = get_sclk();
-	max_t = -1 / sclk;
-	cnt = t * sclk;
-	if (t > max_t) {
-		pr_warning("NMI: timeout value is too large\n");
-		return -EINVAL;
-	}
-
-	run = nmi_wdt_running();
-	nmi_wdt_stop();
-	bfin_write_WDOGB_CNT(cnt);
-	if (run)
-		nmi_wdt_start();
-
-	timeout = t;
-
-	return 0;
-}
-
-int check_nmi_wdt_touched(void)
-{
-	unsigned int this_cpu = smp_processor_id();
-	unsigned int cpu;
-	cpumask_t mask;
-
-	cpumask_copy(&mask, cpu_online_mask);
-	if (!atomic_read(&nmi_touched[this_cpu]))
-		return 0;
-
-	atomic_set(&nmi_touched[this_cpu], 0);
-
-	cpumask_clear_cpu(this_cpu, &mask);
-	for_each_cpu(cpu, &mask) {
-		invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]),
-				(unsigned long)(&nmi_touched[cpu]));
-		if (!atomic_read(&nmi_touched[cpu]))
-			return 0;
-		atomic_set(&nmi_touched[cpu], 0);
-	}
-
-	return 1;
-}
-
-static void nmi_wdt_timer(struct timer_list *unused)
-{
-	if (check_nmi_wdt_touched())
-		nmi_wdt_keepalive();
-
-	mod_timer(&ntimer, jiffies + NMI_CHECK_TIMEOUT);
-}
-
-static int __init init_nmi_wdt(void)
-{
-	nmi_wdt_set_timeout(timeout);
-	nmi_wdt_start();
-	nmi_active = true;
-
-	timer_setup(&ntimer, nmi_wdt_timer, 0);
-	ntimer.expires = jiffies + NMI_CHECK_TIMEOUT;
-	add_timer(&ntimer);
-
-	pr_info("nmi_wdt: initialized: timeout=%d sec\n", timeout);
-	return 0;
-}
-device_initcall(init_nmi_wdt);
-
-void arch_touch_nmi_watchdog(void)
-{
-	atomic_set(&nmi_touched[smp_processor_id()], 1);
-}
-
-/* Suspend/resume support */
-#ifdef CONFIG_PM
-static int nmi_wdt_suspend(void)
-{
-	nmi_wdt_stop();
-	return 0;
-}
-
-static void nmi_wdt_resume(void)
-{
-	if (nmi_active)
-		nmi_wdt_start();
-}
-
-static struct syscore_ops nmi_syscore_ops = {
-	.resume		= nmi_wdt_resume,
-	.suspend	= nmi_wdt_suspend,
-};
-
-static int __init init_nmi_wdt_syscore(void)
-{
-	if (nmi_active)
-		register_syscore_ops(&nmi_syscore_ops);
-
-	return 0;
-}
-late_initcall(init_nmi_wdt_syscore);
-
-#endif	/* CONFIG_PM */
-
-
-asmlinkage notrace void do_nmi(struct pt_regs *fp)
-{
-	unsigned int cpu = smp_processor_id();
-	nmi_enter();
-
-	cpu_pda[cpu].__nmi_count += 1;
-
-	if (cpu == nmi_wdt_cpu) {
-		/* CoreB goes here first */
-
-		/* reload the WDOG_STAT */
-		nmi_wdt_keepalive();
-
-		/* clear nmi interrupt for CoreB */
-		nmi_wdt_stop();
-		nmi_wdt_clear();
-
-		/* trigger NMI interrupt of CoreA */
-		send_corea_nmi();
-
-		/* waiting CoreB to enter NMI */
-		wait_nmi_event(COREA_ENTER_NMI);
-
-		/* recover WDOGA's settings */
-		restore_corea_nmi();
-
-		save_corelock();
-
-		/* corelock is save/cleared, CoreA is dummping messages */
-
-		wait_nmi_event(COREA_EXIT_NMI);
-	} else {
-		/* OK, CoreA entered NMI */
-		set_nmi_event(COREA_ENTER_NMI);
-	}
-
-	pr_emerg("\nNMI Watchdog detected LOCKUP, dump for CPU %d\n", cpu);
-	dump_bfin_process(fp);
-	dump_bfin_mem(fp);
-	show_regs(fp);
-	dump_bfin_trace_buffer();
-	show_stack(current, (unsigned long *)fp);
-
-	if (cpu == nmi_wdt_cpu) {
-		pr_emerg("This fault is not recoverable, sorry!\n");
-
-		/* CoreA dump finished, restore the corelock */
-		restore_corelock();
-
-		set_nmi_event(COREB_EXIT_NMI);
-	} else {
-		/* CoreB dump finished, notice the CoreA we are done */
-		set_nmi_event(COREA_EXIT_NMI);
-
-		/* synchronize with CoreA */
-		wait_nmi_event(COREB_EXIT_NMI);
-	}
-
-	nmi_exit();
-}
diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c
deleted file mode 100644
index 6a9524ad04a5..000000000000
--- a/arch/blackfin/kernel/perf_event.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Blackfin performance counters
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Ripped from SuperH version:
- *
- *  Copyright (C) 2009  Paul Mundt
- *
- * Heavily based on the x86 and PowerPC implementations.
- *
- * x86:
- *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- *  Copyright (C) 2009 Jaswinder Singh Rajput
- *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- *
- * ppc:
- *  Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/perf_event.h>
-#include <asm/bfin_pfmon.h>
-
-/*
- * We have two counters, and each counter can support an event type.
- * The 'o' is PFCNTx=1 and 's' is PFCNTx=0
- *
- * 0x04 o pc invariant branches
- * 0x06 o mispredicted branches
- * 0x09 o predicted branches taken
- * 0x0B o EXCPT insn
- * 0x0C o CSYNC/SSYNC insn
- * 0x0D o Insns committed
- * 0x0E o Interrupts taken
- * 0x0F o Misaligned address exceptions
- * 0x80 o Code memory fetches stalled due to DMA
- * 0x83 o 64bit insn fetches delivered
- * 0x9A o data cache fills (bank a)
- * 0x9B o data cache fills (bank b)
- * 0x9C o data cache lines evicted (bank a)
- * 0x9D o data cache lines evicted (bank b)
- * 0x9E o data cache high priority fills
- * 0x9F o data cache low priority fills
- * 0x00 s loop 0 iterations
- * 0x01 s loop 1 iterations
- * 0x0A s CSYNC/SSYNC stalls
- * 0x10 s DAG read/after write hazards
- * 0x13 s RAW data hazards
- * 0x81 s code TAG stalls
- * 0x82 s code fill stalls
- * 0x90 s processor to memory stalls
- * 0x91 s data memory stalls not hidden by 0x90
- * 0x92 s data store buffer full stalls
- * 0x93 s data memory write buffer full stalls due to high->low priority
- * 0x95 s data memory fill buffer stalls
- * 0x96 s data TAG collision stalls
- * 0x97 s data collision stalls
- * 0x98 s data stalls
- * 0x99 s data stalls sent to processor
- */
-
-static const int event_map[] = {
-	/* use CYCLES cpu register */
-	[PERF_COUNT_HW_CPU_CYCLES]          = -1,
-	[PERF_COUNT_HW_INSTRUCTIONS]        = 0x0D,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
-	[PERF_COUNT_HW_CACHE_MISSES]        = 0x83,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x09,
-	[PERF_COUNT_HW_BRANCH_MISSES]       = 0x06,
-	[PERF_COUNT_HW_BUS_CYCLES]          = -1,
-};
-
-#define C(x)	PERF_COUNT_HW_CACHE_##x
-
-static const int cache_events[PERF_COUNT_HW_CACHE_MAX]
-                             [PERF_COUNT_HW_CACHE_OP_MAX]
-                             [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
-	[C(L1D)] = {	/* Data bank A */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = 0,
-			[C(RESULT_MISS)  ] = 0x9A,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = 0,
-			[C(RESULT_MISS)  ] = 0,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = 0,
-			[C(RESULT_MISS)  ] = 0,
-		},
-	},
-
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = 0,
-			[C(RESULT_MISS)  ] = 0x83,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = 0,
-			[C(RESULT_MISS)  ] = 0,
-		},
-	},
-
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-	},
-
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-	},
-
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-	},
-
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = -1,
-			[C(RESULT_MISS)  ] = -1,
-		},
-	},
-};
-
-const char *perf_pmu_name(void)
-{
-	return "bfin";
-}
-EXPORT_SYMBOL(perf_pmu_name);
-
-int perf_num_counters(void)
-{
-	return ARRAY_SIZE(event_map);
-}
-EXPORT_SYMBOL(perf_num_counters);
-
-static u64 bfin_pfmon_read(int idx)
-{
-	return bfin_read32(PFCNTR0 + (idx * 4));
-}
-
-static void bfin_pfmon_disable(struct hw_perf_event *hwc, int idx)
-{
-	bfin_write_PFCTL(bfin_read_PFCTL() & ~PFCEN(idx, PFCEN_MASK));
-}
-
-static void bfin_pfmon_enable(struct hw_perf_event *hwc, int idx)
-{
-	u32 val, mask;
-
-	val = PFPWR;
-	if (idx) {
-		mask = ~(PFCNT1 | PFMON1 | PFCEN1 | PEMUSW1);
-		/* The packed config is for event0, so shift it to event1 slots */
-		val |= (hwc->config << (PFMON1_P - PFMON0_P));
-		val |= (hwc->config & PFCNT0) << (PFCNT1_P - PFCNT0_P);
-		bfin_write_PFCNTR1(0);
-	} else {
-		mask = ~(PFCNT0 | PFMON0 | PFCEN0 | PEMUSW0);
-		val |= hwc->config;
-		bfin_write_PFCNTR0(0);
-	}
-
-	bfin_write_PFCTL((bfin_read_PFCTL() & mask) | val);
-}
-
-static void bfin_pfmon_disable_all(void)
-{
-	bfin_write_PFCTL(bfin_read_PFCTL() & ~PFPWR);
-}
-
-static void bfin_pfmon_enable_all(void)
-{
-	bfin_write_PFCTL(bfin_read_PFCTL() | PFPWR);
-}
-
-struct cpu_hw_events {
-	struct perf_event *events[MAX_HWEVENTS];
-	unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-static int hw_perf_cache_event(int config, int *evp)
-{
-	unsigned long type, op, result;
-	int ev;
-
-	/* unpack config */
-	type = config & 0xff;
-	op = (config >> 8) & 0xff;
-	result = (config >> 16) & 0xff;
-
-	if (type >= PERF_COUNT_HW_CACHE_MAX ||
-	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
-	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	ev = cache_events[type][op][result];
-	if (ev == 0)
-		return -EOPNOTSUPP;
-	if (ev == -1)
-		return -EINVAL;
-	*evp = ev;
-	return 0;
-}
-
-static void bfin_perf_event_update(struct perf_event *event,
-				   struct hw_perf_event *hwc, int idx)
-{
-	u64 prev_raw_count, new_raw_count;
-	s64 delta;
-	int shift = 0;
-
-	/*
-	 * Depending on the counter configuration, they may or may not
-	 * be chained, in which case the previous counter value can be
-	 * updated underneath us if the lower-half overflows.
-	 *
-	 * Our tactic to handle this is to first atomically read and
-	 * exchange a new raw count - then add that new-prev delta
-	 * count to the generic counter atomically.
-	 *
-	 * As there is no interrupt associated with the overflow events,
-	 * this is the simplest approach for maintaining consistency.
-	 */
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = bfin_pfmon_read(idx);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
-
-	/*
-	 * Now we have the new raw value and have updated the prev
-	 * timestamp already. We can now calculate the elapsed delta
-	 * (counter-)time and add that to the generic counter.
-	 *
-	 * Careful, not all hw sign-extends above the physical width
-	 * of the count.
-	 */
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
-
-	local64_add(delta, &event->count);
-}
-
-static void bfin_pmu_stop(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	if (!(event->hw.state & PERF_HES_STOPPED)) {
-		bfin_pfmon_disable(hwc, idx);
-		cpuc->events[idx] = NULL;
-		event->hw.state |= PERF_HES_STOPPED;
-	}
-
-	if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
-		bfin_perf_event_update(event, &event->hw, idx);
-		event->hw.state |= PERF_HES_UPTODATE;
-	}
-}
-
-static void bfin_pmu_start(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	if (WARN_ON_ONCE(idx == -1))
-		return;
-
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
-	cpuc->events[idx] = event;
-	event->hw.state = 0;
-	bfin_pfmon_enable(hwc, idx);
-}
-
-static void bfin_pmu_del(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-
-	bfin_pmu_stop(event, PERF_EF_UPDATE);
-	__clear_bit(event->hw.idx, cpuc->used_mask);
-
-	perf_event_update_userpage(event);
-}
-
-static int bfin_pmu_add(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	int ret = -EAGAIN;
-
-	perf_pmu_disable(event->pmu);
-
-	if (__test_and_set_bit(idx, cpuc->used_mask)) {
-		idx = find_first_zero_bit(cpuc->used_mask, MAX_HWEVENTS);
-		if (idx == MAX_HWEVENTS)
-			goto out;
-
-		__set_bit(idx, cpuc->used_mask);
-		hwc->idx = idx;
-	}
-
-	bfin_pfmon_disable(hwc, idx);
-
-	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
-	if (flags & PERF_EF_START)
-		bfin_pmu_start(event, PERF_EF_RELOAD);
-
-	perf_event_update_userpage(event);
-	ret = 0;
-out:
-	perf_pmu_enable(event->pmu);
-	return ret;
-}
-
-static void bfin_pmu_read(struct perf_event *event)
-{
-	bfin_perf_event_update(event, &event->hw, event->hw.idx);
-}
-
-static int bfin_pmu_event_init(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	struct hw_perf_event *hwc = &event->hw;
-	int config = -1;
-	int ret;
-
-	if (attr->exclude_hv || attr->exclude_idle)
-		return -EPERM;
-
-	ret = 0;
-	switch (attr->type) {
-	case PERF_TYPE_RAW:
-		config = PFMON(0, attr->config & PFMON_MASK) |
-			PFCNT(0, !(attr->config & 0x100));
-		break;
-	case PERF_TYPE_HW_CACHE:
-		ret = hw_perf_cache_event(attr->config, &config);
-		break;
-	case PERF_TYPE_HARDWARE:
-		if (attr->config >= ARRAY_SIZE(event_map))
-			return -EINVAL;
-
-		config = event_map[attr->config];
-		break;
-	}
-
-	if (config == -1)
-		return -EINVAL;
-
-	if (!attr->exclude_kernel)
-		config |= PFCEN(0, PFCEN_ENABLE_SUPV);
-	if (!attr->exclude_user)
-		config |= PFCEN(0, PFCEN_ENABLE_USER);
-
-	hwc->config |= config;
-
-	return ret;
-}
-
-static void bfin_pmu_enable(struct pmu *pmu)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct perf_event *event;
-	struct hw_perf_event *hwc;
-	int i;
-
-	for (i = 0; i < MAX_HWEVENTS; ++i) {
-		event = cpuc->events[i];
-		if (!event)
-			continue;
-		hwc = &event->hw;
-		bfin_pfmon_enable(hwc, hwc->idx);
-	}
-
-	bfin_pfmon_enable_all();
-}
-
-static void bfin_pmu_disable(struct pmu *pmu)
-{
-	bfin_pfmon_disable_all();
-}
-
-static struct pmu pmu = {
-	.pmu_enable  = bfin_pmu_enable,
-	.pmu_disable = bfin_pmu_disable,
-	.event_init  = bfin_pmu_event_init,
-	.add         = bfin_pmu_add,
-	.del         = bfin_pmu_del,
-	.start       = bfin_pmu_start,
-	.stop        = bfin_pmu_stop,
-	.read        = bfin_pmu_read,
-};
-
-static int bfin_pmu_prepare_cpu(unsigned int cpu)
-{
-	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
-
-	bfin_write_PFCTL(0);
-	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
-	return 0;
-}
-
-static int __init bfin_pmu_init(void)
-{
-	int ret;
-
-	/*
-	 * All of the on-chip counters are "limited", in that they have
-	 * no interrupts, and are therefore unable to do sampling without
-	 * further work and timer assistance.
-	 */
-	pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-
-	ret = perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-	if (!ret)
-		cpuhp_setup_state(CPUHP_PERF_BFIN,"perf/bfin:starting",
-				  bfin_pmu_prepare_cpu, NULL);
-	return ret;
-}
-early_initcall(bfin_pmu_init);
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
deleted file mode 100644
index 89814850b08b..000000000000
--- a/arch/blackfin/kernel/process.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * Blackfin architecture-dependent process handling
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/module.h>
-#include <linux/unistd.h>
-#include <linux/user.h>
-#include <linux/uaccess.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm_types.h>
-#include <linux/tick.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-
-#include <asm/blackfin.h>
-#include <asm/fixed_code.h>
-#include <asm/mem_map.h>
-#include <asm/irq.h>
-
-asmlinkage void ret_from_fork(void);
-
-/* Points to the SDRAM backup memory for the stack that is currently in
- * L1 scratchpad memory.
- */
-void *current_l1_stack_save;
-
-/* The number of tasks currently using a L1 stack area.  The SRAM is
- * allocated/deallocated whenever this changes from/to zero.
- */
-int nr_l1stack_tasks;
-
-/* Start and length of the area in L1 scratchpad memory which we've allocated
- * for process stacks.
- */
-void *l1_stack_base;
-unsigned long l1_stack_len;
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-/*
- * The idle loop on BFIN
- */
-#ifdef CONFIG_IDLE_L1
-void arch_cpu_idle(void)__attribute__((l1_text));
-#endif
-
-/*
- * This is our default idle handler.  We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
- */
-void arch_cpu_idle(void)
-{
-#ifdef CONFIG_IPIPE
-	ipipe_suspend_domain();
-#endif
-	hard_local_irq_disable();
-	if (!need_resched())
-		idle_with_irq_disabled();
-
-	hard_local_irq_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
-{
-	cpu_die();
-}
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
-{
-	regs->pc = new_ip;
-	if (current->mm)
-		regs->p5 = current->mm->start_data;
-#ifndef CONFIG_SMP
-	task_thread_info(current)->l1_task_info.stack_start =
-		(void *)current->mm->context.stack_start;
-	task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
-	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info,
-	       sizeof(*L1_SCRATCH_TASK_INFO));
-#endif
-	wrusp(new_sp);
-}
-EXPORT_SYMBOL_GPL(start_thread);
-
-void flush_thread(void)
-{
-}
-
-asmlinkage int bfin_clone(unsigned long clone_flags, unsigned long newsp)
-{
-#ifdef __ARCH_SYNC_CORE_DCACHE
-	if (current->nr_cpus_allowed == num_possible_cpus())
-		set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id()));
-#endif
-	if (newsp)
-		newsp -= 12;
-	return do_fork(clone_flags, newsp, 0, NULL, NULL);
-}
-
-int
-copy_thread(unsigned long clone_flags,
-	    unsigned long usp, unsigned long topstk,
-	    struct task_struct *p)
-{
-	struct pt_regs *childregs;
-	unsigned long *v;
-
-	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
-	v = ((unsigned long *)childregs) - 2;
-	if (unlikely(p->flags & PF_KTHREAD)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
-		v[0] = usp;
-		v[1] = topstk;
-		childregs->orig_p0 = -1;
-		childregs->ipend = 0x8000;
-		__asm__ __volatile__("%0 = syscfg;":"=da"(childregs->syscfg):);
-		p->thread.usp = 0;
-	} else {
-		*childregs = *current_pt_regs();
-		childregs->r0 = 0;
-		p->thread.usp = usp ? : rdusp();
-		v[0] = v[1] = 0;
-	}
-
-	p->thread.ksp = (unsigned long)v;
-	p->thread.pc = (unsigned long)ret_from_fork;
-
-	return 0;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long fp, pc;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_page = (unsigned long)p;
-	fp = p->thread.usp;
-	do {
-		if (fp < stack_page + sizeof(struct thread_info) ||
-		    fp >= 8184 + stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (!in_sched_functions(pc))
-			return pc;
-		fp = *(unsigned long *)fp;
-	}
-	while (count++ < 16);
-	return 0;
-}
-
-void finish_atomic_sections (struct pt_regs *regs)
-{
-	int __user *up0 = (int __user *)regs->p0;
-
-	switch (regs->pc) {
-	default:
-		/* not in middle of an atomic step, so resume like normal */
-		return;
-
-	case ATOMIC_XCHG32 + 2:
-		put_user(regs->r1, up0);
-		break;
-
-	case ATOMIC_CAS32 + 2:
-	case ATOMIC_CAS32 + 4:
-		if (regs->r0 == regs->r1)
-	case ATOMIC_CAS32 + 6:
-			put_user(regs->r2, up0);
-		break;
-
-	case ATOMIC_ADD32 + 2:
-		regs->r0 = regs->r1 + regs->r0;
-		/* fall through */
-	case ATOMIC_ADD32 + 4:
-		put_user(regs->r0, up0);
-		break;
-
-	case ATOMIC_SUB32 + 2:
-		regs->r0 = regs->r1 - regs->r0;
-		/* fall through */
-	case ATOMIC_SUB32 + 4:
-		put_user(regs->r0, up0);
-		break;
-
-	case ATOMIC_IOR32 + 2:
-		regs->r0 = regs->r1 | regs->r0;
-		/* fall through */
-	case ATOMIC_IOR32 + 4:
-		put_user(regs->r0, up0);
-		break;
-
-	case ATOMIC_AND32 + 2:
-		regs->r0 = regs->r1 & regs->r0;
-		/* fall through */
-	case ATOMIC_AND32 + 4:
-		put_user(regs->r0, up0);
-		break;
-
-	case ATOMIC_XOR32 + 2:
-		regs->r0 = regs->r1 ^ regs->r0;
-		/* fall through */
-	case ATOMIC_XOR32 + 4:
-		put_user(regs->r0, up0);
-		break;
-	}
-
-	/*
-	 * We've finished the atomic section, and the only thing left for
-	 * userspace is to do a RTS, so we might as well handle that too
-	 * since we need to update the PC anyways.
