arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

27 files changed, 0 insertions, 10840 deletions

diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
deleted file mode 100644
index 6df20f9c7bd4..000000000000
--- a/arch/blackfin/mach-bf527/Kconfig
+++ /dev/null
@@ -1,325 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config BF52x
-	def_bool y
-	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
-
-if (BF52x)
-
-source "arch/blackfin/mach-bf527/boards/Kconfig"
-
-menu "BF527 Specific Configuration"
-
-comment "Alternative Multiplexing Scheme"
-
-choice
-	prompt "SPORT0"
-	default BF527_SPORT0_PORTG
-	help
-	  Select PORT used for SPORT0. See Hardware Reference Manual
-
-config BF527_SPORT0_PORTF
-	bool "PORT F"
-	help
-	  PORT F
-
-config BF527_SPORT0_PORTG
-	bool "PORT G"
-	help
-	  PORT G
-endchoice
-
-choice
-	prompt "SPORT0 TSCLK Location"
-	depends on BF527_SPORT0_PORTG
-	default BF527_SPORT0_TSCLK_PG10
-	help
-	  Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual
-
-config BF527_SPORT0_TSCLK_PG10
-	bool "PORT PG10"
-	help
-	  PORT PG10
-
-config BF527_SPORT0_TSCLK_PG14
-	bool "PORT PG14"
-	help
-	  PORT PG14
-endchoice
-
-choice
-	prompt "UART1"
-	default BF527_UART1_PORTF
-	help
-	  Select PORT used for UART1. See Hardware Reference Manual
-
-config BF527_UART1_PORTF
-	bool "PORT F"
-	help
-	  PORT F
-
-config BF527_UART1_PORTG
-	bool "PORT G"
-	help
-	  PORT G
-endchoice
-
-choice
-	prompt "NAND (NFC) Data"
-	default BF527_NAND_D_PORTH
-	help
-	  Select PORT used for NAND Data Bus. See Hardware Reference Manual
-
-config BF527_NAND_D_PORTF
-	bool "PORT F"
-	help
-	  PORT F
-
-config BF527_NAND_D_PORTH
-	bool "PORT H"
-	help
-	  PORT H
-endchoice
-
-comment "Hysteresis/Schmitt Trigger Control"
-config BFIN_HYSTERESIS_CONTROL
-	bool "Enable Hysteresis Control"
-	help
-	  The ADSP-BF52x allows to control input hysteresis for Port F,
-	  Port G and Port H and other processor signal inputs.
-	  The Schmitt trigger enables can be set only for pin groups.
-	  Saying Y will overwrite the default reset or boot loader
-	  initialization.
-
-menu "PORT F"
-	depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTF_0_7
-	bool "Enable Hysteresis on PORTF {0...7}"
-config GPIO_HYST_PORTF_8_9
-	bool "Enable Hysteresis on PORTF {8, 9}"
-config GPIO_HYST_PORTF_10
-	bool "Enable Hysteresis on PORTF 10"
-config GPIO_HYST_PORTF_11
-	bool "Enable Hysteresis on PORTF 11"
-config GPIO_HYST_PORTF_12_13
-	bool "Enable Hysteresis on PORTF {12, 13}"
-config GPIO_HYST_PORTF_14_15
-	bool "Enable Hysteresis on PORTF {14, 15}"
-endmenu
-
-menu "PORT G"
-	depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTG_0
-	bool "Enable Hysteresis on PORTG 0"
-config GPIO_HYST_PORTG_1_4
-	bool "Enable Hysteresis on PORTG {1...4}"
-config GPIO_HYST_PORTG_5_6
-	bool "Enable Hysteresis on PORTG {5, 6}"
-config GPIO_HYST_PORTG_7_8
-	bool "Enable Hysteresis on PORTG {7, 8}"
-config GPIO_HYST_PORTG_9
-	bool "Enable Hysteresis on PORTG 9"
-config GPIO_HYST_PORTG_10
-	bool "Enable Hysteresis on PORTG 10"
-config GPIO_HYST_PORTG_11_13
-	bool "Enable Hysteresis on PORTG {11...13}"
-config GPIO_HYST_PORTG_14_15
-	bool "Enable Hysteresis on PORTG {14, 15}"
-endmenu
-
-menu "PORT H"
-	depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTH_0_7
-	bool "Enable Hysteresis on PORTH {0...7}"
-config GPIO_HYST_PORTH_8
-	bool "Enable Hysteresis on PORTH 8"
-config GPIO_HYST_PORTH_9_15
-	bool "Enable Hysteresis on PORTH {9...15}"
-endmenu
-
-menu "None-GPIO"
-	depends on BFIN_HYSTERESIS_CONTROL
-config NONEGPIO_HYST_TMR0_FS1_PPICLK
-	bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
-config NONEGPIO_HYST_NMI_RST_BMODE
-	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
-config NONEGPIO_HYST_JTAG
-	bool "Enable Hysteresis on JTAG"
-endmenu
-
-comment "Interrupt Priority Assignment"
-menu "Priority"
-
-config IRQ_PLL_WAKEUP
-	int "IRQ_PLL_WAKEUP"
-	default 7
-config IRQ_DMA0_ERROR
-	int "IRQ_DMA0_ERROR"
-	default 7
-config IRQ_DMAR0_BLK
-	int "IRQ_DMAR0_BLK"
-	default 7
-config IRQ_DMAR1_BLK
-	int "IRQ_DMAR1_BLK"
-	default 7
-config IRQ_DMAR0_OVR
-	int "IRQ_DMAR0_OVR"
-	default 7
-config IRQ_DMAR1_OVR
-	int "IRQ_DMAR1_OVR"
-	default 7
-config IRQ_PPI_ERROR
-	int "IRQ_PPI_ERROR"
-	default 7
-config IRQ_MAC_ERROR
-	int "IRQ_MAC_ERROR"
-	default 7
-config IRQ_SPORT0_ERROR
-	int "IRQ_SPORT0_ERROR"
-	default 7
-config IRQ_SPORT1_ERROR
-	int "IRQ_SPORT1_ERROR"
-	default 7
-config IRQ_UART0_ERROR
-	int "IRQ_UART0_ERROR"
-	default 7
-config IRQ_UART1_ERROR
-	int "IRQ_UART1_ERROR"
-	default 7
-config IRQ_RTC
-	int "IRQ_RTC"
-	default 8
-config IRQ_PPI
-	int "IRQ_PPI"
-	default 8
-config IRQ_SPORT0_RX
-	int "IRQ_SPORT0_RX"
-	default 9
-config IRQ_SPORT0_TX
-	int "IRQ_SPORT0_TX"
-	default 9
-config IRQ_SPORT1_RX
-	int "IRQ_SPORT1_RX"
-	default 9
-config IRQ_SPORT1_TX
-	int "IRQ_SPORT1_TX"
-	default 9
-config IRQ_TWI
-	int "IRQ_TWI"
-	default 10
-config IRQ_SPI
-	int "IRQ_SPI"
-	default 10
-config IRQ_UART0_RX
-	int "IRQ_UART0_RX"
-	default 10
-config IRQ_UART0_TX
-	int "IRQ_UART0_TX"
-	default 10
-config IRQ_UART1_RX
-	int "IRQ_UART1_RX"
-	default 10
-config IRQ_UART1_TX
-	int "IRQ_UART1_TX"
-	default 10
-config IRQ_OPTSEC
-	int "IRQ_OPTSEC"
-	default 11
-config IRQ_CNT
-	int "IRQ_CNT"
-	default 11
-config IRQ_MAC_RX
-	int "IRQ_MAC_RX"
-	default 11
-config IRQ_PORTH_INTA
-	int "IRQ_PORTH_INTA"
-	default 11
-config IRQ_MAC_TX
-	int "IRQ_MAC_TX/NFC"
-	default 11
-config IRQ_PORTH_INTB
-	int "IRQ_PORTH_INTB"
-	default 11
-config IRQ_TIMER0
-	int "IRQ_TIMER0"
-	default 7 if TICKSOURCE_GPTMR0
-	default 8
-config IRQ_TIMER1
-	int "IRQ_TIMER1"
-	default 12
-config IRQ_TIMER2
-	int "IRQ_TIMER2"
-	default 12
-config IRQ_TIMER3
-	int "IRQ_TIMER3"
-	default 12
-config IRQ_TIMER4
-	int "IRQ_TIMER4"
-	default 12
-config IRQ_TIMER5
-	int "IRQ_TIMER5"
-	default 12
-config IRQ_TIMER6
-	int "IRQ_TIMER6"
-	default 12
-config IRQ_TIMER7
-	int "IRQ_TIMER7"
-	default 12
-config IRQ_PORTG_INTA
-	int "IRQ_PORTG_INTA"
-	default 12
-config IRQ_PORTG_INTB
-	int "IRQ_PORTG_INTB"
-	default 12
-config IRQ_MEM_DMA0
-	int "IRQ_MEM_DMA0"
-	default 13
-config IRQ_MEM_DMA1
-	int "IRQ_MEM_DMA1"
-	default 13
-config IRQ_WATCH
-	int "IRQ_WATCH"
-	default 13
-config IRQ_PORTF_INTA
-	int "IRQ_PORTF_INTA"
-	default 13
-config IRQ_PORTF_INTB
-	int "IRQ_PORTF_INTB"
-	default 13
-config IRQ_SPI_ERROR
-	int "IRQ_SPI_ERROR"
-	default 7
-config IRQ_NFC_ERROR
-	int "IRQ_NFC_ERROR"
-	default 7
-config IRQ_HDMA_ERROR
-	int "IRQ_HDMA_ERROR"
-	default 7
-config IRQ_HDMA
-	int "IRQ_HDMA"
-	default 7
-config IRQ_USB_EINT
-	int "IRQ_USB_EINT"
-	default 10
-config IRQ_USB_INT0
-	int "IRQ_USB_INT0"
-	default 10
-config IRQ_USB_INT1
-	int "IRQ_USB_INT1"
-	default 10
-config IRQ_USB_INT2
-	int "IRQ_USB_INT2"
-	default 10
-config IRQ_USB_DMA
-	int "IRQ_USB_DMA"
-	default 10
-
-	help
-	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
-	  This applies to all the above.  It is not recommended to assign the
-	  highest priority number 7 to UART or any other device.
-
-endmenu
-
-endmenu
-
-endif
diff --git a/arch/blackfin/mach-bf527/Makefile b/arch/blackfin/mach-bf527/Makefile
deleted file mode 100644
index 4a6cdafab8ce..000000000000
--- a/arch/blackfin/mach-bf527/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# arch/blackfin/mach-bf527/Makefile
-#
-
-obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
deleted file mode 100644
index a76f02fae11c..000000000000
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-choice
-	prompt "System type"
-	default BFIN527_EZKIT
-	help
-	  Select your board!
-
-config BFIN527_EZKIT
-	bool "BF527-EZKIT"
-	help
-	  BF527-EZKIT-LITE board support.
-
-config BFIN527_EZKIT_V2
-	bool "BF527-EZKIT-V2"
-	help
-	  BF527-EZKIT-LITE V2.1+ board support.
-
-config BFIN527_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF527"
-	help
-	  CM-BF527 support for EVAL- and DEV-Board.
-
-config BFIN526_EZBRD
-	bool "BF526-EZBRD"
-	help
-	  BF526-EZBRD/EZKIT Lite board support.
-
-config BFIN527_AD7160EVAL
-	bool "BF527-AD7160-EVAL"
-	help
-	  BF527-AD7160-EVAL board support.
-
-config BFIN527_TLL6527M
-	bool "The Learning Labs TLL6527M"
-	help
-	  TLL6527M V1.0 platform support
-
-endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
deleted file mode 100644
index 6ada1537e20a..000000000000
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# arch/blackfin/mach-bf527/boards/Makefile
-#
-
-obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
-obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o
-obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
-obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
-obj-$(CONFIG_BFIN527_AD7160EVAL)       += ad7160eval.o
-obj-$(CONFIG_BFIN527_TLL6527M)         += tll6527m.o
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
deleted file mode 100644
index 68f2a8a806ea..000000000000
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ /dev/null
@@ -1,868 +0,0 @@
-/*
- * Copyright 2004-20010 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF527-AD7160EVAL";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PG13,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
-static struct resource bf52x_ra158z_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf52x_ra158z_device = {
-	.name		= "bfin-ra158z",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bf52x_ra158z_resources),
-	.resource	= bf52x_ra158z_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ad7160eval_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ad7160eval_flash_data = {
-	.width      = 2,
-	.parts      = ad7160eval_partitions,
-	.nr_parts   = ARRAY_SIZE(ad7160eval_partitions),
-};
-
-static struct resource ad7160eval_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x203fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ad7160eval_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ad7160eval_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ad7160eval_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "linux kernel(nand)",
-		.offset = 0,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = NFC_CTL,
-		.end = NFC_DATA_RD + 2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
-	.name = "bfin-i2s",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
-	{
-		.modalias = "ad183x",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-	},
-#endif
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 30000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = GPIO_PH3 + MAX_CTRL_CS,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PF9,
-		.end = GPIO_PF9,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
-#include <linux/input/ad7160.h>
-static const struct ad7160_platform_data bfin_ad7160_ts_info = {
-	.sensor_x_res = 854,
-	.sensor_y_res = 480,
-	.pressure = 100,
-	.filter_coef = 3,
-	.coord_pref = AD7160_ORIG_TOP_LEFT,
-	.first_touch_window = 5,
-	.move_window = 3,
-	.event_cabs = AD7160_EMIT_ABS_MT_TRACKING_ID |
-			AD7160_EMIT_ABS_MT_PRESSURE |
-			AD7160_TRACKING_ID_ASCENDING,
-	.finger_act_ctrl = 0x64,
-	.haptic_effect1_ctrl = AD7160_HAPTIC_SLOT_A(60) |
-				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
-				AD7160_HAPTIC_SLOT_B(60) |
-				AD7160_HAPTIC_SLOT_B_LVL_LOW,
-
-	.haptic_effect2_ctrl = AD7160_HAPTIC_SLOT_A(20) |
-				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
-				AD7160_HAPTIC_SLOT_B(80) |
-				AD7160_HAPTIC_SLOT_B_LVL_LOW |
-				AD7160_HAPTIC_SLOT_C(120) |
-				AD7160_HAPTIC_SLOT_C_LVL_HIGH |
-				AD7160_HAPTIC_SLOT_D(30) |
-				AD7160_HAPTIC_SLOT_D_LVL_LOW,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
-	{
-		I2C_BOARD_INFO("ad7160", 0x33),
-		.irq = IRQ_PH1,
-		.platform_data = (void *)&bfin_ad7160_ts_info,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <linux/platform_data/bfin_rotary.h>
-
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
-
-static struct bfin_rotary_platform_data bfin_rotary_data = {
-	/*.rotary_up_key     = KEY_UP,*/
-	/*.rotary_down_key   = KEY_DOWN,*/
-	.rotary_rel_code   = REL_WHEEL,
-	.rotary_button_key = KEY_ENTER,
-	.debounce	   = 10,	/* 0..17 */
-	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
-	.pm_wakeup	   = 1,
-	.pin_list	   = per_cnt,
-};
-
-static struct resource bfin_rotary_resources[] = {
-	{
-		.start = CNT_CONFIG,
-		.end   = CNT_CONFIG + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CNT,
-		.end = IRQ_CNT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_rotary_device = {
-	.name		= "bfin-rotary",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bfin_rotary_resources),
-	.resource	= bfin_rotary_resources,
-	.dev		= {
-		.platform_data = &bfin_rotary_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] = {
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *stamp_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-	&bf5xx_nand_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
-	&bf52x_ra158z_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-	&bfin_rotary_device,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ad7160eval_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s,
-#endif
-};
-
-static int __init ad7160eval_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(ad7160eval_init);
-
-static struct platform_device *ad7160eval_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ad7160eval_early_devices,
-		ARRAY_SIZE(ad7160eval_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	/* the MAC is stored in OTP memory page 0xDF */
-	u32 ret;
-	u64 otp_mac;
-	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
-
-	ret = otp_read(0xDF, 0x00, &otp_mac);
-	if (!(ret & 0x1)) {
-		char *otp_mac_p = (char *)&otp_mac;
-		for (ret = 0; ret < 6; ++ret)
-			addr[ret] = otp_mac_p[5 - ret];
-	}
-	return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
deleted file mode 100644
index b1004b35db36..000000000000
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ /dev/null
@@ -1,992 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *           2008-2009 Bluetechnix
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/etherdevice.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "Bluetechnix CM-BF527";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "mc"
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "dma"
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PF11,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "linux kernel(nand)",
-		.offset = 0,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = NFC_CTL,
-		.end = NFC_DATA_RD + 2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB804,
-		.end	= 0x203FB804 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
-	{
-		.modalias = "ad183x",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-	},
-#endif
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 5,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF8,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 2,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-	{
-		.modalias	= "wm8731",
-		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select    = 5,
-		.mode = SPI_MODE_0,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
-static struct mtd_partition cm_partitions[] = {
-	{
-		.name   = "bootloader(nor)",
-		.size   = 0x40000,
-		.offset = 0,
-	}, {
-		.name   = "linux kernel(nor)",
-		.size   = 0x100000,
-		.offset = MTDPART_OFS_APPEND,
-	}, {
-		.name   = "file system(nor)",
-		.size   = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data cm_flash_data = {
-	.width    = 2,
-	.parts    = cm_partitions,
-	.nr_parts = ARRAY_SIZE(cm_partitions),
-};
-
-static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 };
-
-static struct resource cm_flash_resource[] = {
-	{
-		.name  = "cfi_probe",
-		.start = 0x20000000,
-		.end   = 0x201fffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = (unsigned long)cm_flash_gpios,
-		.end   = ARRAY_SIZE(cm_flash_gpios),
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device cm_flash_device = {
-	.name          = "gpio-addr-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &cm_flash_data,
-	},
-	.num_resources = ARRAY_SIZE(cm_flash_resource),
-	.resource      = cm_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PF9,
-		.end = GPIO_PF9,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-#if IS_ENABLED(CONFIG_INPUT_PCF8574)
-	{
-		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = IRQ_PF8,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
-	{
-		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *cmbf527_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-	&bf5xx_nand_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-	&bfin_isp1760_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-	&dm9000_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-	&net2272_bfin_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
-	&cm_flash_device,
-#endif
-};
-
-static int __init cm_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices));
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(cm_init);
-
-static struct platform_device *cmbf527_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(cmbf527_early_devices,
-		ARRAY_SIZE(cmbf527_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	return 1;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
deleted file mode 100644
index 80bcfd1d023e..000000000000
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ /dev/null
@@ -1,891 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF526-EZBRD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "mc"
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "dma"
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PG13,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezbrd_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezbrd_flash_data = {
-	.width      = 2,
-	.parts      = ezbrd_partitions,
-	.nr_parts   = ARRAY_SIZE(ezbrd_partitions),
-};
-
-static struct resource ezbrd_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x203fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezbrd_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezbrd_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezbrd_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "bootloader(nand)",
-		.offset = 0,
-		.size = 0x40000,
-	}, {
-		.name = "linux kernel(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = NFC_CTL,
-		.end = NFC_DATA_RD + 2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "sst25wf040",
-};
-
-/* SPI flash chip (sst25wf040) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_export		= 1,	/* Export GPIO to gpiolib */
-	.gpio_base		= -1,	/* Dynamic allocation */
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 5,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF8,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 2,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PG0,
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 5,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-	{
-		.modalias	= "wm8731",
-		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select    = 5,
-		.mode = SPI_MODE_0,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PG0,
-		.end = GPIO_PG0,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-#if IS_ENABLED(CONFIG_INPUT_PCF8574)
-	{
-		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = IRQ_PF8,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
-	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_16_BIT_PPI,
-	.use_bl = 1,
-	.gpio_bl = GPIO_PG12,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource 	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-	&bf5xx_nand_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ezbrd_flash_device,
-#endif
-};
-
-static int __init ezbrd_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(ezbrd_init);
-
-static struct platform_device *ezbrd_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ezbrd_early_devices,
-		ARRAY_SIZE(ezbrd_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	/* the MAC is stored in OTP memory page 0xDF */
-	u32 ret;
-	u64 otp_mac;
-	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
-
-	ret = otp_read(0xDF, 0x00, &otp_mac);
-	if (!(ret & 0x1)) {
-		char *otp_mac_p = (char *)&otp_mac;
-		for (ret = 0; ret < 6; ++ret)
-			addr[ret] = otp_mac_p[5 - ret];
-	}
-	return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
deleted file mode 100644
index 571edfd2ecf3..000000000000
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ /dev/null
@@ -1,1335 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
-#include <asm/bfin_sport.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-#ifdef CONFIG_BFIN527_EZKIT_V2
-const char bfin_board_name[] = "ADI BF527-EZKIT V2";
-#else
-const char bfin_board_name[] = "ADI BF527-EZKIT";
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "mc"
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "dma"
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PG13,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
-
-static struct resource bf52x_t350mcqb_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf52x_t350mcqb_device = {
-	.name		= "bfin-t350mcqb",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bf52x_t350mcqb_resources),
-	.resource 	= bf52x_t350mcqb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_8_BIT_PPI,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x203fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "bootloader(nand)",
-		.offset = 0,
-		.size = 0x40000,
-	}, {
-		.name = "linux kernel(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = NFC_CTL,
-		.end = NFC_DATA_RD + 2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 1,
-		.flags = IORESOURCE_BUS,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_export		= 0,	/* Export GPIO to gpiolib */
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-
-static const u16 bfin_snd_pin[][7] = {
-	{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-		P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
-	{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-		P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
-};
-
-static struct bfin_snd_platform_data bfin_snd_data[] = {
-	{
-		.pin_req = &bfin_snd_pin[0][0],
-	},
-	{
-		.pin_req = &bfin_snd_pin[1][0],
-	},
-};
-
-#define BFIN_SND_RES(x) \
-	[x] = { \
-		{ \
-			.start = SPORT##x##_TCR1, \
-			.end = SPORT##x##_TCR1, \
-			.flags = IORESOURCE_MEM \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_RX, \
-			.end = CH_SPORT##x##_RX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_TX, \
-			.end = CH_SPORT##x##_TX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = IRQ_SPORT##x##_ERROR, \
-			.end = IRQ_SPORT##x##_ERROR, \
-			.flags = IORESOURCE_IRQ, \
-		} \
-	}
-
-static struct resource bfin_snd_resources[][4] = {
-	BFIN_SND_RES(0),
-	BFIN_SND_RES(1),
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s_pcm = {
-	.name = "bfin-i2s-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-static struct platform_device bfin_ac97_pcm = {
-	.name = "bfin-ac97-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
-	.name = "bfin-i2s",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
-	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
-	.dev = {
-		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-static const char * const ad1836_link[] = {
-	"bfin-i2s.0",
-	"spi0.4",
-};
-static struct platform_device bfin_ad1836_machine = {
-	.name = "bfin-snd-ad1836",
-	.id = -1,
-	.dev = {
-		.platform_data = (void *)ad1836_link,
-	},
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
-	{
-		.modalias = "ad183x",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-		.platform_data = "ad1836",
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 3,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_0,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF8,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 2,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PF8,
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 3,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 7,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PF9,
-		.end = GPIO_PF9,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_PMIC_ADP5520)
-#include <linux/mfd/adp5520.h>
-
-	/*
-	 *  ADP5520/5501 LEDs Data
-	 */
-
-static struct led_info adp5520_leds[] = {
-	{
-		.name = "adp5520-led1",
-		.default_trigger = "none",
-		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
-	},
-};
-
-static struct adp5520_leds_platform_data adp5520_leds_data = {
-	.num_leds = ARRAY_SIZE(adp5520_leds),
-	.leds = adp5520_leds,
-	.fade_in = ADP5520_FADE_T_600ms,
-	.fade_out = ADP5520_FADE_T_600ms,
-	.led_on_time = ADP5520_LED_ONT_600ms,
-};
-
-	/*
-	 *  ADP5520 Keypad Data
-	 */
-
-static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
-	[ADP5520_KEY(3, 3)]	= KEY_1,
-	[ADP5520_KEY(2, 3)]	= KEY_2,
-	[ADP5520_KEY(1, 3)]	= KEY_3,
-	[ADP5520_KEY(0, 3)]	= KEY_UP,
-	[ADP5520_KEY(3, 2)]	= KEY_4,
-	[ADP5520_KEY(2, 2)]	= KEY_5,
-	[ADP5520_KEY(1, 2)]	= KEY_6,
-	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
-	[ADP5520_KEY(3, 1)]	= KEY_7,
-	[ADP5520_KEY(2, 1)]	= KEY_8,
-	[ADP5520_KEY(1, 1)]	= KEY_9,
-	[ADP5520_KEY(0, 1)]	= KEY_DOT,
-	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
-	[ADP5520_KEY(2, 0)]	= KEY_0,
-	[ADP5520_KEY(1, 0)]	= KEY_HELP,
-	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
-};
-
-static struct adp5520_keys_platform_data adp5520_keys_data = {
-	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
-	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
-	.keymap		= adp5520_keymap,
-	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
-	.repeat		= 0,
-};
-
-	/*
-	 *  ADP5520/5501 Multifunction Device Init Data
-	 */
-
-static struct adp5520_platform_data adp5520_pdev_data = {
-	.leds = &adp5520_leds_data,
-	.keys = &adp5520_keys_data,
-};
-
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-#if IS_ENABLED(CONFIG_INPUT_PCF8574)
-	{
-		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = IRQ_PF8,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
-	{
-		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
-	{
-		I2C_BOARD_INFO("ad7879", 0x2C),
-		.irq = IRQ_PF8,
-		.platform_data = (void *)&bfin_ad7879_ts_info,
-	},
-#endif
-#if IS_ENABLED(CONFIG_PMIC_ADP5520)
-	{
-		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF9,
-		.platform_data = (void *)&adp5520_pdev_data,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
-	{
-		I2C_BOARD_INFO("ssm2602", 0x1b),
-	},
-#endif
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("ad5252", 0x2f),
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
-	{
-		I2C_BOARD_INFO("adau1373", 0x1A),
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
-	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <linux/platform_data/bfin_rotary.h>
-
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
-
-static struct bfin_rotary_platform_data bfin_rotary_data = {
-	/*.rotary_up_key     = KEY_UP,*/
-	/*.rotary_down_key   = KEY_DOWN,*/
-	.rotary_rel_code   = REL_WHEEL,
-	.rotary_button_key = KEY_ENTER,
-	.debounce	   = 10,	/* 0..17 */
-	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
-	.pm_wakeup	   = 1,
-	.pin_list	   = per_cnt,
-};
-
-static struct resource bfin_rotary_resources[] = {
-	{
-		.start = CNT_CONFIG,
-		.end   = CNT_CONFIG + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CNT,
-		.end = IRQ_CNT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_rotary_device = {
-	.name		= "bfin-rotary",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
-	.resource 	= bfin_rotary_resources,
-	.dev		= {
-		.platform_data = &bfin_rotary_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *stamp_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-	&bf5xx_nand_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-	&bfin_isp1760_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-	&dm9000_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-	&net2272_bfin_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
-	&bf52x_t350mcqb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-	&bfin_rotary_device,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ezkit_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-	&bfin_ac97_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-	&bfin_ad1836_machine,
-#endif
-};
-
-static int __init ezkit_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(ezkit_init);
-
-static struct platform_device *ezkit_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ezkit_early_devices,
-		ARRAY_SIZE(ezkit_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	/* the MAC is stored in OTP memory page 0xDF */
-	u32 ret;
-	u64 otp_mac;
-	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
-
-	ret = otp_read(0xDF, 0x00, &otp_mac);
-	if (!(ret & 0x1)) {
-		char *otp_mac_p = (char *)&otp_mac;
-		for (ret = 0; ret < 6; ++ret)
-			addr[ret] = otp_mac_p[5 - ret];
-	}
-	return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
deleted file mode 100644
index ce5488e8226b..000000000000
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ /dev/null
@@ -1,946 +0,0 @@
-/* File:	arch/blackfin/mach-bf527/boards/tll6527m.c
- * Based on:	arch/blackfin/mach-bf527/boards/ezkit.c
- * Author:	Ashish Gupta
- *
- * Copyright: 2010 - The Learning Labs Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-#define LCD_BACKLIGHT_GPIO 0x40
-/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
- * LCD Backlight Enable
- */
-#endif
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "TLL6527M";
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	/*.gpio_vrsel	= GPIO_PG13,*/
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_16_BIT_PPI,
-	.use_bl = 1,
-	.gpio_bl = LCD_BACKLIGHT_GPIO,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
-static struct mtd_partition tll6527m_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0xA0000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0xD00000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data tll6527m_flash_data = {
-	.width      = 2,
-	.parts      = tll6527m_partitions,
-	.nr_parts   = ARRAY_SIZE(tll6527m_partitions),
-};
-
-static unsigned tll6527m_flash_gpios[] = { GPIO_PG11, GPIO_PH11, GPIO_PH12 };
-
-static struct resource tll6527m_flash_resource[] = {
-	{
-		.name  = "cfi_probe",
-		.start = 0x20000000,
-		.end   = 0x201fffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = (unsigned long)tll6527m_flash_gpios,
-		.end   = ARRAY_SIZE(tll6527m_flash_gpios),
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device tll6527m_flash_device = {
-	.name          = "gpio-addr-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &tll6527m_flash_data,
-	},
-	.num_resources = ARRAY_SIZE(tll6527m_flash_resource),
-	.resource      = tll6527m_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_GPIO_DECODER)
-/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
- * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
- * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
- * used as SPI CS lines, this should be > MAX_BLACKFIN_GPIOS
- */
-#include <linux/gpio-decoder.h>
-#define EXP_GPIO_SPISEL_BASE 0x64
-static unsigned gpio_addr_inputs[] = {
-	GPIO_PG1, GPIO_PH9, GPIO_PH10
-};
-
-static struct gpio_decoder_platform_data spi_decoded_cs = {
-	.base		= EXP_GPIO_SPISEL_BASE,
-	.input_addrs	= gpio_addr_inputs,
-	.nr_input_addrs = ARRAY_SIZE(gpio_addr_inputs),
-	.default_output	= 0,
-/*	.default_output = (1 << ARRAY_SIZE(gpio_addr_inputs)) - 1 */
-};
-
-static struct platform_device spi_decoded_gpio = {
-	.name	= "gpio-decoder",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &spi_decoded_cs,
-	},
-};
-
-#else
-#define EXP_GPIO_SPISEL_BASE 0x0
-
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
-#include <linux/input/adxl34x.h>
-static const struct adxl34x_platform_data adxl345_info = {
-	.x_axis_offset = 0,
-	.y_axis_offset = 0,
-	.z_axis_offset = 0,
-	.tap_threshold = 0x31,
-	.tap_duration = 0x10,
-	.tap_latency = 0x60,
-	.tap_window = 0xF0,
-	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
-	.act_axis_control = 0xFF,
-	.activity_threshold = 5,
-	.inactivity_threshold = 2,
-	.inactivity_time = 2,
-	.free_fall_threshold = 0x7,
-	.free_fall_time = 0x20,
-	.data_rate = 0x8,
-	.data_range = ADXL_FULL_RES,
-
-	.ev_type = EV_ABS,
-	.ev_code_x = ABS_X,		/* EV_REL */
-	.ev_code_y = ABS_Y,		/* EV_REL */
-	.ev_code_z = ABS_Z,		/* EV_REL */
-
-	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
-
-/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
-	.ev_code_act_inactivity = KEY_A,	/* EV_KEY */
-	.use_int2 = 1,
-	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
-	.fifo_mode = ADXL_FIFO_STREAM,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,
-				/* wait 512us before do a first conversion */
-	.acquisition_time	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging		= 1,
-				/* take the average of 4 middle samples */
-	.pen_down_acc_interval	= 255,	/* 9.4 ms */
-	.gpio_export		= 1,	/* configure AUX as GPIO output*/
-	.gpio_base		= LCD_BACKLIGHT_GPIO,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
-	.name = "bfin-i2s",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
-};
-#endif
-
-#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
-#include <linux/spi/mcp23s08.h>
-static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
-	.spi_present_mask = BIT(0),
-	.base = 0x30,
-};
-static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
-	.spi_present_mask = BIT(2),
-	.base = 0x38,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,
-				/* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS,
-		/* Can be connected to TLL6527M GPIO connector */
-		/* Either SPI_ADC or M25P80 FLASH can be installed at a time */
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-/*
- * TLL6527M V1.0 does not support SD Card at SPI Clock > 10 MHz due to
- * SPI buffer limitations
- */
-		.max_speed_hz = 10000000,
-					/* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x05 + MAX_CTRL_CS,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_0,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PH14,
-		.max_speed_hz = 5000000,
-					/* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x07 + MAX_CTRL_CS,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 10000000,
-		/* TLL6527Mv1-0 supports max spi clock (SCK) speed = 10 MHz */
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x03 + MAX_CTRL_CS,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x06 + MAX_CTRL_CS,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
-	{
-		.modalias = "mcp23s08",
-		.platform_data = &bfin_mcp23s08_sys_gpio_info,
-		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x01 + MAX_CTRL_CS,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-	{
-		.modalias = "mcp23s08",
-		.platform_data = &bfin_mcp23s08_usr_gpio_info,
-		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = EXP_GPIO_SPISEL_BASE + 0x02 + MAX_CTRL_CS,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
-	/* EXP_GPIO_SPISEL_BASE will be > MAX_BLACKFIN_GPIOS */
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals,
-					/* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PF9,
-		.end = GPIO_PF9,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals,
-						/* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
-	{
-		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
-	{
-		I2C_BOARD_INFO("ad7879", 0x2C),
-		.irq = IRQ_PH14,
-		.platform_data = (void *)&bfin_ad7879_ts_info,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
-	{
-		I2C_BOARD_INFO("ssm2602", 0x1b),
-	},
-#endif
-	{
-		I2C_BOARD_INFO("adm1192", 0x2e),
-	},
-
-	{
-		I2C_BOARD_INFO("ltc3576", 0x09),
-	},
-#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
-	{
-		I2C_BOARD_INFO("adxl34x", 0x53),
-		.irq = IRQ_PH13,
-		.platform_data = (void *)&adxl345_info,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals,
-		/* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals,
-		/* Passed to driver */
-	},
-};
-#endif
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] = {
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *tll6527m_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
-	&tll6527m_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_GPIO_DECODER)
-	&spi_decoded_gpio,
-#endif
-};
-
-static int __init tll6527m_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(tll6527m_devices, ARRAY_SIZE(tll6527m_devices));
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(tll6527m_init);
-
-static struct platform_device *tll6527m_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(tll6527m_early_devices,
-		ARRAY_SIZE(tll6527m_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	/* the MAC is stored in OTP memory page 0xDF */
-	u32 ret;
-	u64 otp_mac;
-	u32 (*otp_read)(u32 page, u32 flags,
-			u64 *page_content) = (void *)0xEF00001A;
-
-	ret = otp_read(0xDF, 0x00, &otp_mac);
-	if (!(ret & 0x1)) {
-		char *otp_mac_p = (char *)&otp_mac;
-		for (ret = 0; ret < 6; ++ret)
-			addr[ret] = otp_mac_p[5 - ret];
-	}
-	return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c
deleted file mode 100644
index 1fabdefea73a..000000000000
--- a/arch/blackfin/mach-bf527/dma.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * This file contains the simple DMA Implementation for Blackfin
- *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-
-#include <asm/blackfin.h>
-#include <asm/dma.h>
-
-struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
-	(struct dma_register *) DMA0_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_NEXT_DESC_PTR,
-	(struct dma_register *) DMA3_NEXT_DESC_PTR,
-	(struct dma_register *) DMA4_NEXT_DESC_PTR,
-	(struct dma_register *) DMA5_NEXT_DESC_PTR,
-	(struct dma_register *) DMA6_NEXT_DESC_PTR,
-	(struct dma_register *) DMA7_NEXT_DESC_PTR,
-	(struct dma_register *) DMA8_NEXT_DESC_PTR,
-	(struct dma_register *) DMA9_NEXT_DESC_PTR,
-	(struct dma_register *) DMA10_NEXT_DESC_PTR,
-	(struct dma_register *) DMA11_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
-};
-EXPORT_SYMBOL(dma_io_base_addr);
-
-int channel2irq(unsigned int channel)
-{
-	int ret_irq = -1;
-
-	switch (channel) {
-	case CH_PPI:
-		ret_irq = IRQ_PPI;
-		break;
-
-	case CH_EMAC_RX:
-		ret_irq = IRQ_MAC_RX;
-		break;
-
-	case CH_EMAC_TX:
-		ret_irq = IRQ_MAC_TX;
-		break;
-
-	case CH_UART1_RX:
-		ret_irq = IRQ_UART1_RX;
-		break;
-
-	case CH_UART1_TX:
-		ret_irq = IRQ_UART1_TX;
-		break;
-
-	case CH_SPORT0_RX:
-		ret_irq = IRQ_SPORT0_RX;
-		break;
-
-	case CH_SPORT0_TX:
-		ret_irq = IRQ_SPORT0_TX;
-		break;
-
-	case CH_SPORT1_RX:
-		ret_irq = IRQ_SPORT1_RX;
-		break;
-
-	case CH_SPORT1_TX:
-		ret_irq = IRQ_SPORT1_TX;
-		break;
-
-	case CH_SPI:
-		ret_irq = IRQ_SPI;
-		break;
-
-	case CH_UART0_RX:
-		ret_irq = IRQ_UART0_RX;
-		break;
-
-	case CH_UART0_TX:
-		ret_irq = IRQ_UART0_TX;
-		break;
-
-	case CH_MEM_STREAM0_SRC:
-	case CH_MEM_STREAM0_DEST:
-		ret_irq = IRQ_MEM_DMA0;
-		break;
-
-	case CH_MEM_STREAM1_SRC:
-	case CH_MEM_STREAM1_DEST:
-		ret_irq = IRQ_MEM_DMA1;
-		break;
-	}
-	return ret_irq;
-}
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
deleted file mode 100644
index 2f9cc33deec4..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * DO NOT EDIT THIS FILE
- * This file is under version control at
- *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
- * and can be replaced with that version at any time
- * DO NOT EDIT THIS FILE
- *
- * Copyright 2004-2011 Analog Devices Inc.
- * Licensed under the Clear BSD license.
- */
-
-/* This file should be up to date with:
- *  - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List
- */
-
-#ifndef _MACH_ANOMALY_H_
-#define _MACH_ANOMALY_H_
-
-/* We do not support old silicon - sorry */
-#if __SILICON_REVISION__ < 0
-# error will not work on BF526/BF527 silicon version
-#endif
-
-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-# define ANOMALY_BF526 1
-#else
-# define ANOMALY_BF526 0
-#endif
-#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
-# define ANOMALY_BF527 1
-#else
-# define ANOMALY_BF527 0
-#endif
-
-#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
-#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
-#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
-
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
-#define ANOMALY_05000074 (1)
-/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
-/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
-#define ANOMALY_05000122 (1)
-/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
-#define ANOMALY_05000245 (1)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
-#define ANOMALY_05000254 (1)
-/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (1)
-/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
-#define ANOMALY_05000310 (1)
-/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
-/* Host DMA Boot Modes Are Not Functional */
-#define ANOMALY_05000330 (_ANOMALY_BF527(< 2))
-/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
-/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
-/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
-/* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* USB Calibration Value to use */
-#define ANOMALY_05000346_value 0xE510
-/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
-/* Security Features Are Not Functional */
-#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
-/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
-/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
-/* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
-/* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
-/* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
-/* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
-/* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
-/* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
-/* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
-/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
-/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
-/* Log Buffer Not Functional */
-#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
-/* Hook Routine Not Functional */
-#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
-/* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
-/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
-/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
-/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
-/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
-#define ANOMALY_05000405 (1)
-/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
-#define ANOMALY_05000408 (1)
-/* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
-/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (_ANOMALY_BF526(< 1))
-/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Speculative Fetches Can Cause Undesired External FIFO Operations */
-#define ANOMALY_05000416 (1)
-/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
-/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
-#define ANOMALY_05000421 (1)
-/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
-/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
-/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
-#define ANOMALY_05000426 (1)
-/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
-/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
-#define ANOMALY_05000431 (1)
-/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
-/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
-#define ANOMALY_05000434 (1)
-/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* OTP Write Accesses Not Supported */
-#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
-/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
-#define ANOMALY_05000443 (1)
-/* The WURESET Bit in the SYSCR Register is not Functional */
-#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0))
-/* USB DMA Short Packet Data Corruption */
-#define ANOMALY_05000450 (1)
-/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
-#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0))
-/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
-#define ANOMALY_05000456 (1)
-/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
-#define ANOMALY_05000457 (1)
-/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
-#define ANOMALY_05000460 (1)
-/* False Hardware Error when RETI Points to Invalid Memory */
-#define ANOMALY_05000461 (1)
-/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
-#define ANOMALY_05000462 (1)
-/* USB Rx DMA Hang */
-#define ANOMALY_05000465 (1)
-/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
-#define ANOMALY_05000466 (1)
-/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */
-#define ANOMALY_05000467 (1)
-/* PLL Latches Incorrect Settings During Reset */
-#define ANOMALY_05000469 (1)
-/* Incorrect Default MSEL Value in PLL_CTL */
-#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
-/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
-#define ANOMALY_05000473 (1)
-/* Possible Lockup Condition when Modifying PLL from External Memory */
-#define ANOMALY_05000475 (1)
-/* TESTSET Instruction Cannot Be Interrupted */
-#define ANOMALY_05000477 (1)
-/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
-#define ANOMALY_05000481 (1)
-/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
-#define ANOMALY_05000483 (1)
-/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
-#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0))
-/* The CODEC Zero-Cross Detect Feature is not Functional */
-#define ANOMALY_05000487 (1)
-/* SPI Master Boot Can Fail Under Certain Conditions */
-#define ANOMALY_05000490 (1)
-/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
-#define ANOMALY_05000491 (1)
-/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
-#define ANOMALY_05000494 (1)
-/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */
-#define ANOMALY_05000498 (1)
-/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
-#define ANOMALY_05000501 (1)
-
-/* Anomalies that don't exist on this proc */
-#define ANOMALY_05000099 (0)
-#define ANOMALY_05000120 (0)
-#define ANOMALY_05000125 (0)
-#define ANOMALY_05000149 (0)
-#define ANOMALY_05000158 (0)
-#define ANOMALY_05000171 (0)
-#define ANOMALY_05000179 (0)
-#define ANOMALY_05000182 (0)
-#define ANOMALY_05000183 (0)
-#define ANOMALY_05000189 (0)
-#define ANOMALY_05000198 (0)
-#define ANOMALY_05000202 (0)
-#define ANOMALY_05000215 (0)
-#define ANOMALY_05000219 (0)
-#define ANOMALY_05000220 (0)
-#define ANOMALY_05000227 (0)
-#define ANOMALY_05000230 (0)
-#define ANOMALY_05000231 (0)
-#define ANOMALY_05000233 (0)
-#define ANOMALY_05000234 (0)
-#define ANOMALY_05000242 (0)
-#define ANOMALY_05000244 (0)
-#define ANOMALY_05000248 (0)
-#define ANOMALY_05000250 (0)
-#define ANOMALY_05000257 (0)
-#define ANOMALY_05000261 (0)
-#define ANOMALY_05000263 (0)
-#define ANOMALY_05000266 (0)
-#define ANOMALY_05000273 (0)
-#define ANOMALY_05000274 (0)
-#define ANOMALY_05000278 (0)
-#define ANOMALY_05000281 (0)
-#define ANOMALY_05000283 (0)
-#define ANOMALY_05000285 (0)
-#define ANOMALY_05000287 (0)
-#define ANOMALY_05000301 (0)
-#define ANOMALY_05000305 (0)
-#define ANOMALY_05000307 (0)
-#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
-#define ANOMALY_05000315 (0)
-#define ANOMALY_05000323 (0)
-#define ANOMALY_05000362 (1)
-#define ANOMALY_05000363 (0)
-#define ANOMALY_05000383 (0)
-#define ANOMALY_05000400 (0)
-#define ANOMALY_05000402 (0)
-#define ANOMALY_05000412 (0)
-#define ANOMALY_05000447 (0)
-#define ANOMALY_05000448 (0)
-#define ANOMALY_05000474 (0)
-#define ANOMALY_05000480 (0)
-#define ANOMALY_16000030 (0)
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
deleted file mode 100644
index 8ff155b34f64..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __MACH_BF527_H__
-#define __MACH_BF527_H__
-
-#define OFFSET_(x) ((x) & 0x0000FFFF)
-
-/*some misc defines*/
-#define IMASK_IVG15		0x8000
-#define IMASK_IVG14		0x4000
-#define IMASK_IVG13		0x2000
-#define IMASK_IVG12		0x1000
-
-#define IMASK_IVG11		0x0800
-#define IMASK_IVG10		0x0400
-#define IMASK_IVG9		0x0200
-#define IMASK_IVG8		0x0100
-
-#define IMASK_IVG7		0x0080
-#define IMASK_IVGTMR	0x0040
-#define IMASK_IVGHW		0x0020
-
-/***************************/
-
-#define BFIN_DSUBBANKS	4
-#define BFIN_DWAYS		2
-#define BFIN_DLINES		64
-#define BFIN_ISUBBANKS	4
-#define BFIN_IWAYS		4
-#define BFIN_ILINES		32
-
-#define WAY0_L			0x1
-#define WAY1_L			0x2
-#define WAY01_L			0x3
-#define WAY2_L			0x4
-#define WAY02_L			0x5
-#define	WAY12_L			0x6
-#define	WAY012_L		0x7
-
-#define	WAY3_L			0x8
-#define	WAY03_L			0x9
-#define	WAY13_L			0xA
-#define	WAY013_L		0xB
-
-#define	WAY32_L			0xC
-#define	WAY320_L		0xD
-#define	WAY321_L		0xE
-#define	WAYALL_L		0xF
-
-#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
-
-/********************************* EBIU Settings ************************************/
-#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
-#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
-
-#ifdef CONFIG_C_AMBEN_ALL
-#define V_AMBEN AMBEN_ALL
-#endif
-#ifdef CONFIG_C_AMBEN
-#define V_AMBEN 0x0
-#endif
-#ifdef CONFIG_C_AMBEN_B0
-#define V_AMBEN AMBEN_B0
-#endif
-#ifdef CONFIG_C_AMBEN_B0_B1
-#define V_AMBEN AMBEN_B0_B1
-#endif
-#ifdef CONFIG_C_AMBEN_B0_B1_B2
-#define V_AMBEN AMBEN_B0_B1_B2
-#endif
-#ifdef CONFIG_C_AMCKEN
-#define V_AMCKEN AMCKEN
-#else
-#define V_AMCKEN 0x0
-#endif
-#ifdef CONFIG_C_CDPRIO
-#define V_CDPRIO 0x100
-#else
-#define V_CDPRIO 0x0
-#endif
-
-#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
-
-/**************************** Hysteresis Settings ****************************/
-
-#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
-#ifdef CONFIG_GPIO_HYST_PORTF_0_7
-#define HYST_PORTF_0_7		(1 << 0)
-#else
-#define HYST_PORTF_0_7		(0 << 0)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTF_8_9
-#define HYST_PORTF_8_9		(1 << 2)
-#else
-#define HYST_PORTF_8_9		(0 << 2)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTF_10
-#define HYST_PORTF_10		(1 << 4)
-#else
-#define HYST_PORTF_10		(0 << 4)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTF_11
-#define HYST_PORTF_11		(1 << 6)
-#else
-#define HYST_PORTF_11		(0 << 6)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTF_12_13
-#define HYST_PORTF_12_13	(1 << 8)
-#else
-#define HYST_PORTF_12_13	(0 << 8)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTF_14_15
-#define HYST_PORTF_14_15	(1 << 10)
-#else
-#define HYST_PORTF_14_15	(0 << 10)
-#endif
-
-#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
-		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
-
-#ifdef CONFIG_GPIO_HYST_PORTG_0
-#define HYST_PORTG_0		(1 << 0)
-#else
-#define HYST_PORTG_0		(0 << 0)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_1_4
-#define HYST_PORTG_1_4		(1 << 2)
-#else
-#define HYST_PORTG_1_4		(0 << 2)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_5_6
-#define HYST_PORTG_5_6		(1 << 4)
-#else
-#define HYST_PORTG_5_6		(0 << 4)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_7_8
-#define HYST_PORTG_7_8		(1 << 6)
-#else
-#define HYST_PORTG_7_8		(0 << 6)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_9
-#define HYST_PORTG_9		(1 << 8)
-#else
-#define HYST_PORTG_9		(0 << 8)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_10
-#define HYST_PORTG_10		(1 << 10)
-#else
-#define HYST_PORTG_10		(0 << 10)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_11_13
-#define HYST_PORTG_11_13	(1 << 12)
-#else
-#define HYST_PORTG_11_13	(0 << 12)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTG_14_15
-#define HYST_PORTG_14_15	(1 << 14)
-#else
-#define HYST_PORTG_14_15	(0 << 14)
-#endif
-
-#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
-		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
-		HYST_PORTG_11_13 | HYST_PORTG_14_15)
-
-#ifdef CONFIG_GPIO_HYST_PORTH_0_7
-#define HYST_PORTH_0_7		(1 << 0)
-#else
-#define HYST_PORTH_0_7		(0 << 0)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTH_8
-#define HYST_PORTH_8		(1 << 2)
-#else
-#define HYST_PORTH_8		(0 << 2)
-#endif
-#ifdef CONFIG_GPIO_HYST_PORTH_9_15
-#define HYST_PORTH_9_15		(1 << 4)
-#else
-#define HYST_PORTH_9_15		(0 << 4)
-#endif
-
-#define HYST_PORTH_0_15	(HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15)
-
-#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK
-#define HYST_TMR0_FS1_PPICLK		(1 << 0)
-#else
-#define HYST_TMR0_FS1_PPICLK		(0 << 0)
-#endif
-#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
-#define HYST_NMI_RST_BMODE		(1 << 2)
-#else
-#define HYST_NMI_RST_BMODE		(0 << 2)
-#endif
-#ifdef CONFIG_NONEGPIO_HYST_JTAG
-#define HYST_JTAG			(1 << 4)
-#else
-#define HYST_JTAG			(0 << 4)
-#endif
-
-#define HYST_NONEGPIO	(HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG)
-#define HYST_NONEGPIO_MASK		(0x3F)
-#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
-
-#ifdef CONFIG_BF527
-#define CPU "BF527"
-#define CPUID 0x27e0
-#endif
-#ifdef CONFIG_BF526
-#define CPU "BF526"
-#define CPUID 0x27e4
-#endif
-#ifdef CONFIG_BF525
-#define CPU "BF525"
-#define CPUID 0x27e0
-#endif
-#ifdef CONFIG_BF524
-#define CPU "BF524"
-#define CPUID 0x27e4
-#endif
-#ifdef CONFIG_BF523
-#define CPU "BF523"
-#define CPUID 0x27e0
-#endif
-#ifdef CONFIG_BF522
-#define CPU "BF522"
-#define CPUID 0x27e4
-#endif
-
-#ifndef CPU
-#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
-#endif
-
-#endif				/* __MACH_BF527_H__  */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial.h
deleted file mode 100644
index 00c603fe8218..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * mach/bfin_serial.h - Blackfin UART/Serial definitions
- *
- * Copyright 2006-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_MACH_SERIAL_H__
-#define __BFIN_MACH_SERIAL_H__
-
-#define BFIN_UART_NR_PORTS	2
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
deleted file mode 100644
index e1d279274487..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _MACH_BLACKFIN_H_
-#define _MACH_BLACKFIN_H_
-
-#include "bf527.h"
-#include "anomaly.h"
-
-#include <asm/def_LPBlackfin.h>
-#if defined(CONFIG_BF523) || defined(CONFIG_BF522)
-# include "defBF522.h"
-#endif
-#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
-# include "defBF525.h"
-#endif
-#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
-# include "defBF527.h"
-#endif
-
-#if !defined(__ASSEMBLY__)
-# include <asm/cdef_LPBlackfin.h>
-# if defined(CONFIG_BF523) || defined(CONFIG_BF522)
-#  include "cdefBF522.h"
-# endif
-# if defined(CONFIG_BF525) || defined(CONFIG_BF524)
-#  include "cdefBF525.h"
-# endif
-# if defined(CONFIG_BF527) || defined(CONFIG_BF526)
-#  include "cdefBF527.h"
-# endif
-#endif
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
deleted file mode 100644
index 2c12e879aa4e..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
+++ /dev/null
@@ -1,1095 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _CDEF_BF522_H
-#define _CDEF_BF522_H
-
-/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
-#define bfin_read_PLL_CTL()			bfin_read16(PLL_CTL)
-#define bfin_read_PLL_DIV()			bfin_read16(PLL_DIV)
-#define bfin_write_PLL_DIV(val)			bfin_write16(PLL_DIV, val)
-#define bfin_read_VR_CTL()			bfin_read16(VR_CTL)
-#define bfin_read_PLL_STAT()			bfin_read16(PLL_STAT)
-#define bfin_write_PLL_STAT(val)		bfin_write16(PLL_STAT, val)
-#define bfin_read_PLL_LOCKCNT()			bfin_read16(PLL_LOCKCNT)
-#define bfin_write_PLL_LOCKCNT(val)		bfin_write16(PLL_LOCKCNT, val)
-#define bfin_read_CHIPID()			bfin_read32(CHIPID)
-#define bfin_write_CHIPID(val)			bfin_write32(CHIPID, val)
-
-
-/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
-#define bfin_read_SWRST()			bfin_read16(SWRST)
-#define bfin_write_SWRST(val)			bfin_write16(SWRST, val)
-#define bfin_read_SYSCR()			bfin_read16(SYSCR)
-#define bfin_write_SYSCR(val)			bfin_write16(SYSCR, val)
-
-#define bfin_read_SIC_RVECT()			bfin_read32(SIC_RVECT)
-#define bfin_write_SIC_RVECT(val)		bfin_write32(SIC_RVECT, val)
-#define bfin_read_SIC_IMASK0()			bfin_read32(SIC_IMASK0)
-#define bfin_write_SIC_IMASK0(val)		bfin_write32(SIC_IMASK0, val)
-#define bfin_read_SIC_IMASK(x)			bfin_read32(SIC_IMASK0 + (x << 6))
-#define bfin_write_SIC_IMASK(x, val)		bfin_write32((SIC_IMASK0 + (x << 6)), val)
-
-#define bfin_read_SIC_IAR0()			bfin_read32(SIC_IAR0)
-#define bfin_write_SIC_IAR0(val)		bfin_write32(SIC_IAR0, val)
-#define bfin_read_SIC_IAR1()			bfin_read32(SIC_IAR1)
-#define bfin_write_SIC_IAR1(val)		bfin_write32(SIC_IAR1, val)
-#define bfin_read_SIC_IAR2()			bfin_read32(SIC_IAR2)
-#define bfin_write_SIC_IAR2(val)		bfin_write32(SIC_IAR2, val)
-#define bfin_read_SIC_IAR3()			bfin_read32(SIC_IAR3)
-#define bfin_write_SIC_IAR3(val)		bfin_write32(SIC_IAR3, val)
-
-#define bfin_read_SIC_ISR0()			bfin_read32(SIC_ISR0)
-#define bfin_write_SIC_ISR0(val)		bfin_write32(SIC_ISR0, val)
-#define bfin_read_SIC_ISR(x)			bfin_read32(SIC_ISR0 + (x << 6))
-#define bfin_write_SIC_ISR(x, val)		bfin_write32((SIC_ISR0 + (x << 6)), val)
-
-#define bfin_read_SIC_IWR0()			bfin_read32(SIC_IWR0)
-#define bfin_write_SIC_IWR0(val)		bfin_write32(SIC_IWR0, val)
-#define bfin_read_SIC_IWR(x)			bfin_read32(SIC_IWR0 + (x << 6))
-#define bfin_write_SIC_IWR(x, val)		bfin_write32((SIC_IWR0 + (x << 6)), val)
-
-/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
-
-#define bfin_read_SIC_IMASK1()			bfin_read32(SIC_IMASK1)
-#define bfin_write_SIC_IMASK1(val)		bfin_write32(SIC_IMASK1, val)
-#define bfin_read_SIC_IAR4()			bfin_read32(SIC_IAR4)
-#define bfin_write_SIC_IAR4(val)		bfin_write32(SIC_IAR4, val)
-#define bfin_read_SIC_IAR5()			bfin_read32(SIC_IAR5)
-#define bfin_write_SIC_IAR5(val)		bfin_write32(SIC_IAR5, val)
-#define bfin_read_SIC_IAR6()			bfin_read32(SIC_IAR6)
-#define bfin_write_SIC_IAR6(val)		bfin_write32(SIC_IAR6, val)
-#define bfin_read_SIC_IAR7()			bfin_read32(SIC_IAR7)
-#define bfin_write_SIC_IAR7(val)		bfin_write32(SIC_IAR7, val)
-#define bfin_read_SIC_ISR1()			bfin_read32(SIC_ISR1)
-#define bfin_write_SIC_ISR1(val)		bfin_write32(SIC_ISR1, val)
-#define bfin_read_SIC_IWR1()			bfin_read32(SIC_IWR1)
-#define bfin_write_SIC_IWR1(val)		bfin_write32(SIC_IWR1, val)
-
-/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
-#define bfin_read_WDOG_CTL()			bfin_read16(WDOG_CTL)
-#define bfin_write_WDOG_CTL(val)		bfin_write16(WDOG_CTL, val)
-#define bfin_read_WDOG_CNT()			bfin_read32(WDOG_CNT)
-#define bfin_write_WDOG_CNT(val)		bfin_write32(WDOG_CNT, val)
-#define bfin_read_WDOG_STAT()			bfin_read32(WDOG_STAT)
-#define bfin_write_WDOG_STAT(val)		bfin_write32(WDOG_STAT, val)
-
-
-/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
-#define bfin_read_RTC_STAT()			bfin_read32(RTC_STAT)
-#define bfin_write_RTC_STAT(val)		bfin_write32(RTC_STAT, val)
-#define bfin_read_RTC_ICTL()			bfin_read16(RTC_ICTL)
-#define bfin_write_RTC_ICTL(val)		bfin_write16(RTC_ICTL, val)
-#define bfin_read_RTC_ISTAT()			bfin_read16(RTC_ISTAT)
-#define bfin_write_RTC_ISTAT(val)		bfin_write16(RTC_ISTAT, val)
-#define bfin_read_RTC_SWCNT()			bfin_read16(RTC_SWCNT)
-#define bfin_write_RTC_SWCNT(val)		bfin_write16(RTC_SWCNT, val)
-#define bfin_read_RTC_ALARM()			bfin_read32(RTC_ALARM)
-#define bfin_write_RTC_ALARM(val)		bfin_write32(RTC_ALARM, val)
-#define bfin_read_RTC_FAST()			bfin_read16(RTC_FAST)
-#define bfin_write_RTC_FAST(val)		bfin_write16(RTC_FAST, val)
-#define bfin_read_RTC_PREN()			bfin_read16(RTC_PREN)
-#define bfin_write_RTC_PREN(val)		bfin_write16(RTC_PREN, val)
-
-
-/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
-#define bfin_read_UART0_THR()			bfin_read16(UART0_THR)
-#define bfin_write_UART0_THR(val)		bfin_write16(UART0_THR, val)
-#define bfin_read_UART0_RBR()			bfin_read16(UART0_RBR)
-#define bfin_write_UART0_RBR(val)		bfin_write16(UART0_RBR, val)
-#define bfin_read_UART0_DLL()			bfin_read16(UART0_DLL)
-#define bfin_write_UART0_DLL(val)		bfin_write16(UART0_DLL, val)
-#define bfin_read_UART0_IER()			bfin_read16(UART0_IER)
-#define bfin_write_UART0_IER(val)		bfin_write16(UART0_IER, val)
-#define bfin_read_UART0_DLH()			bfin_read16(UART0_DLH)
-#define bfin_write_UART0_DLH(val)		bfin_write16(UART0_DLH, val)
-#define bfin_read_UART0_IIR()			bfin_read16(UART0_IIR)
-#define bfin_write_UART0_IIR(val)		bfin_write16(UART0_IIR, val)
-#define bfin_read_UART0_LCR()			bfin_read16(UART0_LCR)
-#define bfin_write_UART0_LCR(val)		bfin_write16(UART0_LCR, val)
-#define bfin_read_UART0_MCR()			bfin_read16(UART0_MCR)
-#define bfin_write_UART0_MCR(val)		bfin_write16(UART0_MCR, val)
-#define bfin_read_UART0_LSR()			bfin_read16(UART0_LSR)
-#define bfin_write_UART0_LSR(val)		bfin_write16(UART0_LSR, val)
-#define bfin_read_UART0_MSR()			bfin_read16(UART0_MSR)
-#define bfin_write_UART0_MSR(val)		bfin_write16(UART0_MSR, val)
-#define bfin_read_UART0_SCR()			bfin_read16(UART0_SCR)
-#define bfin_write_UART0_SCR(val)		bfin_write16(UART0_SCR, val)
-#define bfin_read_UART0_GCTL()			bfin_read16(UART0_GCTL)
-#define bfin_write_UART0_GCTL(val)		bfin_write16(UART0_GCTL, val)
-
-
-/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
-#define bfin_read_SPI_CTL()			bfin_read16(SPI_CTL)
-#define bfin_write_SPI_CTL(val)			bfin_write16(SPI_CTL, val)
-#define bfin_read_SPI_FLG()			bfin_read16(SPI_FLG)
-#define bfin_write_SPI_FLG(val)			bfin_write16(SPI_FLG, val)
-#define bfin_read_SPI_STAT()			bfin_read16(SPI_STAT)
-#define bfin_write_SPI_STAT(val)		bfin_write16(SPI_STAT, val)
-#define bfin_read_SPI_TDBR()			bfin_read16(SPI_TDBR)
-#define bfin_write_SPI_TDBR(val)		bfin_write16(SPI_TDBR, val)
-#define bfin_read_SPI_RDBR()			bfin_read16(SPI_RDBR)
-#define bfin_write_SPI_RDBR(val)		bfin_write16(SPI_RDBR, val)
-#define bfin_read_SPI_BAUD()			bfin_read16(SPI_BAUD)
-#define bfin_write_SPI_BAUD(val)		bfin_write16(SPI_BAUD, val)
-#define bfin_read_SPI_SHADOW()			bfin_read16(SPI_SHADOW)
-#define bfin_write_SPI_SHADOW(val)		bfin_write16(SPI_SHADOW, val)
-
-
-/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
-#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
-#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
-#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
-#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
-#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
-#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
-#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
-#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
-
-#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
-#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
-#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
-#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
-#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
-#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
-#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
-#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
-
-#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