-	 */
-	regs->pc = regs->rets;
-}
-
-static inline
-int in_mem(unsigned long addr, unsigned long size,
-           unsigned long start, unsigned long end)
-{
-	return addr >= start && addr + size <= end;
-}
-static inline
-int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
-                     unsigned long const_addr, unsigned long const_size)
-{
-	return const_size &&
-	       in_mem(addr, size, const_addr + off, const_addr + const_size);
-}
-static inline
-int in_mem_const(unsigned long addr, unsigned long size,
-                 unsigned long const_addr, unsigned long const_size)
-{
-	return in_mem_const_off(addr, size, 0, const_addr, const_size);
-}
-#ifdef CONFIG_BF60x
-#define ASYNC_ENABLED(bnum, bctlnum)	1
-#else
-#define ASYNC_ENABLED(bnum, bctlnum) \
-({ \
-	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \
-	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \
-	1; \
-})
-#endif
-/*
- * We can't read EBIU banks that aren't enabled or we end up hanging
- * on the access to the async space.  Make sure we validate accesses
- * that cross async banks too.
- *	0 - found, but unusable
- *	1 - found & usable
- *	2 - not found
- */
-static
-int in_async(unsigned long addr, unsigned long size)
-{
-	if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) {
-		if (!ASYNC_ENABLED(0, 0))
-			return 0;
-		if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)
-			return 1;
-		size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr;
-		addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE;
-	}
-	if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) {
-		if (!ASYNC_ENABLED(1, 0))
-			return 0;
-		if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)
-			return 1;
-		size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr;
-		addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE;
-	}
-	if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) {
-		if (!ASYNC_ENABLED(2, 1))
-			return 0;
-		if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE)
-			return 1;
-		size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr;
-		addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE;
-	}
-	if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-		if (ASYNC_ENABLED(3, 1))
-			return 0;
-		if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
-			return 1;
-		return 0;
-	}
-
-	/* not within async bounds */
-	return 2;
-}
-
-int bfin_mem_access_type(unsigned long addr, unsigned long size)
-{
-	int cpu = raw_smp_processor_id();
-
-	/* Check that things do not wrap around */
-	if (addr > ULONG_MAX - size)
-		return -EFAULT;
-
-	if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
-		return BFIN_MEM_ACCESS_CORE;
-
-	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
-		return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
-		return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
-		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
-		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-#ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
-		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
-		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
-		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
-		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-#endif
-	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
-		return BFIN_MEM_ACCESS_CORE;
-
-	if (addr >= SYSMMR_BASE)
-		return BFIN_MEM_ACCESS_CORE_ONLY;
-
-	switch (in_async(addr, size)) {
-	case 0: return -EFAULT;
-	case 1: return BFIN_MEM_ACCESS_CORE;
-	case 2: /* fall through */;
-	}
-
-	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
-		return BFIN_MEM_ACCESS_CORE;
-	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
-		return BFIN_MEM_ACCESS_DMA;
-
-	return -EFAULT;
-}
-
-#if defined(CONFIG_ACCESS_CHECK)
-#ifdef CONFIG_ACCESS_OK_L1
-__attribute__((l1_text))
-#endif
-/* Return 1 if access to memory range is OK, 0 otherwise */
-int _access_ok(unsigned long addr, unsigned long size)
-{
-	int aret;
-
-	if (size == 0)
-		return 1;
-	/* Check that things do not wrap around */
-	if (addr > ULONG_MAX - size)
-		return 0;
-	if (uaccess_kernel())
-		return 1;
-#ifdef CONFIG_MTD_UCLINUX
-	if (1)
-#else
-	if (0)
-#endif
-	{
-		if (in_mem(addr, size, memory_start, memory_end))
-			return 1;
-		if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
-			return 1;
-# ifndef CONFIG_ROMFS_ON_MTD
-		if (0)
-# endif
-			/* For XIP, allow user space to use pointers within the ROMFS.  */
-			if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
-				return 1;
-	} else {
-		if (in_mem(addr, size, memory_start, physical_mem_end))
-			return 1;
-	}
-
-	if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
-		return 1;
-
-	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
-		return 1;
-	if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
-		return 1;
-	if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
-		return 1;
-	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
-		return 1;
-#ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
-		return 1;
-	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
-		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
-		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
-		return 1;
-#endif
-
-#ifndef CONFIG_EXCEPTION_L1_SCRATCH
-	if (in_mem_const(addr, size, (unsigned long)l1_stack_base, l1_stack_len))
-		return 1;
-#endif
-
-	aret = in_async(addr, size);
-	if (aret < 2)
-		return aret;
-
-	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
-		return 1;
-
-	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
-		return 1;
-	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
-		return 1;
-
-	return 0;
-}
-EXPORT_SYMBOL(_access_ok);
-#endif /* CONFIG_ACCESS_CHECK */
diff --git a/arch/blackfin/kernel/pseudodbg.c b/arch/blackfin/kernel/pseudodbg.c
deleted file mode 100644
index db85bc94334e..000000000000
--- a/arch/blackfin/kernel/pseudodbg.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* The fake debug assert instructions
- *
- * Copyright 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-const char * const greg_names[] = {
-	"R0",    "R1",      "R2",     "R3",    "R4",    "R5",    "R6",     "R7",
-	"P0",    "P1",      "P2",     "P3",    "P4",    "P5",    "SP",     "FP",
-	"I0",    "I1",      "I2",     "I3",    "M0",    "M1",    "M2",     "M3",
-	"B0",    "B1",      "B2",     "B3",    "L0",    "L1",    "L2",     "L3",
-	"A0.X",  "A0.W",    "A1.X",   "A1.W",  "<res>", "<res>", "ASTAT",  "RETS",
-	"<res>", "<res>",   "<res>",  "<res>", "<res>", "<res>", "<res>",  "<res>",
-	"LC0",   "LT0",     "LB0",    "LC1",   "LT1",   "LB1",   "CYCLES", "CYCLES2",
-	"USP",   "SEQSTAT", "SYSCFG", "RETI",  "RETX",  "RETN",  "RETE",   "EMUDAT",
-};
-
-static const char *get_allreg_name(int grp, int reg)
-{
-	return greg_names[(grp << 3) | reg];
-}
-
-/*
- * Unfortunately, the pt_regs structure is not laid out the same way as the
- * hardware register file, so we need to do some fix ups.
- *
- * CYCLES is not stored in the pt_regs structure - so, we just read it from
- * the hardware.
- *
- * Don't support:
- *  - All reserved registers
- *  - All in group 7 are (supervisors only)
- */
-
-static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
-{
-	long *val = &fp->r0;
-	unsigned long tmp;
-
-	/* Only do Dregs and Pregs for now */
-	if (grp == 5 ||
-	   (grp == 4 && (reg == 4 || reg == 5)) ||
-	   (grp == 7))
-		return false;
-
-	if (grp == 0 || (grp == 1 && reg < 6))
-		val -= (reg + 8 * grp);
-	else if (grp == 1 && reg == 6)
-		val = &fp->usp;
-	else if (grp == 1 && reg == 7)
-		val = &fp->fp;
-	else if (grp == 2) {
-		val = &fp->i0;
-		val -= reg;
-	} else if (grp == 3 && reg >= 4) {
-		val = &fp->l0;
-		val -= (reg - 4);
-	} else if (grp == 3 && reg < 4) {
-		val = &fp->b0;
-		val -= reg;
-	} else if (grp == 4 && reg < 4) {
-		val = &fp->a0x;
-		val -= reg;
-	} else if (grp == 4 && reg == 6)
-		val = &fp->astat;
-	else if (grp == 4 && reg == 7)
-		val = &fp->rets;
-	else if (grp == 6 && reg < 6) {
-		val = &fp->lc0;
-		val -= reg;
-	} else if (grp == 6 && reg == 6) {
-		__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
-		val = &tmp;
-	} else if (grp == 6 && reg == 7) {
-		__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
-		val = &tmp;
-	}
-
-	*value = *val;
-	return true;
-
-}
-
-#define PseudoDbg_Assert_opcode         0xf0000000
-#define PseudoDbg_Assert_expected_bits  0
-#define PseudoDbg_Assert_expected_mask  0xffff
-#define PseudoDbg_Assert_regtest_bits   16
-#define PseudoDbg_Assert_regtest_mask   0x7
-#define PseudoDbg_Assert_grp_bits       19
-#define PseudoDbg_Assert_grp_mask       0x7
-#define PseudoDbg_Assert_dbgop_bits     22
-#define PseudoDbg_Assert_dbgop_mask     0x3
-#define PseudoDbg_Assert_dontcare_bits  24
-#define PseudoDbg_Assert_dontcare_mask  0x7
-#define PseudoDbg_Assert_code_bits      27
-#define PseudoDbg_Assert_code_mask      0x1f
-
-/*
- * DBGA - debug assert
- */
-bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
-{
-	int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
-	int dbgop    = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
-	int grp      = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
-	int regtest  = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
-	long value;
-
-	if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
-		return false;
-
-	if (!fix_up_reg(fp, &value, grp, regtest))
-		return false;
-
-	if (dbgop == 0 || dbgop == 2) {
-		/* DBGA ( regs_lo , uimm16 ) */
-		/* DBGAL ( regs , uimm16 ) */
-		if (expected != (value & 0xFFFF)) {
-			pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
-				get_allreg_name(grp, regtest),
-				expected, (unsigned int)(value & 0xFFFF));
-			return false;
-		}
-
-	} else if (dbgop == 1 || dbgop == 3) {
-		/* DBGA ( regs_hi , uimm16 ) */
-		/* DBGAH ( regs , uimm16 ) */
-		if (expected != ((value >> 16) & 0xFFFF)) {
-			pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
-				get_allreg_name(grp, regtest),
-				expected, (unsigned int)((value >> 16) & 0xFFFF));
-			return false;
-		}
-	}
-
-	fp->pc += 4;
-	return true;
-}
-
-#define PseudoDbg_opcode        0xf8000000
-#define PseudoDbg_reg_bits      0
-#define PseudoDbg_reg_mask      0x7
-#define PseudoDbg_grp_bits      3
-#define PseudoDbg_grp_mask      0x7
-#define PseudoDbg_fn_bits       6
-#define PseudoDbg_fn_mask       0x3
-#define PseudoDbg_code_bits     8
-#define PseudoDbg_code_mask     0xff
-
-/*
- * DBG - debug (dump a register value out)
- */
-bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
-{
-	int grp, fn, reg;
-	long value, value1;
-
-	if ((opcode & 0xFF000000) != PseudoDbg_opcode)
-		return false;
-
-	opcode >>= 16;
-	grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
-	fn  = ((opcode >> PseudoDbg_fn_bits)  & PseudoDbg_fn_mask);
-	reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
-
-	if (fn == 3 && (reg == 0 || reg == 1)) {
-		if (!fix_up_reg(fp, &value, 4, 2 * reg))
-			return false;
-		if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
-			return false;
-
-		pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
-		fp->pc += 2;
-		return true;
-
-	} else if (fn == 0) {
-		if (!fix_up_reg(fp, &value, grp, reg))
-			return false;
-
-		pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
-		fp->pc += 2;
-		return true;
-	}
-
-	return false;
-}
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
deleted file mode 100644
index a6827095b99a..000000000000
--- a/arch/blackfin/kernel/ptrace.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- * these modifications are Copyright 2004-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/elf.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/regset.h>
-#include <linux/signal.h>
-#include <linux/tracehook.h>
-#include <linux/uaccess.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/asm-offsets.h>
-#include <asm/dma.h>
-#include <asm/fixed_code.h>
-#include <asm/cacheflush.h>
-#include <asm/mem_map.h>
-#include <asm/mmu_context.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-static inline long
-get_reg(struct task_struct *task, unsigned long regno,
-	unsigned long __user *datap)
-{
-	long tmp;
-	struct pt_regs *regs = task_pt_regs(task);
-
-	if (regno & 3 || regno > PT_LAST_PSEUDO)
-		return -EIO;
-
-	switch (regno) {
-	case PT_TEXT_ADDR:
-		tmp = task->mm->start_code;
-		break;
-	case PT_TEXT_END_ADDR:
-		tmp = task->mm->end_code;
-		break;
-	case PT_DATA_ADDR:
-		tmp = task->mm->start_data;
-		break;
-	case PT_USP:
-		tmp = task->thread.usp;
-		break;
-	default:
-		if (regno < sizeof(*regs)) {
-			void *reg_ptr = regs;
-			tmp = *(long *)(reg_ptr + regno);
-		} else
-			return -EIO;
-	}
-
-	return put_user(tmp, datap);
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-static inline int
-put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
-{
-	struct pt_regs *regs = task_pt_regs(task);
-
-	if (regno & 3 || regno > PT_LAST_PSEUDO)
-		return -EIO;
-
-	switch (regno) {
-	case PT_PC:
-		/*********************************************************************/
-		/* At this point the kernel is most likely in exception.             */
-		/* The RETX register will be used to populate the pc of the process. */
-		/*********************************************************************/
-		regs->retx = data;
-		regs->pc = data;
-		break;
-	case PT_RETX:
-		break;		/* regs->retx = data; break; */
-	case PT_USP:
-		regs->usp = data;
-		task->thread.usp = data;
-		break;
-	case PT_SYSCFG:	/* don't let userspace screw with this */
-		if ((data & ~1) != 0x6)
-			pr_warning("ptrace: ignore syscfg write of %#lx\n", data);
-		break;		/* regs->syscfg = data; break; */
-	default:
-		if (regno < sizeof(*regs)) {
-			void *reg_offset = regs;
-			*(long *)(reg_offset + regno) = data;
-		}
-		/* Ignore writes to pseudo registers */
-	}
-
-	return 0;
-}
-
-/*
- * check that an address falls within the bounds of the target process's memory mappings
- */
-int
-is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len)
-{
-	bool valid;
-	struct vm_area_struct *vma;
-	struct sram_list_struct *sraml;
-
-	/* overflow */
-	if (start + len < start)
-		return -EIO;
-
-	down_read(&child->mm->mmap_sem);
-	vma = find_vma(child->mm, start);
-	valid = vma && start >= vma->vm_start && start + len <= vma->vm_end;
-	up_read(&child->mm->mmap_sem);
-	if (valid)
-		return 0;
-
-	for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
-		if (start >= (unsigned long)sraml->addr
-		    && start + len < (unsigned long)sraml->addr + sraml->length)
-			return 0;
-
-	if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
-		return 0;
-
-#ifdef CONFIG_APP_STACK_L1
-	if (child->mm->context.l1_stack_save)
-		if (start >= (unsigned long)l1_stack_base &&
-			start + len < (unsigned long)l1_stack_base + l1_stack_len)
-			return 0;
-#endif
-
-	return -EIO;
-}
-
-/*
- * retrieve the contents of Blackfin userspace general registers
- */
-static int genregs_get(struct task_struct *target,
-		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       void *kbuf, void __user *ubuf)
-{
-	struct pt_regs *regs = task_pt_regs(target);
-	int ret;
-
-	/* This sucks ... */
-	regs->usp = target->thread.usp;
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  regs, 0, sizeof(*regs));
-	if (ret < 0)
-		return ret;
-
-	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					sizeof(*regs), -1);
-}
-
-/*
- * update the contents of the Blackfin userspace general registers
- */
-static int genregs_set(struct task_struct *target,
-		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       const void *kbuf, const void __user *ubuf)
-{
-	struct pt_regs *regs = task_pt_regs(target);
-	int ret;
-
-	/* Don't let people set SYSCFG (it's at the end of pt_regs) */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 regs, 0, PT_SYSCFG);
-	if (ret < 0)
-		return ret;
-
-	/* This sucks ... */
-	target->thread.usp = regs->usp;
-	/* regs->retx = regs->pc; */
-
-	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_SYSCFG, -1);
-}
-
-/*
- * Define the register sets available on the Blackfin under Linux
- */
-enum bfin_regset {
-	REGSET_GENERAL,
-};
-
-static const struct user_regset bfin_regsets[] = {
-	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS,
-		.n              = sizeof(struct pt_regs) / sizeof(long),
-		.size           = sizeof(long),
-		.align          = sizeof(long),
-		.get            = genregs_get,
-		.set            = genregs_set,
-	},
-};
-
-static const struct user_regset_view user_bfin_native_view = {
-	.name      = "Blackfin",
-	.e_machine = EM_BLACKFIN,
-	.regsets   = bfin_regsets,
-	.n         = ARRAY_SIZE(bfin_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
-	return &user_bfin_native_view;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs = task_pt_regs(child);
-	regs->syscfg |= SYSCFG_SSSTEP;
-
-	set_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs = task_pt_regs(child);
-	regs->syscfg &= ~SYSCFG_SSSTEP;
-
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	unsigned long __user *datap = (unsigned long __user *)data;
-	void *paddr = (void *)addr;
-
-	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKDATA:
-		pr_debug("ptrace: PEEKDATA\n");
-		/* fall through */
-	case PTRACE_PEEKTEXT:	/* read word at location addr. */
-		{
-			unsigned long tmp = 0;
-			int copied = 0, to_copy = sizeof(tmp);
-
-			ret = -EIO;
-			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %i\n", addr, to_copy);
-			if (is_user_addr_valid(child, addr, to_copy) < 0)
-				break;
-			pr_debug("ptrace: user address is valid\n");
-
-			switch (bfin_mem_access_type(addr, to_copy)) {
-			case BFIN_MEM_ACCESS_CORE:
-			case BFIN_MEM_ACCESS_CORE_ONLY:
-				copied = ptrace_access_vm(child, addr, &tmp,
-							   to_copy, FOLL_FORCE);
-				if (copied)
-					break;
-
-				/* hrm, why didn't that work ... maybe no mapping */
-				if (addr >= FIXED_CODE_START &&
-				    addr + to_copy <= FIXED_CODE_END) {
-					copy_from_user_page(0, 0, 0, &tmp, paddr, to_copy);
-					copied = to_copy;
-				} else if (addr >= BOOT_ROM_START) {
-					memcpy(&tmp, paddr, to_copy);
-					copied = to_copy;
-				}
-
-				break;
-			case BFIN_MEM_ACCESS_DMA:
-				if (safe_dma_memcpy(&tmp, paddr, to_copy))
-					copied = to_copy;
-				break;
-			case BFIN_MEM_ACCESS_ITEST:
-				if (isram_memcpy(&tmp, paddr, to_copy))
-					copied = to_copy;
-				break;
-			default:
-				copied = 0;
-				break;
-			}
-
-			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
-			if (copied == to_copy)
-				ret = put_user(tmp, datap);
-			break;
-		}
-
-		/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKEDATA:
-		pr_debug("ptrace: PTRACE_PEEKDATA\n");
-		/* fall through */
-	case PTRACE_POKETEXT:	/* write the word at location addr. */
-		{
-			int copied = 0, to_copy = sizeof(data);
-
-			ret = -EIO;
-			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %i bytes %lx\n",
-			         addr, to_copy, data);
-			if (is_user_addr_valid(child, addr, to_copy) < 0)
-				break;
-			pr_debug("ptrace: user address is valid\n");
-
-			switch (bfin_mem_access_type(addr, to_copy)) {
-			case BFIN_MEM_ACCESS_CORE:
-			case BFIN_MEM_ACCESS_CORE_ONLY:
-				copied = ptrace_access_vm(child, addr, &data,
-				                           to_copy,
-							   FOLL_FORCE | FOLL_WRITE);
-				break;
-			case BFIN_MEM_ACCESS_DMA:
-				if (safe_dma_memcpy(paddr, &data, to_copy))
-					copied = to_copy;
-				break;
-			case BFIN_MEM_ACCESS_ITEST:
-				if (isram_memcpy(paddr, &data, to_copy))
-					copied = to_copy;
-				break;
-			default:
-				copied = 0;
-				break;
-			}
-
-			pr_debug("ptrace: copied size %d\n", copied);
-			if (copied == to_copy)
-				ret = 0;
-			break;
-		}
-
-	case PTRACE_PEEKUSR:
-		switch (addr) {
-#ifdef CONFIG_BINFMT_ELF_FDPIC	/* backwards compat */
-		case PT_FDPIC_EXEC:
-			request = PTRACE_GETFDPIC;
-			addr = PTRACE_GETFDPIC_EXEC;
-			goto case_default;
-		case PT_FDPIC_INTERP:
-			request = PTRACE_GETFDPIC;
-			addr = PTRACE_GETFDPIC_INTERP;
-			goto case_default;
-#endif
-		default:
-			ret = get_reg(child, addr, datap);
-		}
-		pr_debug("ptrace: PEEKUSR reg %li with %#lx = %i\n", addr, data, ret);
-		break;
-
-	case PTRACE_POKEUSR:
-		ret = put_reg(child, addr, data);
-		pr_debug("ptrace: POKEUSR reg %li with %li = %i\n", addr, data, ret);
-		break;
-
-	case PTRACE_GETREGS:
-		pr_debug("ptrace: PTRACE_GETREGS\n");
-		return copy_regset_to_user(child, &user_bfin_native_view,
-					   REGSET_GENERAL,
-					   0, sizeof(struct pt_regs),
-					   datap);
-
-	case PTRACE_SETREGS:
-		pr_debug("ptrace: PTRACE_SETREGS\n");
-		return copy_regset_from_user(child, &user_bfin_native_view,
-					     REGSET_GENERAL,
-					     0, sizeof(struct pt_regs),
-					     datap);
-
-	case_default:
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
-
-asmlinkage int syscall_trace_enter(struct pt_regs *regs)
-{
-	int ret = 0;
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		ret = tracehook_report_syscall_entry(regs);
-
-	return ret;
-}
-
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
-{
-	int step;
-
-	step = test_thread_flag(TIF_SINGLESTEP);
-	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, step);
-}
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
deleted file mode 100644
index c4f50a328501..000000000000
--- a/arch/blackfin/kernel/reboot.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/blackfin/kernel/reboot.c - handle shutdown/reboot
- *
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/interrupt.h>
-#include <asm/bfin-global.h>
-#include <asm/reboot.h>
-#include <asm/bfrom.h>
-
-/* A system soft reset makes external memory unusable so force
- * this function into L1.  We use the compiler ssync here rather
- * than SSYNC() because it's safe (no interrupts and such) and
- * we save some L1.  We do not need to force sanity in the SYSCR
- * register as the BMODE selection bit is cleared by the soft
- * reset while the Core B bit (on dual core parts) is cleared by
- * the core reset.