-#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
-#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
-#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
-#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
-#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
-#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
-#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
-
-#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
-#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
-#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
-#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
-#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
-#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
-#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
-#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
-
-#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
-#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
-#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
-#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
-#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
-#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
-#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
-#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
-
-#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
-#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
-#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
-#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
-#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
-#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
-#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
-#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
-
-#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
-#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
-#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
-#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
-#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
-#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
-#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
-#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
-
-#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
-#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
-#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
-#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
-#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
-#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
-#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
-#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
-
-#define bfin_read_TIMER_ENABLE()		bfin_read16(TIMER_ENABLE)
-#define bfin_write_TIMER_ENABLE(val)		bfin_write16(TIMER_ENABLE, val)
-#define bfin_read_TIMER_DISABLE()		bfin_read16(TIMER_DISABLE)
-#define bfin_write_TIMER_DISABLE(val)		bfin_write16(TIMER_DISABLE, val)
-#define bfin_read_TIMER_STATUS()		bfin_read32(TIMER_STATUS)
-#define bfin_write_TIMER_STATUS(val)		bfin_write32(TIMER_STATUS, val)
-
-
-/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
-#define bfin_read_PORTFIO()			bfin_read16(PORTFIO)
-#define bfin_write_PORTFIO(val)			bfin_write16(PORTFIO, val)
-#define bfin_read_PORTFIO_CLEAR()		bfin_read16(PORTFIO_CLEAR)
-#define bfin_write_PORTFIO_CLEAR(val)		bfin_write16(PORTFIO_CLEAR, val)
-#define bfin_read_PORTFIO_SET()			bfin_read16(PORTFIO_SET)
-#define bfin_write_PORTFIO_SET(val)		bfin_write16(PORTFIO_SET, val)
-#define bfin_read_PORTFIO_TOGGLE()		bfin_read16(PORTFIO_TOGGLE)
-#define bfin_write_PORTFIO_TOGGLE(val)		bfin_write16(PORTFIO_TOGGLE, val)
-#define bfin_read_PORTFIO_MASKA()		bfin_read16(PORTFIO_MASKA)
-#define bfin_write_PORTFIO_MASKA(val)		bfin_write16(PORTFIO_MASKA, val)
-#define bfin_read_PORTFIO_MASKA_CLEAR()		bfin_read16(PORTFIO_MASKA_CLEAR)
-#define bfin_write_PORTFIO_MASKA_CLEAR(val)	bfin_write16(PORTFIO_MASKA_CLEAR, val)
-#define bfin_read_PORTFIO_MASKA_SET()		bfin_read16(PORTFIO_MASKA_SET)
-#define bfin_write_PORTFIO_MASKA_SET(val)	bfin_write16(PORTFIO_MASKA_SET, val)
-#define bfin_read_PORTFIO_MASKA_TOGGLE()	bfin_read16(PORTFIO_MASKA_TOGGLE)
-#define bfin_write_PORTFIO_MASKA_TOGGLE(val)	bfin_write16(PORTFIO_MASKA_TOGGLE, val)
-#define bfin_read_PORTFIO_MASKB()		bfin_read16(PORTFIO_MASKB)
-#define bfin_write_PORTFIO_MASKB(val)		bfin_write16(PORTFIO_MASKB, val)
-#define bfin_read_PORTFIO_MASKB_CLEAR()		bfin_read16(PORTFIO_MASKB_CLEAR)
-#define bfin_write_PORTFIO_MASKB_CLEAR(val)	bfin_write16(PORTFIO_MASKB_CLEAR, val)
-#define bfin_read_PORTFIO_MASKB_SET()		bfin_read16(PORTFIO_MASKB_SET)
-#define bfin_write_PORTFIO_MASKB_SET(val)	bfin_write16(PORTFIO_MASKB_SET, val)
-#define bfin_read_PORTFIO_MASKB_TOGGLE()	bfin_read16(PORTFIO_MASKB_TOGGLE)
-#define bfin_write_PORTFIO_MASKB_TOGGLE(val)	bfin_write16(PORTFIO_MASKB_TOGGLE, val)
-#define bfin_read_PORTFIO_DIR()			bfin_read16(PORTFIO_DIR)
-#define bfin_write_PORTFIO_DIR(val)		bfin_write16(PORTFIO_DIR, val)
-#define bfin_read_PORTFIO_POLAR()		bfin_read16(PORTFIO_POLAR)
-#define bfin_write_PORTFIO_POLAR(val)		bfin_write16(PORTFIO_POLAR, val)
-#define bfin_read_PORTFIO_EDGE()		bfin_read16(PORTFIO_EDGE)
-#define bfin_write_PORTFIO_EDGE(val)		bfin_write16(PORTFIO_EDGE, val)
-#define bfin_read_PORTFIO_BOTH()		bfin_read16(PORTFIO_BOTH)
-#define bfin_write_PORTFIO_BOTH(val)		bfin_write16(PORTFIO_BOTH, val)
-#define bfin_read_PORTFIO_INEN()		bfin_read16(PORTFIO_INEN)
-#define bfin_write_PORTFIO_INEN(val)		bfin_write16(PORTFIO_INEN, val)
-
-
-/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
-#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
-#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
-#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
-#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
-#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
-#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
-#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
-#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
-#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX)
-#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX)
-#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX, val)
-#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
-#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
-#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
-#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
-#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
-#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
-#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
-#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
-#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
-#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
-#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
-#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
-#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
-#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
-#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
-#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
-#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
-#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
-#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
-#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
-#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
-#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
-#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
-#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
-#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
-#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
-#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
-#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
-#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
-#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
-#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
-#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
-
-
-/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
-#define bfin_read_SPORT1_TCR1()			bfin_read16(SPORT1_TCR1)
-#define bfin_write_SPORT1_TCR1(val)		bfin_write16(SPORT1_TCR1, val)
-#define bfin_read_SPORT1_TCR2()			bfin_read16(SPORT1_TCR2)
-#define bfin_write_SPORT1_TCR2(val)		bfin_write16(SPORT1_TCR2, val)
-#define bfin_read_SPORT1_TCLKDIV()		bfin_read16(SPORT1_TCLKDIV)
-#define bfin_write_SPORT1_TCLKDIV(val)		bfin_write16(SPORT1_TCLKDIV, val)
-#define bfin_read_SPORT1_TFSDIV()		bfin_read16(SPORT1_TFSDIV)
-#define bfin_write_SPORT1_TFSDIV(val)		bfin_write16(SPORT1_TFSDIV, val)
-#define bfin_read_SPORT1_TX()			bfin_read32(SPORT1_TX)
-#define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
-#define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
-#define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
-#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX)
-#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX, val)
-#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX)
-#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX, val)
-#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX)
-#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX, val)
-#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX)
-#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX, val)
-#define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
-#define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
-#define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
-#define bfin_write_SPORT1_RCR2(val)		bfin_write16(SPORT1_RCR2, val)
-#define bfin_read_SPORT1_RCLKDIV()		bfin_read16(SPORT1_RCLKDIV)
-#define bfin_write_SPORT1_RCLKDIV(val)		bfin_write16(SPORT1_RCLKDIV, val)
-#define bfin_read_SPORT1_RFSDIV()		bfin_read16(SPORT1_RFSDIV)
-#define bfin_write_SPORT1_RFSDIV(val)		bfin_write16(SPORT1_RFSDIV, val)
-#define bfin_read_SPORT1_STAT()			bfin_read16(SPORT1_STAT)
-#define bfin_write_SPORT1_STAT(val)		bfin_write16(SPORT1_STAT, val)
-#define bfin_read_SPORT1_CHNL()			bfin_read16(SPORT1_CHNL)
-#define bfin_write_SPORT1_CHNL(val)		bfin_write16(SPORT1_CHNL, val)
-#define bfin_read_SPORT1_MCMC1()		bfin_read16(SPORT1_MCMC1)
-#define bfin_write_SPORT1_MCMC1(val)		bfin_write16(SPORT1_MCMC1, val)
-#define bfin_read_SPORT1_MCMC2()		bfin_read16(SPORT1_MCMC2)
-#define bfin_write_SPORT1_MCMC2(val)		bfin_write16(SPORT1_MCMC2, val)
-#define bfin_read_SPORT1_MTCS0()		bfin_read32(SPORT1_MTCS0)
-#define bfin_write_SPORT1_MTCS0(val)		bfin_write32(SPORT1_MTCS0, val)
-#define bfin_read_SPORT1_MTCS1()		bfin_read32(SPORT1_MTCS1)
-#define bfin_write_SPORT1_MTCS1(val)		bfin_write32(SPORT1_MTCS1, val)
-#define bfin_read_SPORT1_MTCS2()		bfin_read32(SPORT1_MTCS2)
-#define bfin_write_SPORT1_MTCS2(val)		bfin_write32(SPORT1_MTCS2, val)
-#define bfin_read_SPORT1_MTCS3()		bfin_read32(SPORT1_MTCS3)
-#define bfin_write_SPORT1_MTCS3(val)		bfin_write32(SPORT1_MTCS3, val)
-#define bfin_read_SPORT1_MRCS0()		bfin_read32(SPORT1_MRCS0)
-#define bfin_write_SPORT1_MRCS0(val)		bfin_write32(SPORT1_MRCS0, val)
-#define bfin_read_SPORT1_MRCS1()		bfin_read32(SPORT1_MRCS1)
-#define bfin_write_SPORT1_MRCS1(val)		bfin_write32(SPORT1_MRCS1, val)
-#define bfin_read_SPORT1_MRCS2()		bfin_read32(SPORT1_MRCS2)
-#define bfin_write_SPORT1_MRCS2(val)		bfin_write32(SPORT1_MRCS2, val)
-#define bfin_read_SPORT1_MRCS3()		bfin_read32(SPORT1_MRCS3)
-#define bfin_write_SPORT1_MRCS3(val)		bfin_write32(SPORT1_MRCS3, val)
-
-
-/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
-#define bfin_read_EBIU_AMGCTL()			bfin_read16(EBIU_AMGCTL)
-#define bfin_write_EBIU_AMGCTL(val)		bfin_write16(EBIU_AMGCTL, val)
-#define bfin_read_EBIU_AMBCTL0()		bfin_read32(EBIU_AMBCTL0)
-#define bfin_write_EBIU_AMBCTL0(val)		bfin_write32(EBIU_AMBCTL0, val)
-#define bfin_read_EBIU_AMBCTL1()		bfin_read32(EBIU_AMBCTL1)
-#define bfin_write_EBIU_AMBCTL1(val)		bfin_write32(EBIU_AMBCTL1, val)
-#define bfin_read_EBIU_SDGCTL()			bfin_read32(EBIU_SDGCTL)
-#define bfin_write_EBIU_SDGCTL(val)		bfin_write32(EBIU_SDGCTL, val)
-#define bfin_read_EBIU_SDBCTL()			bfin_read16(EBIU_SDBCTL)
-#define bfin_write_EBIU_SDBCTL(val)		bfin_write16(EBIU_SDBCTL, val)
-#define bfin_read_EBIU_SDRRC()			bfin_read16(EBIU_SDRRC)
-#define bfin_write_EBIU_SDRRC(val)		bfin_write16(EBIU_SDRRC, val)
-#define bfin_read_EBIU_SDSTAT()			bfin_read16(EBIU_SDSTAT)
-#define bfin_write_EBIU_SDSTAT(val)		bfin_write16(EBIU_SDSTAT, val)
-
-
-/* DMA Traffic Control Registers													*/
-#define bfin_read_DMAC_TC_PER()			bfin_read16(DMAC_TC_PER)
-#define bfin_write_DMAC_TC_PER(val)		bfin_write16(DMAC_TC_PER, val)
-#define bfin_read_DMAC_TC_CNT()			bfin_read16(DMAC_TC_CNT)
-#define bfin_write_DMAC_TC_CNT(val)		bfin_write16(DMAC_TC_CNT, val)
-
-/* DMA Controller																	*/
-#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
-#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
-#define bfin_read_DMA0_NEXT_DESC_PTR()		bfin_read32(DMA0_NEXT_DESC_PTR)
-#define bfin_write_DMA0_NEXT_DESC_PTR(val)	bfin_write32(DMA0_NEXT_DESC_PTR, val)
-#define bfin_read_DMA0_START_ADDR()		bfin_read32(DMA0_START_ADDR)
-#define bfin_write_DMA0_START_ADDR(val)		bfin_write32(DMA0_START_ADDR, val)
-#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
-#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
-#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
-#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
-#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
-#define bfin_write_DMA0_X_MODIFY(val)		bfin_write16(DMA0_X_MODIFY, val)
-#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
-#define bfin_write_DMA0_Y_MODIFY(val)		bfin_write16(DMA0_Y_MODIFY, val)
-#define bfin_read_DMA0_CURR_DESC_PTR()		bfin_read32(DMA0_CURR_DESC_PTR)
-#define bfin_write_DMA0_CURR_DESC_PTR(val)	bfin_write32(DMA0_CURR_DESC_PTR, val)
-#define bfin_read_DMA0_CURR_ADDR()		bfin_read32(DMA0_CURR_ADDR)
-#define bfin_write_DMA0_CURR_ADDR(val)		bfin_write32(DMA0_CURR_ADDR, val)
-#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
-#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
-#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
-#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
-#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
-#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
-#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
-#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
-#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
-#define bfin_read_DMA1_NEXT_DESC_PTR()		bfin_read32(DMA1_NEXT_DESC_PTR)
-#define bfin_write_DMA1_NEXT_DESC_PTR(val)	bfin_write32(DMA1_NEXT_DESC_PTR, val)
-#define bfin_read_DMA1_START_ADDR()		bfin_read32(DMA1_START_ADDR)
-#define bfin_write_DMA1_START_ADDR(val)		bfin_write32(DMA1_START_ADDR, val)
-#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
-#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
-#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
-#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
-#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
-#define bfin_write_DMA1_X_MODIFY(val)		bfin_write16(DMA1_X_MODIFY, val)
-#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
-#define bfin_write_DMA1_Y_MODIFY(val)		bfin_write16(DMA1_Y_MODIFY, val)
-#define bfin_read_DMA1_CURR_DESC_PTR()		bfin_read32(DMA1_CURR_DESC_PTR)
-#define bfin_write_DMA1_CURR_DESC_PTR(val)	bfin_write32(DMA1_CURR_DESC_PTR, val)
-#define bfin_read_DMA1_CURR_ADDR()		bfin_read32(DMA1_CURR_ADDR)
-#define bfin_write_DMA1_CURR_ADDR(val)		bfin_write32(DMA1_CURR_ADDR, val)
-#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
-#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
-#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
-#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
-#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
-#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
-#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
-#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
-#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
-#define bfin_read_DMA2_NEXT_DESC_PTR()		bfin_read32(DMA2_NEXT_DESC_PTR)
-#define bfin_write_DMA2_NEXT_DESC_PTR(val)	bfin_write32(DMA2_NEXT_DESC_PTR, val)
-#define bfin_read_DMA2_START_ADDR()		bfin_read32(DMA2_START_ADDR)
-#define bfin_write_DMA2_START_ADDR(val)		bfin_write32(DMA2_START_ADDR, val)
-#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
-#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
-#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
-#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
-#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
-#define bfin_write_DMA2_X_MODIFY(val)		bfin_write16(DMA2_X_MODIFY, val)
-#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
-#define bfin_write_DMA2_Y_MODIFY(val)		bfin_write16(DMA2_Y_MODIFY, val)
-#define bfin_read_DMA2_CURR_DESC_PTR()		bfin_read32(DMA2_CURR_DESC_PTR)
-#define bfin_write_DMA2_CURR_DESC_PTR(val)	bfin_write32(DMA2_CURR_DESC_PTR, val)
-#define bfin_read_DMA2_CURR_ADDR()		bfin_read32(DMA2_CURR_ADDR)
-#define bfin_write_DMA2_CURR_ADDR(val)		bfin_write32(DMA2_CURR_ADDR, val)
-#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
-#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
-#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
-#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
-#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
-#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
-#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
-#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
-#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
-#define bfin_read_DMA3_NEXT_DESC_PTR()		bfin_read32(DMA3_NEXT_DESC_PTR)
-#define bfin_write_DMA3_NEXT_DESC_PTR(val)	bfin_write32(DMA3_NEXT_DESC_PTR, val)
-#define bfin_read_DMA3_START_ADDR()		bfin_read32(DMA3_START_ADDR)
-#define bfin_write_DMA3_START_ADDR(val)		bfin_write32(DMA3_START_ADDR, val)
-#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
-#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
-#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
-#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
-#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
-#define bfin_write_DMA3_X_MODIFY(val)		bfin_write16(DMA3_X_MODIFY, val)
-#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
-#define bfin_write_DMA3_Y_MODIFY(val)		bfin_write16(DMA3_Y_MODIFY, val)
-#define bfin_read_DMA3_CURR_DESC_PTR()		bfin_read32(DMA3_CURR_DESC_PTR)
-#define bfin_write_DMA3_CURR_DESC_PTR(val)	bfin_write32(DMA3_CURR_DESC_PTR, val)
-#define bfin_read_DMA3_CURR_ADDR()		bfin_read32(DMA3_CURR_ADDR)
-#define bfin_write_DMA3_CURR_ADDR(val)		bfin_write32(DMA3_CURR_ADDR, val)
-#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
-#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
-#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
-#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
-#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
-#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
-#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
-#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
-#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
-#define bfin_read_DMA4_NEXT_DESC_PTR()		bfin_read32(DMA4_NEXT_DESC_PTR)
-#define bfin_write_DMA4_NEXT_DESC_PTR(val)	bfin_write32(DMA4_NEXT_DESC_PTR, val)
-#define bfin_read_DMA4_START_ADDR()		bfin_read32(DMA4_START_ADDR)
-#define bfin_write_DMA4_START_ADDR(val)		bfin_write32(DMA4_START_ADDR, val)
-#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
-#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
-#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
-#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
-#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
-#define bfin_write_DMA4_X_MODIFY(val)		bfin_write16(DMA4_X_MODIFY, val)
-#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
-#define bfin_write_DMA4_Y_MODIFY(val)		bfin_write16(DMA4_Y_MODIFY, val)
-#define bfin_read_DMA4_CURR_DESC_PTR()		bfin_read32(DMA4_CURR_DESC_PTR)
-#define bfin_write_DMA4_CURR_DESC_PTR(val)	bfin_write32(DMA4_CURR_DESC_PTR, val)
-#define bfin_read_DMA4_CURR_ADDR()		bfin_read32(DMA4_CURR_ADDR)
-#define bfin_write_DMA4_CURR_ADDR(val)		bfin_write32(DMA4_CURR_ADDR, val)
-#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
-#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
-#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
-#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
-#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
-#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
-#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
-#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
-#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
-#define bfin_read_DMA5_NEXT_DESC_PTR()		bfin_read32(DMA5_NEXT_DESC_PTR)
-#define bfin_write_DMA5_NEXT_DESC_PTR(val)	bfin_write32(DMA5_NEXT_DESC_PTR, val)
-#define bfin_read_DMA5_START_ADDR()		bfin_read32(DMA5_START_ADDR)
-#define bfin_write_DMA5_START_ADDR(val)		bfin_write32(DMA5_START_ADDR, val)
-#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
-#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
-#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
-#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
-#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
-#define bfin_write_DMA5_X_MODIFY(val)		bfin_write16(DMA5_X_MODIFY, val)
-#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
-#define bfin_write_DMA5_Y_MODIFY(val)		bfin_write16(DMA5_Y_MODIFY, val)
-#define bfin_read_DMA5_CURR_DESC_PTR()		bfin_read32(DMA5_CURR_DESC_PTR)
-#define bfin_write_DMA5_CURR_DESC_PTR(val)	bfin_write32(DMA5_CURR_DESC_PTR, val)
-#define bfin_read_DMA5_CURR_ADDR()		bfin_read32(DMA5_CURR_ADDR)
-#define bfin_write_DMA5_CURR_ADDR(val)		bfin_write32(DMA5_CURR_ADDR, val)
-#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
-#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
-#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
-#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
-#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
-#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
-#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
-#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
-#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
-#define bfin_read_DMA6_NEXT_DESC_PTR()		bfin_read32(DMA6_NEXT_DESC_PTR)
-#define bfin_write_DMA6_NEXT_DESC_PTR(val)	bfin_write32(DMA6_NEXT_DESC_PTR, val)
-#define bfin_read_DMA6_START_ADDR()		bfin_read32(DMA6_START_ADDR)
-#define bfin_write_DMA6_START_ADDR(val)		bfin_write32(DMA6_START_ADDR, val)
-#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
-#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
-#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
-#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
-#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
-#define bfin_write_DMA6_X_MODIFY(val)		bfin_write16(DMA6_X_MODIFY, val)
-#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
-#define bfin_write_DMA6_Y_MODIFY(val)		bfin_write16(DMA6_Y_MODIFY, val)
-#define bfin_read_DMA6_CURR_DESC_PTR()		bfin_read32(DMA6_CURR_DESC_PTR)
-#define bfin_write_DMA6_CURR_DESC_PTR(val)	bfin_write32(DMA6_CURR_DESC_PTR, val)
-#define bfin_read_DMA6_CURR_ADDR()		bfin_read32(DMA6_CURR_ADDR)
-#define bfin_write_DMA6_CURR_ADDR(val)		bfin_write32(DMA6_CURR_ADDR, val)
-#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
-#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
-#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
-#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
-#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
-#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
-#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
-#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
-#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
-#define bfin_read_DMA7_NEXT_DESC_PTR()		bfin_read32(DMA7_NEXT_DESC_PTR)
-#define bfin_write_DMA7_NEXT_DESC_PTR(val)	bfin_write32(DMA7_NEXT_DESC_PTR, val)
-#define bfin_read_DMA7_START_ADDR()		bfin_read32(DMA7_START_ADDR)
-#define bfin_write_DMA7_START_ADDR(val)		bfin_write32(DMA7_START_ADDR, val)
-#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
-#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
-#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
-#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
-#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
-#define bfin_write_DMA7_X_MODIFY(val)		bfin_write16(DMA7_X_MODIFY, val)
-#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
-#define bfin_write_DMA7_Y_MODIFY(val)		bfin_write16(DMA7_Y_MODIFY, val)
-#define bfin_read_DMA7_CURR_DESC_PTR()		bfin_read32(DMA7_CURR_DESC_PTR)
-#define bfin_write_DMA7_CURR_DESC_PTR(val)	bfin_write32(DMA7_CURR_DESC_PTR, val)
-#define bfin_read_DMA7_CURR_ADDR()		bfin_read32(DMA7_CURR_ADDR)
-#define bfin_write_DMA7_CURR_ADDR(val)		bfin_write32(DMA7_CURR_ADDR, val)
-#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
-#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
-#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
-#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
-#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
-#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
-#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
-#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
-#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
-#define bfin_read_DMA8_NEXT_DESC_PTR()		bfin_read32(DMA8_NEXT_DESC_PTR)
-#define bfin_write_DMA8_NEXT_DESC_PTR(val)	bfin_write32(DMA8_NEXT_DESC_PTR, val)
-#define bfin_read_DMA8_START_ADDR()		bfin_read32(DMA8_START_ADDR)
-#define bfin_write_DMA8_START_ADDR(val)		bfin_write32(DMA8_START_ADDR, val)
-#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
-#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
-#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
-#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
-#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
-#define bfin_write_DMA8_X_MODIFY(val)		bfin_write16(DMA8_X_MODIFY, val)
-#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
-#define bfin_write_DMA8_Y_MODIFY(val)		bfin_write16(DMA8_Y_MODIFY, val)
-#define bfin_read_DMA8_CURR_DESC_PTR()		bfin_read32(DMA8_CURR_DESC_PTR)
-#define bfin_write_DMA8_CURR_DESC_PTR(val)	bfin_write32(DMA8_CURR_DESC_PTR, val)
-#define bfin_read_DMA8_CURR_ADDR()		bfin_read32(DMA8_CURR_ADDR)
-#define bfin_write_DMA8_CURR_ADDR(val)		bfin_write32(DMA8_CURR_ADDR, val)
-#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
-#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
-#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
-#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
-#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
-#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
-#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
-#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
-#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
-#define bfin_read_DMA9_NEXT_DESC_PTR()		bfin_read32(DMA9_NEXT_DESC_PTR)
-#define bfin_write_DMA9_NEXT_DESC_PTR(val)	bfin_write32(DMA9_NEXT_DESC_PTR, val)
-#define bfin_read_DMA9_START_ADDR()		bfin_read32(DMA9_START_ADDR)
-#define bfin_write_DMA9_START_ADDR(val)		bfin_write32(DMA9_START_ADDR, val)
-#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
-#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
-#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
-#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
-#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
-#define bfin_write_DMA9_X_MODIFY(val)		bfin_write16(DMA9_X_MODIFY, val)
-#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
-#define bfin_write_DMA9_Y_MODIFY(val)		bfin_write16(DMA9_Y_MODIFY, val)
-#define bfin_read_DMA9_CURR_DESC_PTR()		bfin_read32(DMA9_CURR_DESC_PTR)
-#define bfin_write_DMA9_CURR_DESC_PTR(val)	bfin_write32(DMA9_CURR_DESC_PTR, val)
-#define bfin_read_DMA9_CURR_ADDR()		bfin_read32(DMA9_CURR_ADDR)
-#define bfin_write_DMA9_CURR_ADDR(val)		bfin_write32(DMA9_CURR_ADDR, val)
-#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
-#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
-#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
-#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
-#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
-#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
-#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
-#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
-#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
-#define bfin_read_DMA10_NEXT_DESC_PTR()		bfin_read32(DMA10_NEXT_DESC_PTR)
-#define bfin_write_DMA10_NEXT_DESC_PTR(val)	bfin_write32(DMA10_NEXT_DESC_PTR, val)
-#define bfin_read_DMA10_START_ADDR()		bfin_read32(DMA10_START_ADDR)
-#define bfin_write_DMA10_START_ADDR(val)	bfin_write32(DMA10_START_ADDR, val)
-#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
-#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
-#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
-#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
-#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
-#define bfin_write_DMA10_X_MODIFY(val)		bfin_write16(DMA10_X_MODIFY, val)
-#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
-#define bfin_write_DMA10_Y_MODIFY(val)		bfin_write16(DMA10_Y_MODIFY, val)
-#define bfin_read_DMA10_CURR_DESC_PTR()		bfin_read32(DMA10_CURR_DESC_PTR)
-#define bfin_write_DMA10_CURR_DESC_PTR(val)	bfin_write32(DMA10_CURR_DESC_PTR, val)
-#define bfin_read_DMA10_CURR_ADDR()		bfin_read32(DMA10_CURR_ADDR)
-#define bfin_write_DMA10_CURR_ADDR(val)		bfin_write32(DMA10_CURR_ADDR, val)
-#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
-#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
-#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
-#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
-#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
-#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
-#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
-#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
-
-#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
-#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
-#define bfin_read_DMA11_NEXT_DESC_PTR()		bfin_read32(DMA11_NEXT_DESC_PTR)
-#define bfin_write_DMA11_NEXT_DESC_PTR(val)	bfin_write32(DMA11_NEXT_DESC_PTR, val)
-#define bfin_read_DMA11_START_ADDR()		bfin_read32(DMA11_START_ADDR)
-#define bfin_write_DMA11_START_ADDR(val)	bfin_write32(DMA11_START_ADDR, val)
-#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
-#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
-#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
-#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
-#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
-#define bfin_write_DMA11_X_MODIFY(val)		bfin_write16(DMA11_X_MODIFY, val)
-#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
-#define bfin_write_DMA11_Y_MODIFY(val)		bfin_write16(DMA11_Y_MODIFY, val)
-#define bfin_read_DMA11_CURR_DESC_PTR()		bfin_read32(DMA11_CURR_DESC_PTR)
-#define bfin_write_DMA11_CURR_DESC_PTR(val)	bfin_write32(DMA11_CURR_DESC_PTR, val)
-#define bfin_read_DMA11_CURR_ADDR()		bfin_read32(DMA11_CURR_ADDR)
-#define bfin_write_DMA11_CURR_ADDR(val)		bfin_write32(DMA11_CURR_ADDR, val)
-#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
-#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
-#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
-#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
-#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
-#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
-#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
-#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
-
-#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
-#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
-#define bfin_read_MDMA_D0_NEXT_DESC_PTR()	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
-#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
-#define bfin_read_MDMA_D0_START_ADDR()		bfin_read32(MDMA_D0_START_ADDR)
-#define bfin_write_MDMA_D0_START_ADDR(val)	bfin_write32(MDMA_D0_START_ADDR, val)
-#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
-#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
-#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
-#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
-#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
-#define bfin_write_MDMA_D0_X_MODIFY(val)	bfin_write16(MDMA_D0_X_MODIFY, val)
-#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
-#define bfin_write_MDMA_D0_Y_MODIFY(val)	bfin_write16(MDMA_D0_Y_MODIFY, val)
-#define bfin_read_MDMA_D0_CURR_DESC_PTR()	bfin_read32(MDMA_D0_CURR_DESC_PTR)
-#define bfin_write_MDMA_D0_CURR_DESC_PTR(val)	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
-#define bfin_read_MDMA_D0_CURR_ADDR()		bfin_read32(MDMA_D0_CURR_ADDR)
-#define bfin_write_MDMA_D0_CURR_ADDR(val)	bfin_write32(MDMA_D0_CURR_ADDR, val)
-#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
-#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
-#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
-#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
-#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
-#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
-#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
-#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
-
-#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
-#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
-#define bfin_read_MDMA_S0_NEXT_DESC_PTR()	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
-#define bfin_read_MDMA_S0_START_ADDR()		bfin_read32(MDMA_S0_START_ADDR)
-#define bfin_write_MDMA_S0_START_ADDR(val)	bfin_write32(MDMA_S0_START_ADDR, val)
-#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
-#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
-#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
-#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
-#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
-#define bfin_write_MDMA_S0_X_MODIFY(val)	bfin_write16(MDMA_S0_X_MODIFY, val)
-#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
-#define bfin_write_MDMA_S0_Y_MODIFY(val)	bfin_write16(MDMA_S0_Y_MODIFY, val)
-#define bfin_read_MDMA_S0_CURR_DESC_PTR()	bfin_read32(MDMA_S0_CURR_DESC_PTR)
-#define bfin_write_MDMA_S0_CURR_DESC_PTR(val)	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
-#define bfin_read_MDMA_S0_CURR_ADDR()		bfin_read32(MDMA_S0_CURR_ADDR)
-#define bfin_write_MDMA_S0_CURR_ADDR(val)	bfin_write32(MDMA_S0_CURR_ADDR, val)
-#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
-#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
-#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
-#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
-#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
-#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
-#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
-#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
-
-#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
-#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
-#define bfin_read_MDMA_D1_NEXT_DESC_PTR()	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
-#define bfin_read_MDMA_D1_START_ADDR()		bfin_read32(MDMA_D1_START_ADDR)
-#define bfin_write_MDMA_D1_START_ADDR(val)	bfin_write32(MDMA_D1_START_ADDR, val)
-#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
-#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
-#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
-#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
-#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
-#define bfin_write_MDMA_D1_X_MODIFY(val)	bfin_write16(MDMA_D1_X_MODIFY, val)
-#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
-#define bfin_write_MDMA_D1_Y_MODIFY(val)	bfin_write16(MDMA_D1_Y_MODIFY, val)
-#define bfin_read_MDMA_D1_CURR_DESC_PTR()	bfin_read32(MDMA_D1_CURR_DESC_PTR)
-#define bfin_write_MDMA_D1_CURR_DESC_PTR(val)	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
-#define bfin_read_MDMA_D1_CURR_ADDR()		bfin_read32(MDMA_D1_CURR_ADDR)
-#define bfin_write_MDMA_D1_CURR_ADDR(val)	bfin_write32(MDMA_D1_CURR_ADDR, val)
-#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
-#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
-#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
-#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
-#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
-#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
-#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
-#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
-
-#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
-#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
-#define bfin_read_MDMA_S1_NEXT_DESC_PTR()	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
-#define bfin_read_MDMA_S1_START_ADDR()		bfin_read32(MDMA_S1_START_ADDR)
-#define bfin_write_MDMA_S1_START_ADDR(val)	bfin_write32(MDMA_S1_START_ADDR, val)
-#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
-#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
-#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
-#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
-#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
-#define bfin_write_MDMA_S1_X_MODIFY(val)	bfin_write16(MDMA_S1_X_MODIFY, val)
-#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
-#define bfin_write_MDMA_S1_Y_MODIFY(val)	bfin_write16(MDMA_S1_Y_MODIFY, val)
-#define bfin_read_MDMA_S1_CURR_DESC_PTR()	bfin_read32(MDMA_S1_CURR_DESC_PTR)
-#define bfin_write_MDMA_S1_CURR_DESC_PTR(val)	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
-#define bfin_read_MDMA_S1_CURR_ADDR()		bfin_read32(MDMA_S1_CURR_ADDR)
-#define bfin_write_MDMA_S1_CURR_ADDR(val)	bfin_write32(MDMA_S1_CURR_ADDR, val)
-#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
-#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
-#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
-#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
-#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
-#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
-#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
-#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
-
-
-/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
-#define bfin_read_PPI_CONTROL()			bfin_read16(PPI_CONTROL)
-#define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
-#define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
-#define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
-#define bfin_clear_PPI_STATUS()			bfin_write_PPI_STATUS(0xFFFF)
-#define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
-#define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
-#define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
-#define bfin_write_PPI_COUNT(val)		bfin_write16(PPI_COUNT, val)
-#define bfin_read_PPI_FRAME()			bfin_read16(PPI_FRAME)
-#define bfin_write_PPI_FRAME(val)		bfin_write16(PPI_FRAME, val)
-
-
-/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
-
-/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
-#define bfin_read_PORTGIO()			bfin_read16(PORTGIO)
-#define bfin_write_PORTGIO(val)			bfin_write16(PORTGIO, val)
-#define bfin_read_PORTGIO_CLEAR()		bfin_read16(PORTGIO_CLEAR)
-#define bfin_write_PORTGIO_CLEAR(val)		bfin_write16(PORTGIO_CLEAR, val)
-#define bfin_read_PORTGIO_SET()			bfin_read16(PORTGIO_SET)
-#define bfin_write_PORTGIO_SET(val)		bfin_write16(PORTGIO_SET, val)
-#define bfin_read_PORTGIO_TOGGLE()		bfin_read16(PORTGIO_TOGGLE)
-#define bfin_write_PORTGIO_TOGGLE(val)		bfin_write16(PORTGIO_TOGGLE, val)
-#define bfin_read_PORTGIO_MASKA()		bfin_read16(PORTGIO_MASKA)
-#define bfin_write_PORTGIO_MASKA(val)		bfin_write16(PORTGIO_MASKA, val)
-#define bfin_read_PORTGIO_MASKA_CLEAR()		bfin_read16(PORTGIO_MASKA_CLEAR)
-#define bfin_write_PORTGIO_MASKA_CLEAR(val)	bfin_write16(PORTGIO_MASKA_CLEAR, val)
-#define bfin_read_PORTGIO_MASKA_SET()		bfin_read16(PORTGIO_MASKA_SET)
-#define bfin_write_PORTGIO_MASKA_SET(val)	bfin_write16(PORTGIO_MASKA_SET, val)
-#define bfin_read_PORTGIO_MASKA_TOGGLE()	bfin_read16(PORTGIO_MASKA_TOGGLE)
-#define bfin_write_PORTGIO_MASKA_TOGGLE(val)	bfin_write16(PORTGIO_MASKA_TOGGLE, val)
-#define bfin_read_PORTGIO_MASKB()		bfin_read16(PORTGIO_MASKB)
-#define bfin_write_PORTGIO_MASKB(val)		bfin_write16(PORTGIO_MASKB, val)
-#define bfin_read_PORTGIO_MASKB_CLEAR()		bfin_read16(PORTGIO_MASKB_CLEAR)
-#define bfin_write_PORTGIO_MASKB_CLEAR(val)	bfin_write16(PORTGIO_MASKB_CLEAR, val)
-#define bfin_read_PORTGIO_MASKB_SET()		bfin_read16(PORTGIO_MASKB_SET)
-#define bfin_write_PORTGIO_MASKB_SET(val)	bfin_write16(PORTGIO_MASKB_SET, val)
-#define bfin_read_PORTGIO_MASKB_TOGGLE()	bfin_read16(PORTGIO_MASKB_TOGGLE)
-#define bfin_write_PORTGIO_MASKB_TOGGLE(val)	bfin_write16(PORTGIO_MASKB_TOGGLE, val)
-#define bfin_read_PORTGIO_DIR()			bfin_read16(PORTGIO_DIR)
-#define bfin_write_PORTGIO_DIR(val)		bfin_write16(PORTGIO_DIR, val)
-#define bfin_read_PORTGIO_POLAR()		bfin_read16(PORTGIO_POLAR)
-#define bfin_write_PORTGIO_POLAR(val)		bfin_write16(PORTGIO_POLAR, val)
-#define bfin_read_PORTGIO_EDGE()		bfin_read16(PORTGIO_EDGE)
-#define bfin_write_PORTGIO_EDGE(val)		bfin_write16(PORTGIO_EDGE, val)
-#define bfin_read_PORTGIO_BOTH()		bfin_read16(PORTGIO_BOTH)
-#define bfin_write_PORTGIO_BOTH(val)		bfin_write16(PORTGIO_BOTH, val)
-#define bfin_read_PORTGIO_INEN()		bfin_read16(PORTGIO_INEN)
-#define bfin_write_PORTGIO_INEN(val)		bfin_write16(PORTGIO_INEN, val)
-
-
-/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
-#define bfin_read_PORTHIO()			bfin_read16(PORTHIO)
-#define bfin_write_PORTHIO(val)			bfin_write16(PORTHIO, val)
-#define bfin_read_PORTHIO_CLEAR()		bfin_read16(PORTHIO_CLEAR)
-#define bfin_write_PORTHIO_CLEAR(val)		bfin_write16(PORTHIO_CLEAR, val)
-#define bfin_read_PORTHIO_SET()			bfin_read16(PORTHIO_SET)
-#define bfin_write_PORTHIO_SET(val)		bfin_write16(PORTHIO_SET, val)
-#define bfin_read_PORTHIO_TOGGLE()		bfin_read16(PORTHIO_TOGGLE)
-#define bfin_write_PORTHIO_TOGGLE(val)		bfin_write16(PORTHIO_TOGGLE, val)
-#define bfin_read_PORTHIO_MASKA()		bfin_read16(PORTHIO_MASKA)
-#define bfin_write_PORTHIO_MASKA(val)		bfin_write16(PORTHIO_MASKA, val)
-#define bfin_read_PORTHIO_MASKA_CLEAR()		bfin_read16(PORTHIO_MASKA_CLEAR)
-#define bfin_write_PORTHIO_MASKA_CLEAR(val)	bfin_write16(PORTHIO_MASKA_CLEAR, val)
-#define bfin_read_PORTHIO_MASKA_SET()		bfin_read16(PORTHIO_MASKA_SET)
-#define bfin_write_PORTHIO_MASKA_SET(val)	bfin_write16(PORTHIO_MASKA_SET, val)
-#define bfin_read_PORTHIO_MASKA_TOGGLE()	bfin_read16(PORTHIO_MASKA_TOGGLE)
-#define bfin_write_PORTHIO_MASKA_TOGGLE(val)	bfin_write16(PORTHIO_MASKA_TOGGLE, val)
-#define bfin_read_PORTHIO_MASKB()		bfin_read16(PORTHIO_MASKB)
-#define bfin_write_PORTHIO_MASKB(val)		bfin_write16(PORTHIO_MASKB, val)
-#define bfin_read_PORTHIO_MASKB_CLEAR()		bfin_read16(PORTHIO_MASKB_CLEAR)
-#define bfin_write_PORTHIO_MASKB_CLEAR(val)	bfin_write16(PORTHIO_MASKB_CLEAR, val)
-#define bfin_read_PORTHIO_MASKB_SET()		bfin_read16(PORTHIO_MASKB_SET)
-#define bfin_write_PORTHIO_MASKB_SET(val)	bfin_write16(PORTHIO_MASKB_SET, val)
-#define bfin_read_PORTHIO_MASKB_TOGGLE()	bfin_read16(PORTHIO_MASKB_TOGGLE)
-#define bfin_write_PORTHIO_MASKB_TOGGLE(val)	bfin_write16(PORTHIO_MASKB_TOGGLE, val)
-#define bfin_read_PORTHIO_DIR()			bfin_read16(PORTHIO_DIR)
-#define bfin_write_PORTHIO_DIR(val)		bfin_write16(PORTHIO_DIR, val)
-#define bfin_read_PORTHIO_POLAR()		bfin_read16(PORTHIO_POLAR)
-#define bfin_write_PORTHIO_POLAR(val)		bfin_write16(PORTHIO_POLAR, val)
-#define bfin_read_PORTHIO_EDGE()		bfin_read16(PORTHIO_EDGE)
-#define bfin_write_PORTHIO_EDGE(val)		bfin_write16(PORTHIO_EDGE, val)
-#define bfin_read_PORTHIO_BOTH()		bfin_read16(PORTHIO_BOTH)
-#define bfin_write_PORTHIO_BOTH(val)		bfin_write16(PORTHIO_BOTH, val)
-#define bfin_read_PORTHIO_INEN()		bfin_read16(PORTHIO_INEN)
-#define bfin_write_PORTHIO_INEN(val)		bfin_write16(PORTHIO_INEN, val)
-
-
-/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
-#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
-#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
-#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
-#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
-#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
-#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
-#define bfin_read_UART1_IER()			bfin_read16(UART1_IER)
-#define bfin_write_UART1_IER(val)		bfin_write16(UART1_IER, val)
-#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
-#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
-#define bfin_read_UART1_IIR()			bfin_read16(UART1_IIR)
-#define bfin_write_UART1_IIR(val)		bfin_write16(UART1_IIR, val)
-#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
-#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
-#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
-#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
-#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
-#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
-#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
-#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
-#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
-#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
-#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
-#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
-
-/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */
-
-/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
-#define bfin_read_PORTF_FER()			bfin_read16(PORTF_FER)
-#define bfin_write_PORTF_FER(val)		bfin_write16(PORTF_FER, val)
-#define bfin_read_PORTG_FER()			bfin_read16(PORTG_FER)
-#define bfin_write_PORTG_FER(val)		bfin_write16(PORTG_FER, val)
-#define bfin_read_PORTH_FER()			bfin_read16(PORTH_FER)
-#define bfin_write_PORTH_FER(val)		bfin_write16(PORTH_FER, val)
-#define bfin_read_PORT_MUX()			bfin_read16(PORT_MUX)
-#define bfin_write_PORT_MUX(val)		bfin_write16(PORT_MUX, val)
-
-
-/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
-#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
-#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
-#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
-#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
-#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
-#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
-#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
-#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
-#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
-#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
-#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
-#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
-#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
-#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
-
-#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
-#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
-#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
-#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
-#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
-#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
-#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
-#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
-#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
-#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
-#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
-#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
-#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
-#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
-
-/* ==== end from cdefBF534.h ==== */
-
-/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
-
-#define bfin_read_PORTF_MUX()			bfin_read16(PORTF_MUX)
-#define bfin_write_PORTF_MUX(val)		bfin_write16(PORTF_MUX, val)
-#define bfin_read_PORTG_MUX()			bfin_read16(PORTG_MUX)
-#define bfin_write_PORTG_MUX(val)		bfin_write16(PORTG_MUX, val)
-#define bfin_read_PORTH_MUX()			bfin_read16(PORTH_MUX)
-#define bfin_write_PORTH_MUX(val)		bfin_write16(PORTH_MUX, val)
-
-#define bfin_read_PORTF_DRIVE()			bfin_read16(PORTF_DRIVE)
-#define bfin_write_PORTF_DRIVE(val)		bfin_write16(PORTF_DRIVE, val)
-#define bfin_read_PORTG_DRIVE()			bfin_read16(PORTG_DRIVE)
-#define bfin_write_PORTG_DRIVE(val)		bfin_write16(PORTG_DRIVE, val)
-#define bfin_read_PORTH_DRIVE()			bfin_read16(PORTH_DRIVE)
-#define bfin_write_PORTH_DRIVE(val)		bfin_write16(PORTH_DRIVE, val)
-#define bfin_read_PORTF_SLEW()			bfin_read16(PORTF_SLEW)
-#define bfin_write_PORTF_SLEW(val)		bfin_write16(PORTF_SLEW, val)
-#define bfin_read_PORTG_SLEW()			bfin_read16(PORTG_SLEW)
-#define bfin_write_PORTG_SLEW(val)		bfin_write16(PORTG_SLEW, val)
-#define bfin_read_PORTH_SLEW()			bfin_read16(PORTH_SLEW)
-#define bfin_write_PORTH_SLEW(val)		bfin_write16(PORTH_SLEW, val)
-#define bfin_read_PORTF_HYSTERESIS()		bfin_read16(PORTF_HYSTERESIS)
-#define bfin_write_PORTF_HYSTERESIS(val)	bfin_write16(PORTF_HYSTERESIS, val)
-#define bfin_read_PORTG_HYSTERESIS()		bfin_read16(PORTG_HYSTERESIS)
-#define bfin_write_PORTG_HYSTERESIS(val)	bfin_write16(PORTG_HYSTERESIS, val)
-#define bfin_read_PORTH_HYSTERESIS()		bfin_read16(PORTH_HYSTERESIS)
-#define bfin_write_PORTH_HYSTERESIS(val)	bfin_write16(PORTH_HYSTERESIS, val)
-#define bfin_read_MISCPORT_DRIVE()		bfin_read16(MISCPORT_DRIVE)
-#define bfin_write_MISCPORT_DRIVE(val)		bfin_write16(MISCPORT_DRIVE, val)
-#define bfin_read_MISCPORT_SLEW()		bfin_read16(MISCPORT_SLEW)
-#define bfin_write_MISCPORT_SLEW(val)		bfin_write16(MISCPORT_SLEW, val)
-#define bfin_read_MISCPORT_HYSTERESIS()		bfin_read16(MISCPORT_HYSTERESIS)
-#define bfin_write_MISCPORT_HYSTERESIS(val)	bfin_write16(MISCPORT_HYSTERESIS, val)
-
-/* HOST Port Registers */
-
-#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
-#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
-#define bfin_read_HOST_STATUS()			bfin_read16(HOST_STATUS)
-#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
-#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
-#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
-
-/* Counter Registers */
-
-#define bfin_read_CNT_CONFIG()			bfin_read16(CNT_CONFIG)
-#define bfin_write_CNT_CONFIG(val)		bfin_write16(CNT_CONFIG, val)
-#define bfin_read_CNT_IMASK()			bfin_read16(CNT_IMASK)
-#define bfin_write_CNT_IMASK(val)		bfin_write16(CNT_IMASK, val)
-#define bfin_read_CNT_STATUS()			bfin_read16(CNT_STATUS)
-#define bfin_write_CNT_STATUS(val)		bfin_write16(CNT_STATUS, val)
-#define bfin_read_CNT_COMMAND()			bfin_read16(CNT_COMMAND)
-#define bfin_write_CNT_COMMAND(val)		bfin_write16(CNT_COMMAND, val)
-#define bfin_read_CNT_DEBOUNCE()		bfin_read16(CNT_DEBOUNCE)
-#define bfin_write_CNT_DEBOUNCE(val)		bfin_write16(CNT_DEBOUNCE, val)
-#define bfin_read_CNT_COUNTER()			bfin_read32(CNT_COUNTER)
-#define bfin_write_CNT_COUNTER(val)		bfin_write32(CNT_COUNTER, val)
-#define bfin_read_CNT_MAX()			bfin_read32(CNT_MAX)
-#define bfin_write_CNT_MAX(val)			bfin_write32(CNT_MAX, val)
-#define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
-#define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
-
-/* Security Registers */
-
-#define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
-#define bfin_write_SECURE_SYSSWT(val)		bfin_write32(SECURE_SYSSWT, val)
-#define bfin_read_SECURE_CONTROL()		bfin_read16(SECURE_CONTROL)
-#define bfin_write_SECURE_CONTROL(val)		bfin_write16(SECURE_CONTROL, val)
-#define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
-#define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
-
-/* NFC Registers */
-
-#define bfin_read_NFC_CTL()			bfin_read16(NFC_CTL)
-#define bfin_write_NFC_CTL(val)			bfin_write16(NFC_CTL, val)
-#define bfin_read_NFC_STAT()			bfin_read16(NFC_STAT)
-#define bfin_write_NFC_STAT(val)		bfin_write16(NFC_STAT, val)
-#define bfin_read_NFC_IRQSTAT()			bfin_read16(NFC_IRQSTAT)
-#define bfin_write_NFC_IRQSTAT(val)		bfin_write16(NFC_IRQSTAT, val)
-#define bfin_read_NFC_IRQMASK()			bfin_read16(NFC_IRQMASK)
-#define bfin_write_NFC_IRQMASK(val)		bfin_write16(NFC_IRQMASK, val)
-#define bfin_read_NFC_ECC0()			bfin_read16(NFC_ECC0)
-#define bfin_write_NFC_ECC0(val)		bfin_write16(NFC_ECC0, val)
-#define bfin_read_NFC_ECC1()			bfin_read16(NFC_ECC1)
-#define bfin_write_NFC_ECC1(val)		bfin_write16(NFC_ECC1, val)
-#define bfin_read_NFC_ECC2()			bfin_read16(NFC_ECC2)
-#define bfin_write_NFC_ECC2(val)		bfin_write16(NFC_ECC2, val)
-#define bfin_read_NFC_ECC3()			bfin_read16(NFC_ECC3)
-#define bfin_write_NFC_ECC3(val)		bfin_write16(NFC_ECC3, val)
-#define bfin_read_NFC_COUNT()			bfin_read16(NFC_COUNT)
-#define bfin_write_NFC_COUNT(val)		bfin_write16(NFC_COUNT, val)
-#define bfin_read_NFC_RST()			bfin_read16(NFC_RST)
-#define bfin_write_NFC_RST(val)			bfin_write16(NFC_RST, val)
-#define bfin_read_NFC_PGCTL()			bfin_read16(NFC_PGCTL)
-#define bfin_write_NFC_PGCTL(val)		bfin_write16(NFC_PGCTL, val)
-#define bfin_read_NFC_READ()			bfin_read16(NFC_READ)
-#define bfin_write_NFC_READ(val)		bfin_write16(NFC_READ, val)
-#define bfin_read_NFC_ADDR()			bfin_read16(NFC_ADDR)
-#define bfin_write_NFC_ADDR(val)		bfin_write16(NFC_ADDR, val)
-#define bfin_read_NFC_CMD()			bfin_read16(NFC_CMD)
-#define bfin_write_NFC_CMD(val)			bfin_write16(NFC_CMD, val)
-#define bfin_read_NFC_DATA_WR()			bfin_read16(NFC_DATA_WR)
-#define bfin_write_NFC_DATA_WR(val)		bfin_write16(NFC_DATA_WR, val)
-#define bfin_read_NFC_DATA_RD()			bfin_read16(NFC_DATA_RD)
-#define bfin_write_NFC_DATA_RD(val)		bfin_write16(NFC_DATA_RD, val)
-
-#endif /* _CDEF_BF522_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
deleted file mode 100644
index bd045318a250..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _CDEF_BF525_H
-#define _CDEF_BF525_H
-
-/* BF525 is BF522 + USB */
-#include "cdefBF522.h"
-
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR()			bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val)		bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER()			bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val)		bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX()			bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val)		bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX()			bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val)		bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE()			bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val)		bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE()			bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val)		bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB()			bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val)		bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE()		bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val)		bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME()			bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val)		bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX()			bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val)		bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE()		bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val)		bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR()		bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val)		bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL()		bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endpoint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
-
-#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
-
-#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endpoint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
-
-/* USB Endpoint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
-
-/* USB Endpoint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
-
-/* USB Endpoint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
-
-/* USB Endpoint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
-
-/* USB Endpoint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
-
-/* USB Endpoint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
-
-/* USB Endpoint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
-
-#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
-
-#endif /* _CDEF_BF525_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
deleted file mode 100644
index eb22f5866105..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _CDEF_BF527_H
-#define _CDEF_BF527_H
-
-/* BF527 is BF525 + EMAC */
-#include "cdefBF525.h"
-
-/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
-
-#define bfin_read_EMAC_OPMODE()			bfin_read32(EMAC_OPMODE)
-#define bfin_write_EMAC_OPMODE(val)		bfin_write32(EMAC_OPMODE, val)
-#define bfin_read_EMAC_ADDRLO()			bfin_read32(EMAC_ADDRLO)
-#define bfin_write_EMAC_ADDRLO(val)		bfin_write32(EMAC_ADDRLO, val)
-#define bfin_read_EMAC_ADDRHI()			bfin_read32(EMAC_ADDRHI)
-#define bfin_write_EMAC_ADDRHI(val)		bfin_write32(EMAC_ADDRHI, val)
-#define bfin_read_EMAC_HASHLO()			bfin_read32(EMAC_HASHLO)
-#define bfin_write_EMAC_HASHLO(val)		bfin_write32(EMAC_HASHLO, val)
-#define bfin_read_EMAC_HASHHI()			bfin_read32(EMAC_HASHHI)
-#define bfin_write_EMAC_HASHHI(val)		bfin_write32(EMAC_HASHHI, val)
-#define bfin_read_EMAC_STAADD()			bfin_read32(EMAC_STAADD)
-#define bfin_write_EMAC_STAADD(val)		bfin_write32(EMAC_STAADD, val)
-#define bfin_read_EMAC_STADAT()			bfin_read32(EMAC_STADAT)
-#define bfin_write_EMAC_STADAT(val)		bfin_write32(EMAC_STADAT, val)
-#define bfin_read_EMAC_FLC()			bfin_read32(EMAC_FLC)
-#define bfin_write_EMAC_FLC(val)		bfin_write32(EMAC_FLC, val)
-#define bfin_read_EMAC_VLAN1()			bfin_read32(EMAC_VLAN1)
-#define bfin_write_EMAC_VLAN1(val)		bfin_write32(EMAC_VLAN1, val)
-#define bfin_read_EMAC_VLAN2()			bfin_read32(EMAC_VLAN2)
-#define bfin_write_EMAC_VLAN2(val)		bfin_write32(EMAC_VLAN2, val)
-#define bfin_read_EMAC_WKUP_CTL()		bfin_read32(EMAC_WKUP_CTL)
-#define bfin_write_EMAC_WKUP_CTL(val)		bfin_write32(EMAC_WKUP_CTL, val)
-#define bfin_read_EMAC_WKUP_FFMSK0()		bfin_read32(EMAC_WKUP_FFMSK0)
-#define bfin_write_EMAC_WKUP_FFMSK0(val)	bfin_write32(EMAC_WKUP_FFMSK0, val)
-#define bfin_read_EMAC_WKUP_FFMSK1()		bfin_read32(EMAC_WKUP_FFMSK1)
-#define bfin_write_EMAC_WKUP_FFMSK1(val)	bfin_write32(EMAC_WKUP_FFMSK1, val)
-#define bfin_read_EMAC_WKUP_FFMSK2()		bfin_read32(EMAC_WKUP_FFMSK2)
-#define bfin_write_EMAC_WKUP_FFMSK2(val)	bfin_write32(EMAC_WKUP_FFMSK2, val)
-#define bfin_read_EMAC_WKUP_FFMSK3()		bfin_read32(EMAC_WKUP_FFMSK3)
-#define bfin_write_EMAC_WKUP_FFMSK3(val)	bfin_write32(EMAC_WKUP_FFMSK3, val)
-#define bfin_read_EMAC_WKUP_FFCMD()		bfin_read32(EMAC_WKUP_FFCMD)
-#define bfin_write_EMAC_WKUP_FFCMD(val)		bfin_write32(EMAC_WKUP_FFCMD, val)
-#define bfin_read_EMAC_WKUP_FFOFF()		bfin_read32(EMAC_WKUP_FFOFF)
-#define bfin_write_EMAC_WKUP_FFOFF(val)		bfin_write32(EMAC_WKUP_FFOFF, val)
-#define bfin_read_EMAC_WKUP_FFCRC0()		bfin_read32(EMAC_WKUP_FFCRC0)
-#define bfin_write_EMAC_WKUP_FFCRC0(val)	bfin_write32(EMAC_WKUP_FFCRC0, val)
-#define bfin_read_EMAC_WKUP_FFCRC1()		bfin_read32(EMAC_WKUP_FFCRC1)
-#define bfin_write_EMAC_WKUP_FFCRC1(val)	bfin_write32(EMAC_WKUP_FFCRC1, val)
-
-#define bfin_read_EMAC_SYSCTL()			bfin_read32(EMAC_SYSCTL)
-#define bfin_write_EMAC_SYSCTL(val)		bfin_write32(EMAC_SYSCTL, val)
-#define bfin_read_EMAC_SYSTAT()			bfin_read32(EMAC_SYSTAT)
-#define bfin_write_EMAC_SYSTAT(val)		bfin_write32(EMAC_SYSTAT, val)
-#define bfin_read_EMAC_RX_STAT()		bfin_read32(EMAC_RX_STAT)
-#define bfin_write_EMAC_RX_STAT(val)		bfin_write32(EMAC_RX_STAT, val)
-#define bfin_read_EMAC_RX_STKY()		bfin_read32(EMAC_RX_STKY)
-#define bfin_write_EMAC_RX_STKY(val)		bfin_write32(EMAC_RX_STKY, val)
-#define bfin_read_EMAC_RX_IRQE()		bfin_read32(EMAC_RX_IRQE)
-#define bfin_write_EMAC_RX_IRQE(val)		bfin_write32(EMAC_RX_IRQE, val)
-#define bfin_read_EMAC_TX_STAT()		bfin_read32(EMAC_TX_STAT)
-#define bfin_write_EMAC_TX_STAT(val)		bfin_write32(EMAC_TX_STAT, val)
-#define bfin_read_EMAC_TX_STKY()		bfin_read32(EMAC_TX_STKY)
-#define bfin_write_EMAC_TX_STKY(val)		bfin_write32(EMAC_TX_STKY, val)
-#define bfin_read_EMAC_TX_IRQE()		bfin_read32(EMAC_TX_IRQE)
-#define bfin_write_EMAC_TX_IRQE(val)		bfin_write32(EMAC_TX_IRQE, val)
-
-#define bfin_read_EMAC_MMC_CTL()		bfin_read32(EMAC_MMC_CTL)
-#define bfin_write_EMAC_MMC_CTL(val)		bfin_write32(EMAC_MMC_CTL, val)
-#define bfin_read_EMAC_MMC_RIRQS()		bfin_read32(EMAC_MMC_RIRQS)
-#define bfin_write_EMAC_MMC_RIRQS(val)		bfin_write32(EMAC_MMC_RIRQS, val)
-#define bfin_read_EMAC_MMC_RIRQE()		bfin_read32(EMAC_MMC_RIRQE)
-#define bfin_write_EMAC_MMC_RIRQE(val)		bfin_write32(EMAC_MMC_RIRQE, val)
-#define bfin_read_EMAC_MMC_TIRQS()		bfin_read32(EMAC_MMC_TIRQS)
-#define bfin_write_EMAC_MMC_TIRQS(val)		bfin_write32(EMAC_MMC_TIRQS, val)
-#define bfin_read_EMAC_MMC_TIRQE()		bfin_read32(EMAC_MMC_TIRQE)
-#define bfin_write_EMAC_MMC_TIRQE(val)		bfin_write32(EMAC_MMC_TIRQE, val)
-
-#define bfin_read_EMAC_RXC_OK()			bfin_read32(EMAC_RXC_OK)
-#define bfin_write_EMAC_RXC_OK(val)		bfin_write32(EMAC_RXC_OK, val)
-#define bfin_read_EMAC_RXC_FCS()		bfin_read32(EMAC_RXC_FCS)
-#define bfin_write_EMAC_RXC_FCS(val)		bfin_write32(EMAC_RXC_FCS, val)
-#define bfin_read_EMAC_RXC_ALIGN()		bfin_read32(EMAC_RXC_ALIGN)
-#define bfin_write_EMAC_RXC_ALIGN(val)		bfin_write32(EMAC_RXC_ALIGN, val)
-#define bfin_read_EMAC_RXC_OCTET()		bfin_read32(EMAC_RXC_OCTET)
-#define bfin_write_EMAC_RXC_OCTET(val)		bfin_write32(EMAC_RXC_OCTET, val)
-#define bfin_read_EMAC_RXC_DMAOVF()		bfin_read32(EMAC_RXC_DMAOVF)
-#define bfin_write_EMAC_RXC_DMAOVF(val)		bfin_write32(EMAC_RXC_DMAOVF, val)
-#define bfin_read_EMAC_RXC_UNICST()		bfin_read32(EMAC_RXC_UNICST)
-#define bfin_write_EMAC_RXC_UNICST(val)		bfin_write32(EMAC_RXC_UNICST, val)
-#define bfin_read_EMAC_RXC_MULTI()		bfin_read32(EMAC_RXC_MULTI)
-#define bfin_write_EMAC_RXC_MULTI(val)		bfin_write32(EMAC_RXC_MULTI, val)
-#define bfin_read_EMAC_RXC_BROAD()		bfin_read32(EMAC_RXC_BROAD)
-#define bfin_write_EMAC_RXC_BROAD(val)		bfin_write32(EMAC_RXC_BROAD, val)
-#define bfin_read_EMAC_RXC_LNERRI()		bfin_read32(EMAC_RXC_LNERRI)
-#define bfin_write_EMAC_RXC_LNERRI(val)		bfin_write32(EMAC_RXC_LNERRI, val)
-#define bfin_read_EMAC_RXC_LNERRO()		bfin_read32(EMAC_RXC_LNERRO)
-#define bfin_write_EMAC_RXC_LNERRO(val)		bfin_write32(EMAC_RXC_LNERRO, val)
-#define bfin_read_EMAC_RXC_LONG()		bfin_read32(EMAC_RXC_LONG)
-#define bfin_write_EMAC_RXC_LONG(val)		bfin_write32(EMAC_RXC_LONG, val)
-#define bfin_read_EMAC_RXC_MACCTL()		bfin_read32(EMAC_RXC_MACCTL)
-#define bfin_write_EMAC_RXC_MACCTL(val)		bfin_write32(EMAC_RXC_MACCTL, val)
-#define bfin_read_EMAC_RXC_OPCODE()		bfin_read32(EMAC_RXC_OPCODE)