- */
-__attribute__ ((__l1_text__, __noreturn__))
-static void bfin_reset(void)
-{
-#ifndef CONFIG_BF60x
-	if (!ANOMALY_05000353 && !ANOMALY_05000386)
-		bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20));
-
-	/* Wait for completion of "system" events such as cache line
-	 * line fills so that we avoid infinite stalls later on as
-	 * much as possible.  This code is in L1, so it won't trigger
-	 * any such event after this point in time.
-	 */
-	__builtin_bfin_ssync();
-
-	/* Initiate System software reset. */
-	bfin_write_SWRST(0x7);
-
-	/* Due to the way reset is handled in the hardware, we need
-	 * to delay for 10 SCLKS.  The only reliable way to do this is
-	 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
-	 * we'll assume worse case which is a 1:15 ratio.
-	 */
-	asm(
-		"LSETUP (1f, 1f) LC0 = %0\n"
-		"1: nop;"
-		:
-		: "a" (15 * 10)
-		: "LC0", "LB0", "LT0"
-	);
-
-	/* Clear System software reset */
-	bfin_write_SWRST(0);
-
-	/* The BF526 ROM will crash during reset */
-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-	/* Seems to be fixed with newer parts though ... */
-	if (__SILICON_REVISION__ < 1 && bfin_revid() < 1)
-		bfin_read_SWRST();
-#endif
-	/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
-	 * though as the System state is all reset now.
-	 */
-	asm(
-		"LSETUP (1f, 1f) LC1 = %0\n"
-		"1: nop;"
-		:
-		: "a" (15 * 1)
-		: "LC1", "LB1", "LT1"
-	);
-
-	while (1)
-		/* Issue core reset */
-		asm("raise 1");
-#else
-	while (1)
-		bfin_write_RCU0_CTL(0x1);
-#endif
-}
-
-__attribute__((weak))
-void native_machine_restart(char *cmd)
-{
-}
-
-void machine_restart(char *cmd)
-{
-	native_machine_restart(cmd);
-	if (smp_processor_id())
-		smp_call_function((void *)bfin_reset, 0, 1);
-	else
-		bfin_reset();
-}
-
-__attribute__((weak))
-void native_machine_halt(void)
-{
-	idle_with_irq_disabled();
-}
-
-void machine_halt(void)
-{
-	native_machine_halt();
-}
-
-__attribute__((weak))
-void native_machine_power_off(void)
-{
-	idle_with_irq_disabled();
-}
-
-void machine_power_off(void)
-{
-	native_machine_power_off();
-}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
deleted file mode 100644
index ad82468bd94d..000000000000
--- a/arch/blackfin/kernel/setup.c
+++ /dev/null
@@ -1,1468 +0,0 @@
-/*
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/cpu.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/pfn.h>
-
-#ifdef CONFIG_MTD_UCLINUX
-#include <linux/mtd/map.h>
-#include <linux/ext2_fs.h>
-#include <uapi/linux/cramfs_fs.h>
-#include <linux/romfs_fs.h>
-#endif
-
-#include <asm/cplb.h>
-#include <asm/cacheflush.h>
-#include <asm/blackfin.h>
-#include <asm/cplbinit.h>
-#include <asm/clocks.h>
-#include <asm/div64.h>
-#include <asm/cpu.h>
-#include <asm/fixed_code.h>
-#include <asm/early_printk.h>
-#include <asm/irq_handler.h>
-#include <asm/pda.h>
-#ifdef CONFIG_BF60x
-#include <mach/pm.h>
-#endif
-#ifdef CONFIG_SCB_PRIORITY
-#include <asm/scb.h>
-#endif
-
-u16 _bfin_swrst;
-EXPORT_SYMBOL(_bfin_swrst);
-
-unsigned long memory_start, memory_end, physical_mem_end;
-unsigned long _rambase, _ramstart, _ramend;
-unsigned long reserved_mem_dcache_on;
-unsigned long reserved_mem_icache_on;
-EXPORT_SYMBOL(memory_start);
-EXPORT_SYMBOL(memory_end);
-EXPORT_SYMBOL(physical_mem_end);
-EXPORT_SYMBOL(_ramend);
-EXPORT_SYMBOL(reserved_mem_dcache_on);
-
-#ifdef CONFIG_MTD_UCLINUX
-extern struct map_info uclinux_ram_map;
-unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
-EXPORT_SYMBOL(memory_mtd_end);
-EXPORT_SYMBOL(memory_mtd_start);
-EXPORT_SYMBOL(mtd_size);
-#endif
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-struct blackfin_initial_pda __initdata initial_pda;
-
-/* boot memmap, for parsing "memmap=" */
-#define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
-#define BFIN_MEMMAP_RAM		1
-#define BFIN_MEMMAP_RESERVED	2
-static struct bfin_memmap {
-	int nr_map;
-	struct bfin_memmap_entry {
-		unsigned long long addr; /* start of memory segment */
-		unsigned long long size;
-		unsigned long type;
-	} map[BFIN_MEMMAP_MAX];
-} bfin_memmap __initdata;
-
-/* for memmap sanitization */
-struct change_member {
-	struct bfin_memmap_entry *pentry; /* pointer to original entry */
-	unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
-static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
-static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
-static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
-
-DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data);
-
-static int early_init_clkin_hz(char *buf);
-
-#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
-void __init generate_cplb_tables(void)
-{
-	unsigned int cpu;
-
-	generate_cplb_tables_all();
-	/* Generate per-CPU I&D CPLB tables */
-	for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
-		generate_cplb_tables_cpu(cpu);
-}
-#endif
-
-void bfin_setup_caches(unsigned int cpu)
-{
-#ifdef CONFIG_BFIN_ICACHE
-	bfin_icache_init(icplb_tbl[cpu]);
-#endif
-
-#ifdef CONFIG_BFIN_DCACHE
-	bfin_dcache_init(dcplb_tbl[cpu]);
-#endif
-
-	bfin_setup_cpudata(cpu);
-
-	/*
-	 * In cache coherence emulation mode, we need to have the
-	 * D-cache enabled before running any atomic operation which
-	 * might involve cache invalidation (i.e. spinlock, rwlock).
-	 * So printk's are deferred until then.
-	 */
-#ifdef CONFIG_BFIN_ICACHE
-	printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
-	printk(KERN_INFO "  External memory:"
-# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
-	       " cacheable"
-# else
-	       " uncacheable"
-# endif
-	       " in instruction cache\n");
-	if (L2_LENGTH)
-		printk(KERN_INFO "  L2 SRAM        :"
-# ifdef CONFIG_BFIN_L2_ICACHEABLE
-		       " cacheable"
-# else
-		       " uncacheable"
-# endif
-		       " in instruction cache\n");
-
-#else
-	printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
-#endif
-
-#ifdef CONFIG_BFIN_DCACHE
-	printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
-	printk(KERN_INFO "  External memory:"
-# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
-	       " cacheable (write-back)"
-# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
-	       " cacheable (write-through)"
-# else
-	       " uncacheable"
-# endif
-	       " in data cache\n");
-	if (L2_LENGTH)
-		printk(KERN_INFO "  L2 SRAM        :"
-# if defined CONFIG_BFIN_L2_WRITEBACK
-		       " cacheable (write-back)"
-# elif defined CONFIG_BFIN_L2_WRITETHROUGH
-		       " cacheable (write-through)"
-# else
-		       " uncacheable"
-# endif
-		       " in data cache\n");
-#else
-	printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
-#endif
-}
-
-void bfin_setup_cpudata(unsigned int cpu)
-{
-	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
-
-	cpudata->imemctl = bfin_read_IMEM_CONTROL();
-	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
-}
-
-void __init bfin_cache_init(void)
-{
-#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
-	generate_cplb_tables();
-#endif
-	bfin_setup_caches(0);
-}
-
-void __init bfin_relocate_l1_mem(void)
-{
-	unsigned long text_l1_len = (unsigned long)_text_l1_len;
-	unsigned long data_l1_len = (unsigned long)_data_l1_len;
-	unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
-	unsigned long l2_len = (unsigned long)_l2_len;
-
-	early_shadow_stamp();
-
-	/*
-	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
-	 * we know that everything about l1 text/data is nice and aligned,
-	 * so copy by 4 byte chunks, and don't worry about overlapping
-	 * src/dest.
-	 *
-	 * We can't use the dma_memcpy functions, since they can call
-	 * scheduler functions which might be in L1 :( and core writes
-	 * into L1 instruction cause bad access errors, so we are stuck,
-	 * we are required to use DMA, but can't use the common dma
-	 * functions. We can't use memcpy either - since that might be
-	 * going to be in the relocated L1
-	 */
-
-	blackfin_dma_early_init();
-
-	/* if necessary, copy L1 text to L1 instruction SRAM */
-	if (L1_CODE_LENGTH && text_l1_len)
-		early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len);
-
-	/* if necessary, copy L1 data to L1 data bank A SRAM */
-	if (L1_DATA_A_LENGTH && data_l1_len)
-		early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len);
-
-	/* if necessary, copy L1 data B to L1 data bank B SRAM */
-	if (L1_DATA_B_LENGTH && data_b_l1_len)
-		early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len);
-
-	early_dma_memcpy_done();
-
-#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
-	blackfin_iflush_l1_entry[0] = (unsigned long)blackfin_icache_flush_range_l1;
-#endif
-
-	/* if necessary, copy L2 text/data to L2 SRAM */
-	if (L2_LENGTH && l2_len)
-		memcpy(_stext_l2, _l2_lma, l2_len);
-}
-
-#ifdef CONFIG_SMP
-void __init bfin_relocate_coreb_l1_mem(void)
-{
-	unsigned long text_l1_len = (unsigned long)_text_l1_len;
-	unsigned long data_l1_len = (unsigned long)_data_l1_len;
-	unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
-
-	blackfin_dma_early_init();
-
-	/* if necessary, copy L1 text to L1 instruction SRAM */
-	if (L1_CODE_LENGTH && text_l1_len)
-		early_dma_memcpy((void *)COREB_L1_CODE_START, _text_l1_lma,
-				text_l1_len);
-
-	/* if necessary, copy L1 data to L1 data bank A SRAM */
-	if (L1_DATA_A_LENGTH && data_l1_len)
-		early_dma_memcpy((void *)COREB_L1_DATA_A_START, _data_l1_lma,
-				data_l1_len);
-
-	/* if necessary, copy L1 data B to L1 data bank B SRAM */
-	if (L1_DATA_B_LENGTH && data_b_l1_len)
-		early_dma_memcpy((void *)COREB_L1_DATA_B_START, _data_b_l1_lma,
-				data_b_l1_len);
-
-	early_dma_memcpy_done();
-
-#ifdef CONFIG_ICACHE_FLUSH_L1
-	blackfin_iflush_l1_entry[1] = (unsigned long)blackfin_icache_flush_range_l1 -
-			(unsigned long)_stext_l1 + COREB_L1_CODE_START;
-#endif
-}
-#endif
-
-#ifdef CONFIG_ROMKERNEL
-void __init bfin_relocate_xip_data(void)
-{
-	early_shadow_stamp();
-
-	memcpy(_sdata, _data_lma, (unsigned long)_data_len - THREAD_SIZE + sizeof(struct thread_info));
-	memcpy(_sinitdata, _init_data_lma, (unsigned long)_init_data_len);
-}
-#endif
-
-/* add_memory_region to memmap */
-static void __init add_memory_region(unsigned long long start,
-			      unsigned long long size, int type)
-{
-	int i;
-
-	i = bfin_memmap.nr_map;
-
-	if (i == BFIN_MEMMAP_MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	bfin_memmap.map[i].addr = start;
-	bfin_memmap.map[i].size = size;
-	bfin_memmap.map[i].type = type;
-	bfin_memmap.nr_map++;
-}
-
-/*
- * Sanitize the boot memmap, removing overlaps.
- */
-static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
-{
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following (1,2,3,4 = memory types)
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2)
-		return -1;
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in memmap */
-	for (i = 0; i < old_nr; i++)
-		if (map[i].addr + map[i].size < map[i].addr)
-			return -1;
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i = 0; i < 2*old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i = 0; i < old_nr; i++) {
-		if (map[i].size != 0) {
-			change_point[chgidx]->addr = map[i].addr;
-			change_point[chgidx++]->pentry = &map[i];
-			change_point[chgidx]->addr = map[i].addr + map[i].size;
-			change_point[chgidx++]->pentry = &map[i];
-		}
-	}
-	chg_nr = chgidx;	/* true number of change-points */
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing) {
-		still_changing = 0;
-		for (i = 1; i < chg_nr; i++) {
-			/* if <current_addr> > <last_addr>, swap */
-			/* or, if current=<start_addr> & last=<end_addr>, swap */
-			if ((change_point[i]->addr < change_point[i-1]->addr) ||
-				((change_point[i]->addr == change_point[i-1]->addr) &&
-				 (change_point[i]->addr == change_point[i]->pentry->addr) &&
-				 (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
-			   ) {
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing = 1;
-			}
-		}
-	}
-
-	/* create a new memmap, removing overlaps */
-	overlap_entries = 0;	/* number of entries in the overlap table */
-	new_entry = 0;		/* index for creating new memmap entries */
-	last_type = 0;		/* start with undefined memory type */
-	last_addr = 0;		/* start with 0 as last starting address */
-	/* loop through change-points, determining affect on the new memmap */
-	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
-		/* keep track of all overlapping memmap entries */
-		if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
-			/* add map entry to overlap list (> 1 entry implies an overlap) */
-			overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
-		} else {
-			/* remove entry from list (order independent, so swap with last) */
-			for (i = 0; i < overlap_entries; i++) {
-				if (overlap_list[i] == change_point[chgidx]->pentry)
-					overlap_list[i] = overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/* if there are overlapping entries, decide which "type" to use */
-		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
-		current_type = 0;
-		for (i = 0; i < overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/* continue building up new memmap based on this information */
-		if (current_type != last_type) {
-			if (last_type != 0) {
-				new_map[new_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/* move forward only if the new size was non-zero */
-				if (new_map[new_entry].size != 0)
-					if (++new_entry >= BFIN_MEMMAP_MAX)
-						break;	/* no more space left for new entries */
-			}
-			if (current_type != 0) {
-				new_map[new_entry].addr = change_point[chgidx]->addr;
-				new_map[new_entry].type = current_type;
-				last_addr = change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	new_nr = new_entry;	/* retain count for new entries */
-
-	/* copy new mapping into original location */
-	memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-static void __init print_memory_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < bfin_memmap.nr_map; i++) {
-		printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
-			bfin_memmap.map[i].addr,
-			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
-		switch (bfin_memmap.map[i].type) {
-		case BFIN_MEMMAP_RAM:
-			printk(KERN_CONT "(usable)\n");
-			break;
-		case BFIN_MEMMAP_RESERVED:
-			printk(KERN_CONT "(reserved)\n");
-			break;
-		default:
-			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
-			break;
-		}
-	}
-}
-
-static __init int parse_memmap(char *arg)
-{
-	unsigned long long start_at, mem_size;
-
-	if (!arg)
-		return -EINVAL;
-
-	mem_size = memparse(arg, &arg);
-	if (*arg == '@') {
-		start_at = memparse(arg+1, &arg);
-		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
-	} else if (*arg == '$') {
-		start_at = memparse(arg+1, &arg);
-		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
-	}
-
-	return 0;
-}
-
-/*
- * Initial parsing of the command line.  Currently, we support:
- *  - Controlling the linux memory size: mem=xxx[KMG]
- *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
- *       $ -> reserved memory is dcacheable
- *       # -> reserved memory is icacheable
- *  - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
- *       @ from <start> to <start>+<mem>, type RAM
- *       $ from <start> to <start>+<mem>, type RESERVED
- */
-static __init void parse_cmdline_early(char *cmdline_p)
-{
-	char c = ' ', *to = cmdline_p;
-	unsigned int memsize;
-	for (;;) {
-		if (c == ' ') {
-			if (!memcmp(to, "mem=", 4)) {
-				to += 4;
-				memsize = memparse(to, &to);
-				if (memsize)
-					_ramend = memsize;
-
-			} else if (!memcmp(to, "max_mem=", 8)) {
-				to += 8;
-				memsize = memparse(to, &to);
-				if (memsize) {
-					physical_mem_end = memsize;
-					if (*to != ' ') {
-						if (*to == '$'
-						    || *(to + 1) == '$')
-							reserved_mem_dcache_on = 1;
-						if (*to == '#'
-						    || *(to + 1) == '#')
-							reserved_mem_icache_on = 1;
-					}
-				}
-			} else if (!memcmp(to, "clkin_hz=", 9)) {
-				to += 9;
-				early_init_clkin_hz(to);
-#ifdef CONFIG_EARLY_PRINTK
-			} else if (!memcmp(to, "earlyprintk=", 12)) {
-				to += 12;
-				setup_early_printk(to);
-#endif
-			} else if (!memcmp(to, "memmap=", 7)) {
-				to += 7;
-				parse_memmap(to);
-			}
-		}
-		c = *(to++);
-		if (!c)
-			break;
-	}
-}
-
-/*
- * Setup memory defaults from user config.
- * The physical memory layout looks like:
- *
- *  [_rambase, _ramstart]:		kernel image
- *  [memory_start, memory_end]:		dynamic memory managed by kernel
- *  [memory_end, _ramend]:		reserved memory
- *  	[memory_mtd_start(memory_end),
- *  		memory_mtd_start + mtd_size]:	rootfs (if any)
- *	[_ramend - DMA_UNCACHED_REGION,
- *		_ramend]:			uncached DMA region
- *  [_ramend, physical_mem_end]:	memory not managed by kernel
- */
-static __init void memory_setup(void)
-{
-#ifdef CONFIG_MTD_UCLINUX
-	unsigned long mtd_phys = 0;
-#endif
-	unsigned long max_mem;
-
-	_rambase = CONFIG_BOOT_LOAD;
-	_ramstart = (unsigned long)_end;
-
-	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
-		console_init();
-		panic("DMA region exceeds memory limit: %lu.",
-			_ramend - _ramstart);
-	}
-	max_mem = memory_end = _ramend - DMA_UNCACHED_REGION;
-
-#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-	/* Due to a Hardware Anomaly we need to limit the size of usable
-	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
-	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
-	 */
-# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
-	if (max_mem >= 56 * 1024 * 1024)
-		max_mem = 56 * 1024 * 1024;
-# else
-	if (max_mem >= 60 * 1024 * 1024)
-		max_mem = 60 * 1024 * 1024;
-# endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
-#endif				/* ANOMALY_05000263 */
-
-
-#ifdef CONFIG_MPU
-	/* Round up to multiple of 4MB */
-	memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
-#else
-	memory_start = PAGE_ALIGN(_ramstart);
-#endif
-
-#if defined(CONFIG_MTD_UCLINUX)
-	/* generic memory mapped MTD driver */
-	memory_mtd_end = memory_end;
-
-	mtd_phys = _ramstart;
-	mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
-
-# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
-	if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
-		mtd_size =
-		    PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
-# endif
-
-# if defined(CONFIG_CRAMFS)
-	if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
-		mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
-# endif
-
-# if defined(CONFIG_ROMFS_FS)
-	if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
-	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) {
-		mtd_size =
-		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-
-		/* ROM_FS is XIP, so if we found it, we need to limit memory */
-		if (memory_end > max_mem) {
-			pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n",
-				(max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
-			memory_end = max_mem;
-		}
-	}
-# endif				/* CONFIG_ROMFS_FS */
-
-	/* Since the default MTD_UCLINUX has no magic number, we just blindly
-	 * read 8 past the end of the kernel's image, and look at it.
-	 * When no image is attached, mtd_size is set to a random number
-	 * Do some basic sanity checks before operating on things
-	 */
-	if (mtd_size == 0 || memory_end <= mtd_size) {
-		pr_emerg("Could not find valid ram mtd attached.\n");
-	} else {
-		memory_end -= mtd_size;
-
-		/* Relocate MTD image to the top of memory after the uncached memory area */
-		uclinux_ram_map.phys = memory_mtd_start = memory_end;
-		uclinux_ram_map.size = mtd_size;
-		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
-			_end, mtd_size, (void *)memory_mtd_start);
-		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
-	}
-#endif				/* CONFIG_MTD_UCLINUX */
-
-	/* We need lo limit memory, since everything could have a text section
-	 * of userspace in it, and expose anomaly 05000263. If the anomaly
-	 * doesn't exist, or we don't need to - then dont.
-	 */
-	if (memory_end > max_mem) {
-		pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n",
-				(max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
-		memory_end = max_mem;
-	}
-
-#ifdef CONFIG_MPU
-#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
-	page_mask_nelts = (((_ramend + ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE -
-					ASYNC_BANK0_BASE) >> PAGE_SHIFT) + 31) / 32;
-#else
-	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
-#endif
-	page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
-#endif
-
-	init_mm.start_code = (unsigned long)_stext;
-	init_mm.end_code = (unsigned long)_etext;
-	init_mm.end_data = (unsigned long)_edata;
-	init_mm.brk = (unsigned long)0;
-
-	printk(KERN_INFO "Board Memory: %ldMB\n", (physical_mem_end - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
-	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20);
-
-	printk(KERN_INFO "Memory map:\n"
-	       "  fixedcode = 0x%p-0x%p\n"
-	       "  text      = 0x%p-0x%p\n"
-	       "  rodata    = 0x%p-0x%p\n"
-	       "  bss       = 0x%p-0x%p\n"
-	       "  data      = 0x%p-0x%p\n"
-	       "    stack   = 0x%p-0x%p\n"
-	       "  init      = 0x%p-0x%p\n"
-	       "  available = 0x%p-0x%p\n"
-#ifdef CONFIG_MTD_UCLINUX
-	       "  rootfs    = 0x%p-0x%p\n"
-#endif
-#if DMA_UNCACHED_REGION > 0
-	       "  DMA Zone  = 0x%p-0x%p\n"
-#endif
-		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
-		_stext, _etext,
-		__start_rodata, __end_rodata,
-		__bss_start, __bss_stop,
-		_sdata, _edata,
-		(void *)&init_thread_union,
-		(void *)((int)(&init_thread_union) + THREAD_SIZE),
-		__init_begin, __init_end,
-		(void *)_ramstart, (void *)memory_end
-#ifdef CONFIG_MTD_UCLINUX
-		, (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
-#endif
-#if DMA_UNCACHED_REGION > 0
-		, (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
-#endif
-		);
-}
-
-/*
- * Find the lowest, highest page frame number we have available
- */
-void __init find_min_max_pfn(void)
-{
-	int i;
-
-	max_pfn = 0;
-	min_low_pfn = PFN_DOWN(memory_end);
-
-	for (i = 0; i < bfin_memmap.nr_map; i++) {
-		unsigned long start, end;
-		/* RAM? */
-		if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
-			continue;
-		start = PFN_UP(bfin_memmap.map[i].addr);
-		end = PFN_DOWN(bfin_memmap.map[i].addr +
-				bfin_memmap.map[i].size);
-		if (start >= end)
-			continue;
-		if (end > max_pfn)
-			max_pfn = end;
-		if (start < min_low_pfn)
-			min_low_pfn = start;
-	}
-}
-
-static __init void setup_bootmem_allocator(void)
-{
-	int bootmap_size;
-	int i;
-	unsigned long start_pfn, end_pfn;
-	unsigned long curr_pfn, last_pfn, size;
-
-	/* mark memory between memory_start and memory_end usable */
-	add_memory_region(memory_start,
-		memory_end - memory_start, BFIN_MEMMAP_RAM);
-	/* sanity check for overlap */
-	sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
-	print_memory_map("boot memmap");
-
-	/* initialize globals in linux/bootmem.h */
-	find_min_max_pfn();
-	/* pfn of the last usable page frame */
-	if (max_pfn > memory_end >> PAGE_SHIFT)
-		max_pfn = memory_end >> PAGE_SHIFT;
-	/* pfn of last page frame directly mapped by kernel */
-	max_low_pfn = max_pfn;
-	/* pfn of the first usable page frame after kernel image*/
-	if (min_low_pfn < memory_start >> PAGE_SHIFT)
-		min_low_pfn = memory_start >> PAGE_SHIFT;
-	start_pfn = CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT;
-	end_pfn = memory_end >> PAGE_SHIFT;
-
-	/*
-	 * give all the memory to the bootmap allocator, tell it to put the
-	 * boot mem_map at the start of memory.
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0),
-			memory_start >> PAGE_SHIFT,	/* map goes here */
-			start_pfn, end_pfn);
-
-	/* register the memmap regions with the bootmem allocator */
-	for (i = 0; i < bfin_memmap.nr_map; i++) {
-		/*
-		 * Reserve usable memory
-		 */
-		if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
-			continue;
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
-		if (curr_pfn >= end_pfn)
-			continue;
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
-					 bfin_memmap.map[i].size);
-
-		if (last_pfn > end_pfn)
-			last_pfn = end_pfn;
-
-		/*
-		 * .. finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		size = last_pfn - curr_pfn;
-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-	}
-
-	/* reserve memory before memory_start, including bootmap */
-	reserve_bootmem(CONFIG_PHY_RAM_BASE_ADDRESS,
-		memory_start + bootmap_size + PAGE_SIZE - 1 - CONFIG_PHY_RAM_BASE_ADDRESS,
-		BOOTMEM_DEFAULT);
-}
-
-#define EBSZ_TO_MEG(ebsz) \
-({ \
-	int meg = 0; \
-	switch (ebsz & 0xf) { \
-		case 0x1: meg =  16; break; \
-		case 0x3: meg =  32; break; \
-		case 0x5: meg =  64; break; \
-		case 0x7: meg = 128; break; \
-		case 0x9: meg = 256; break; \
-		case 0xb: meg = 512; break; \
-	} \
-	meg; \
-})
-static inline int __init get_mem_size(void)
-{
-#if defined(EBIU_SDBCTL)
-# if defined(BF561_FAMILY)
-	int ret = 0;
-	u32 sdbctl = bfin_read_EBIU_SDBCTL();
-	ret += EBSZ_TO_MEG(sdbctl >>  0);
-	ret += EBSZ_TO_MEG(sdbctl >>  8);
-	ret += EBSZ_TO_MEG(sdbctl >> 16);
-	ret += EBSZ_TO_MEG(sdbctl >> 24);
-	return ret;
-# else
-	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-# endif
-#elif defined(EBIU_DDRCTL1)
-	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
-	int ret = 0;
-	switch (ddrctl & 0xc0000) {
-	case DEVSZ_64:
-		ret = 64 / 8;
-		break;
-	case DEVSZ_128:
-		ret = 128 / 8;
-		break;
-	case DEVSZ_256:
-		ret = 256 / 8;
-		break;
-	case DEVSZ_512:
-		ret = 512 / 8;
-		break;
-	}
-	switch (ddrctl & 0x30000) {
-	case DEVWD_4:
-		ret *= 2;
-	case DEVWD_8:
-		ret *= 2;
-	case DEVWD_16:
-		break;
-	}
-	if ((ddrctl & 0xc000) == 0x4000)
-		ret *= 2;
-	return ret;
-#elif defined(CONFIG_BF60x)
-	u32 ddrctl = bfin_read_DMC0_CFG();
-	int ret;
-	switch (ddrctl & 0xf00) {
-	case DEVSZ_64:
-		ret = 64 / 8;
-		break;
-	case DEVSZ_128:
-		ret = 128 / 8;
-		break;
-	case DEVSZ_256:
-		ret = 256 / 8;
-		break;
-	case DEVSZ_512:
-		ret = 512 / 8;
-		break;
-	case DEVSZ_1G:
-		ret = 1024 / 8;
-		break;
-	case DEVSZ_2G:
-		ret = 2048 / 8;
-		break;
-	}
-	return ret;
-#endif
-	BUG();
-}
-
-__attribute__((weak))
-void __init native_machine_early_platform_add_devices(void)
-{
-}
-
-#ifdef CONFIG_BF60x
-static inline u_long bfin_get_clk(char *name)
-{
-	struct clk *clk;
-	u_long clk_rate;
-
-	clk = clk_get(NULL, name);
-	if (IS_ERR(clk))
-		return 0;
-
-	clk_rate = clk_get_rate(clk);
-	clk_put(clk);
-	return clk_rate;
-}
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
-	u32 mmr;
-	unsigned long sclk, cclk;
-
-	native_machine_early_platform_add_devices();
-
-	enable_shadow_console();
-
-	/* Check to make sure we are running on the right processor */
-	mmr =  bfin_cpuid();
-	if (unlikely(CPUID != bfin_cpuid()))
-		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
-			CPU, bfin_cpuid(), bfin_revid());
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_CMDLINE_BOOL)
-	strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
-	command_line[sizeof(command_line) - 1] = 0;
-#endif
-
-	/* Keep a copy of command line */
-	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	memset(&bfin_memmap, 0, sizeof(bfin_memmap));
-
-#ifdef CONFIG_BF60x
-	/* Should init clock device before parse command early */
-	clk_init();
-#endif
-	/* If the user does not specify things on the command line, use
-	 * what the bootloader set things up as
-	 */
-	physical_mem_end = 0;
-	parse_cmdline_early(&command_line[0]);
-
-	if (_ramend == 0)
-		_ramend = get_mem_size() * 1024 * 1024;
-
-	if (physical_mem_end == 0)
-		physical_mem_end = _ramend;
-
-	memory_setup();
-
-#ifndef CONFIG_BF60x
-	/* Initialize Async memory banks */
-	bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
-	bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
-	bfin_write_EBIU_AMGCTL(AMGCTLVAL);
-#ifdef CONFIG_EBIU_MBSCTLVAL
-	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
-	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
-	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
-#endif
-#endif
-#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
-	bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15);
-	bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15);
-	bfin_write_PORTH_HYSTERESIS(HYST_PORTH_0_15);
-	bfin_write_MISCPORT_HYSTERESIS((bfin_read_MISCPORT_HYSTERESIS() &
-					~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
-#endif
-
-	cclk = get_cclk();
-	sclk = get_sclk();
-
-	if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
-		panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
-
-#ifdef BF561_FAMILY
-	if (ANOMALY_05000266) {
-		bfin_read_IMDMA_D0_IRQ_STATUS();
-		bfin_read_IMDMA_D1_IRQ_STATUS();
-	}
-#endif
-
-	mmr = bfin_read_TBUFCTL();
-	printk(KERN_INFO "Hardware Trace %s and %sabled\n",
-		(mmr & 0x1) ? "active" : "off",
-		(mmr & 0x2) ? "en" : "dis");
-#ifndef CONFIG_BF60x
-	mmr = bfin_read_SYSCR();
-	printk(KERN_INFO "Boot Mode: %i\n", mmr & 0xF);
-
-	/* Newer parts mirror SWRST bits in SYSCR */
-#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
-    defined(CONFIG_BF538) || defined(CONFIG_BF539)
-	_bfin_swrst = bfin_read_SWRST();
-#else
-	/* Clear boot mode field */
-	_bfin_swrst = mmr & ~0xf;
-#endif
-
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
-	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
-#endif
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
-	bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
-#endif
-
-#ifdef CONFIG_SMP
-	if (_bfin_swrst & SWRST_DBL_FAULT_A) {
-#else
-	if (_bfin_swrst & RESET_DOUBLE) {
-#endif
-		printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
-#ifdef CONFIG_DEBUG_DOUBLEFAULT
-		/* We assume the crashing kernel, and the current symbol table match */
-		printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n",
-			initial_pda.seqstat_doublefault & SEQSTAT_EXCAUSE,
-			initial_pda.retx_doublefault);
-		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n",
-			initial_pda.dcplb_doublefault_addr);
-		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n",
-			initial_pda.icplb_doublefault_addr);
-#endif
-		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
-			initial_pda.retx);
-	} else if (_bfin_swrst & RESET_WDOG)
-		printk(KERN_INFO "Recovering from Watchdog event\n");
-	else if (_bfin_swrst & RESET_SOFTWARE)
-		printk(KERN_NOTICE "Reset caused by Software reset\n");
-#endif
-	printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
-	if (bfin_compiled_revid() == 0xffff)
-		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
-	else if (bfin_compiled_revid() == -1)
-		printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
-	else
-		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
-
-	if (likely(CPUID == bfin_cpuid())) {
-		if (bfin_revid() != bfin_compiled_revid()) {
-			if (bfin_compiled_revid() == -1)
-				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
-				       bfin_revid());
-			else if (bfin_compiled_revid() != 0xffff) {
-				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
-				       bfin_compiled_revid(), bfin_revid());
-				if (bfin_compiled_revid() > bfin_revid())
-					panic("Error: you are missing anomaly workarounds for this rev");
-			}
-		}
-		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
-			printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
-			       CPU, bfin_revid());
-	}
-
-	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
-
-#ifdef CONFIG_BF60x
-	printk(KERN_INFO "Processor Speed: %lu MHz core clock, %lu MHz SCLk, %lu MHz SCLK0, %lu MHz SCLK1 and %lu MHz DCLK\n",
-		cclk / 1000000, bfin_get_clk("SYSCLK") / 1000000, get_sclk0() / 1000000, get_sclk1() / 1000000, get_dclk() / 1000000);
-#else
-	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
-	       cclk / 1000000, sclk / 1000000);
-#endif
-
-	setup_bootmem_allocator();
-
-	paging_init();
-
-	/* Copy atomic sequences to their fixed location, and sanity check that
-	   these locations are the ones that we advertise to userspace.  */
-	memcpy((void *)FIXED_CODE_START, &fixed_code_start,
-	       FIXED_CODE_END - FIXED_CODE_START);
-	BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
-	       != SIGRETURN_STUB - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
-	       != ATOMIC_XCHG32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
-	       != ATOMIC_CAS32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
-	       != ATOMIC_ADD32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
-	       != ATOMIC_SUB32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
-	       != ATOMIC_IOR32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
-	       != ATOMIC_AND32 - FIXED_CODE_START);
-	BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
-	       != ATOMIC_XOR32 - FIXED_CODE_START);
-	BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
-		!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
-
-#ifdef CONFIG_SMP
-	platform_init_cpus();
-#endif
-	init_exception_vectors();
-	bfin_cache_init();	/* Initialize caches for the boot CPU */
-#ifdef CONFIG_SCB_PRIORITY
-	init_scb();
-#endif
-}
-
-static int __init topology_init(void)
-{
-	unsigned int cpu;
-
-	for_each_possible_cpu(cpu) {
-		register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
-	}
-
-	return 0;
-}
-
-subsys_initcall(topology_init);
-
-/* Get the input clock frequency */
-static u_long cached_clkin_hz = CONFIG_CLKIN_HZ;
-#ifndef CONFIG_BF60x
-static u_long get_clkin_hz(void)
-{
-	return cached_clkin_hz;
-}
-#endif
-static int __init early_init_clkin_hz(char *buf)
-{
-	cached_clkin_hz = simple_strtoul(buf, NULL, 0);
-#ifdef BFIN_KERNEL_CLOCK
-	if (cached_clkin_hz != CONFIG_CLKIN_HZ)
-		panic("cannot change clkin_hz when reprogramming clocks");
-#endif
-	return 1;
-}
-early_param("clkin_hz=", early_init_clkin_hz);
-
-#ifndef CONFIG_BF60x
-/* Get the voltage input multiplier */
-static u_long get_vco(void)
-{
-	static u_long cached_vco;
-	u_long msel, pll_ctl;
-
-	/* The assumption here is that VCO never changes at runtime.
-	 * If, someday, we support that, then we'll have to change this.
-	 */
-	if (cached_vco)
-		return cached_vco;
-
-	pll_ctl = bfin_read_PLL_CTL();
-	msel = (pll_ctl >> 9) & 0x3F;
-	if (0 == msel)
-		msel = 64;
-
-	cached_vco = get_clkin_hz();
-	cached_vco >>= (1 & pll_ctl);	/* DF bit */
-	cached_vco *= msel;
-	return cached_vco;
-}
-#endif
-
-/* Get the Core clock */
-u_long get_cclk(void)
-{
-#ifdef CONFIG_BF60x
-	return bfin_get_clk("CCLK");
-#else
-	static u_long cached_cclk_pll_div, cached_cclk;
-	u_long csel, ssel;
-
-	if (bfin_read_PLL_STAT() & 0x1)
-		return get_clkin_hz();
-
-	ssel = bfin_read_PLL_DIV();
-	if (ssel == cached_cclk_pll_div)
-		return cached_cclk;
-	else
-		cached_cclk_pll_div = ssel;
-
-	csel = ((ssel >> 4) & 0x03);
-	ssel &= 0xf;
-	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		cached_cclk = get_vco() / ssel;
-	else
-		cached_cclk = get_vco() >> csel;
-	return cached_cclk;
-#endif
-}
-EXPORT_SYMBOL(get_cclk);
-
-#ifdef CONFIG_BF60x
-/* Get the bf60x clock of SCLK0 domain */
-u_long get_sclk0(void)
-{
-	return bfin_get_clk("SCLK0");
-}
-EXPORT_SYMBOL(get_sclk0);
-
-/* Get the bf60x clock of SCLK1 domain */
-u_long get_sclk1(void)
-{
-	return bfin_get_clk("SCLK1");
-}
-EXPORT_SYMBOL(get_sclk1);
-
-/* Get the bf60x DRAM clock */
-u_long get_dclk(void)
-{
-	return bfin_get_clk("DCLK");
-}
-EXPORT_SYMBOL(get_dclk);
-#endif
-
-/* Get the default system clock */
-u_long get_sclk(void)
-{
-#ifdef CONFIG_BF60x
-	return get_sclk0();
-#else
-	static u_long cached_sclk;
-	u_long ssel;
-
-	/* The assumption here is that SCLK never changes at runtime.
-	 * If, someday, we support that, then we'll have to change this.