-#define bfin_write_EMAC_RXC_OPCODE(val)		bfin_write32(EMAC_RXC_OPCODE, val)
-#define bfin_read_EMAC_RXC_PAUSE()		bfin_read32(EMAC_RXC_PAUSE)
-#define bfin_write_EMAC_RXC_PAUSE(val)		bfin_write32(EMAC_RXC_PAUSE, val)
-#define bfin_read_EMAC_RXC_ALLFRM()		bfin_read32(EMAC_RXC_ALLFRM)
-#define bfin_write_EMAC_RXC_ALLFRM(val)		bfin_write32(EMAC_RXC_ALLFRM, val)
-#define bfin_read_EMAC_RXC_ALLOCT()		bfin_read32(EMAC_RXC_ALLOCT)
-#define bfin_write_EMAC_RXC_ALLOCT(val)		bfin_write32(EMAC_RXC_ALLOCT, val)
-#define bfin_read_EMAC_RXC_TYPED()		bfin_read32(EMAC_RXC_TYPED)
-#define bfin_write_EMAC_RXC_TYPED(val)		bfin_write32(EMAC_RXC_TYPED, val)
-#define bfin_read_EMAC_RXC_SHORT()		bfin_read32(EMAC_RXC_SHORT)
-#define bfin_write_EMAC_RXC_SHORT(val)		bfin_write32(EMAC_RXC_SHORT, val)
-#define bfin_read_EMAC_RXC_EQ64()		bfin_read32(EMAC_RXC_EQ64)
-#define bfin_write_EMAC_RXC_EQ64(val)		bfin_write32(EMAC_RXC_EQ64, val)
-#define bfin_read_EMAC_RXC_LT128()		bfin_read32(EMAC_RXC_LT128)
-#define bfin_write_EMAC_RXC_LT128(val)		bfin_write32(EMAC_RXC_LT128, val)
-#define bfin_read_EMAC_RXC_LT256()		bfin_read32(EMAC_RXC_LT256)
-#define bfin_write_EMAC_RXC_LT256(val)		bfin_write32(EMAC_RXC_LT256, val)
-#define bfin_read_EMAC_RXC_LT512()		bfin_read32(EMAC_RXC_LT512)
-#define bfin_write_EMAC_RXC_LT512(val)		bfin_write32(EMAC_RXC_LT512, val)
-#define bfin_read_EMAC_RXC_LT1024()		bfin_read32(EMAC_RXC_LT1024)
-#define bfin_write_EMAC_RXC_LT1024(val)		bfin_write32(EMAC_RXC_LT1024, val)
-#define bfin_read_EMAC_RXC_GE1024()		bfin_read32(EMAC_RXC_GE1024)
-#define bfin_write_EMAC_RXC_GE1024(val)		bfin_write32(EMAC_RXC_GE1024, val)
-
-#define bfin_read_EMAC_TXC_OK()			bfin_read32(EMAC_TXC_OK)
-#define bfin_write_EMAC_TXC_OK(val)		bfin_write32(EMAC_TXC_OK, val)
-#define bfin_read_EMAC_TXC_1COL()		bfin_read32(EMAC_TXC_1COL)
-#define bfin_write_EMAC_TXC_1COL(val)		bfin_write32(EMAC_TXC_1COL, val)
-#define bfin_read_EMAC_TXC_GT1COL()		bfin_read32(EMAC_TXC_GT1COL)
-#define bfin_write_EMAC_TXC_GT1COL(val)		bfin_write32(EMAC_TXC_GT1COL, val)
-#define bfin_read_EMAC_TXC_OCTET()		bfin_read32(EMAC_TXC_OCTET)
-#define bfin_write_EMAC_TXC_OCTET(val)		bfin_write32(EMAC_TXC_OCTET, val)
-#define bfin_read_EMAC_TXC_DEFER()		bfin_read32(EMAC_TXC_DEFER)
-#define bfin_write_EMAC_TXC_DEFER(val)		bfin_write32(EMAC_TXC_DEFER, val)
-#define bfin_read_EMAC_TXC_LATECL()		bfin_read32(EMAC_TXC_LATECL)
-#define bfin_write_EMAC_TXC_LATECL(val)		bfin_write32(EMAC_TXC_LATECL, val)
-#define bfin_read_EMAC_TXC_XS_COL()		bfin_read32(EMAC_TXC_XS_COL)
-#define bfin_write_EMAC_TXC_XS_COL(val)		bfin_write32(EMAC_TXC_XS_COL, val)
-#define bfin_read_EMAC_TXC_DMAUND()		bfin_read32(EMAC_TXC_DMAUND)
-#define bfin_write_EMAC_TXC_DMAUND(val)		bfin_write32(EMAC_TXC_DMAUND, val)
-#define bfin_read_EMAC_TXC_CRSERR()		bfin_read32(EMAC_TXC_CRSERR)
-#define bfin_write_EMAC_TXC_CRSERR(val)		bfin_write32(EMAC_TXC_CRSERR, val)
-#define bfin_read_EMAC_TXC_UNICST()		bfin_read32(EMAC_TXC_UNICST)
-#define bfin_write_EMAC_TXC_UNICST(val)		bfin_write32(EMAC_TXC_UNICST, val)
-#define bfin_read_EMAC_TXC_MULTI()		bfin_read32(EMAC_TXC_MULTI)
-#define bfin_write_EMAC_TXC_MULTI(val)		bfin_write32(EMAC_TXC_MULTI, val)
-#define bfin_read_EMAC_TXC_BROAD()		bfin_read32(EMAC_TXC_BROAD)
-#define bfin_write_EMAC_TXC_BROAD(val)		bfin_write32(EMAC_TXC_BROAD, val)
-#define bfin_read_EMAC_TXC_XS_DFR()		bfin_read32(EMAC_TXC_XS_DFR)
-#define bfin_write_EMAC_TXC_XS_DFR(val)		bfin_write32(EMAC_TXC_XS_DFR, val)
-#define bfin_read_EMAC_TXC_MACCTL()		bfin_read32(EMAC_TXC_MACCTL)
-#define bfin_write_EMAC_TXC_MACCTL(val)		bfin_write32(EMAC_TXC_MACCTL, val)
-#define bfin_read_EMAC_TXC_ALLFRM()		bfin_read32(EMAC_TXC_ALLFRM)
-#define bfin_write_EMAC_TXC_ALLFRM(val)		bfin_write32(EMAC_TXC_ALLFRM, val)
-#define bfin_read_EMAC_TXC_ALLOCT()		bfin_read32(EMAC_TXC_ALLOCT)
-#define bfin_write_EMAC_TXC_ALLOCT(val)		bfin_write32(EMAC_TXC_ALLOCT, val)
-#define bfin_read_EMAC_TXC_EQ64()		bfin_read32(EMAC_TXC_EQ64)
-#define bfin_write_EMAC_TXC_EQ64(val)		bfin_write32(EMAC_TXC_EQ64, val)
-#define bfin_read_EMAC_TXC_LT128()		bfin_read32(EMAC_TXC_LT128)
-#define bfin_write_EMAC_TXC_LT128(val)		bfin_write32(EMAC_TXC_LT128, val)
-#define bfin_read_EMAC_TXC_LT256()		bfin_read32(EMAC_TXC_LT256)
-#define bfin_write_EMAC_TXC_LT256(val)		bfin_write32(EMAC_TXC_LT256, val)
-#define bfin_read_EMAC_TXC_LT512()		bfin_read32(EMAC_TXC_LT512)
-#define bfin_write_EMAC_TXC_LT512(val)		bfin_write32(EMAC_TXC_LT512, val)
-#define bfin_read_EMAC_TXC_LT1024()		bfin_read32(EMAC_TXC_LT1024)
-#define bfin_write_EMAC_TXC_LT1024(val)		bfin_write32(EMAC_TXC_LT1024, val)
-#define bfin_read_EMAC_TXC_GE1024()		bfin_read32(EMAC_TXC_GE1024)
-#define bfin_write_EMAC_TXC_GE1024(val)		bfin_write32(EMAC_TXC_GE1024, val)
-#define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
-#define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
-
-#endif /* _CDEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
deleted file mode 100644
index e007017cf958..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/defBF522.h
+++ /dev/null
@@ -1,1309 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the Clear BSD license or the GPL-2 (or later)
- */
-
-#ifndef _DEF_BF522_H
-#define _DEF_BF522_H
-
-/* ************************************************************** */
-/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x    */
-/* ************************************************************** */
-
-/* ==== begin from defBF534.h ==== */
-
-/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
-#define PLL_CTL				0xFFC00000	/* PLL Control Register						*/
-#define PLL_DIV				0xFFC00004	/* PLL Divide Register						*/
-#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register		*/
-#define PLL_STAT			0xFFC0000C	/* PLL Status Register						*/
-#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register					*/
-#define CHIPID        0xFFC00014  /* Device ID Register */
-
-
-/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
-#define SWRST				0xFFC00100	/* Software Reset Register					*/
-#define SYSCR				0xFFC00104	/* System Configuration Register			*/
-#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register	*/
-
-#define SIC_IMASK0			0xFFC0010C	/* Interrupt Mask Register					*/
-#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0			*/
-#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1			*/
-#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2			*/
-#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3			*/
-#define SIC_ISR0				0xFFC00120	/* Interrupt Status Register				*/
-#define SIC_IWR0				0xFFC00124	/* Interrupt Wakeup Register				*/
-
-/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
-#define SIC_IMASK1                      0xFFC0014C     /* Interrupt Mask register of SIC2 */
-#define SIC_IAR4                        0xFFC00150     /* Interrupt Assignment register4 */
-#define SIC_IAR5                        0xFFC00154     /* Interrupt Assignment register5 */
-#define SIC_IAR6                        0xFFC00158     /* Interrupt Assignment register6 */
-#define SIC_IAR7                        0xFFC0015C     /* Interrupt Assignment register7 */
-#define SIC_ISR1                        0xFFC00160     /* Interrupt Statur register */
-#define SIC_IWR1                        0xFFC00164     /* Interrupt Wakeup register */
-
-
-/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
-#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register				*/
-#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register					*/
-#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register					*/
-
-
-/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
-#define RTC_STAT			0xFFC00300	/* RTC Status Register						*/
-#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register			*/
-#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register			*/
-#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register				*/
-#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register					*/
-#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register			*/
-#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro		*/
-
-
-/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
-#define UART0_THR			0xFFC00400	/* Transmit Holding register				*/
-#define UART0_RBR			0xFFC00400	/* Receive Buffer register					*/
-#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)					*/
-#define UART0_IER			0xFFC00404	/* Interrupt Enable Register				*/
-#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)				*/
-#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register		*/
-#define UART0_LCR			0xFFC0040C	/* Line Control Register					*/
-#define UART0_MCR			0xFFC00410	/* Modem Control Register					*/
-#define UART0_LSR			0xFFC00414	/* Line Status Register						*/
-#define UART0_MSR			0xFFC00418	/* Modem Status Register					*/
-#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register						*/
-#define UART0_GCTL			0xFFC00424	/* Global Control Register					*/
-
-
-/* SPI Controller			(0xFFC00500 - 0xFFC005FF)								*/
-#define SPI0_REGBASE			0xFFC00500
-#define SPI_CTL				0xFFC00500	/* SPI Control Register						*/
-#define SPI_FLG				0xFFC00504	/* SPI Flag register						*/
-#define SPI_STAT			0xFFC00508	/* SPI Status register						*/
-#define SPI_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register		*/
-#define SPI_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register			*/
-#define SPI_BAUD			0xFFC00514	/* SPI Baud rate Register					*/
-#define SPI_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register					*/
-
-
-/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
-#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register			*/
-#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register					*/
-#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register					*/
-#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register					*/
-
-#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register  			*/
-#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register        			*/
-#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register         			*/
-#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register          			*/
-
-#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register  			*/
-#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register        			*/
-#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register         			*/
-#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register          			*/
-
-#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register			*/
-#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register					*/
-#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register					*/
-#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register					*/
-
-#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register  			*/
-#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register        			*/
-#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register         			*/
-#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register          			*/
-
-#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register  			*/
-#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register        			*/
-#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register         			*/
-#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register          			*/
-
-#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register  			*/
-#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register        			*/
-#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register         			*/
-#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register          			*/
-
-#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
-#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
-#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
-#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
-
-#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
-#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
-#define TIMER_STATUS		0xFFC00688	/* Timer Status Register					*/
-
-
-/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
-#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register				*/
-#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register		*/
-#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register			*/
-#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register					*/
-#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register	*/
-#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register			*/
-#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register			*/
-#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register	*/
-#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register	*/
-#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register			*/
-#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register			*/
-#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register	*/
-#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register						*/
-#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register					*/
-#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register				*/
-#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register				*/
-#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register 					*/
-
-
-/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
-#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register			*/
-#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register			*/
-#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider					*/
-#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider				*/
-#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register							*/
-#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register							*/
-#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register			*/
-#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register			*/
-#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider						*/
-#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider				*/
-#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register							*/
-#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register					*/
-#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1	*/
-#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2	*/
-#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0	*/
-#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1	*/
-#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2	*/
-#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3	*/
-#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0	*/
-#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1	*/
-#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2	*/
-#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3	*/
-
-
-/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
-#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register			*/
-#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register			*/
-#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider					*/
-#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider				*/
-#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register							*/
-#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register							*/
-#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register			*/
-#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register			*/
-#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider						*/
-#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider				*/
-#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register							*/
-#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register					*/
-#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1	*/
-#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2	*/
-#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0	*/
-#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1	*/
-#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2	*/
-#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3	*/
-#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0	*/
-#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1	*/
-#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2	*/
-#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3	*/
-
-
-/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
-#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register	*/
-#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0	*/
-#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1	*/
-#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register				*/
-#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register					*/
-#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register			*/
-#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register						*/
-
-
-/* DMA Traffic Control Registers													*/
-#define DMAC_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
-#define DMAC_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
-
-/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
-#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register		*/
-#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register					*/
-#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register					*/
-#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register						*/
-#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register						*/
-#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register						*/
-#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register						*/
-#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register	*/
-#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register				*/
-#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register				*/
-#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register				*/
-#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register				*/
-#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register				*/
-
-#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register		*/
-#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register					*/
-#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register					*/
-#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register						*/
-#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register						*/
-#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register						*/
-#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register						*/
-#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register	*/
-#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register				*/
-#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register				*/
-#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register				*/
-#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register				*/
-#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register				*/
-
-#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register		*/
-#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register					*/
-#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register					*/
-#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register						*/
-#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register						*/
-#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register						*/
-#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register						*/
-#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register	*/
-#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register				*/
-#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register				*/
-#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register				*/
-#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register				*/
-#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register				*/
-
-#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register		*/
-#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register					*/
-#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register					*/
-#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register						*/
-#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register						*/
-#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register						*/
-#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register						*/
-#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register	*/
-#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register				*/
-#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register				*/
-#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register				*/
-#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register				*/
-#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register				*/
-
-#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register		*/
-#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register					*/
-#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register					*/
-#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register						*/
-#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register						*/
-#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register						*/
-#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register						*/
-#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register	*/
-#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register				*/
-#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register				*/
-#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register				*/
-#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register				*/
-#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register				*/
-
-#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register		*/
-#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register					*/
-#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register					*/
-#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register						*/
-#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register						*/
-#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register						*/
-#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register						*/
-#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register	*/
-#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register				*/
-#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register				*/
-#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register				*/
-#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register				*/
-#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register				*/
-
-#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register		*/
-#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register					*/
-#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register					*/
-#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register						*/
-#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register						*/
-#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register						*/
-#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register						*/
-#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register	*/
-#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register				*/
-#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register				*/
-#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register				*/
-#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register				*/
-#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register				*/
-
-#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register		*/
-#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register					*/
-#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register					*/
-#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register						*/
-#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register						*/
-#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register						*/
-#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register						*/
-#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register	*/
-#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register				*/
-#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register				*/
-#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register				*/
-#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register				*/
-#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register				*/
-
-#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register		*/
-#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register					*/
-#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register					*/
-#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register						*/
-#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register						*/
-#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register						*/
-#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register						*/
-#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register	*/
-#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register				*/
-#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register				*/
-#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register				*/
-#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register				*/
-#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register				*/
-
-#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register		*/
-#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register					*/
-#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register					*/
-#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register						*/
-#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register						*/
-#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register						*/
-#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register						*/
-#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register	*/
-#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register				*/
-#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register				*/
-#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register				*/
-#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register				*/
-#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register				*/
-
-#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register		*/
-#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register				*/
-#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register				*/
-#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register						*/
-#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register						*/
-#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register						*/
-#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register						*/
-#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register	*/
-#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register				*/
-#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register				*/
-#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register				*/
-#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register				*/
-#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register				*/
-
-#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register		*/
-#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register				*/
-#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register				*/
-#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register						*/
-#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register						*/
-#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register						*/
-#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register						*/
-#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register	*/
-#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register				*/
-#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register				*/
-#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register				*/
-#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register				*/
-#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register				*/
-
-#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register		*/
-#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register				*/
-#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register				*/
-#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register						*/
-#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register					*/
-#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register						*/
-#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register					*/
-#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register	*/
-#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register				*/
-#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register			*/
-#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register				*/
-#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register				*/
-#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register				*/
-
-#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register			*/
-#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register					*/
-#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register					*/
-#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register							*/
-#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register							*/
-#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register							*/
-#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register							*/
-#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register		*/
-#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register					*/
-#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register					*/
-#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register					*/
-#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register					*/
-#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register					*/
-
-#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register		*/
-#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register				*/
-#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register				*/
-#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register						*/
-#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register					*/
-#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register						*/
-#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register					*/
-#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register	*/
-#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register				*/
-#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register			*/
-#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register				*/
-#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register				*/
-#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register				*/
-
-#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register			*/
-#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register					*/
-#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register					*/
-#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register							*/
-#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register							*/
-#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register							*/