-	 */
-	if (cached_sclk)
-		return cached_sclk;
-
-	if (bfin_read_PLL_STAT() & 0x1)
-		return get_clkin_hz();
-
-	ssel = bfin_read_PLL_DIV() & 0xf;
-	if (0 == ssel) {
-		printk(KERN_WARNING "Invalid System Clock\n");
-		ssel = 1;
-	}
-
-	cached_sclk = get_vco() / ssel;
-	return cached_sclk;
-#endif
-}
-EXPORT_SYMBOL(get_sclk);
-
-unsigned long sclk_to_usecs(unsigned long sclk)
-{
-	u64 tmp = USEC_PER_SEC * (u64)sclk;
-	do_div(tmp, get_sclk());
-	return tmp;
-}
-EXPORT_SYMBOL(sclk_to_usecs);
-
-unsigned long usecs_to_sclk(unsigned long usecs)
-{
-	u64 tmp = get_sclk() * (u64)usecs;
-	do_div(tmp, USEC_PER_SEC);
-	return tmp;
-}
-EXPORT_SYMBOL(usecs_to_sclk);
-
-/*
- *	Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	char *cpu, *mmu, *fpu, *vendor, *cache;
-	uint32_t revid;
-	int cpu_num = *(unsigned int *)v;
-	u_long sclk, cclk;
-	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
-	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num);
-
-	cpu = CPU;
-	mmu = "none";
-	fpu = "none";
-	revid = bfin_revid();
-
-	sclk = get_sclk();
-	cclk = get_cclk();
-
-	switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
-	case 0xca:
-		vendor = "Analog Devices";
-		break;
-	default:
-		vendor = "unknown";
-		break;
-	}
-
-	seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor);
-
-	if (CPUID == bfin_cpuid())
-		seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
-	else
-		seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
-			CPUID, bfin_cpuid());
-
-	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
-		"stepping\t: %d ",
-		cpu, cclk/1000000, sclk/1000000,
-#ifdef CONFIG_MPU
-		"mpu on",
-#else
-		"mpu off",
-#endif
-		revid);
-
-	if (bfin_revid() != bfin_compiled_revid()) {
-		if (bfin_compiled_revid() == -1)
-			seq_printf(m, "(Compiled for Rev none)");
-		else if (bfin_compiled_revid() == 0xffff)
-			seq_printf(m, "(Compiled for Rev any)");
-		else
-			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
-	}
-
-	seq_printf(m, "\ncpu MHz\t\t: %lu.%06lu/%lu.%06lu\n",
-		cclk/1000000, cclk%1000000,
-		sclk/1000000, sclk%1000000);
-	seq_printf(m, "bogomips\t: %lu.%02lu\n"
-		"Calibration\t: %lu loops\n",
-		(loops_per_jiffy * HZ) / 500000,
-		((loops_per_jiffy * HZ) / 5000) % 100,
-		(loops_per_jiffy * HZ));
-
-	/* Check Cache configutation */
-	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
-	case ACACHE_BSRAM:
-		cache = "dbank-A/B\t: cache/sram";
-		dcache_size = 16;
-		dsup_banks = 1;
-		break;
-	case ACACHE_BCACHE:
-		cache = "dbank-A/B\t: cache/cache";
-		dcache_size = 32;
-		dsup_banks = 2;
-		break;
-	case ASRAM_BSRAM:
-		cache = "dbank-A/B\t: sram/sram";
-		dcache_size = 0;
-		dsup_banks = 0;
-		break;
-	default:
-		cache = "unknown";
-		dcache_size = 0;
-		dsup_banks = 0;
-		break;
-	}
-
-	/* Is it turned on? */
-	if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
-		dcache_size = 0;
-
-	if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB))
-		icache_size = 0;
-
-	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache) %d KB(L2 cache)\n",
-		icache_size, dcache_size, 0);
-	seq_printf(m, "%s\n", cache);
-	seq_printf(m, "external memory\t: "
-#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
-		   "cacheable"
-#else
-		   "uncacheable"
-#endif
-		   " in instruction cache\n");
-	seq_printf(m, "external memory\t: "
-#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
-		      "cacheable (write-back)"
-#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
-		      "cacheable (write-through)"
-#else
-		      "uncacheable"
-#endif
-		      " in data cache\n");
-
-	if (icache_size)
-		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
-	else
-		seq_printf(m, "icache setup\t: off\n");
-
-	seq_printf(m,
-		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
-		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
-		   BFIN_DLINES);
-#ifdef __ARCH_SYNC_CORE_DCACHE
-	seq_printf(m, "dcache flushes\t: %lu\n", dcache_invld_count[cpu_num]);
-#endif
-#ifdef __ARCH_SYNC_CORE_ICACHE
-	seq_printf(m, "icache flushes\t: %lu\n", icache_invld_count[cpu_num]);
-#endif
-
-	seq_printf(m, "\n");
-
-	if (cpu_num != num_possible_cpus() - 1)
-		return 0;
-
-	if (L2_LENGTH) {
-		seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
-		seq_printf(m, "L2 SRAM\t\t: "
-#if defined(CONFIG_BFIN_L2_ICACHEABLE)
-			      "cacheable"
-#else
-			      "uncacheable"
-#endif
-			      " in instruction cache\n");
-		seq_printf(m, "L2 SRAM\t\t: "
-#if defined(CONFIG_BFIN_L2_WRITEBACK)
-			      "cacheable (write-back)"
-#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
-			      "cacheable (write-through)"
-#else
-			      "uncacheable"
-#endif
-			      " in data cache\n");
-	}
-	seq_printf(m, "board name\t: %s\n", bfin_board_name);
-	seq_printf(m, "board memory\t: %ld kB (0x%08lx -> 0x%08lx)\n",
-		physical_mem_end >> 10, 0ul, physical_mem_end);
-	seq_printf(m, "kernel memory\t: %d kB (0x%08lx -> 0x%08lx)\n",
-		((int)memory_end - (int)_rambase) >> 10,
-		_rambase, memory_end);
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	if (*pos == 0)
-		*pos = cpumask_first(cpu_online_mask);
-	if (*pos >= num_online_cpus())
-		return NULL;
-
-	return pos;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	*pos = cpumask_next(*pos, cpu_online_mask);
-
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start = c_start,
-	.next = c_next,
-	.stop = c_stop,
-	.show = show_cpuinfo,
-};
-
-void __init cmdline_init(const char *r0)
-{
-	early_shadow_stamp();
-	if (r0)
-		strlcpy(command_line, r0, COMMAND_LINE_SIZE);
-}
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
deleted file mode 100644
index aeb8343eeb03..000000000000
--- a/arch/blackfin/kernel/shadow_console.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * manage a small early shadow of the log buffer which we can pass between the
- * bootloader so early crash messages are communicated properly and easily
- *
- * Copyright 2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/string.h>
-#include <asm/blackfin.h>
-#include <asm/irq_handler.h>
-#include <asm/early_printk.h>
-
-#define SHADOW_CONSOLE_START		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x500)
-#define SHADOW_CONSOLE_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x1000)
-#define SHADOW_CONSOLE_MAGIC_LOC	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x4F0)
-#define SHADOW_CONSOLE_MAGIC		(0xDEADBEEF)
-
-static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START;
-
-__init void early_shadow_write(struct console *con, const char *s,
-				unsigned int n)
-{
-	unsigned int i;
-	/*
-	 * save 2 bytes for the double null at the end
-	 * once we fail on a long line, make sure we don't write a short line afterwards
-	 */
-	if ((shadow_console_buffer + n) <= (char *)(SHADOW_CONSOLE_END - 2)) {
-		/* can't use memcpy - it may not be relocated yet */
-		for (i = 0; i <= n; i++)
-			shadow_console_buffer[i] = s[i];
-		shadow_console_buffer += n;
-		shadow_console_buffer[0] = 0;
-		shadow_console_buffer[1] = 0;
-	} else
-		shadow_console_buffer = (char *)SHADOW_CONSOLE_END;
-}
-
-static __initdata struct console early_shadow_console = {
-	.name = "early_shadow",
-	.write = early_shadow_write,
-	.flags = CON_BOOT | CON_PRINTBUFFER,
-	.index = -1,
-	.device = 0,
-};
-
-__init int shadow_console_enabled(void)
-{
-	return early_shadow_console.flags & CON_ENABLED;
-}
-
-__init void mark_shadow_error(void)
-{
-	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
-	loc[0] = SHADOW_CONSOLE_MAGIC;
-	loc[1] = SHADOW_CONSOLE_START;
-}
-
-__init void enable_shadow_console(void)
-{
-	if (!shadow_console_enabled()) {
-		register_console(&early_shadow_console);
-		/* for now, assume things are going to fail */
-		mark_shadow_error();
-	}
-}
-
-static __init int disable_shadow_console(void)
-{
-	/*
-	 * by the time pure_initcall runs, the standard console is enabled,
-	 * and the early_console is off, so unset the magic numbers
-	 * unregistering the console is taken care of in common code (See
-	 * ./kernel/printk:disable_boot_consoles() )
-	 */
-	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
-
-	loc[0] = 0;
-
-	return 0;
-}
-pure_initcall(disable_shadow_console);
-
-/*
- * since we can't use printk, dump numbers (as hex), n = # bits
- */
-__init void early_shadow_reg(unsigned long reg, unsigned int n)
-{
-	/*
-	 * can't use any "normal" kernel features, since thay
-	 * may not be relocated to their execute address yet
-	 */
-	int i;
-	char ascii[11] = " 0x";
-
-	n = n / 4;
-	reg = reg << ((8 - n) * 4);
-	n += 3;
-
-	for (i = 3; i <= n ; i++) {
-		ascii[i] = hex_asc_lo(reg >> 28);
-		reg <<= 4;
-	}
-	early_shadow_write(NULL, ascii, n);
-
-}
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
deleted file mode 100644
index 5f5172779204..000000000000
--- a/arch/blackfin/kernel/signal.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/ptrace.h>
-#include <linux/tty.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/uaccess.h>
-#include <linux/tracehook.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-#include <asm/fixed_code.h>
-#include <asm/syscall.h>
-
-/* Location of the trace bit in SYSCFG. */
-#define TRACE_BITS 0x0001
-
-struct fdpic_func_descriptor {
-	unsigned long	text;
-	unsigned long	GOT;
-};
-
-struct rt_sigframe {
-	int sig;
-	struct siginfo *pinfo;
-	void *puc;
-	/* This is no longer needed by the kernel, but unfortunately userspace
-	 * code expects it to be there.  */
-	char retcode[8];
-	struct siginfo info;
-	struct ucontext uc;
-};
-
-static inline int
-rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0)
-{
-	unsigned long usp = 0;
-	int err = 0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-#define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
-
-	/* restore passed registers */
-	RESTORE(r0); RESTORE(r1); RESTORE(r2); RESTORE(r3);
-	RESTORE(r4); RESTORE(r5); RESTORE(r6); RESTORE(r7);
-	RESTORE(p0); RESTORE(p1); RESTORE(p2); RESTORE(p3);
-	RESTORE(p4); RESTORE(p5);
-	err |= __get_user(usp, &sc->sc_usp);
-	wrusp(usp);
-	RESTORE(a0w); RESTORE(a1w);
-	RESTORE(a0x); RESTORE(a1x);
-	RESTORE(astat);
-	RESTORE(rets);
-	RESTORE(pc);
-	RESTORE(retx);
-	RESTORE(fp);
-	RESTORE(i0); RESTORE(i1); RESTORE(i2); RESTORE(i3);
-	RESTORE(m0); RESTORE(m1); RESTORE(m2); RESTORE(m3);
-	RESTORE(l0); RESTORE(l1); RESTORE(l2); RESTORE(l3);
-	RESTORE(b0); RESTORE(b1); RESTORE(b2); RESTORE(b3);
-	RESTORE(lc0); RESTORE(lc1);
-	RESTORE(lt0); RESTORE(lt1);
-	RESTORE(lb0); RESTORE(lb1);
-	RESTORE(seqstat);
-
-	regs->orig_p0 = -1;	/* disable syscall checks */
-
-	*pr0 = regs->r0;
-	return err;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
-	struct pt_regs *regs = current_pt_regs();
-	unsigned long usp = rdusp();
-	struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
-	sigset_t set;
-	int r0;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
-		goto badframe;
-
-	if (restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return r0;
-
- badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs)
-{
-	int err = 0;
-
-#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x)
-
-	SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3);
-	SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7);
-	SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3);
-	SETUP(p4); SETUP(p5);
-	err |= __put_user(rdusp(), &sc->sc_usp);
-	SETUP(a0w); SETUP(a1w);
-	SETUP(a0x); SETUP(a1x);
-	SETUP(astat);
-	SETUP(rets);
-	SETUP(pc);
-	SETUP(retx);
-	SETUP(fp);
-	SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3);
-	SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3);
-	SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3);
-	SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3);
-	SETUP(lc0); SETUP(lc1);
-	SETUP(lt0); SETUP(lt1);
-	SETUP(lb0); SETUP(lb1);
-	SETUP(seqstat);
-
-	return err;
-}
-
-static inline void *get_sigframe(struct ksignal *ksig,
-				 size_t frame_size)
-{
-	unsigned long usp = sigsp(rdusp(), ksig);
-
-	return (void *)((usp - frame_size) & -8UL);
-}
-
-static int
-setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-
-	frame = get_sigframe(ksig, sizeof(*frame));
-
-	err |= __put_user(ksig->sig, &frame->sig);
-
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __save_altstack(&frame->uc.uc_stack, rdusp());
-	err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs);
-	err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	if (err)
-		return -EFAULT;
-
-	/* Set up registers for signal handler */
-	if (current->personality & FDPIC_FUNCPTRS) {
-		struct fdpic_func_descriptor __user *funcptr =
-			(struct fdpic_func_descriptor *) ksig->ka.sa.sa_handler;
-		u32 pc, p3;
-		err |= __get_user(pc, &funcptr->text);
-		err |= __get_user(p3, &funcptr->GOT);
-		if (err)
-			return -EFAULT;
-		regs->pc = pc;
-		regs->p3 = p3;
-	} else
-		regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-	wrusp((unsigned long)frame);
-	regs->rets = SIGRETURN_STUB;
-
-	regs->r0 = frame->sig;
-	regs->r1 = (unsigned long)(&frame->info);
-	regs->r2 = (unsigned long)(&frame->uc);
-
-	return 0;
-}
-
-static inline void
-handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-{
-	switch (regs->r0) {
-	case -ERESTARTNOHAND:
-		if (!has_handler)
-			goto do_restart;
-		regs->r0 = -EINTR;
-		break;
-
-	case -ERESTARTSYS:
-		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-			regs->r0 = -EINTR;
-			break;
-		}
-		/* fallthrough */
-	case -ERESTARTNOINTR:
- do_restart:
-		regs->p0 = regs->orig_p0;
-		regs->r0 = regs->orig_r0;
-		regs->pc -= 2;
-		break;
-
-	case -ERESTART_RESTARTBLOCK:
-		regs->p0 = __NR_restart_syscall;
-		regs->pc -= 2;
-		break;
-	}
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs)
-{
-	int ret;
-
-	/* are we from a system call? to see pt_regs->orig_p0 */
-	if (regs->orig_p0 >= 0)
-		/* If so, check system call restarting.. */
-		handle_restart(regs, &ksig->ka, 1);
-
-	/* set up the stack frame */
-	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
-
-	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals
- * that the kernel can handle, and then we build all the user-level signal
- * handling stack-frames in one go after that.
- */
-asmlinkage void do_signal(struct pt_regs *regs)
-{
-	struct ksignal ksig;
-
-	current->thread.esp0 = (unsigned long)regs;
-
-	if (get_signal(&ksig)) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(&ksig, regs);
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if (regs->orig_p0 >= 0)
-		/* Restart the system call - no handlers present */
-		handle_restart(regs, NULL, 0);
-
-	/* if there's no signal to deliver, we just put the saved sigmask
-	 * back */
-	restore_saved_sigmask();
-}
-
-/*
- * notification of userspace execution resumption
- */
-asmlinkage void do_notify_resume(struct pt_regs *regs)
-{
-	if (test_thread_flag(TIF_SIGPENDING))
-		do_signal(regs);
-
-	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-}
-
diff --git a/arch/blackfin/kernel/stacktrace.c b/arch/blackfin/kernel/stacktrace.c
deleted file mode 100644
index 17198f3650b6..000000000000
--- a/arch/blackfin/kernel/stacktrace.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Blackfin stacktrace code (mostly copied from avr32)
- *
- * Copyright 2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/stacktrace.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-
-register unsigned long current_frame_pointer asm("FP");
-
-struct stackframe {
-	unsigned long fp;
-	unsigned long rets;
-};
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- */
-void save_stack_trace(struct stack_trace *trace)
-{
-	unsigned long low, high;
-	unsigned long fp;
-	struct stackframe *frame;
-	int skip = trace->skip;
-
-	low = (unsigned long)task_stack_page(current);
-	high = low + THREAD_SIZE;
-	fp = current_frame_pointer;
-
-	while (fp >= low && fp <= (high - sizeof(*frame))) {
-		frame = (struct stackframe *)fp;
-
-		if (skip) {
-			skip--;
-		} else {
-			trace->entries[trace->nr_entries++] = frame->rets;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-
-		/*
-		 * The next frame must be at a higher address than the
-		 * current frame.
-		 */
-		low = fp + sizeof(*frame);
-		fp = frame->fp;
-	}
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
deleted file mode 100644
index d998383cb956..000000000000
--- a/arch/blackfin/kernel/sys_bfin.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * contains various random system calls that have a non-standard
- * calling sequence on the Linux/Blackfin platform.
- *
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/spinlock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
-#include <linux/ipc.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/cachectl.h>
-#include <asm/ptrace.h>
-
-asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
-{
-	return sram_alloc_with_lsl(size, flags);
-}
-
-asmlinkage int sys_sram_free(const void *addr)
-{
-	return sram_free_with_lsl(addr);
-}
-
-asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
-{
-	return safe_dma_memcpy(dest, src, len);
-}
-
-#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
-#include <linux/fb.h>
-#include <linux/export.h>
-unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
-	unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct fb_info *info = filp->private_data;
-	return (unsigned long)info->screen_base;
-}
-EXPORT_SYMBOL(get_fb_unmapped_area);
-#endif
-
-/* Needed for legacy userspace atomic emulation */
-static DEFINE_SPINLOCK(bfin_spinlock_lock);
-
-#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
-__attribute__((l1_text))
-#endif
-asmlinkage int sys_bfin_spinlock(int *p)
-{
-	int ret, tmp = 0;
-
-	spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
-	ret = get_user(tmp, p);
-	if (likely(ret == 0)) {
-		if (unlikely(tmp))
-			ret = 1;
-		else
-			put_user(1, p);
-	}
-	spin_unlock(&bfin_spinlock_lock);
-
-	return ret;
-}
-
-SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len, int, op)
-{
-	if (is_user_addr_valid(current, addr, len) != 0)
-		return -EINVAL;
-
-	if (op & DCACHE)
-		blackfin_dcache_flush_range(addr, addr + len);
-	if (op & ICACHE)
-		blackfin_icache_flush_range(addr, addr + len);
-
-	return 0;
-}
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
deleted file mode 100644
index 01350557fbd7..000000000000
--- a/arch/blackfin/kernel/time-ts.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * Based on arm clockevents implementation and old bfin time tick.
- *
- * Copyright 2008-2009 Analog Devics Inc.
- *                2008 GeoTechnologies
- *                     Vitja Makarov
- *
- * Licensed under the GPL-2
- */
-
-#include <linux/module.h>
-#include <linux/profile.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cpufreq.h>
-
-#include <asm/blackfin.h>
-#include <asm/time.h>
-#include <asm/gptimers.h>
-#include <asm/nmi.h>
-
-
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-
-static notrace u64 bfin_read_cycles(struct clocksource *cs)
-{
-#ifdef CONFIG_CPU_FREQ
-	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
-#else
-	return get_cycles();
-#endif
-}
-
-static struct clocksource bfin_cs_cycles = {
-	.name		= "bfin_cs_cycles",
-	.rating		= 400,
-	.read		= bfin_read_cycles,
-	.mask		= CLOCKSOURCE_MASK(64),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static inline unsigned long long bfin_cs_cycles_sched_clock(void)
-{
-	return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles),
-		bfin_cs_cycles.mult, bfin_cs_cycles.shift);
-}
-
-static int __init bfin_cs_cycles_init(void)
-{
-	if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
-		panic("failed to register clocksource");
-
-	return 0;
-}
-#else
-# define bfin_cs_cycles_init()
-#endif
-
-#ifdef CONFIG_GPTMR0_CLOCKSOURCE
-
-void __init setup_gptimer0(void)
-{
-	disable_gptimers(TIMER0bit);
-
-#ifdef CONFIG_BF60x
-	bfin_write16(TIMER_DATA_IMSK, 0);
-	set_gptimer_config(TIMER0_id,  TIMER_OUT_DIS
-		| TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
-#else
-	set_gptimer_config(TIMER0_id, \
-		TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
-#endif
-	set_gptimer_period(TIMER0_id, -1);
-	set_gptimer_pwidth(TIMER0_id, -2);
-	SSYNC();
-	enable_gptimers(TIMER0bit);
-}
-
-static u64 bfin_read_gptimer0(struct clocksource *cs)
-{
-	return bfin_read_TIMER0_COUNTER();
-}
-
-static struct clocksource bfin_cs_gptimer0 = {
-	.name		= "bfin_cs_gptimer0",
-	.rating		= 350,
-	.read		= bfin_read_gptimer0,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static inline unsigned long long bfin_cs_gptimer0_sched_clock(void)
-{
-	return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(),
-		bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift);
-}
-
-static int __init bfin_cs_gptimer0_init(void)
-{
-	setup_gptimer0();
-
-	if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
-		panic("failed to register clocksource");
-
-	return 0;
-}
-#else
-# define bfin_cs_gptimer0_init()
-#endif
-
-#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
-/* prefer to use cycles since it has higher rating */
-notrace unsigned long long sched_clock(void)
-{
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-	return bfin_cs_cycles_sched_clock();
-#else
-	return bfin_cs_gptimer0_sched_clock();
-#endif
-}
-#endif
-
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-static int bfin_gptmr0_set_next_event(unsigned long cycles,
-                                     struct clock_event_device *evt)
-{
-	disable_gptimers(TIMER0bit);
-
-	/* it starts counting three SCLK cycles after the TIMENx bit is set */
-	set_gptimer_pwidth(TIMER0_id, cycles - 3);
-	enable_gptimers(TIMER0bit);
-	return 0;
-}
-
-static int bfin_gptmr0_set_periodic(struct clock_event_device *evt)
-{
-#ifndef CONFIG_BF60x
-	set_gptimer_config(TIMER0_id,
-			   TIMER_OUT_DIS | TIMER_IRQ_ENA |
-			   TIMER_PERIOD_CNT | TIMER_MODE_PWM);
-#else
-	set_gptimer_config(TIMER0_id,
-			   TIMER_OUT_DIS | TIMER_MODE_PWM_CONT |
-			   TIMER_PULSE_HI | TIMER_IRQ_PER);
-#endif
-
-	set_gptimer_period(TIMER0_id, get_sclk() / HZ);
-	set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
-	enable_gptimers(TIMER0bit);
-	return 0;
-}
-
-static int bfin_gptmr0_set_oneshot(struct clock_event_device *evt)
-{
-	disable_gptimers(TIMER0bit);
-#ifndef CONFIG_BF60x
-	set_gptimer_config(TIMER0_id,
-			   TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
-#else
-	set_gptimer_config(TIMER0_id,
-			   TIMER_OUT_DIS | TIMER_MODE_PWM | TIMER_PULSE_HI |
-			   TIMER_IRQ_WID_DLY);
-#endif
-
-	set_gptimer_period(TIMER0_id, 0);
-	return 0;
-}
-
-static int bfin_gptmr0_shutdown(struct clock_event_device *evt)
-{
-	disable_gptimers(TIMER0bit);
-	return 0;
-}
-
-static void bfin_gptmr0_ack(void)
-{
-	clear_gptimer_intr(TIMER0_id);
-}
-
-static void __init bfin_gptmr0_init(void)
-{
-	disable_gptimers(TIMER0bit);
-}
-
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	smp_mb();
-	/*
-	 * We want to ACK before we handle so that we can handle smaller timer
-	 * intervals.  This way if the timer expires again while we're handling
-	 * things, we're more likely to see that 2nd int rather than swallowing
-	 * it by ACKing the int at the end of this handler.