-#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register							*/
-#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register		*/
-#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register					*/
-#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register					*/
-#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register					*/
-#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register					*/
-#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register					*/
-
-
-/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
-#define PPI_CONTROL			0xFFC01000	/* PPI Control Register			*/
-#define PPI_STATUS			0xFFC01004	/* PPI Status Register			*/
-#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register	*/
-#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register		*/
-#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register	*/
-
-
-/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
-#define TWI0_REGBASE			0xFFC01400
-#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
-#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
-#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
-#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
-#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
-#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
-#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
-#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
-#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
-#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
-#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
-#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
-#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
-#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
-#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
-#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
-
-
-/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
-#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register				*/
-#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register		*/
-#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register			*/
-#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register					*/
-#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register	*/
-#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register			*/
-#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register			*/
-#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register	*/
-#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register	*/
-#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register			*/
-#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register			*/
-#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register	*/
-#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register						*/
-#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register					*/
-#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register				*/
-#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register				*/
-#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register						*/
-
-
-/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
-#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register				*/
-#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register		*/
-#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register			*/
-#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register					*/
-#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register	*/
-#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register			*/
-#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register			*/
-#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register	*/
-#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register	*/
-#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register			*/
-#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register			*/
-#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register	*/
-#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register						*/
-#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register					*/
-#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register				*/
-#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register				*/
-#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register						*/
-
-
-/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
-#define UART1_THR			0xFFC02000	/* Transmit Holding register			*/
-#define UART1_RBR			0xFFC02000	/* Receive Buffer register				*/
-#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)				*/
-#define UART1_IER			0xFFC02004	/* Interrupt Enable Register			*/
-#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)			*/
-#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register	*/
-#define UART1_LCR			0xFFC0200C	/* Line Control Register				*/
-#define UART1_MCR			0xFFC02010	/* Modem Control Register				*/
-#define UART1_LSR			0xFFC02014	/* Line Status Register					*/
-#define UART1_MSR			0xFFC02018	/* Modem Status Register				*/
-#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register					*/
-#define UART1_GCTL			0xFFC02024	/* Global Control Register				*/
-
-
-/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
-
-/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
-#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)	*/
-#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)	*/
-#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)	*/
-#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register					*/
-
-
-/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
-#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
-#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
-#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
-#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
-#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
-#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
-
-#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
-#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
-#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
-#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
-#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
-#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
-
-/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
-#define PORTF_MUX               0xFFC03210      /* Port F mux control */
-#define PORTG_MUX               0xFFC03214      /* Port G mux control */
-#define PORTH_MUX               0xFFC03218      /* Port H mux control */
-#define PORTF_DRIVE             0xFFC03220      /* Port F drive strength control */
-#define PORTG_DRIVE             0xFFC03224      /* Port G drive strength control */
-#define PORTH_DRIVE             0xFFC03228      /* Port H drive strength control */
-#define PORTF_SLEW              0xFFC03230      /* Port F slew control */
-#define PORTG_SLEW              0xFFC03234      /* Port G slew control */
-#define PORTH_SLEW              0xFFC03238      /* Port H slew control */
-#define PORTF_HYSTERESIS        0xFFC03240      /* Port F Schmitt trigger control */
-#define PORTG_HYSTERESIS        0xFFC03244      /* Port G Schmitt trigger control */
-#define PORTH_HYSTERESIS        0xFFC03248      /* Port H Schmitt trigger control */
-#define MISCPORT_DRIVE          0xFFC03280      /* Misc Port drive strength control */
-#define MISCPORT_SLEW           0xFFC03284      /* Misc Port slew control */
-#define MISCPORT_HYSTERESIS     0xFFC03288      /* Misc Port Schmitt trigger control */
-
-
-/***********************************************************************************
-** System MMR Register Bits And Macros
-**
-** Disclaimer:	All macros are intended to make C and Assembly code more readable.
-**				Use these macros carefully, as any that do left shifts for field
-**				depositing will result in the lower order bits being destroyed.  Any
-**				macro that shifts left to properly position the bit-field should be
-**				used as part of an OR to initialize a register and NOT as a dynamic
-**				modifier UNLESS the lower order bits are saved and ORed back in when
-**				the macro is used.
-*************************************************************************************/
-
-/* CHIPID Masks */
-#define CHIPID_VERSION         0xF0000000
-#define CHIPID_FAMILY          0x0FFFF000
-#define CHIPID_MANUFACTURE     0x00000FFE
-
-/* SWRST Masks																		*/
-#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset			*/
-#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset				*/
-#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault		*/
-#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer			*/
-#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
-
-/* SYSCR Masks																				*/
-#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
-#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
-
-
-/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
-/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK										*/
-
-#if 0
-#define IRQ_PLL_WAKEUP	0x00000001	/* PLL Wakeup Interrupt			 					*/
-
-#define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
-#define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
-#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
-#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
-#define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
-#define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
-
-#define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
-#define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
-#define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
-#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
-#define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
-#define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
-#define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
-#define IRQ_CAN_RX		0x00008000	/* CAN Receive Interrupt 							*/
-
-#define IRQ_CAN_TX		0x00010000	/* CAN Transmit Interrupt  							*/
-#define IRQ_DMA1		0x00020000	/* DMA Channel 1 (Ethernet RX) Interrupt 			*/
-#define IRQ_PFA_PORTH	0x00020000	/* PF Port H (PF47:32) Interrupt A 					*/
-#define IRQ_DMA2		0x00040000	/* DMA Channel 2 (Ethernet TX) Interrupt 			*/
-#define IRQ_PFB_PORTH	0x00040000	/* PF Port H (PF47:32) Interrupt B 					*/
-#define IRQ_TIMER0		0x00080000	/* Timer 0 Interrupt								*/
-#define IRQ_TIMER1		0x00100000	/* Timer 1 Interrupt 								*/
-#define IRQ_TIMER2		0x00200000	/* Timer 2 Interrupt 								*/
-#define IRQ_TIMER3		0x00400000	/* Timer 3 Interrupt 								*/
-#define IRQ_TIMER4		0x00800000	/* Timer 4 Interrupt 								*/
-
-#define IRQ_TIMER5		0x01000000	/* Timer 5 Interrupt 								*/
-#define IRQ_TIMER6		0x02000000	/* Timer 6 Interrupt 								*/
-#define IRQ_TIMER7		0x04000000	/* Timer 7 Interrupt 								*/
-#define IRQ_PFA_PORTFG	0x08000000	/* PF Ports F&G (PF31:0) Interrupt A 				*/
-#define IRQ_PFB_PORTF	0x80000000	/* PF Port F (PF15:0) Interrupt B 					*/
-#define IRQ_DMA12		0x20000000	/* DMA Channels 12 (MDMA1 Source) RX Interrupt 		*/
-#define IRQ_DMA13		0x20000000	/* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
-#define IRQ_DMA14		0x40000000	/* DMA Channels 14 (MDMA0 Source) RX Interrupt 		*/
-#define IRQ_DMA15		0x40000000	/* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
-#define IRQ_WDOG		0x80000000	/* Software Watchdog Timer Interrupt 				*/
-#define IRQ_PFB_PORTG	0x10000000	/* PF Port G (PF31:16) Interrupt B 					*/
-#endif
-
-/* SIC_IAR0 Macros															*/
-#define P0_IVG(x)		(((x)&0xF)-7)			/* Peripheral #0 assigned IVG #x 	*/
-#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x 	*/
-#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x 	*/
-#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x	*/
-#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x	*/
-#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x	*/
-#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x	*/
-#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x	*/
-
-/* SIC_IAR1 Macros															*/
-#define P8_IVG(x)		(((x)&0xF)-7)			/* Peripheral #8 assigned IVG #x 	*/
-#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x 	*/
-#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x	*/
-#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x 	*/
-#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x	*/
-#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x	*/
-#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x	*/
-#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x	*/
-
-/* SIC_IAR2 Macros															*/
-#define P16_IVG(x)		(((x)&0xF)-7)			/* Peripheral #16 assigned IVG #x	*/
-#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x	*/
-#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x	*/
-#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x	*/
-#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x	*/
-#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x	*/
-#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x	*/
-#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x	*/
-
-/* SIC_IAR3 Macros															*/
-#define P24_IVG(x)		(((x)&0xF)-7)			/* Peripheral #24 assigned IVG #x	*/
-#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x	*/
-#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x	*/
-#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x	*/
-#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x	*/
-#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x	*/
-#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x	*/
-#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x	*/
-
-
-/* SIC_IMASK Masks																		*/
-#define SIC_UNMASK_ALL	0x00000000					/* Unmask all peripheral interrupts	*/
-#define SIC_MASK_ALL	0xFFFFFFFF					/* Mask all peripheral interrupts	*/
-#define SIC_MASK(x)		(1 << ((x)&0x1F))					/* Mask Peripheral #x interrupt		*/
-#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt	*/
-
-/* SIC_IWR Masks																		*/
-#define IWR_DISABLE_ALL	0x00000000					/* Wakeup Disable all peripherals	*/
-#define IWR_ENABLE_ALL	0xFFFFFFFF					/* Wakeup Enable all peripherals	*/
-#define IWR_ENABLE(x)	(1 << ((x)&0x1F))					/* Wakeup Enable Peripheral #x		*/
-#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
-
-/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
-/* TIMER_ENABLE Masks													*/
-#define TIMEN0			0x0001		/* Enable Timer 0					*/
-#define TIMEN1			0x0002		/* Enable Timer 1					*/
-#define TIMEN2			0x0004		/* Enable Timer 2					*/
-#define TIMEN3			0x0008		/* Enable Timer 3					*/
-#define TIMEN4			0x0010		/* Enable Timer 4					*/
-#define TIMEN5			0x0020		/* Enable Timer 5					*/
-#define TIMEN6			0x0040		/* Enable Timer 6					*/
-#define TIMEN7			0x0080		/* Enable Timer 7					*/
-
-/* TIMER_DISABLE Masks													*/
-#define TIMDIS0			TIMEN0		/* Disable Timer 0					*/
-#define TIMDIS1			TIMEN1		/* Disable Timer 1					*/
-#define TIMDIS2			TIMEN2		/* Disable Timer 2					*/
-#define TIMDIS3			TIMEN3		/* Disable Timer 3					*/
-#define TIMDIS4			TIMEN4		/* Disable Timer 4					*/
-#define TIMDIS5			TIMEN5		/* Disable Timer 5					*/
-#define TIMDIS6			TIMEN6		/* Disable Timer 6					*/
-#define TIMDIS7			TIMEN7		/* Disable Timer 7					*/
-
-/* TIMER_STATUS Masks													*/
-#define TIMIL0			0x00000001	/* Timer 0 Interrupt				*/
-#define TIMIL1			0x00000002	/* Timer 1 Interrupt				*/
-#define TIMIL2			0x00000004	/* Timer 2 Interrupt				*/
-#define TIMIL3			0x00000008	/* Timer 3 Interrupt				*/
-#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
-#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
-#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
-#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
-#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status		*/
-#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status		*/
-#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status		*/
-#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status		*/
-#define TIMIL4			0x00010000	/* Timer 4 Interrupt				*/
-#define TIMIL5			0x00020000	/* Timer 5 Interrupt				*/
-#define TIMIL6			0x00040000	/* Timer 6 Interrupt				*/
-#define TIMIL7			0x00080000	/* Timer 7 Interrupt				*/
-#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
-#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
-#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
-#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
-#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status		*/
-#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status		*/
-#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status		*/
-#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status		*/
-
-/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
-#define TOVL_ERR0 TOVF_ERR0
-#define TOVL_ERR1 TOVF_ERR1
-#define TOVL_ERR2 TOVF_ERR2
-#define TOVL_ERR3 TOVF_ERR3
-#define TOVL_ERR4 TOVF_ERR4
-#define TOVL_ERR5 TOVF_ERR5
-#define TOVL_ERR6 TOVF_ERR6
-#define TOVL_ERR7 TOVF_ERR7
-
-/* TIMERx_CONFIG Masks													*/
-#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode	*/
-#define WDTH_CAP		0x0002	/* Width Capture Input Mode				*/
-#define EXT_CLK			0x0003	/* External Clock Mode					*/
-#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)	*/
-#define PERIOD_CNT		0x0008	/* Period Count							*/
-#define IRQ_ENA			0x0010	/* Interrupt Request Enable				*/
-#define TIN_SEL			0x0020	/* Timer Input Select					*/
-#define OUT_DIS			0x0040	/* Output Pad Disable					*/
-#define CLK_SEL			0x0080	/* Timer Clock Select					*/
-#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode			*/
-#define EMU_RUN			0x0200	/* Emulation Behavior Select			*/
-#define ERR_TYP			0xC000	/* Error Type							*/
-
-/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
-/* EBIU_AMGCTL Masks																	*/
-#define AMCKEN			0x0001		/* Enable CLKOUT									*/
-#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
-#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
-#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
-#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
-#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
-
-/* EBIU_AMBCTL0 Masks																	*/
-#define B0RDYEN			0x00000001  /* Bank 0 (B0) RDY Enable							*/
-#define B0RDYPOL		0x00000002  /* B0 RDY Active High								*/
-#define B0TT_1			0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle		*/
-#define B0TT_2			0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles	*/
-#define B0TT_3			0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles	*/
-#define B0TT_4			0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles	*/
-#define B0ST_1			0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle		*/
-#define B0ST_2			0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles		*/
-#define B0ST_3			0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles		*/
-#define B0ST_4			0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles		*/
-#define B0HT_1			0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
-#define B0HT_2			0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
-#define B0HT_3			0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
-#define B0HT_0			0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
-#define B0RAT_1			0x00000100  /* B0 Read Access Time = 1 cycle					*/
-#define B0RAT_2			0x00000200  /* B0 Read Access Time = 2 cycles					*/
-#define B0RAT_3			0x00000300  /* B0 Read Access Time = 3 cycles					*/
-#define B0RAT_4			0x00000400  /* B0 Read Access Time = 4 cycles					*/
-#define B0RAT_5			0x00000500  /* B0 Read Access Time = 5 cycles					*/
-#define B0RAT_6			0x00000600  /* B0 Read Access Time = 6 cycles					*/
-#define B0RAT_7			0x00000700  /* B0 Read Access Time = 7 cycles					*/
-#define B0RAT_8			0x00000800  /* B0 Read Access Time = 8 cycles					*/
-#define B0RAT_9			0x00000900  /* B0 Read Access Time = 9 cycles					*/
-#define B0RAT_10		0x00000A00  /* B0 Read Access Time = 10 cycles					*/
-#define B0RAT_11		0x00000B00  /* B0 Read Access Time = 11 cycles					*/
-#define B0RAT_12		0x00000C00  /* B0 Read Access Time = 12 cycles					*/
-#define B0RAT_13		0x00000D00  /* B0 Read Access Time = 13 cycles					*/
-#define B0RAT_14		0x00000E00  /* B0 Read Access Time = 14 cycles					*/
-#define B0RAT_15		0x00000F00  /* B0 Read Access Time = 15 cycles					*/
-#define B0WAT_1			0x00001000  /* B0 Write Access Time = 1 cycle					*/
-#define B0WAT_2			0x00002000  /* B0 Write Access Time = 2 cycles					*/
-#define B0WAT_3			0x00003000  /* B0 Write Access Time = 3 cycles					*/
-#define B0WAT_4			0x00004000  /* B0 Write Access Time = 4 cycles					*/
-#define B0WAT_5			0x00005000  /* B0 Write Access Time = 5 cycles					*/
-#define B0WAT_6			0x00006000  /* B0 Write Access Time = 6 cycles					*/
-#define B0WAT_7			0x00007000  /* B0 Write Access Time = 7 cycles					*/
-#define B0WAT_8			0x00008000  /* B0 Write Access Time = 8 cycles					*/
-#define B0WAT_9			0x00009000  /* B0 Write Access Time = 9 cycles					*/
-#define B0WAT_10		0x0000A000  /* B0 Write Access Time = 10 cycles					*/
-#define B0WAT_11		0x0000B000  /* B0 Write Access Time = 11 cycles					*/
-#define B0WAT_12		0x0000C000  /* B0 Write Access Time = 12 cycles					*/
-#define B0WAT_13		0x0000D000  /* B0 Write Access Time = 13 cycles					*/
-#define B0WAT_14		0x0000E000  /* B0 Write Access Time = 14 cycles					*/
-#define B0WAT_15		0x0000F000  /* B0 Write Access Time = 15 cycles					*/
-
-#define B1RDYEN			0x00010000  /* Bank 1 (B1) RDY Enable                       	*/
-#define B1RDYPOL		0x00020000  /* B1 RDY Active High                           	*/
-#define B1TT_1			0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle 	*/
-#define B1TT_2			0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles	*/
-#define B1TT_3			0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles	*/
-#define B1TT_4			0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles	*/
-#define B1ST_1			0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle  	*/
-#define B1ST_2			0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles 	*/
-#define B1ST_3			0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles 	*/
-#define B1ST_4			0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles 	*/
-#define B1HT_1			0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle 	*/
-#define B1HT_2			0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
-#define B1HT_3			0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
-#define B1HT_0			0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
-#define B1RAT_1			0x01000000  /* B1 Read Access Time = 1 cycle					*/
-#define B1RAT_2			0x02000000  /* B1 Read Access Time = 2 cycles					*/
-#define B1RAT_3			0x03000000  /* B1 Read Access Time = 3 cycles					*/
-#define B1RAT_4			0x04000000  /* B1 Read Access Time = 4 cycles					*/
-#define B1RAT_5			0x05000000  /* B1 Read Access Time = 5 cycles					*/
-#define B1RAT_6			0x06000000  /* B1 Read Access Time = 6 cycles					*/
-#define B1RAT_7			0x07000000  /* B1 Read Access Time = 7 cycles					*/
-#define B1RAT_8			0x08000000  /* B1 Read Access Time = 8 cycles					*/
-#define B1RAT_9			0x09000000  /* B1 Read Access Time = 9 cycles					*/
-#define B1RAT_10		0x0A000000  /* B1 Read Access Time = 10 cycles					*/
-#define B1RAT_11		0x0B000000  /* B1 Read Access Time = 11 cycles					*/
-#define B1RAT_12		0x0C000000  /* B1 Read Access Time = 12 cycles					*/
-#define B1RAT_13		0x0D000000  /* B1 Read Access Time = 13 cycles					*/
-#define B1RAT_14		0x0E000000  /* B1 Read Access Time = 14 cycles					*/
-#define B1RAT_15		0x0F000000  /* B1 Read Access Time = 15 cycles					*/
-#define B1WAT_1			0x10000000  /* B1 Write Access Time = 1 cycle					*/
-#define B1WAT_2			0x20000000  /* B1 Write Access Time = 2 cycles					*/
-#define B1WAT_3			0x30000000  /* B1 Write Access Time = 3 cycles					*/
-#define B1WAT_4			0x40000000  /* B1 Write Access Time = 4 cycles					*/
-#define B1WAT_5			0x50000000  /* B1 Write Access Time = 5 cycles					*/
-#define B1WAT_6			0x60000000  /* B1 Write Access Time = 6 cycles					*/
-#define B1WAT_7			0x70000000  /* B1 Write Access Time = 7 cycles					*/
-#define B1WAT_8			0x80000000  /* B1 Write Access Time = 8 cycles					*/
-#define B1WAT_9			0x90000000  /* B1 Write Access Time = 9 cycles					*/
-#define B1WAT_10		0xA0000000  /* B1 Write Access Time = 10 cycles					*/
-#define B1WAT_11		0xB0000000  /* B1 Write Access Time = 11 cycles					*/
-#define B1WAT_12		0xC0000000  /* B1 Write Access Time = 12 cycles					*/
-#define B1WAT_13		0xD0000000  /* B1 Write Access Time = 13 cycles					*/
-#define B1WAT_14		0xE0000000  /* B1 Write Access Time = 14 cycles					*/
-#define B1WAT_15		0xF0000000  /* B1 Write Access Time = 15 cycles					*/
-
-/* EBIU_AMBCTL1 Masks																	*/
-#define B2RDYEN			0x00000001  /* Bank 2 (B2) RDY Enable							*/
-#define B2RDYPOL		0x00000002  /* B2 RDY Active High								*/
-#define B2TT_1			0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle		*/
-#define B2TT_2			0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles	*/
-#define B2TT_3			0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles	*/
-#define B2TT_4			0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles	*/
-#define B2ST_1			0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle		*/
-#define B2ST_2			0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles		*/
-#define B2ST_3			0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles		*/
-#define B2ST_4			0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles		*/
-#define B2HT_1			0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
-#define B2HT_2			0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
-#define B2HT_3			0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
-#define B2HT_0			0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
-#define B2RAT_1			0x00000100  /* B2 Read Access Time = 1 cycle					*/
-#define B2RAT_2			0x00000200  /* B2 Read Access Time = 2 cycles					*/
-#define B2RAT_3			0x00000300  /* B2 Read Access Time = 3 cycles					*/
-#define B2RAT_4			0x00000400  /* B2 Read Access Time = 4 cycles					*/
-#define B2RAT_5			0x00000500  /* B2 Read Access Time = 5 cycles					*/
-#define B2RAT_6			0x00000600  /* B2 Read Access Time = 6 cycles					*/
-#define B2RAT_7			0x00000700  /* B2 Read Access Time = 7 cycles					*/
-#define B2RAT_8			0x00000800  /* B2 Read Access Time = 8 cycles					*/
-#define B2RAT_9			0x00000900  /* B2 Read Access Time = 9 cycles					*/
-#define B2RAT_10		0x00000A00  /* B2 Read Access Time = 10 cycles					*/
-#define B2RAT_11		0x00000B00  /* B2 Read Access Time = 11 cycles					*/
-#define B2RAT_12		0x00000C00  /* B2 Read Access Time = 12 cycles					*/
-#define B2RAT_13		0x00000D00  /* B2 Read Access Time = 13 cycles					*/
-#define B2RAT_14		0x00000E00  /* B2 Read Access Time = 14 cycles					*/
-#define B2RAT_15		0x00000F00  /* B2 Read Access Time = 15 cycles					*/
-#define B2WAT_1			0x00001000  /* B2 Write Access Time = 1 cycle					*/
-#define B2WAT_2			0x00002000  /* B2 Write Access Time = 2 cycles					*/
-#define B2WAT_3			0x00003000  /* B2 Write Access Time = 3 cycles					*/
-#define B2WAT_4			0x00004000  /* B2 Write Access Time = 4 cycles					*/
-#define B2WAT_5			0x00005000  /* B2 Write Access Time = 5 cycles					*/
-#define B2WAT_6			0x00006000  /* B2 Write Access Time = 6 cycles					*/
-#define B2WAT_7			0x00007000  /* B2 Write Access Time = 7 cycles					*/
-#define B2WAT_8			0x00008000  /* B2 Write Access Time = 8 cycles					*/
-#define B2WAT_9			0x00009000  /* B2 Write Access Time = 9 cycles					*/
-#define B2WAT_10		0x0000A000  /* B2 Write Access Time = 10 cycles					*/
-#define B2WAT_11		0x0000B000  /* B2 Write Access Time = 11 cycles					*/
-#define B2WAT_12		0x0000C000  /* B2 Write Access Time = 12 cycles					*/
-#define B2WAT_13		0x0000D000  /* B2 Write Access Time = 13 cycles					*/
-#define B2WAT_14		0x0000E000  /* B2 Write Access Time = 14 cycles					*/
-#define B2WAT_15		0x0000F000  /* B2 Write Access Time = 15 cycles					*/
-
-#define B3RDYEN			0x00010000  /* Bank 3 (B3) RDY Enable							*/
-#define B3RDYPOL		0x00020000  /* B3 RDY Active High								*/
-#define B3TT_1			0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle		*/
-#define B3TT_2			0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles	*/
-#define B3TT_3			0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles	*/
-#define B3TT_4			0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles	*/
-#define B3ST_1			0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle		*/
-#define B3ST_2			0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles		*/
-#define B3ST_3			0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles		*/
-#define B3ST_4			0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles		*/
-#define B3HT_1			0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
-#define B3HT_2			0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
-#define B3HT_3			0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
-#define B3HT_0			0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
-#define B3RAT_1			0x01000000  /* B3 Read Access Time = 1 cycle					*/
-#define B3RAT_2			0x02000000  /* B3 Read Access Time = 2 cycles					*/
-#define B3RAT_3			0x03000000  /* B3 Read Access Time = 3 cycles					*/
-#define B3RAT_4			0x04000000  /* B3 Read Access Time = 4 cycles					*/
-#define B3RAT_5			0x05000000  /* B3 Read Access Time = 5 cycles					*/
-#define B3RAT_6			0x06000000  /* B3 Read Access Time = 6 cycles					*/
-#define B3RAT_7			0x07000000  /* B3 Read Access Time = 7 cycles					*/
-#define B3RAT_8			0x08000000  /* B3 Read Access Time = 8 cycles					*/
-#define B3RAT_9			0x09000000  /* B3 Read Access Time = 9 cycles					*/
-#define B3RAT_10		0x0A000000  /* B3 Read Access Time = 10 cycles					*/
-#define B3RAT_11		0x0B000000  /* B3 Read Access Time = 11 cycles					*/
-#define B3RAT_12		0x0C000000  /* B3 Read Access Time = 12 cycles					*/
-#define B3RAT_13		0x0D000000  /* B3 Read Access Time = 13 cycles					*/
-#define B3RAT_14		0x0E000000  /* B3 Read Access Time = 14 cycles					*/
-#define B3RAT_15		0x0F000000  /* B3 Read Access Time = 15 cycles					*/
-#define B3WAT_1			0x10000000  /* B3 Write Access Time = 1 cycle					*/
-#define B3WAT_2			0x20000000  /* B3 Write Access Time = 2 cycles					*/
-#define B3WAT_3			0x30000000  /* B3 Write Access Time = 3 cycles					*/
-#define B3WAT_4			0x40000000  /* B3 Write Access Time = 4 cycles					*/
-#define B3WAT_5			0x50000000  /* B3 Write Access Time = 5 cycles					*/
-#define B3WAT_6			0x60000000  /* B3 Write Access Time = 6 cycles					*/
-#define B3WAT_7			0x70000000  /* B3 Write Access Time = 7 cycles					*/
-#define B3WAT_8			0x80000000  /* B3 Write Access Time = 8 cycles					*/
-#define B3WAT_9			0x90000000  /* B3 Write Access Time = 9 cycles					*/
-#define B3WAT_10		0xA0000000  /* B3 Write Access Time = 10 cycles					*/
-#define B3WAT_11		0xB0000000  /* B3 Write Access Time = 11 cycles					*/
-#define B3WAT_12		0xC0000000  /* B3 Write Access Time = 12 cycles					*/
-#define B3WAT_13		0xD0000000  /* B3 Write Access Time = 13 cycles					*/
-#define B3WAT_14		0xE0000000  /* B3 Write Access Time = 14 cycles					*/
-#define B3WAT_15		0xF0000000  /* B3 Write Access Time = 15 cycles					*/
-
-
-/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
-/* EBIU_SDGCTL Masks																			*/
-#define SCTLE			0x00000001	/* Enable SDRAM Signals										*/
-#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles								*/
-#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles								*/
-#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
-#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
-#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
-#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle										*/
-#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles									*/
-#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles									*/
-#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles									*/
-#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles									*/
-#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles									*/
-#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles									*/
-#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles									*/
-#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles									*/
-#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles									*/
-#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles									*/
-#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles									*/
-#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles									*/
-#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles									*/
-#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles									*/
-#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle										*/
-#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles										*/
-#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles										*/
-#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles										*/
-#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles										*/
-#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles										*/
-#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles										*/
-#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle										*/
-#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles									*/
-#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles									*/
-#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles									*/
-#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles									*/
-#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles									*/
-#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles									*/
-#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle										*/
-#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles										*/
-#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles										*/
-#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
-#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)	*/
-#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
-#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode							*/
-#define EBUFE			0x02000000	/* Enable External Buffering Timing							*/
-#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
-#define EMREN			0x10000000	/* Extended Mode Register Enable							*/
-#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)		*/
-#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant					*/
-
-/* EBIU_SDBCTL Masks																		*/
-#define EBE				0x0001		/* Enable SDRAM External Bank							*/
-#define EBSZ_16			0x0000		/* SDRAM External Bank Size = 16MB	*/
-#define EBSZ_32			0x0002		/* SDRAM External Bank Size = 32MB	*/
-#define EBSZ_64			0x0004		/* SDRAM External Bank Size = 64MB	*/
-#define EBSZ_128		0x0006		/* SDRAM External Bank Size = 128MB		*/
-#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
-#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
-#define EBCAW_8			0x0000		/* SDRAM External Bank Column Address Width = 8 Bits	*/
-#define EBCAW_9			0x0010		/* SDRAM External Bank Column Address Width = 9 Bits	*/
-#define EBCAW_10		0x0020		/* SDRAM External Bank Column Address Width = 10 Bits	*/
-#define EBCAW_11		0x0030		/* SDRAM External Bank Column Address Width = 11 Bits	*/
-
-/* EBIU_SDSTAT Masks														*/
-#define SDCI			0x0001		/* SDRAM Controller Idle 				*/
-#define SDSRA			0x0002		/* SDRAM Self-Refresh Active			*/
-#define SDPUA			0x0004		/* SDRAM Power-Up Active 				*/
-#define SDRS			0x0008		/* SDRAM Will Power-Up On Next Access	*/
-#define SDEASE			0x0010		/* SDRAM EAB Sticky Error Status		*/
-#define BGSTAT			0x0020		/* Bus Grant Status						*/
-
-
-/* **************************  DMA CONTROLLER MASKS  ********************************/
-
-/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
-#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
-#define PMAP			0xF000	/* Peripheral Mapped To This Channel				*/
-#define PMAP_PPI		0x0000	/* 		PPI Port DMA								*/
-#define	PMAP_EMACRX		0x1000	/* 		Ethernet Receive DMA						*/
-#define PMAP_EMACTX		0x2000	/* 		Ethernet Transmit DMA						*/
-#define PMAP_SPORT0RX	0x3000	/* 		SPORT0 Receive DMA							*/
-#define PMAP_SPORT0TX	0x4000	/* 		SPORT0 Transmit DMA							*/
-#define PMAP_SPORT1RX	0x5000	/* 		SPORT1 Receive DMA							*/
-#define PMAP_SPORT1TX	0x6000	/* 		SPORT1 Transmit DMA							*/
-#define PMAP_SPI		0x7000	/* 		SPI Port DMA								*/
-#define PMAP_UART0RX	0x8000	/* 		UART0 Port Receive DMA						*/
-#define PMAP_UART0TX	0x9000	/* 		UART0 Port Transmit DMA						*/
-#define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
-#define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
-
-/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
-/*  PPI_CONTROL Masks													*/
-#define PORT_EN			0x0001		/* PPI Port Enable					*/
-#define PORT_DIR		0x0002		/* PPI Port Direction				*/
-#define XFR_TYPE		0x000C		/* PPI Transfer Type				*/
-#define PORT_CFG		0x0030		/* PPI Port Configuration			*/
-#define FLD_SEL			0x0040		/* PPI Active Field Select			*/
-#define PACK_EN			0x0080		/* PPI Packing Mode					*/
-#define DMA32			0x0100		/* PPI 32-bit DMA Enable			*/
-#define SKIP_EN			0x0200		/* PPI Skip Element Enable			*/
-#define SKIP_EO			0x0400		/* PPI Skip Even/Odd Elements		*/
-#define DLEN_8			0x0000		/* Data Length = 8 Bits				*/
-#define DLEN_10			0x0800		/* Data Length = 10 Bits			*/
-#define DLEN_11			0x1000		/* Data Length = 11 Bits			*/
-#define DLEN_12			0x1800		/* Data Length = 12 Bits			*/
-#define DLEN_13			0x2000		/* Data Length = 13 Bits			*/
-#define DLEN_14			0x2800		/* Data Length = 14 Bits			*/
-#define DLEN_15			0x3000		/* Data Length = 15 Bits			*/
-#define DLEN_16			0x3800		/* Data Length = 16 Bits			*/
-#define DLENGTH			0x3800		/* PPI Data Length  */
-#define POLC			0x4000		/* PPI Clock Polarity				*/
-#define POLS			0x8000		/* PPI Frame Sync Polarity			*/
-
-/* PPI_STATUS Masks														*/
-#define FLD				0x0400		/* Field Indicator					*/
-#define FT_ERR			0x0800		/* Frame Track Error				*/
-#define OVR				0x1000		/* FIFO Overflow Error				*/
-#define UNDR			0x2000		/* FIFO Underrun Error				*/
-#define ERR_DET			0x4000		/* Error Detected Indicator			*/
-#define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
-
-
-/* Omit CAN masks from defBF534.h */
-
-/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
-/* PORT_MUX Masks															*/
-#define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
-#define	PJSE_SPORT		0x0000			/* 		Enable TFS0/DT0PRI			*/
-#define	PJSE_SPI		0x0001			/* 		Enable SPI_SSEL3:2			*/
-
-#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable		*/
-#define	PJCE_SPORT		0x0000			/* 		Enable DR0SEC/DT0SEC		*/
-#define	PJCE_CAN		0x0002			/* 		Enable CAN RX/TX			*/
-#define	PJCE_SPI		0x0004			/* 		Enable SPI_SSEL7			*/
-
-#define	PFDE			0x0008			/* Port F DMA Request Enable		*/
-#define	PFDE_UART		0x0000			/* 		Enable UART0 RX/TX			*/
-#define	PFDE_DMA		0x0008			/* 		Enable DMAR1:0				*/
-
-#define	PFTE			0x0010			/* Port F Timer Enable				*/
-#define	PFTE_UART		0x0000			/*		Enable UART1 RX/TX			*/
-#define	PFTE_TIMER		0x0010			/* 		Enable TMR7:6				*/
-
-#define	PFS6E			0x0020			/* Port F SPI SSEL 6 Enable			*/
-#define	PFS6E_TIMER		0x0000			/*		Enable TMR5					*/
-#define	PFS6E_SPI		0x0020			/* 		Enable SPI_SSEL6			*/
-
-#define	PFS5E			0x0040			/* Port F SPI SSEL 5 Enable			*/
-#define	PFS5E_TIMER		0x0000			/*		Enable TMR4					*/
-#define	PFS5E_SPI		0x0040			/* 		Enable SPI_SSEL5			*/
-
-#define	PFS4E			0x0080			/* Port F SPI SSEL 4 Enable			*/
-#define	PFS4E_TIMER		0x0000			/*		Enable TMR3					*/
-#define	PFS4E_SPI		0x0080			/* 		Enable SPI_SSEL4			*/
-
-#define	PFFE			0x0100			/* Port F PPI Frame Sync Enable		*/
-#define	PFFE_TIMER		0x0000			/* 		Enable TMR2					*/
-#define	PFFE_PPI		0x0100			/* 		Enable PPI FS3				*/
-
-#define	PGSE			0x0200			/* Port G SPORT1 Secondary Enable	*/
-#define	PGSE_PPI		0x0000			/* 		Enable PPI D9:8				*/
-#define	PGSE_SPORT		0x0200			/* 		Enable DR1SEC/DT1SEC		*/
-
-#define	PGRE			0x0400			/* Port G SPORT1 Receive Enable		*/
-#define	PGRE_PPI		0x0000			/* 		Enable PPI D12:10			*/
-#define	PGRE_SPORT		0x0400			/* 		Enable DR1PRI/RFS1/RSCLK1	*/
-
-#define	PGTE			0x0800			/* Port G SPORT1 Transmit Enable	*/
-#define	PGTE_PPI		0x0000			/* 		Enable PPI D15:13			*/
-#define	PGTE_SPORT		0x0800			/* 		Enable DT1PRI/TFS1/TSCLK1	*/
-
-/* entry addresses of the user-callable Boot ROM functions */
-
-#define _BOOTROM_RESET 0xEF000000
-#define _BOOTROM_FINAL_INIT 0xEF000002
-#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
-#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
-#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
-#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
-
-/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
-#define	PGDE_UART   PFDE_UART
-#define	PGDE_DMA    PFDE_DMA
-#define	CKELOW		SCKELOW
-
-/* ==== end from defBF534.h ==== */
-
-/* HOST Port Registers */
-
-#define                     HOST_CONTROL  0xffc03400   /* HOST Control Register */
-#define                      HOST_STATUS  0xffc03404   /* HOST Status Register */
-#define                     HOST_TIMEOUT  0xffc03408   /* HOST Acknowledge Mode Timeout Register */
-
-/* Counter Registers */
-
-#define                       CNT_CONFIG  0xffc03500   /* Configuration Register */
-#define                        CNT_IMASK  0xffc03504   /* Interrupt Mask Register */
-#define                       CNT_STATUS  0xffc03508   /* Status Register */
-#define                      CNT_COMMAND  0xffc0350c   /* Command Register */
-#define                     CNT_DEBOUNCE  0xffc03510   /* Debounce Register */
-#define                      CNT_COUNTER  0xffc03514   /* Counter Register */
-#define                          CNT_MAX  0xffc03518   /* Maximal Count Register */
-#define                          CNT_MIN  0xffc0351c   /* Minimal Count Register */
-
-/* OTP/FUSE Registers */
-
-#define                      OTP_CONTROL  0xffc03600   /* OTP/Fuse Control Register */
-#define                          OTP_BEN  0xffc03604   /* OTP/Fuse Byte Enable */
-#define                       OTP_STATUS  0xffc03608   /* OTP/Fuse Status */
-#define                       OTP_TIMING  0xffc0360c   /* OTP/Fuse Access Timing */
-
-/* Security Registers */
-
-#define                    SECURE_SYSSWT  0xffc03620   /* Secure System Switches */
-#define                   SECURE_CONTROL  0xffc03624   /* Secure Control */
-#define                    SECURE_STATUS  0xffc03628   /* Secure Status */
-
-/* OTP Read/Write Data Buffer Registers */
-
-#define                        OTP_DATA0  0xffc03680   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
-#define                        OTP_DATA1  0xffc03684   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
-#define                        OTP_DATA2  0xffc03688   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
-#define                        OTP_DATA3  0xffc0368c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
-
-/* NFC Registers */
-
-#define                          NFC_CTL  0xffc03700   /* NAND Control Register */
-#define                         NFC_STAT  0xffc03704   /* NAND Status Register */
-#define                      NFC_IRQSTAT  0xffc03708   /* NAND Interrupt Status Register */
-#define                      NFC_IRQMASK  0xffc0370c   /* NAND Interrupt Mask Register */
-#define                         NFC_ECC0  0xffc03710   /* NAND ECC Register 0 */
-#define                         NFC_ECC1  0xffc03714   /* NAND ECC Register 1 */
-#define                         NFC_ECC2  0xffc03718   /* NAND ECC Register 2 */
-#define                         NFC_ECC3  0xffc0371c   /* NAND ECC Register 3 */
-#define                        NFC_COUNT  0xffc03720   /* NAND ECC Count Register */
-#define                          NFC_RST  0xffc03724   /* NAND ECC Reset Register */
-#define                        NFC_PGCTL  0xffc03728   /* NAND Page Control Register */
-#define                         NFC_READ  0xffc0372c   /* NAND Read Data Register */
-#define                         NFC_ADDR  0xffc03740   /* NAND Address Register */
-#define                          NFC_CMD  0xffc03744   /* NAND Command Register */
-#define                      NFC_DATA_WR  0xffc03748   /* NAND Data Write Register */
-#define                      NFC_DATA_RD  0xffc0374c   /* NAND Data Read Register */
-
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for HOST_CONTROL */
-
-#define                   HOST_CNTR_HOST_EN  0x1        /* Host Enable */
-#define                  HOST_CNTR_nHOST_EN  0x0
-#define                  HOST_CNTR_HOST_END  0x2        /* Host Endianess */
-#define                 HOST_CNTR_nHOST_END  0x0
-#define                 HOST_CNTR_DATA_SIZE  0x4        /* Data Size */
-#define                HOST_CNTR_nDATA_SIZE  0x0
-#define                  HOST_CNTR_HOST_RST  0x8        /* Host Reset */
-#define                 HOST_CNTR_nHOST_RST  0x0
-#define                  HOST_CNTR_HRDY_OVR  0x20       /* Host Ready Override */
-#define                 HOST_CNTR_nHRDY_OVR  0x0
-#define                  HOST_CNTR_INT_MODE  0x40       /* Interrupt Mode */
-#define                 HOST_CNTR_nINT_MODE  0x0
-#define                     HOST_CNTR_BT_EN  0x80       /* Bus Timeout Enable */
-#define                   HOST_CNTR_ nBT_EN  0x0
-#define                       HOST_CNTR_EHW  0x100      /* Enable Host Write */
-#define                      HOST_CNTR_nEHW  0x0
-#define                       HOST_CNTR_EHR  0x200      /* Enable Host Read */
-#define                      HOST_CNTR_nEHR  0x0
-#define                       HOST_CNTR_BDR  0x400      /* Burst DMA Requests */
-#define                      HOST_CNTR_nBDR  0x0
-
-/* Bit masks for HOST_STATUS */
-
-#define                     HOST_STAT_READY  0x1        /* DMA Ready */
-#define                    HOST_STAT_nREADY  0x0
-#define                  HOST_STAT_FIFOFULL  0x2        /* FIFO Full */
-#define                 HOST_STAT_nFIFOFULL  0x0
-#define                 HOST_STAT_FIFOEMPTY  0x4        /* FIFO Empty */
-#define                HOST_STAT_nFIFOEMPTY  0x0
-#define                  HOST_STAT_COMPLETE  0x8        /* DMA Complete */
-#define                 HOST_STAT_nCOMPLETE  0x0
-#define                      HOST_STAT_HSHK  0x10       /* Host Handshake */
-#define                     HOST_STAT_nHSHK  0x0
-#define                   HOST_STAT_TIMEOUT  0x20       /* Host Timeout */
-#define                  HOST_STAT_nTIMEOUT  0x0
-#define                      HOST_STAT_HIRQ  0x40       /* Host Interrupt Request */
-#define                     HOST_STAT_nHIRQ  0x0
-#define                HOST_STAT_ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               HOST_STAT_nALLOW_CNFG  0x0
-#define                   HOST_STAT_DMA_DIR  0x100      /* DMA Direction */
-#define                  HOST_STAT_nDMA_DIR  0x0
-#define                       HOST_STAT_BTE  0x200      /* Bus Timeout Enabled */
-#define                      HOST_STAT_nBTE  0x0
-#define               HOST_STAT_HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
-#define              HOST_STAT_nHOSTRD_DONE  0x0
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
-
-/* Bit masks for SECURE_SYSSWT */
-
-#define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0
-#define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0
-#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
-#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
-#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
-#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0
-#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0
-#define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0
-#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0
-#define                    L2DABL  0x70000    /* L2 Memory Disable. */
-
-/* Bit masks for SECURE_CONTROL */
-
-#define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0
-#define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0
-#define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0
-#define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0
-
-/* Bit masks for SECURE_STATUS */
-
-#define                   SECMODE  0x3        /* Secured Mode Control State */
-#define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0
-#define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0
-#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0
-#define                   SECSTAT  0xe0       /* Secure Status */
-
-#endif /* _DEF_BF522_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
deleted file mode 100644
index 591e00ff620a..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ /dev/null
@@ -1,678 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the Clear BSD license or the GPL-2 (or later)
- */
-
-#ifndef _DEF_BF525_H
-#define _DEF_BF525_H
-
-/* BF525 is BF522 + USB */
-#include "defBF522.h"
-
-/* USB Control Registers */
-
-#define                        USB_FADDR  0xffc03800   /* Function address register */
-#define                        USB_POWER  0xffc03804   /* Power management register */
-#define                       USB_INTRTX  0xffc03808   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define                       USB_INTRRX  0xffc0380c   /* Interrupt register for Rx endpoints 1 to 7 */
-#define                      USB_INTRTXE  0xffc03810   /* Interrupt enable register for IntrTx */
-#define                      USB_INTRRXE  0xffc03814   /* Interrupt enable register for IntrRx */
-#define                      USB_INTRUSB  0xffc03818   /* Interrupt register for common USB interrupts */
-#define                     USB_INTRUSBE  0xffc0381c   /* Interrupt enable register for IntrUSB */
-#define                        USB_FRAME  0xffc03820   /* USB frame number */
-#define                        USB_INDEX  0xffc03824   /* Index register for selecting the indexed endpoint registers */
-#define                     USB_TESTMODE  0xffc03828   /* Enabled USB 20 test modes */
-#define                     USB_GLOBINTR  0xffc0382c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define                   USB_GLOBAL_CTL  0xffc03830   /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define                USB_TX_MAX_PACKET  0xffc03840   /* Maximum packet size for Host Tx endpoint */
-#define                         USB_CSR0  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                        USB_TXCSR  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                USB_RX_MAX_PACKET  0xffc03848   /* Maximum packet size for Host Rx endpoint */
-#define                        USB_RXCSR  0xffc0384c   /* Control Status register for Host Rx endpoint */
-#define                       USB_COUNT0  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                      USB_RXCOUNT  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                       USB_TXTYPE  0xffc03854   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define                    USB_NAKLIMIT0  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                   USB_TXINTERVAL  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                       USB_RXTYPE  0xffc0385c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define                   USB_RXINTERVAL  0xffc03860   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define                      USB_TXCOUNT  0xffc03868   /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define                     USB_EP0_FIFO  0xffc03880   /* Endpoint 0 FIFO */
-#define                     USB_EP1_FIFO  0xffc03888   /* Endpoint 1 FIFO */
-#define                     USB_EP2_FIFO  0xffc03890   /* Endpoint 2 FIFO */
-#define                     USB_EP3_FIFO  0xffc03898   /* Endpoint 3 FIFO */
-#define                     USB_EP4_FIFO  0xffc038a0   /* Endpoint 4 FIFO */
-#define                     USB_EP5_FIFO  0xffc038a8   /* Endpoint 5 FIFO */
-#define                     USB_EP6_FIFO  0xffc038b0   /* Endpoint 6 FIFO */
-#define                     USB_EP7_FIFO  0xffc038b8   /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define                  USB_OTG_DEV_CTL  0xffc03900   /* OTG Device Control Register */
-#define                 USB_OTG_VBUS_IRQ  0xffc03904   /* OTG VBUS Control Interrupts */
-#define                USB_OTG_VBUS_MASK  0xffc03908   /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define                     USB_LINKINFO  0xffc03948   /* Enables programming of some PHY-side delays */
-#define                        USB_VPLEN  0xffc0394c   /* Determines duration of VBUS pulse for VBUS charging */
-#define                      USB_HS_EOF1  0xffc03950   /* Time buffer for High-Speed transactions */
-#define                      USB_FS_EOF1  0xffc03954   /* Time buffer for Full-Speed transactions */
-#define                      USB_LS_EOF1  0xffc03958   /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define                   USB_APHY_CNTRL  0xffc039e0   /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define                   USB_APHY_CALIB  0xffc039e4   /* Register used to set some calibration values */
-
-#define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-#define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
-#define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define                USB_EP_NI0_TXMAXP  0xffc03a00   /* Maximum packet size for Host Tx endpoint0 */
-#define                 USB_EP_NI0_TXCSR  0xffc03a04   /* Control Status register for endpoint 0 */
-#define                USB_EP_NI0_RXMAXP  0xffc03a08   /* Maximum packet size for Host Rx endpoint0 */
-#define                 USB_EP_NI0_RXCSR  0xffc03a0c   /* Control Status register for Host Rx endpoint0 */
-#define               USB_EP_NI0_RXCOUNT  0xffc03a10   /* Number of bytes received in endpoint 0 FIFO */
-#define                USB_EP_NI0_TXTYPE  0xffc03a14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define            USB_EP_NI0_TXINTERVAL  0xffc03a18   /* Sets the NAK response timeout on Endpoint 0 */
-#define                USB_EP_NI0_RXTYPE  0xffc03a1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define            USB_EP_NI0_RXINTERVAL  0xffc03a20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-#define               USB_EP_NI0_TXCOUNT  0xffc03a28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
-
-/* USB Endpoint 1 Control Registers */
-
-#define                USB_EP_NI1_TXMAXP  0xffc03a40   /* Maximum packet size for Host Tx endpoint1 */
-#define                 USB_EP_NI1_TXCSR  0xffc03a44   /* Control Status register for endpoint1 */
-#define                USB_EP_NI1_RXMAXP  0xffc03a48   /* Maximum packet size for Host Rx endpoint1 */
-#define                 USB_EP_NI1_RXCSR  0xffc03a4c   /* Control Status register for Host Rx endpoint1 */
-#define               USB_EP_NI1_RXCOUNT  0xffc03a50   /* Number of bytes received in endpoint1 FIFO */
-#define                USB_EP_NI1_TXTYPE  0xffc03a54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define            USB_EP_NI1_TXINTERVAL  0xffc03a58   /* Sets the NAK response timeout on Endpoint1 */
-#define                USB_EP_NI1_RXTYPE  0xffc03a5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define            USB_EP_NI1_RXINTERVAL  0xffc03a60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-#define               USB_EP_NI1_TXCOUNT  0xffc03a68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-
-/* USB Endpoint 2 Control Registers */
-
-#define                USB_EP_NI2_TXMAXP  0xffc03a80   /* Maximum packet size for Host Tx endpoint2 */
-#define                 USB_EP_NI2_TXCSR  0xffc03a84   /* Control Status register for endpoint2 */
-#define                USB_EP_NI2_RXMAXP  0xffc03a88   /* Maximum packet size for Host Rx endpoint2 */
-#define                 USB_EP_NI2_RXCSR  0xffc03a8c   /* Control Status register for Host Rx endpoint2 */
-#define               USB_EP_NI2_RXCOUNT  0xffc03a90   /* Number of bytes received in endpoint2 FIFO */
-#define                USB_EP_NI2_TXTYPE  0xffc03a94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define            USB_EP_NI2_TXINTERVAL  0xffc03a98   /* Sets the NAK response timeout on Endpoint2 */
-#define                USB_EP_NI2_RXTYPE  0xffc03a9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define            USB_EP_NI2_RXINTERVAL  0xffc03aa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-#define               USB_EP_NI2_TXCOUNT  0xffc03aa8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
-
-/* USB Endpoint 3 Control Registers */
-
-#define                USB_EP_NI3_TXMAXP  0xffc03ac0   /* Maximum packet size for Host Tx endpoint3 */
-#define                 USB_EP_NI3_TXCSR  0xffc03ac4   /* Control Status register for endpoint3 */
-#define                USB_EP_NI3_RXMAXP  0xffc03ac8   /* Maximum packet size for Host Rx endpoint3 */
-#define                 USB_EP_NI3_RXCSR  0xffc03acc   /* Control Status register for Host Rx endpoint3 */
-#define               USB_EP_NI3_RXCOUNT  0xffc03ad0   /* Number of bytes received in endpoint3 FIFO */
-#define                USB_EP_NI3_TXTYPE  0xffc03ad4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define            USB_EP_NI3_TXINTERVAL  0xffc03ad8   /* Sets the NAK response timeout on Endpoint3 */
-#define                USB_EP_NI3_RXTYPE  0xffc03adc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define            USB_EP_NI3_RXINTERVAL  0xffc03ae0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-#define               USB_EP_NI3_TXCOUNT  0xffc03ae8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-
-/* USB Endpoint 4 Control Registers */
-
-#define                USB_EP_NI4_TXMAXP  0xffc03b00   /* Maximum packet size for Host Tx endpoint4 */
-#define                 USB_EP_NI4_TXCSR  0xffc03b04   /* Control Status register for endpoint4 */
-#define                USB_EP_NI4_RXMAXP  0xffc03b08   /* Maximum packet size for Host Rx endpoint4 */
-#define                 USB_EP_NI4_RXCSR  0xffc03b0c   /* Control Status register for Host Rx endpoint4 */
-#define               USB_EP_NI4_RXCOUNT  0xffc03b10   /* Number of bytes received in endpoint4 FIFO */
-#define                USB_EP_NI4_TXTYPE  0xffc03b14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define            USB_EP_NI4_TXINTERVAL  0xffc03b18   /* Sets the NAK response timeout on Endpoint4 */
-#define                USB_EP_NI4_RXTYPE  0xffc03b1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define            USB_EP_NI4_RXINTERVAL  0xffc03b20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-#define               USB_EP_NI4_TXCOUNT  0xffc03b28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
-
-/* USB Endpoint 5 Control Registers */
-
-#define                USB_EP_NI5_TXMAXP  0xffc03b40   /* Maximum packet size for Host Tx endpoint5 */
-#define                 USB_EP_NI5_TXCSR  0xffc03b44   /* Control Status register for endpoint5 */
-#define                USB_EP_NI5_RXMAXP  0xffc03b48   /* Maximum packet size for Host Rx endpoint5 */
-#define                 USB_EP_NI5_RXCSR  0xffc03b4c   /* Control Status register for Host Rx endpoint5 */
-#define               USB_EP_NI5_RXCOUNT  0xffc03b50   /* Number of bytes received in endpoint5 FIFO */
-#define                USB_EP_NI5_TXTYPE  0xffc03b54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define            USB_EP_NI5_TXINTERVAL  0xffc03b58   /* Sets the NAK response timeout on Endpoint5 */
-#define                USB_EP_NI5_RXTYPE  0xffc03b5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define            USB_EP_NI5_RXINTERVAL  0xffc03b60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-#define               USB_EP_NI5_TXCOUNT  0xffc03b68   /* Number of bytes to be written to the endpoint5 Tx FIFO */
-
-/* USB Endpoint 6 Control Registers */
-
-#define                USB_EP_NI6_TXMAXP  0xffc03b80   /* Maximum packet size for Host Tx endpoint6 */
-#define                 USB_EP_NI6_TXCSR  0xffc03b84   /* Control Status register for endpoint6 */
-#define                USB_EP_NI6_RXMAXP  0xffc03b88   /* Maximum packet size for Host Rx endpoint6 */
-#define                 USB_EP_NI6_RXCSR  0xffc03b8c   /* Control Status register for Host Rx endpoint6 */
-#define               USB_EP_NI6_RXCOUNT  0xffc03b90   /* Number of bytes received in endpoint6 FIFO */
-#define                USB_EP_NI6_TXTYPE  0xffc03b94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define            USB_EP_NI6_TXINTERVAL  0xffc03b98   /* Sets the NAK response timeout on Endpoint6 */
-#define                USB_EP_NI6_RXTYPE  0xffc03b9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define            USB_EP_NI6_RXINTERVAL  0xffc03ba0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-#define               USB_EP_NI6_TXCOUNT  0xffc03ba8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
-
-/* USB Endpoint 7 Control Registers */
-
-#define                USB_EP_NI7_TXMAXP  0xffc03bc0   /* Maximum packet size for Host Tx endpoint7 */
-#define                 USB_EP_NI7_TXCSR  0xffc03bc4   /* Control Status register for endpoint7 */
-#define                USB_EP_NI7_RXMAXP  0xffc03bc8   /* Maximum packet size for Host Rx endpoint7 */
-#define                 USB_EP_NI7_RXCSR  0xffc03bcc   /* Control Status register for Host Rx endpoint7 */
-#define               USB_EP_NI7_RXCOUNT  0xffc03bd0   /* Number of bytes received in endpoint7 FIFO */
-#define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
-#define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03be0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03be8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
-
-#define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define                  USB_DMA0CONTROL  0xffc03c04   /* DMA master channel 0 configuration */
-#define                  USB_DMA0ADDRLOW  0xffc03c08   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0ADDRHIGH  0xffc03c0c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0COUNTLOW  0xffc03c10   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define                USB_DMA0COUNTHIGH  0xffc03c14   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define                  USB_DMA1CONTROL  0xffc03c24   /* DMA master channel 1 configuration */