-	 */
-	bfin_gptmr0_ack();
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction gptmr0_irq = {
-	.name		= "Blackfin GPTimer0",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU,
-	.handler	= bfin_gptmr0_interrupt,
-};
-
-static struct clock_event_device clockevent_gptmr0 = {
-	.name			= "bfin_gptimer0",
-	.rating			= 300,
-	.irq			= IRQ_TIMER0,
-	.shift			= 32,
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event		= bfin_gptmr0_set_next_event,
-	.set_state_shutdown	= bfin_gptmr0_shutdown,
-	.set_state_periodic	= bfin_gptmr0_set_periodic,
-	.set_state_oneshot	= bfin_gptmr0_set_oneshot,
-};
-
-static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
-{
-	unsigned long clock_tick;
-
-	clock_tick = get_sclk();
-	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
-	evt->max_delta_ticks = (unsigned long)-1;
-	evt->min_delta_ns = clockevent_delta2ns(100, evt);
-	evt->min_delta_ticks = 100;
-
-	evt->cpumask = cpumask_of(0);
-
-	clockevents_register_device(evt);
-}
-#endif /* CONFIG_TICKSOURCE_GPTMR0 */
-
-#if defined(CONFIG_TICKSOURCE_CORETMR)
-/* per-cpu local core timer */
-DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
-
-static int bfin_coretmr_set_next_event(unsigned long cycles,
-				struct clock_event_device *evt)
-{
-	bfin_write_TCNTL(TMPWR);
-	CSYNC();
-	bfin_write_TCOUNT(cycles);
-	CSYNC();
-	bfin_write_TCNTL(TMPWR | TMREN);
-	return 0;
-}
-
-static int bfin_coretmr_set_periodic(struct clock_event_device *evt)
-{
-	unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
-
-	bfin_write_TCNTL(TMPWR);
-	CSYNC();
-	bfin_write_TSCALE(TIME_SCALE - 1);
-	bfin_write_TPERIOD(tcount);
-	bfin_write_TCOUNT(tcount);
-	CSYNC();
-	bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
-	return 0;
-}
-
-static int bfin_coretmr_set_oneshot(struct clock_event_device *evt)
-{
-	bfin_write_TCNTL(TMPWR);
-	CSYNC();
-	bfin_write_TSCALE(TIME_SCALE - 1);
-	bfin_write_TPERIOD(0);
-	bfin_write_TCOUNT(0);
-	return 0;
-}
-
-static int bfin_coretmr_shutdown(struct clock_event_device *evt)
-{
-	bfin_write_TCNTL(0);
-	CSYNC();
-	return 0;
-}
-
-void bfin_coretmr_init(void)
-{
-	/* power up the timer, but don't enable it just yet */
-	bfin_write_TCNTL(TMPWR);
-	CSYNC();
-
-	/* the TSCALE prescaler counter. */
-	bfin_write_TSCALE(TIME_SCALE - 1);
-	bfin_write_TPERIOD(0);
-	bfin_write_TCOUNT(0);
-
-	CSYNC();
-}
-
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-
-irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
-
-	smp_mb();
-	evt->event_handler(evt);
-
-	touch_nmi_watchdog();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction coretmr_irq = {
-	.name		= "Blackfin CoreTimer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU,
-	.handler	= bfin_coretmr_interrupt,
-};
-
-void bfin_coretmr_clockevent_init(void)
-{
-	unsigned long clock_tick;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
-
-#ifdef CONFIG_SMP
-	evt->broadcast = smp_timer_broadcast;
-#endif
-
-	evt->name = "bfin_core_timer";
-	evt->rating = 350;
-	evt->irq = -1;
-	evt->shift = 32;
-	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->set_next_event = bfin_coretmr_set_next_event;
-	evt->set_state_shutdown = bfin_coretmr_shutdown;
-	evt->set_state_periodic = bfin_coretmr_set_periodic;
-	evt->set_state_oneshot = bfin_coretmr_set_oneshot;
-
-	clock_tick = get_cclk() / TIME_SCALE;
-	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
-	evt->max_delta_ticks = (unsigned long)-1;
-	evt->min_delta_ns = clockevent_delta2ns(100, evt);
-	evt->min_delta_ticks = 100;
-
-	evt->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(evt);
-}
-#endif /* CONFIG_TICKSOURCE_CORETMR */
-
-
-void read_persistent_clock(struct timespec *ts)
-{
-	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
-	ts->tv_sec = secs_since_1970;
-	ts->tv_nsec = 0;
-}
-
-void __init time_init(void)
-{
-
-#ifdef CONFIG_RTC_DRV_BFIN
-	/* [#2663] hack to filter junk RTC values that would cause
-	 * userspace to have to deal with time values greater than
-	 * 2^31 seconds (which uClibc cannot cope with yet)
-	 */
-	if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
-		printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
-		bfin_write_RTC_STAT(0);
-	}
-#endif
-
-	bfin_cs_cycles_init();
-	bfin_cs_gptimer0_init();
-
-#if defined(CONFIG_TICKSOURCE_CORETMR)
-	bfin_coretmr_init();
-	setup_irq(IRQ_CORETMR, &coretmr_irq);
-	bfin_coretmr_clockevent_init();
-#endif
-
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	bfin_gptmr0_init();
-	setup_irq(IRQ_TIMER0, &gptmr0_irq);
-	gptmr0_irq.dev_id = &clockevent_gptmr0;
-	bfin_gptmr0_clockevent_init(&clockevent_gptmr0);
-#endif
-
-#if !defined(CONFIG_TICKSOURCE_CORETMR) && !defined(CONFIG_TICKSOURCE_GPTMR0)
-# error at least one clock event device is required
-#endif
-}
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
deleted file mode 100644
index 3126b920a4a5..000000000000
--- a/arch/blackfin/kernel/time.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/blackfin/kernel/time.c
- *
- * This file contains the Blackfin-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * Copyright 2004-2008 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/profile.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include <asm/blackfin.h>
-#include <asm/time.h>
-#include <asm/gptimers.h>
-
-/* This is an NTP setting */
-#define	TICK_SIZE (tick_nsec / 1000)
-
-static struct irqaction bfin_timer_irq = {
-	.name = "Blackfin Timer Tick",
-};
-
-#if defined(CONFIG_IPIPE)
-void __init setup_system_timer0(void)
-{
-	/* Power down the core timer, just to play safe. */
-	bfin_write_TCNTL(0);
-
-	disable_gptimers(TIMER0bit);
-	set_gptimer_status(0, TIMER_STATUS_TRUN0);
-	while (get_gptimer_status(0) & TIMER_STATUS_TRUN0)
-		udelay(10);
-
-	set_gptimer_config(0, 0x59); /* IRQ enable, periodic, PWM_OUT, SCLKed, OUT PAD disabled */
-	set_gptimer_period(TIMER0_id, get_sclk() / HZ);
-	set_gptimer_pwidth(TIMER0_id, 1);
-	SSYNC();
-	enable_gptimers(TIMER0bit);
-}
-#else
-void __init setup_core_timer(void)
-{
-	u32 tcount;
-
-	/* power up the timer, but don't enable it just yet */
-	bfin_write_TCNTL(TMPWR);
-	CSYNC();
-
-	/* the TSCALE prescaler counter */
-	bfin_write_TSCALE(TIME_SCALE - 1);
-
-	tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
-	bfin_write_TPERIOD(tcount);
-	bfin_write_TCOUNT(tcount);
-
-	/* now enable the timer */
-	CSYNC();
-
-	bfin_write_TCNTL(TAUTORLD | TMREN | TMPWR);
-}
-#endif
-
-static void __init
-time_sched_init(irqreturn_t(*timer_routine) (int, void *))
-{
-#if defined(CONFIG_IPIPE)
-	setup_system_timer0();
-	bfin_timer_irq.handler = timer_routine;
-	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
-#else
-	setup_core_timer();
-	bfin_timer_irq.handler = timer_routine;
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
-#endif
-}
-
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-/*
- * Should return useconds since last timer tick
- */
-static u32 blackfin_gettimeoffset(void)
-{
-	unsigned long offset;
-	unsigned long clocks_per_jiffy;
-
-#if defined(CONFIG_IPIPE)
-	clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
-	offset = bfin_read_TIMER0_COUNTER() / \
-		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
-
-	if ((get_gptimer_status(0) & TIMER_STATUS_TIMIL0) && offset < (100000 / HZ / 2))
-		offset += (USEC_PER_SEC / HZ);
-#else
-	clocks_per_jiffy = bfin_read_TPERIOD();
-	offset = (clocks_per_jiffy - bfin_read_TCOUNT()) / \
-		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
-
-	/* Check if we just wrapped the counters and maybe missed a tick */
-	if ((bfin_read_ILAT() & (1 << IRQ_CORETMR))
-		&& (offset < (100000 / HZ / 2)))
-		offset += (USEC_PER_SEC / HZ);
-#endif
-	return offset;
-}
-#endif
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dummy)
-{
-	xtime_update(1);
-
-#ifdef CONFIG_IPIPE
-	update_root_process_times(get_irq_regs());
-#else
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-	profile_tick(CPU_PROFILING);
-
-	return IRQ_HANDLED;
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
-	ts->tv_sec = secs_since_1970;
-	ts->tv_nsec = 0;
-}
-
-void __init time_init(void)
-{
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	arch_gettimeoffset = blackfin_gettimeoffset;
-#endif
-
-#ifdef CONFIG_RTC_DRV_BFIN
-	/* [#2663] hack to filter junk RTC values that would cause
-	 * userspace to have to deal with time values greater than
-	 * 2^31 seconds (which uClibc cannot cope with yet)
-	 */
-	if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
-		printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
-		bfin_write_RTC_STAT(0);
-	}
-#endif
-
-	time_sched_init(timer_interrupt);
-}
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
deleted file mode 100644
index 151f22196ab6..000000000000
--- a/arch/blackfin/kernel/trace.c
+++ /dev/null
@@ -1,988 +0,0 @@
-/* provide some functions which dump the trace buffer, in a nice way for people
- * to read it, and understand what is going on
- *
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/kernel.h>
-#include <linux/hardirq.h>
-#include <linux/thread_info.h>
-#include <linux/mm.h>
-#include <linux/oom.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/uaccess.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/err.h>
-#include <linux/fs.h>
-#include <linux/irq.h>
-#include <asm/dma.h>
-#include <asm/trace.h>
-#include <asm/fixed_code.h>
-#include <asm/traps.h>
-#include <asm/irq_handler.h>
-#include <asm/pda.h>
-
-void decode_address(char *buf, unsigned long address)
-{
-	struct task_struct *p;
-	struct mm_struct *mm;
-	unsigned long offset;
-	struct rb_node *n;
-
-#ifdef CONFIG_KALLSYMS
-	unsigned long symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
-#endif
-
-	buf += sprintf(buf, "<0x%08lx> ", address);
-
-#ifdef CONFIG_KALLSYMS
-	/* look up the address and see if we are in kernel space */
-	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
-
-	if (symname) {
-		/* yeah! kernel space! */
-		if (!modname)
-			modname = delim = "";
-		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
-			delim, modname, delim, symname,
-			(unsigned long)offset);
-		return;
-	}
-#endif
-
-	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		/* Problem in fixed code section? */
-		strcat(buf, "/* Maybe fixed code section */");
-		return;
-
-	} else if (address < CONFIG_BOOT_LOAD) {
-		/* Problem somewhere before the kernel start address */
-		strcat(buf, "/* Maybe null pointer? */");
-		return;
-
-	} else if (address >= COREMMR_BASE) {
-		strcat(buf, "/* core mmrs */");
-		return;
-
-	} else if (address >= SYSMMR_BASE) {
-		strcat(buf, "/* system mmrs */");
-		return;
-
-	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
-		strcat(buf, "/* on-chip L1 ROM */");
-		return;
-
-	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
-		strcat(buf, "/* on-chip scratchpad */");
-		return;
-
-	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
-		strcat(buf, "/* unconnected memory */");
-		return;
-
-	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
-		strcat(buf, "/* reserved memory */");
-		return;
-
-	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
-		strcat(buf, "/* on-chip Data Bank A */");
-		return;
-
-	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
-		strcat(buf, "/* on-chip Data Bank B */");
-		return;
-	}
-
-	/*
-	 * Don't walk any of the vmas if we are oopsing, it has been known
-	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
-	 */
-	if (oops_in_progress) {
-		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
-		return;
-	}
-
-	/* looks like we're off in user-land, so let's walk all the
-	 * mappings of all our processes and see if we can't be a whee
-	 * bit more specific
-	 */
-	read_lock(&tasklist_lock);
-	for_each_process(p) {
-		struct task_struct *t;
-
-		t = find_lock_task_mm(p);
-		if (!t)
-			continue;
-
-		mm = t->mm;
-		if (!down_read_trylock(&mm->mmap_sem))
-			goto __continue;
-
-		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
-			struct vm_area_struct *vma;
-
-			vma = rb_entry(n, struct vm_area_struct, vm_rb);
-
-			if (address >= vma->vm_start && address < vma->vm_end) {
-				char _tmpbuf[256];
-				char *name = t->comm;
-				struct file *file = vma->vm_file;
-
-				if (file) {
-					char *d_name = file_path(file, _tmpbuf,
-						      sizeof(_tmpbuf));
-					if (!IS_ERR(d_name))
-						name = d_name;
-				}
-
-				/* FLAT does not have its text aligned to the start of
-				 * the map while FDPIC ELF does ...
-				 */
-
-				/* before we can check flat/fdpic, we need to
-				 * make sure current is valid
-				 */
-				if ((unsigned long)current >= FIXED_CODE_START &&
-				    !((unsigned long)current & 0x3)) {
-					if (current->mm &&
-					    (address > current->mm->start_code) &&
-					    (address < current->mm->end_code))
-						offset = address - current->mm->start_code;
-					else
-						offset = (address - vma->vm_start) +
-							 (vma->vm_pgoff << PAGE_SHIFT);
-
-					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
-				} else
-					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
-						name, vma->vm_start, vma->vm_end);
-
-				up_read(&mm->mmap_sem);
-				task_unlock(t);
-
-				if (buf[0] == '\0')
-					sprintf(buf, "[ %s ] dynamic memory", name);
-
-				goto done;
-			}
-		}
-
-		up_read(&mm->mmap_sem);
-__continue:
-		task_unlock(t);
-	}
-
-	/*
-	 * we were unable to find this address anywhere,
-	 * or some MMs were skipped because they were in use.
-	 */
-	sprintf(buf, "/* kernel dynamic memory */");
-
-done:
-	read_unlock(&tasklist_lock);
-}
-
-#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
-
-/*
- * Similar to get_user, do some address checking, then dereference
- * Return true on success, false on bad address
- */
-bool get_mem16(unsigned short *val, unsigned short *address)
-{
-	unsigned long addr = (unsigned long)address;
-
-	/* Check for odd addresses */
-	if (addr & 0x1)
-		return false;
-
-	switch (bfin_mem_access_type(addr, 2)) {
-	case BFIN_MEM_ACCESS_CORE:
-	case BFIN_MEM_ACCESS_CORE_ONLY:
-		*val = *address;
-		return true;
-	case BFIN_MEM_ACCESS_DMA:
-		dma_memcpy(val, address, 2);
-		return true;
-	case BFIN_MEM_ACCESS_ITEST:
-		isram_memcpy(val, address, 2);
-		return true;
-	default: /* invalid access */
-		return false;
-	}
-}
-
-bool get_instruction(unsigned int *val, unsigned short *address)
-{
-	unsigned long addr = (unsigned long)address;
-	unsigned short opcode0, opcode1;
-
-	/* Check for odd addresses */
-	if (addr & 0x1)
-		return false;
-
-	/* MMR region will never have instructions */
-	if (addr >= SYSMMR_BASE)
-		return false;
-
-	/* Scratchpad will never have instructions */
-	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
-		return false;
-
-	/* Data banks will never have instructions */
-	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
-		return false;
-
-	if (!get_mem16(&opcode0, address))
-		return false;
-
-	/* was this a 32-bit instruction? If so, get the next 16 bits */
-	if ((opcode0 & 0xc000) == 0xc000) {
-		if (!get_mem16(&opcode1, address + 1))
-			return false;
-		*val = (opcode0 << 16) + opcode1;
-	} else
-		*val = opcode0;
-
-	return true;
-}
-
-#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
-/*
- * decode the instruction if we are printing out the trace, as it
- * makes things easier to follow, without running it through objdump
- * Decode the change of flow, and the common load/store instructions
- * which are the main cause for faults, and discontinuities in the trace
- * buffer.
- */
-
-#define ProgCtrl_opcode         0x0000
-#define ProgCtrl_poprnd_bits    0
-#define ProgCtrl_poprnd_mask    0xf
-#define ProgCtrl_prgfunc_bits   4
-#define ProgCtrl_prgfunc_mask   0xf
-#define ProgCtrl_code_bits      8
-#define ProgCtrl_code_mask      0xff
-
-static void decode_ProgCtrl_0(unsigned int opcode)
-{
-	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
-	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
-
-	if (prgfunc == 0 && poprnd == 0)
-		pr_cont("NOP");
-	else if (prgfunc == 1 && poprnd == 0)
-		pr_cont("RTS");
-	else if (prgfunc == 1 && poprnd == 1)
-		pr_cont("RTI");
-	else if (prgfunc == 1 && poprnd == 2)
-		pr_cont("RTX");
-	else if (prgfunc == 1 && poprnd == 3)
-		pr_cont("RTN");
-	else if (prgfunc == 1 && poprnd == 4)
-		pr_cont("RTE");
-	else if (prgfunc == 2 && poprnd == 0)
-		pr_cont("IDLE");
-	else if (prgfunc == 2 && poprnd == 3)
-		pr_cont("CSYNC");
-	else if (prgfunc == 2 && poprnd == 4)
-		pr_cont("SSYNC");
-	else if (prgfunc == 2 && poprnd == 5)
-		pr_cont("EMUEXCPT");
-	else if (prgfunc == 3)
-		pr_cont("CLI R%i", poprnd);
-	else if (prgfunc == 4)
-		pr_cont("STI R%i", poprnd);
-	else if (prgfunc == 5)
-		pr_cont("JUMP (P%i)", poprnd);
-	else if (prgfunc == 6)
-		pr_cont("CALL (P%i)", poprnd);
-	else if (prgfunc == 7)
-		pr_cont("CALL (PC + P%i)", poprnd);
-	else if (prgfunc == 8)
-		pr_cont("JUMP (PC + P%i", poprnd);
-	else if (prgfunc == 9)
-		pr_cont("RAISE %i", poprnd);
-	else if (prgfunc == 10)
-		pr_cont("EXCPT %i", poprnd);
-	else
-		pr_cont("0x%04x", opcode);
-
-}
-
-#define BRCC_opcode             0x1000
-#define BRCC_offset_bits        0
-#define BRCC_offset_mask        0x3ff
-#define BRCC_B_bits             10
-#define BRCC_B_mask             0x1
-#define BRCC_T_bits             11
-#define BRCC_T_mask             0x1
-#define BRCC_code_bits          12
-#define BRCC_code_mask          0xf
-
-static void decode_BRCC_0(unsigned int opcode)
-{
-	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
-	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
-
-	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
-}
-
-#define CALLa_opcode    0xe2000000
-#define CALLa_addr_bits 0
-#define CALLa_addr_mask 0xffffff
-#define CALLa_S_bits    24
-#define CALLa_S_mask    0x1
-#define CALLa_code_bits 25
-#define CALLa_code_mask 0x7f
-
-static void decode_CALLa_0(unsigned int opcode)
-{
-	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
-
-	if (S)
-		pr_cont("CALL pcrel");
-	else
-		pr_cont("JUMP.L");
-}
-
-#define LoopSetup_opcode                0xe0800000
-#define LoopSetup_eoffset_bits          0
-#define LoopSetup_eoffset_mask          0x3ff
-#define LoopSetup_dontcare_bits         10
-#define LoopSetup_dontcare_mask         0x3
-#define LoopSetup_reg_bits              12
-#define LoopSetup_reg_mask              0xf
-#define LoopSetup_soffset_bits          16
-#define LoopSetup_soffset_mask          0xf
-#define LoopSetup_c_bits                20
-#define LoopSetup_c_mask                0x1
-#define LoopSetup_rop_bits              21
-#define LoopSetup_rop_mask              0x3
-#define LoopSetup_code_bits             23
-#define LoopSetup_code_mask             0x1ff
-
-static void decode_LoopSetup_0(unsigned int opcode)
-{
-	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask);
-	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
-	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
-
-	pr_cont("LSETUP <> LC%i", c);
-	if ((rop & 1) == 1)
-		pr_cont("= P%i", reg);
-	if ((rop & 2) == 2)
-		pr_cont(" >> 0x1");
-}
-
-#define DspLDST_opcode          0x9c00
-#define DspLDST_reg_bits        0
-#define DspLDST_reg_mask        0x7
-#define DspLDST_i_bits          3
-#define DspLDST_i_mask          0x3
-#define DspLDST_m_bits          5
-#define DspLDST_m_mask          0x3
-#define DspLDST_aop_bits        7
-#define DspLDST_aop_mask        0x3
-#define DspLDST_W_bits          9
-#define DspLDST_W_mask          0x1
-#define DspLDST_code_bits       10
-#define DspLDST_code_mask       0x3f
-
-static void decode_dspLDST_0(unsigned int opcode)
-{
-	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
-	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
-	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
-	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
-	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
-
-	if (W == 0) {
-		pr_cont("R%i", reg);
-		switch (m) {
-		case 0:
-			pr_cont(" = ");
-			break;
-		case 1:
-			pr_cont(".L = ");
-			break;
-		case 2:
-			pr_cont(".W = ");
-			break;
-		}
-	}
-
-	pr_cont("[ I%i", i);
-
-	switch (aop) {
-	case 0:
-		pr_cont("++ ]");
-		break;
-	case 1:
-		pr_cont("-- ]");
-		break;
-	}
-
-	if (W == 1) {
-		pr_cont(" = R%i", reg);
-		switch (m) {
-		case 1:
-			pr_cont(".L = ");
-			break;
-		case 2:
-			pr_cont(".W = ");
-			break;
-		}
-	}
-}
-
-#define LDST_opcode             0x9000
-#define LDST_reg_bits           0
-#define LDST_reg_mask           0x7
-#define LDST_ptr_bits           3
-#define LDST_ptr_mask           0x7
-#define LDST_Z_bits             6
-#define LDST_Z_mask             0x1
-#define LDST_aop_bits           7
-#define LDST_aop_mask           0x3
-#define LDST_W_bits             9
-#define LDST_W_mask             0x1
-#define LDST_sz_bits            10
-#define LDST_sz_mask            0x3
-#define LDST_code_bits          12
-#define LDST_code_mask          0xf
-
-static void decode_LDST_0(unsigned int opcode)
-{
-	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
-	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask);
-	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
-	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
-	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
-	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
-
-	if (W == 0)
-		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
-
-	switch (sz) {
-	case 1:
-		pr_cont("W");
-		break;
-	case 2:
-		pr_cont("B");
-		break;
-	}
-
-	pr_cont("[P%i", ptr);
-
-	switch (aop) {
-	case 0:
-		pr_cont("++");
-		break;
-	case 1:
-		pr_cont("--");
-		break;
-	}
-	pr_cont("]");
-
-	if (W == 1)
-		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
-
-	if (sz) {
-		if (Z)
-			pr_cont(" (X)");
-		else
-			pr_cont(" (Z)");
-	}
-}
-
-#define LDSTii_opcode           0xa000
-#define LDSTii_reg_bit          0
-#define LDSTii_reg_mask         0x7
-#define LDSTii_ptr_bit          3
-#define LDSTii_ptr_mask         0x7
-#define LDSTii_offset_bit       6
-#define LDSTii_offset_mask      0xf
-#define LDSTii_op_bit           10
-#define LDSTii_op_mask          0x3
-#define LDSTii_W_bit            12
-#define LDSTii_W_mask           0x1
-#define LDSTii_code_bit         13
-#define LDSTii_code_mask        0x7
-
-static void decode_LDSTii_0(unsigned int opcode)
-{
-	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
-	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
-	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
-	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
-	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
-
-	if (W == 0) {
-		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
-			op == 1 || op == 2 ? "" : "W", ptr, offset);
-		if (op == 2)
-			pr_cont("(Z)");
-		if (op == 3)
-			pr_cont("(X)");
-	} else {
-		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
-			offset, op == 3 ? "P" : "R", reg);
-	}
-}
-
-#define LDSTidxI_opcode         0xe4000000
-#define LDSTidxI_offset_bits    0
-#define LDSTidxI_offset_mask    0xffff
-#define LDSTidxI_reg_bits       16
-#define LDSTidxI_reg_mask       0x7
-#define LDSTidxI_ptr_bits       19
-#define LDSTidxI_ptr_mask       0x7
-#define LDSTidxI_sz_bits        22
-#define LDSTidxI_sz_mask        0x3
-#define LDSTidxI_Z_bits         24
-#define LDSTidxI_Z_mask         0x1
-#define LDSTidxI_W_bits         25
-#define LDSTidxI_W_mask         0x1
-#define LDSTidxI_code_bits      26
-#define LDSTidxI_code_mask      0x3f
-
-static void decode_LDSTidxI_0(unsigned int opcode)
-{
-	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask);
-	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask);
-	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask);
-	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask);
-	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask);
-	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
-
-	if (W == 0)
-		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
-
-	if (sz == 1)
-		pr_cont("W");
-	if (sz == 2)
-		pr_cont("B");
-
-	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
-		(offset & 0x1f) << 2);
-
-	if (W == 0 && sz != 0) {
-		if (Z)
-			pr_cont("(X)");
-		else
-			pr_cont("(Z)");
-	}
-
-	if (W == 1)
-		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
-
-}
-
-static void decode_opcode(unsigned int opcode)
-{
-#ifdef CONFIG_BUG
-	if (opcode == BFIN_BUG_OPCODE)
-		pr_cont("BUG");
-	else
-#endif
-	if ((opcode & 0xffffff00) == ProgCtrl_opcode)
-		decode_ProgCtrl_0(opcode);
-	else if ((opcode & 0xfffff000) == BRCC_opcode)
-		decode_BRCC_0(opcode);
-	else if ((opcode & 0xfffff000) == 0x2000)
-		pr_cont("JUMP.S");
-	else if ((opcode & 0xfe000000) == CALLa_opcode)
-		decode_CALLa_0(opcode);
-	else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
-		decode_LoopSetup_0(opcode);
-	else if ((opcode & 0xfffffc00) == DspLDST_opcode)
-		decode_dspLDST_0(opcode);
-	else if ((opcode & 0xfffff000) == LDST_opcode)
-		decode_LDST_0(opcode);
-	else if ((opcode & 0xffffe000) == LDSTii_opcode)
-		decode_LDSTii_0(opcode);
-	else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
-		decode_LDSTidxI_0(opcode);
-	else if (opcode & 0xffff0000)
-		pr_cont("0x%08x", opcode);
-	else
-		pr_cont("0x%04x", opcode);
-}
-
-#define BIT_MULTI_INS 0x08000000
-static void decode_instruction(unsigned short *address)
-{
-	unsigned int opcode;
-
-	if (!get_instruction(&opcode, address))
-		return;
-
-	decode_opcode(opcode);
-
-	/* If things are a 32-bit instruction, it has the possibility of being
-	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
-	 * This test collidates with the unlink instruction, so disallow that
-	 */
-	if ((opcode & 0xc0000000) == 0xc0000000 &&
-	    (opcode & BIT_MULTI_INS) &&
-	    (opcode & 0xe8000000) != 0xe8000000) {
-		pr_cont(" || ");
-		if (!get_instruction(&opcode, address + 2))
-			return;
-		decode_opcode(opcode);
-		pr_cont(" || ");
-		if (!get_instruction(&opcode, address + 3))
-			return;
-		decode_opcode(opcode);
-	}
-}
-#endif
-
-void dump_bfin_trace_buffer(void)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags, i = 0, fault = 0;
-	char buf[150];
-	unsigned short *addr;
-	unsigned int cpu = raw_smp_processor_id();
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	int j, index;
-#endif
-
-	trace_buffer_save(tflags);
-
-	pr_notice("Hardware Trace:\n");
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
-#endif
-
-	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
-		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
-			addr = (unsigned short *)bfin_read_TBUF();
-			decode_address(buf, (unsigned long)addr);
-			pr_notice("%4i Target : %s\n", i, buf);
-			/* Normally, the faulting instruction doesn't go into
-			 * the trace buffer, (since it doesn't commit), so
-			 * we print out the fault address here
-			 */
-			if (!fault && addr == ((unsigned short *)evt_ivhw)) {
-				addr = (unsigned short *)bfin_read_TBUF();
-				decode_address(buf, (unsigned long)addr);
-				pr_notice("      FAULT : %s ", buf);
-				decode_instruction(addr);
-				pr_cont("\n");
-				fault = 1;
-				continue;
-			}
-			if (!fault && addr == (unsigned short *)trap &&
-				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
-				decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-				pr_notice("      FAULT : %s ", buf);
-				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
-				pr_cont("\n");
-				fault = 1;
-			}
-			addr = (unsigned short *)bfin_read_TBUF();
-			decode_address(buf, (unsigned long)addr);
-			pr_notice("     Source : %s ", buf);
-			decode_instruction(addr);
-			pr_cont("\n");
-		}
-	}
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	if (trace_buff_offset)
-		index = trace_buff_offset / 4;
-	else
-		index = EXPAND_LEN;
-
-	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
-	while (j) {
-		decode_address(buf, software_trace_buff[index]);
-		pr_notice("%4i Target : %s\n", i, buf);
-		index -= 1;
-		if (index < 0)
-			index = EXPAND_LEN;
-		decode_address(buf, software_trace_buff[index]);
-		pr_notice("     Source : %s ", buf);
-		decode_instruction((unsigned short *)software_trace_buff[index]);
-		pr_cont("\n");
-		index -= 1;
-		if (index < 0)
-			index = EXPAND_LEN;
-		j--;
-		i++;
-	}
-#endif
-
-	trace_buffer_restore(tflags);
-#endif
-}
-EXPORT_SYMBOL(dump_bfin_trace_buffer);
-
-void dump_bfin_process(struct pt_regs *fp)
-{
-	/* We should be able to look at fp->ipend, but we don't push it on the
-	 * stack all the time, so do this until we fix that */
-	unsigned int context = bfin_read_IPEND();
-
-	if (oops_in_progress)
-		pr_emerg("Kernel OOPS in progress\n");
-
-	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-		pr_notice("HW Error context\n");
-	else if (context & 0x0020)
-		pr_notice("Deferred Exception context\n");
-	else if (context & 0x3FC0)
-		pr_notice("Interrupt context\n");
-	else if (context & 0x4000)
-		pr_notice("Deferred Interrupt context\n");
-	else if (context & 0x8000)
-		pr_notice("Kernel process context\n");
-
-	/* Because we are crashing, and pointers could be bad, we check things
-	 * pretty closely before we use them
-	 */
-	if ((unsigned long)current >= FIXED_CODE_START &&
-	    !((unsigned long)current & 0x3) && current->pid) {
-		pr_notice("CURRENT PROCESS:\n");
-		if (current->comm >= (char *)FIXED_CODE_START)
-			pr_notice("COMM=%s PID=%d",
-				current->comm, current->pid);
-		else
-			pr_notice("COMM= invalid");
-
-		pr_cont("  CPU=%d\n", current_thread_info()->cpu);
-		if (!((unsigned long)current->mm & 0x3) &&
-			(unsigned long)current->mm >= FIXED_CODE_START) {
-			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
-				(void *)current->mm->start_code,
-				(void *)current->mm->end_code,
-				(void *)current->mm->start_data,
-				(void *)current->mm->end_data);
-			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
-				(void *)current->mm->end_data,
-				(void *)current->mm->brk,
-				(void *)current->mm->start_stack);
-		} else
-			pr_notice("invalid mm\n");
-	} else
-		pr_notice("No Valid process in current context\n");
-}
-
-void dump_bfin_mem(struct pt_regs *fp)
-{
-	unsigned short *addr, *erraddr, val = 0, err = 0;
-	char sti = 0, buf[6];
-
-	erraddr = (void *)fp->pc;
-
-	pr_notice("return address: [0x%p]; contents of:", erraddr);
-
-	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
-	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
-	     addr++) {
-		if (!((unsigned long)addr & 0xF))
-			pr_notice("0x%p: ", addr);
-
-		if (!get_mem16(&val, addr)) {
-				val = 0;
-				sprintf(buf, "????");
-		} else
-			sprintf(buf, "%04x", val);
-
-		if (addr == erraddr) {
-			pr_cont("[%s]", buf);
-			err = val;
-		} else
-			pr_cont(" %s ", buf);
-
-		/* Do any previous instructions turn on interrupts? */
-		if (addr <= erraddr &&				/* in the past */
-		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
-		      val == 0x017b))				/* [SP++] = RETI */
-			sti = 1;
-	}
-
-	pr_cont("\n");
-
-	/* Hardware error interrupts can be deferred */
-	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
-	    oops_in_progress)){
-		pr_notice("Looks like this was a deferred error - sorry\n");
-#ifndef CONFIG_DEBUG_HWERR
-		pr_notice("The remaining message may be meaningless\n");
-		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
-#else
-		/* If we are handling only one peripheral interrupt
-		 * and current mm and pid are valid, and the last error
-		 * was in that user space process's text area
-		 * print it out - because that is where the problem exists
-		 */
-		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
-		     (current->pid && current->mm)) {
-			/* And the last RETI points to the current userspace context */
-			if ((fp + 1)->pc >= current->mm->start_code &&
-			    (fp + 1)->pc <= current->mm->end_code) {
-				pr_notice("It might be better to look around here :\n");
-				pr_notice("-------------------------------------------\n");
-				show_regs(fp + 1);
-				pr_notice("-------------------------------------------\n");
-			}
-		}
-#endif
-	}
-}
-
-void show_regs(struct pt_regs *fp)
-{
-	char buf[150];
-	struct irqaction *action;
-	unsigned int i;
-	unsigned long flags = 0;
-	unsigned int cpu = raw_smp_processor_id();
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-
-	pr_notice("\n");
-	show_regs_print_info(KERN_NOTICE);
-
-	if (CPUID != bfin_cpuid())
-		pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
-			"but running on:0x%04x (Rev %d)\n",
-			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
-
-	pr_notice("ADSP-%s-0.%d",
-		CPU, bfin_compiled_revid());
-
-	if (bfin_compiled_revid() !=  bfin_revid())
-		pr_cont("(Detected 0.%d)", bfin_revid());
-
-	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
-		get_cclk()/1000000, get_sclk()/1000000,
-#ifdef CONFIG_MPU
-		"mpu on"
-#else
-		"mpu off"
-#endif
-		);
-
-	pr_notice("%s", linux_banner);
-
-	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
-	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
-	if (fp->ipend & EVT_IRPTEN)
-		pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
-			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
-		pr_notice("  Peripheral interrupts masked off\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
-		pr_notice("  Kernel interrupts masked off\n");
-	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
-		pr_notice("  HWERRCAUSE: 0x%lx\n",
-			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
-#ifdef EBIU_ERRMST
-		/* If the error was from the EBIU, print it out */
-		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
-			pr_notice("  EBIU Error Reason  : 0x%04x\n",
-				bfin_read_EBIU_ERRMST());
-			pr_notice("  EBIU Error Address : 0x%08x\n",
-				bfin_read_EBIU_ERRADD());
-		}
-#endif
-	}
-	pr_notice("  EXCAUSE   : 0x%lx\n",
-		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 2; i <= 15 ; i++) {
-		if (fp->ipend & (1 << i)) {
-			if (i != 4) {
-				decode_address(buf, bfin_read32(EVT0 + 4*i));
-				pr_notice("  physical IVG%i asserted : %s\n", i, buf);
-			} else
-				pr_notice("  interrupts disabled\n");
-		}
-	}
-
-	/* if no interrupts are going off, don't print this out */
-	if (fp->ipend & ~0x3F) {
-		for (i = 0; i < (NR_IRQS - 1); i++) {
-			struct irq_desc *desc = irq_to_desc(i);
-			if (!in_atomic)
-				raw_spin_lock_irqsave(&desc->lock, flags);
-
-			action = desc->action;
-			if (!action)
-				goto unlock;
-
-			decode_address(buf, (unsigned int)action->handler);
-			pr_notice("  logical irq %3d mapped  : %s", i, buf);
-			for (action = action->next; action; action = action->next) {
-				decode_address(buf, (unsigned int)action->handler);
-				pr_cont(", %s", buf);
-			}
-			pr_cont("\n");
-unlock:
-			if (!in_atomic)
-				raw_spin_unlock_irqrestore(&desc->lock, flags);
-		}
-	}
-
-	decode_address(buf, fp->rete);
-	pr_notice(" RETE: %s\n", buf);
-	decode_address(buf, fp->retn);
-	pr_notice(" RETN: %s\n", buf);
-	decode_address(buf, fp->retx);
-	pr_notice(" RETX: %s\n", buf);
-	decode_address(buf, fp->rets);
-	pr_notice(" RETS: %s\n", buf);
-	decode_address(buf, fp->pc);
-	pr_notice(" PC  : %s\n", buf);
-
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
-	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
-		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
-	}
-
-	pr_notice("PROCESSOR STATE:\n");
-	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
-		fp->r0, fp->r1, fp->r2, fp->r3);
-	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
-		fp->r4, fp->r5, fp->r6, fp->r7);
-	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
-		fp->p0, fp->p1, fp->p2, fp->p3);
-	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
-		fp->p4, fp->p5, fp->fp, (long)fp);
-	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
-		fp->lb0, fp->lt0, fp->lc0);
-	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
-		fp->lb1, fp->lt1, fp->lc1);
-	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
-		fp->b0, fp->l0, fp->m0, fp->i0);
-	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
-		fp->b1, fp->l1, fp->m1, fp->i1);
-	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
-		fp->b2, fp->l2, fp->m2, fp->i2);
-	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
-		fp->b3, fp->l3, fp->m3, fp->i3);
-	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
-
-	pr_notice("USP : %08lx  ASTAT: %08lx\n",
-		rdusp(), fp->astat);
-
-	pr_notice("\n");
-}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
deleted file mode 100644
index a323a40a46e9..000000000000
--- a/arch/blackfin/kernel/traps.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/*
- * Main exception handling logic.
- *
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/bug.h>
-#include <linux/uaccess.h>
-#include <linux/module.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <asm/traps.h>
-#include <asm/cplb.h>
-#include <asm/blackfin.h>
-#include <asm/irq_handler.h>
-#include <linux/irq.h>
-#include <asm/trace.h>
-#include <asm/fixed_code.h>
-#include <asm/pseudo_instructions.h>
-#include <asm/pda.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_KGDB
-# include <linux/kgdb.h>
-
-# define CHK_DEBUGGER_TRAP() \
-	do { \
-		kgdb_handle_exception(trapnr, sig, info.si_code, fp); \
-	} while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() \
-	do { \
-		if (kgdb_connected) \
-			CHK_DEBUGGER_TRAP(); \
-	} while (0)
-#else
-# define CHK_DEBUGGER_TRAP() do { } while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
-#endif
-
-
-#ifdef CONFIG_DEBUG_VERBOSE
-#define verbose_printk(fmt, arg...) \
-	printk(fmt, ##arg)
-#else
-#define verbose_printk(fmt, arg...) \
-	({ if (0) printk(fmt, ##arg); 0; })
-#endif
-
-#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
-u32 last_seqstat;
-#ifdef CONFIG_DEBUG_MMRS_MODULE
-EXPORT_SYMBOL(last_seqstat);
-#endif
-#endif
-
-/* Initiate the event table handler */
-void __init trap_init(void)
-{
-	CSYNC();
-	bfin_write_EVT3(trap);
-	CSYNC();
-}
-
-static int kernel_mode_regs(struct pt_regs *regs)
-{
-	return regs->ipend & 0xffc0;
-}
-
-asmlinkage notrace void trap_c(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int j;
-#endif
-#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
-	int opcode;
-#endif
-	unsigned int cpu = raw_smp_processor_id();
-	const char *strerror = NULL;
-	int sig = 0;
-	siginfo_t info;
-	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
-
-	trace_buffer_save(j);
-#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
-	last_seqstat = (u32)fp->seqstat;
-#endif
-
-	/* Important - be very careful dereferncing pointers - will lead to
-	 * double faults if the stack has become corrupt
-	 */
-
-	/* trap_c() will be called for exceptions. During exceptions
-	 * processing, the pc value should be set with retx value.
-	 * With this change we can cleanup some code in signal.c- TODO
-	 */
-	fp->orig_pc = fp->retx;
-	/* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n",
-		trapnr, fp->ipend, fp->pc, fp->retx); */
-
-	/* send the appropriate signal to the user program */
-	switch (trapnr) {
-
-	/* This table works in conjunction with the one in ./mach-common/entry.S
-	 * Some exceptions are handled there (in assembly, in exception space)
-	 * Some are handled here, (in C, in interrupt space)
-	 * Some, like CPLB, are handled in both, where the normal path is
-	 * handled in assembly/exception space, and the error path is handled
-	 * here
-	 */
-
-	/* 0x00 - Linux Syscall, getting here is an error */
-	/* 0x01 - userspace gdb breakpoint, handled here */
-	case VEC_EXCPT01:
-		info.si_code = TRAP_ILLTRAP;
-		sig = SIGTRAP;
-		CHK_DEBUGGER_TRAP_MAYBE();
-		/* Check if this is a breakpoint in kernel space */
-		if (kernel_mode_regs(fp))
-			goto traps_done;
-		else
-			break;
-	/* 0x03 - User Defined, userspace stack overflow */
-	case VEC_EXCPT03:
-		info.si_code = SEGV_STACKFLOW;
-		sig = SIGSEGV;
-		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x02 - KGDB initial connection and break signal trap */
-	case VEC_EXCPT02:
-#ifdef CONFIG_KGDB
-		info.si_code = TRAP_ILLTRAP;
-		sig = SIGTRAP;
-		CHK_DEBUGGER_TRAP();
-		goto traps_done;
-#endif
-	/* 0x04 - User Defined */
-	/* 0x05 - User Defined */
-	/* 0x06 - User Defined */
-	/* 0x07 - User Defined */
-	/* 0x08 - User Defined */
-	/* 0x09 - User Defined */
-	/* 0x0A - User Defined */
-	/* 0x0B - User Defined */
-	/* 0x0C - User Defined */
-	/* 0x0D - User Defined */
-	/* 0x0E - User Defined */
-	/* 0x0F - User Defined */
-	/* If we got here, it is most likely that someone was trying to use a
-	 * custom exception handler, and it is not actually installed properly
-	 */
-	case VEC_EXCPT04 ... VEC_EXCPT15:
-		info.si_code = ILL_ILLPARAOP;
-		sig = SIGILL;
-		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x10 HW Single step, handled here */
-	case VEC_STEP:
-		info.si_code = TRAP_STEP;
-		sig = SIGTRAP;
-		CHK_DEBUGGER_TRAP_MAYBE();
-		/* Check if this is a single step in kernel space */
-		if (kernel_mode_regs(fp))
-			goto traps_done;
-		else
-			break;
-	/* 0x11 - Trace Buffer Full, handled here */
-	case VEC_OVFLOW:
-		info.si_code = TRAP_TRACEFLOW;
-		sig = SIGTRAP;
-		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x12 - Reserved, Caught by default */
-	/* 0x13 - Reserved, Caught by default */
-	/* 0x14 - Reserved, Caught by default */
-	/* 0x15 - Reserved, Caught by default */
-	/* 0x16 - Reserved, Caught by default */
-	/* 0x17 - Reserved, Caught by default */
-	/* 0x18 - Reserved, Caught by default */
-	/* 0x19 - Reserved, Caught by default */
-	/* 0x1A - Reserved, Caught by default */
-	/* 0x1B - Reserved, Caught by default */
-	/* 0x1C - Reserved, Caught by default */
-	/* 0x1D - Reserved, Caught by default */
-	/* 0x1E - Reserved, Caught by default */
-	/* 0x1F - Reserved, Caught by default */
-	/* 0x20 - Reserved, Caught by default */
-	/* 0x21 - Undefined Instruction, handled here */
-	case VEC_UNDEF_I:
-#ifdef CONFIG_BUG
-		if (kernel_mode_regs(fp)) {
-			switch (report_bug(fp->pc, fp)) {
-			case BUG_TRAP_TYPE_NONE:
-				break;
-			case BUG_TRAP_TYPE_WARN:
-				dump_bfin_trace_buffer();
-				fp->pc += 2;
-				goto traps_done;
-			case BUG_TRAP_TYPE_BUG:
-				/* call to panic() will dump trace, and it is
-				 * off at this point, so it won't be clobbered
-				 */
-				panic("BUG()");
-			}
-		}
-#endif
-#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
-		/*
-		 * Support for the fake instructions, if the instruction fails,
-		 * then just execute a illegal opcode failure (like normal).
-		 * Don't support these instructions inside the kernel
-		 */
-		if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
-			if (execute_pseudodbg_assert(fp, opcode))
-				goto traps_done;
-			if (execute_pseudodbg(fp, opcode))
-				goto traps_done;
-		}
-#endif
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x22 - Illegal Instruction Combination, handled here */
-	case VEC_ILGAL_I:
-		info.si_code = ILL_ILLPARAOP;
-		sig = SIGILL;
-		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x23 - Data CPLB protection violation, handled here */
-	case VEC_CPLB_VL:
-		info.si_code = ILL_CPLB_VI;
-		sig = SIGSEGV;
-		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x24 - Data access misaligned, handled here */
-	case VEC_MISALI_D:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x25 - Unrecoverable Event, handled here */
-	case VEC_UNCOV:
-		info.si_code = ILL_ILLEXCPT;
-		sig = SIGILL;
-		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
-		error case is handled here */
-	case VEC_CPLB_M:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
-		break;
-	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
-	case VEC_CPLB_MHIT:
-		info.si_code = ILL_CPLB_MULHIT;
-		sig = SIGSEGV;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
-			strerror = KERN_NOTICE "NULL pointer access\n";
-		else
-#endif
-			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x28 - Emulation Watchpoint, handled here */
-	case VEC_WATCH:
-		info.si_code = TRAP_WATCHPT;
-		sig = SIGTRAP;
-		pr_debug(EXC_0x28(KERN_DEBUG));
-		CHK_DEBUGGER_TRAP_MAYBE();
-		/* Check if this is a watchpoint in kernel space */
-		if (kernel_mode_regs(fp))
-			goto traps_done;
-		else
-			break;
-#ifdef CONFIG_BF535
-	/* 0x29 - Instruction fetch access error (535 only) */
-	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
-		info.si_code = BUS_OPFETCH;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-#else
-	/* 0x29 - Reserved, Caught by default */
-#endif
-	/* 0x2A - Instruction fetch misaligned, handled here */
-	case VEC_MISALI_I:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x2B - Instruction CPLB protection violation, handled here */
-	case VEC_CPLB_I_VL:
-		info.si_code = ILL_CPLB_VI;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
-	case VEC_CPLB_I_M:
-		info.si_code = ILL_CPLB_MISS;
-		sig = SIGBUS;
-		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
-		break;
-	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
-	case VEC_CPLB_I_MHIT:
-		info.si_code = ILL_CPLB_MULHIT;
-		sig = SIGSEGV;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
-			strerror = KERN_NOTICE "Jump to NULL address\n";
-		else
-#endif
-			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x2E - Illegal use of Supervisor Resource, handled here */
-	case VEC_ILL_RES:
-		info.si_code = ILL_PRVOPC;
-		sig = SIGILL;
-		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/* 0x2F - Reserved, Caught by default */
-	/* 0x30 - Reserved, Caught by default */
-	/* 0x31 - Reserved, Caught by default */
-	/* 0x32 - Reserved, Caught by default */
-	/* 0x33 - Reserved, Caught by default */
-	/* 0x34 - Reserved, Caught by default */
-	/* 0x35 - Reserved, Caught by default */
-	/* 0x36 - Reserved, Caught by default */
-	/* 0x37 - Reserved, Caught by default */
-	/* 0x38 - Reserved, Caught by default */
-	/* 0x39 - Reserved, Caught by default */
-	/* 0x3A - Reserved, Caught by default */
-	/* 0x3B - Reserved, Caught by default */
-	/* 0x3C - Reserved, Caught by default */
-	/* 0x3D - Reserved, Caught by default */
-	/* 0x3E - Reserved, Caught by default */
-	/* 0x3F - Reserved, Caught by default */
-	case VEC_HWERR:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		switch (fp->seqstat & SEQSTAT_HWERRCAUSE) {
-		/* System MMR Error */
-		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
-			info.si_code = BUS_ADRALN;
-			sig = SIGBUS;
-			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
-			break;
-		/* External Memory Addressing Error */
-		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
-			if (ANOMALY_05000310) {
-				static unsigned long anomaly_rets;
-
-				if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
-				    (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) {
-					/*
-					 * A false hardware error will happen while fetching at
-					 * the L1 instruction SRAM boundary.  Ignore it.
-					 */
-					anomaly_rets = fp->rets;
-					goto traps_done;
-				} else if (fp->rets == anomaly_rets) {
-					/*
-					 * While boundary code returns to a function, at the ret
-					 * point, a new false hardware error might occur too based
-					 * on tests.  Ignore it too.
-					 */
-					goto traps_done;
-				} else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
-				           (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) {
-					/*
-					 * If boundary code calls a function, at the entry point,
-					 * a new false hardware error maybe happen based on tests.
-					 * Ignore it too.
-					 */
-					goto traps_done;
-				} else
-					anomaly_rets = 0;
-			}
-
-			info.si_code = BUS_ADRERR;
-			sig = SIGBUS;
-			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
-			break;
-		/* Performance Monitor Overflow */
-		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
-			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
-			break;
-		/* RAISE 5 instruction */
-		case (SEQSTAT_HWERRCAUSE_RAISE_5):
-			printk(KERN_NOTICE HWC_x18(KERN_NOTICE));
-			break;
-		default:        /* Reserved */
-			printk(KERN_NOTICE HWC_default(KERN_NOTICE));
-			break;
-		}
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	/*
-	 * We should be handling all known exception types above,
-	 * if we get here we hit a reserved one, so panic
-	 */
-	default:
-		info.si_code = ILL_ILLPARAOP;
-		sig = SIGILL;
-		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
-			(fp->seqstat & SEQSTAT_EXCAUSE));
-		CHK_DEBUGGER_TRAP_MAYBE();
-		break;
-	}
-
-	BUG_ON(sig == 0);
-
-	/* If the fault was caused by a kernel thread, or interrupt handler
-	 * we will kernel panic, so the system reboots.
-	 */
-	if (kernel_mode_regs(fp) || (current && !current->mm)) {
-		console_verbose();
-		oops_in_progress = 1;
-	}
-
-	if (sig != SIGTRAP) {
-		if (strerror)
-			verbose_printk(strerror);
-
-		dump_bfin_process(fp);
-		dump_bfin_mem(fp);
-		show_regs(fp);
-
-		/* Print out the trace buffer if it makes sense */
-#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
-		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
-			verbose_printk(KERN_NOTICE "No trace since you do not have "
-			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
-		else
-#endif
-			dump_bfin_trace_buffer();
-
-		if (oops_in_progress) {
-			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "Kernel Stack\n");
-			show_stack(current, NULL);
-			print_modules();
-#ifndef CONFIG_ACCESS_CHECK
-			verbose_printk(KERN_EMERG "Please turn on "
-			       "CONFIG_ACCESS_CHECK\n");
-#endif
-			panic("Kernel exception");
-		} else {
-#ifdef CONFIG_DEBUG_VERBOSE
-			unsigned long *stack;
-			/* Dump the user space stack */
-			stack = (unsigned long *)rdusp();
-			verbose_printk(KERN_NOTICE "Userspace Stack\n");
-			show_stack(NULL, stack);
-#endif
-		}
-	}
-
-#ifdef CONFIG_IPIPE
-	if (!ipipe_trap_notify(fp->seqstat & 0x3f, fp))
-#endif
-	{
-		info.si_signo = sig;
-		info.si_errno = 0;
-		switch (trapnr) {
-		case VEC_CPLB_VL:
-		case VEC_MISALI_D:
-		case VEC_CPLB_M:
-		case VEC_CPLB_MHIT:
-			info.si_addr = (void __user *)cpu_pda[cpu].dcplb_fault_addr;
-			break;
-		default:
-			info.si_addr = (void __user *)fp->pc;
-			break;
-		}
-		force_sig_info(sig, &info, current);
-	}
-
-	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
-	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
-	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
-		fp->pc = SAFE_USER_INSTRUCTION;
-
- traps_done:
-	trace_buffer_restore(j);
-}
-
-asmlinkage void double_fault_c(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int j;
-	trace_buffer_save(j);
-#endif
-
-	console_verbose();
-	oops_in_progress = 1;
-#ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "Double Fault\n");
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = raw_smp_processor_id();
-		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx_doublefault);
-		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
-		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
-		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
-
-		decode_address(buf, fp->retx);
-		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
-	} else
-#endif
-	{
-		dump_bfin_process(fp);
-		dump_bfin_mem(fp);
-		show_regs(fp);
-		dump_bfin_trace_buffer();
-	}
-#endif
-	panic("Double Fault - unrecoverable event");
-
-}
-
-
-void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
-{
-	switch (cplb_panic) {
-	case CPLB_NO_UNLOCKED:
-		printk(KERN_EMERG "All CPLBs are locked\n");
-		break;
-	case CPLB_PROT_VIOL:
-		return;
-	case CPLB_NO_ADDR_MATCH:
-		return;
-	case CPLB_UNKNOWN_ERR:
-		printk(KERN_EMERG "Unknown CPLB Exception\n");
-		break;
-	}
-
-	oops_in_progress = 1;
-
-	dump_bfin_process(fp);
-	dump_bfin_mem(fp);
-	show_regs(fp);
-	dump_stack();
-	panic("Unrecoverable event");
-}
-
-#ifdef CONFIG_BUG
-int is_valid_bugaddr(unsigned long addr)
-{
-	unsigned int opcode;
-
-	if (!get_instruction(&opcode, (unsigned short *)addr))
-		return 0;
-
-	return opcode == BFIN_BUG_OPCODE;
-}
-#endif
-
-/* stub this out */
-#ifndef CONFIG_DEBUG_VERBOSE
-void show_regs(struct pt_regs *fp)
-{
-
-}
-#endif
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
deleted file mode 100644
index 334ef8139b35..000000000000
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/mem_map.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
-
-OUTPUT_FORMAT("elf32-bfin")
-ENTRY(__start)
-_jiffies = _jiffies_64;
-
-SECTIONS
-{
-#ifdef CONFIG_RAMKERNEL
-	. = CONFIG_BOOT_LOAD;
-#else
-	. = CONFIG_ROM_BASE;
-#endif
-
-	/* Neither the text, ro_data or bss section need to be aligned
-	 * So pack them back to back
-	 */
-	.text :
-	{
-		__text = .;
-		_text = .;
-		__stext = .;
-		TEXT_TEXT
-#ifndef CONFIG_SCHEDULE_L1
-		SCHED_TEXT
-#endif
-		CPUIDLE_TEXT
-		LOCK_TEXT
-		IRQENTRY_TEXT
-		SOFTIRQENTRY_TEXT
-		KPROBES_TEXT
-#ifdef CONFIG_ROMKERNEL
-		__sinittext = .;
-		INIT_TEXT
-		__einittext = .;
-		EXIT_TEXT
-#endif
-		*(.text.*)
-		*(.fixup)
-
-#if !L1_CODE_LENGTH
-		*(.l1.text)
-#endif
-		__etext = .;
-	}
-
-	EXCEPTION_TABLE(4)
-	NOTES
-
-	/* Just in case the first read only is a 32-bit access */
-	RO_DATA(4)
-	__rodata_end = .;
-
-#ifdef CONFIG_ROMKERNEL
-	. = CONFIG_BOOT_LOAD;
-	.bss : AT(__rodata_end)
-#else
-	.bss :
-#endif
-	{
-		. = ALIGN(4);
-		___bss_start = .;
-		*(.bss .bss.*)
-		*(COMMON)
-#if !L1_DATA_A_LENGTH
-		*(.l1.bss)
-#endif
-#if !L1_DATA_B_LENGTH
-		*(.l1.bss.B)
-#endif
-		. = ALIGN(4);
-		___bss_stop = .;
-	}
-
-#if defined(CONFIG_ROMKERNEL)
-	.data : AT(LOADADDR(.bss) + SIZEOF(.bss))
-#else
-	.data :
-#endif
-	{
-		__sdata = .;
-		/* This gets done first, so the glob doesn't suck it in */
-		CACHELINE_ALIGNED_DATA(32)
-
-#if !L1_DATA_A_LENGTH
-		. = ALIGN(32);
-		*(.data_l1.cacheline_aligned)
-		*(.l1.data)
-#endif
-#if !L1_DATA_B_LENGTH
-		*(.l1.data.B)
-#endif
-#if !L2_LENGTH
-		. = ALIGN(32);
-		*(.data_l2.cacheline_aligned)
-		*(.l2.data)
-#endif
-
-		DATA_DATA
-		CONSTRUCTORS
-
-		INIT_TASK_DATA(THREAD_SIZE)
-
-		__edata = .;
-	}
-	__data_lma = LOADADDR(.data);
-	__data_len = SIZEOF(.data);
-
-	BUG_TABLE
-
-	/* The init section should be last, so when we free it, it goes into
-	 * the general memory pool, and (hopefully) will decrease fragmentation
-	 * a tiny bit. The init section has a _requirement_ that it be
-	 * PAGE_SIZE aligned
-	 */
-	. = ALIGN(PAGE_SIZE);
-	___init_begin = .;
-
-#ifdef CONFIG_RAMKERNEL
-	INIT_TEXT_SECTION(PAGE_SIZE)
-
-	/* We have to discard exit text and such at runtime, not link time, to
-	 * handle embedded cross-section references (alt instructions, bug
-	 * table, eh_frame, etc...).  We need all of our .text up front and
-	 * .data after it for PCREL call issues.
-	 */
-	.exit.text :
-	{
-		EXIT_TEXT
-	}
-
-	. = ALIGN(16);
-	INIT_DATA_SECTION(16)
-	PERCPU_SECTION(32)
-
-	.exit.data :
-	{
-		EXIT_DATA
-	}
-
-	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
-#else
-	.init.data : AT(__data_lma + __data_len + 32)
-	{
-		__sinitdata = .;
-		INIT_DATA
-		INIT_SETUP(16)
-		INIT_CALLS
-		CON_INITCALL
-		SECURITY_INITCALL
-		INIT_RAM_FS
-
-		. = ALIGN(PAGE_SIZE);
-		___per_cpu_load = .;
-		PERCPU_INPUT(32)
-
-		EXIT_DATA
-		__einitdata = .;
-	}
-	__init_data_lma = LOADADDR(.init.data);
-	__init_data_len = SIZEOF(.init.data);
-	__init_data_end = .;
-
-	.text_l1 L1_CODE_START : AT(__init_data_lma + __init_data_len)
-#endif
-	{
-		. = ALIGN(4);
-		__stext_l1 = .;
-		*(.l1.text.head)
-		*(.l1.text)
-#ifdef CONFIG_SCHEDULE_L1
-		SCHED_TEXT
-#endif
-		. = ALIGN(4);
-		__etext_l1 = .;
-	}
-	__text_l1_lma = LOADADDR(.text_l1);
-	__text_l1_len = SIZEOF(.text_l1);
-	ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!")
-
-	.data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len)
-	{
-		. = ALIGN(4);
-		__sdata_l1 = .;
-		*(.l1.data)
-		__edata_l1 = .;
-
-		. = ALIGN(32);
-		*(.data_l1.cacheline_aligned)
-
-		. = ALIGN(4);
-		__sbss_l1 = .;
-		*(.l1.bss)
-		. = ALIGN(4);
-		__ebss_l1 = .;
-	}
-	__data_l1_lma = LOADADDR(.data_l1);
-	__data_l1_len = SIZEOF(.data_l1);
-	ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!")
-
-	.data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len)
-	{
-		. = ALIGN(4);
-		__sdata_b_l1 = .;
-		*(.l1.data.B)
-		__edata_b_l1 = .;
-
-		. = ALIGN(4);
-		__sbss_b_l1 = .;
-		*(.l1.bss.B)
-		. = ALIGN(4);
-		__ebss_b_l1 = .;
-	}
-	__data_b_l1_lma = LOADADDR(.data_b_l1);
-	__data_b_l1_len = SIZEOF(.data_b_l1);
-	ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!")
-
-	.text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len)
-	{
-		. = ALIGN(4);
-		__stext_l2 = .;
-		*(.l2.text)
-		. = ALIGN(4);
-		__etext_l2 = .;
-
-		. = ALIGN(4);
-		__sdata_l2 = .;
-		*(.l2.data)
-		__edata_l2 = .;
-
-		. = ALIGN(32);
-		*(.data_l2.cacheline_aligned)
-
-		. = ALIGN(4);
-		__sbss_l2 = .;
-		*(.l2.bss)
-		. = ALIGN(4);
-		__ebss_l2 = .;
-	}
-	__l2_lma = LOADADDR(.text_data_l2);
-	__l2_len = SIZEOF(.text_data_l2);
-	ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!")
-
-	/* Force trailing alignment of our init section so that when we
-	 * free our init memory, we don't leave behind a partial page.
-	 */
-#ifdef CONFIG_RAMKERNEL
-	. = __l2_lma + __l2_len;
-#else
-	. = __init_data_end;
-#endif
-	. = ALIGN(PAGE_SIZE);
-	___init_end = .;
-
-	__end =.;
-
-	STABS_DEBUG
-
-	DWARF_DEBUG
-
-	DISCARDS
-}