-#define                  USB_DMA1ADDRLOW  0xffc03c28   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1ADDRHIGH  0xffc03c2c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1COUNTLOW  0xffc03c30   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define                USB_DMA1COUNTHIGH  0xffc03c34   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define                  USB_DMA2CONTROL  0xffc03c44   /* DMA master channel 2 configuration */
-#define                  USB_DMA2ADDRLOW  0xffc03c48   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2ADDRHIGH  0xffc03c4c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2COUNTLOW  0xffc03c50   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define                USB_DMA2COUNTHIGH  0xffc03c54   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define                  USB_DMA3CONTROL  0xffc03c64   /* DMA master channel 3 configuration */
-#define                  USB_DMA3ADDRLOW  0xffc03c68   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3ADDRHIGH  0xffc03c6c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3COUNTLOW  0xffc03c70   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define                USB_DMA3COUNTHIGH  0xffc03c74   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define                  USB_DMA4CONTROL  0xffc03c84   /* DMA master channel 4 configuration */
-#define                  USB_DMA4ADDRLOW  0xffc03c88   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4ADDRHIGH  0xffc03c8c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4COUNTLOW  0xffc03c90   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define                USB_DMA4COUNTHIGH  0xffc03c94   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define                  USB_DMA5CONTROL  0xffc03ca4   /* DMA master channel 5 configuration */
-#define                  USB_DMA5ADDRLOW  0xffc03ca8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5ADDRHIGH  0xffc03cac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5COUNTLOW  0xffc03cb0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define                USB_DMA5COUNTHIGH  0xffc03cb4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define                  USB_DMA6CONTROL  0xffc03cc4   /* DMA master channel 6 configuration */
-#define                  USB_DMA6ADDRLOW  0xffc03cc8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6ADDRHIGH  0xffc03ccc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6COUNTLOW  0xffc03cd0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define                USB_DMA6COUNTHIGH  0xffc03cd4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define                  USB_DMA7CONTROL  0xffc03ce4   /* DMA master channel 7 configuration */
-#define                  USB_DMA7ADDRLOW  0xffc03ce8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7ADDRHIGH  0xffc03cec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7COUNTLOW  0xffc03cf0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define                USB_DMA7COUNTHIGH  0xffc03cf4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Bit masks for USB_FADDR */
-
-#define          FUNCTION_ADDRESS  0x7f       /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
-#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
-#define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
-#define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
-#define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
-#define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
-#define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
-#define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
-
-/* Bit masks for USB_INTRTX */
-
-#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
-#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
-#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
-#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
-#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
-#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
-#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
-#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
-
-/* Bit masks for USB_INTRRX */
-
-#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
-#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
-#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
-#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
-#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
-#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
-#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
-
-/* Bit masks for USB_INTRTXE */
-
-#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
-#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
-#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
-#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
-#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
-#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
-#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
-#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
-
-/* Bit masks for USB_INTRRXE */
-
-#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
-#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
-#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
-#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
-#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
-#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
-#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
-
-/* Bit masks for USB_INTRUSB */
-
-#define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
-#define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
-#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
-#define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
-#define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
-#define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
-#define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
-#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
-
-/* Bit masks for USB_INTRUSBE */
-
-#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
-#define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
-#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
-#define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
-#define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
-#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
-#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
-#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
-
-/* Bit masks for USB_FRAME */
-
-#define              FRAME_NUMBER  0x7ff      /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
-#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
-#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
-#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
-#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
-#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
-#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
-#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
-#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
-#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
-#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
-#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
-#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
-#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
-#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
-#define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
-#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
-#define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
-#define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
-#define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
-#define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
-#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
-#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
-#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
-#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
-#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
-#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
-#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
-#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
-#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
-#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
-#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
-
-/* Bit masks for USB_CSR0 */
-
-#define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
-#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
-#define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
-#define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
-#define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
-#define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
-#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
-#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
-#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
-#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
-#define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
-#define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
-#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
-#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
-#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
-
-/* Bit masks for USB_COUNT0 */
-
-#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
-#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
-#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
-#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
-#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
-#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
-#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
-#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
-#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
-#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
-#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
-#define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
-#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
-#define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
-#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
-#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
-
-/* Bit masks for USB_TXCOUNT */
-
-#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
-#define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
-#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
-#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
-#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
-#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
-#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
-#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
-#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
-#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
-#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
-#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
-#define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
-#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
-#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
-#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
-#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
-#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
-#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
-#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
-
-/* Bit masks for USB_RXCOUNT */
-
-#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define            TARGET_EP_NO_T  0xf        /* EP number */
-#define                PROTOCOL_T  0xc        /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define            TARGET_EP_NO_R  0xf        /* EP number */
-#define                PROTOCOL_R  0xc        /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
-#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
-#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
-#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
-#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
-#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
-#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
-#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
-#define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
-#define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
-#define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
-#define                     EPNUM  0xf0       /* EP number */
-#define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-#endif /* _DEF_BF525_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
deleted file mode 100644
index aeb84795b35e..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- * Copyright 2007-2010 Analog Devices Inc.
- *
- * Licensed under the Clear BSD license or the GPL-2 (or later)
- */
-
-#ifndef _DEF_BF527_H
-#define _DEF_BF527_H
-
-/* BF527 is BF525 + EMAC */
-#include "defBF525.h"
-
-/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
-
-#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
-#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
-#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
-#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
-#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
-#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
-#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
-#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
-#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
-#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
-#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
-#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
-#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
-#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
-#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
-#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
-
-#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
-#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
-#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
-#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
-#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
-#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
-#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
-#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
-
-#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
-#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
-#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
-#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
-#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
-
-#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
-#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
-#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
-#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
-#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
-#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
-#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
-#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
-#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
-#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
-#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
-#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
-#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
-#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
-#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
-#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
-#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
-#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
-#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
-#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
-#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
-#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
-#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
-#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
-
-#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
-#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
-#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
-#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
-#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
-#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
-#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
-#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
-#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
-#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
-#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
-#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
-#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
-#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
-#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
-#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
-#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
-#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
-#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
-#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
-#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
-#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
-#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
-
-/* Listing for IEEE-Supported Count Registers */
-
-#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
-#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
-#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
-#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
-#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
-#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
-#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
-#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
-#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
-#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
-#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
-#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
-#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
-#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
-#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
-#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
-#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
-#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
-#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
-#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
-#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
-#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
-#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
-#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
-
-#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
-#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
-#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
-#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
-#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
-#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
-#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
-#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
-#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
-#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
-#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
-#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
-#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
-#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
-#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
-#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
-#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
-#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
-#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
-#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
-#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
-#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
-#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
-
-/***********************************************************************************
-** System MMR Register Bits And Macros
-**
-** Disclaimer:	All macros are intended to make C and Assembly code more readable.
-**				Use these macros carefully, as any that do left shifts for field
-**				depositing will result in the lower order bits being destroyed.  Any
-**				macro that shifts left to properly position the bit-field should be
-**				used as part of an OR to initialize a register and NOT as a dynamic
-**				modifier UNLESS the lower order bits are saved and ORed back in when
-**				the macro is used.
-*************************************************************************************/
-
-/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
-
-/* EMAC_OPMODE Masks */
-
-#define	RE                 0x00000001     /* Receiver Enable                                    */
-#define	ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
-#define	HU                 0x00000010     /* Hash Filter Unicast Address                        */
-#define	HM                 0x00000020     /* Hash Filter Multicast Address                      */
-#define	PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
-#define	PR                 0x00000080     /* Promiscuous Mode Enable                            */
-#define	IFE                0x00000100     /* Inverse Filtering Enable                           */
-#define	DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
-#define	PBF                0x00000400     /* Pass Bad Frames Enable                             */
-#define	PSF                0x00000800     /* Pass Short Frames Enable                           */
-#define	RAF                0x00001000     /* Receive-All Mode                                   */
-#define	TE                 0x00010000     /* Transmitter Enable                                 */
-#define	DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
-#define	DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
-#define	DC                 0x00080000     /* Deferral Check                                     */
-#define	BOLMT              0x00300000     /* Back-Off Limit                                     */
-#define	BOLMT_10           0x00000000     /*		10-bit range                            */
-#define	BOLMT_8            0x00100000     /*		8-bit range                             */
-#define	BOLMT_4            0x00200000     /*		4-bit range                             */
-#define	BOLMT_1            0x00300000     /*		1-bit range                             */
-#define	DRTY               0x00400000     /* Disable TX Retry On Collision                      */
-#define	LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
-#define	RMII               0x01000000     /* RMII/MII* Mode                                     */
-#define	RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
-#define	FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
-#define	LB                 0x08000000     /* Internal Loopback Enable                           */
-#define	DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
-
-/* EMAC_STAADD Masks */
-
-#define	STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
-#define	STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
-#define	STADISPRE          0x00000004     /* Disable Preamble Generation                        */
-#define	STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
-#define	REGAD              0x000007C0     /* STA Register Address                               */
-#define	PHYAD              0x0000F800     /* PHY Device Address                                 */
-
-#define	SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
-#define	SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
-
-/* EMAC_STADAT Mask */
-
-#define	STADATA            0x0000FFFF     /* Station Management Data                            */
-
-/* EMAC_FLC Masks */
-
-#define	FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
-#define	FLCE               0x00000002     /* Flow Control Enable                                */
-#define	PCF                0x00000004     /* Pass Control Frames                                */
-#define	BKPRSEN            0x00000008     /* Enable Backpressure                                */
-#define	FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
-
-#define	SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
-
-/* EMAC_WKUP_CTL Masks */
-
-#define	CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
-#define	MPKE               0x00000002    /* Magic Packet Enable                                 */
-#define	RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
-#define	GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
-#define	MPKS               0x00000020    /* Magic Packet Received Status                        */
-#define	RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
-
-/* EMAC_WKUP_FFCMD Masks */
-
-#define	WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
-#define	WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
-#define	WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
-#define	WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
-#define	WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
-#define	WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
-#define	WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
-#define	WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
-
-/* EMAC_WKUP_FFOFF Masks */
-
-#define	WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
-#define	WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
-#define	WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
-#define	WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
-
-#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
-#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
-#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
-#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
-/* Set ALL Offsets */
-#define	SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
-
-/* EMAC_WKUP_FFCRC0 Masks */
-
-#define	WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
-#define	WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
-
-#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
-#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
-
-/* EMAC_WKUP_FFCRC1 Masks */
-
-#define	WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
-#define	WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
-
-#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
-#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
-
-/* EMAC_SYSCTL Masks */
-
-#define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
-#define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
-#define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
-#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
-#define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
-
-#define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
-
-/* EMAC_SYSTAT Masks */
-
-#define	PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
-#define	MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
-#define	RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
-#define	TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
-#define	WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
-#define	RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
-#define	TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
-#define	STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
-
-/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
-
-#define	RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
-#define	RX_COMP           0x00001000    /* RX Frame Complete                                      */
-#define	RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
-#define	RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
-#define	RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
-#define	RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
-#define	RX_LEN            0x00020000    /* RX Frame Length Error                                  */
-#define	RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
-#define	RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
-#define	RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
-#define	RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
-#define	RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
-#define	RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
-#define	RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
-#define	RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
-#define	RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
-#define	RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
-#define	RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
-#define	RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
-#define	RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
-#define	RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
-
-/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
-
-#define	TX_COMP           0x00000001    /* TX Frame Complete                                      */
-#define	TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
-#define	TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
-#define	TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
-#define	TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
-#define	TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
-#define	TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
-#define	TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
-#define	TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
-#define	TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
-#define	TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
-#define	TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
-#define	TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
-#define	TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
-#define	TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
-
-/* EMAC_MMC_CTL Masks */
-#define	RSTC              0x00000001    /* Reset All Counters                                     */
-#define	CROLL             0x00000002    /* Counter Roll-Over Enable                               */
-#define	CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
-#define	MMCE              0x00000008    /* Enable MMC Counter Operation                           */
-
-/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
-#define	RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
-#define	RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
-#define	RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
-#define	RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
-#define	RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
-#define	RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
-#define	RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
-#define	RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
-#define	RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
-#define	RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
-#define	RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
-#define	RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
-#define	RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
-#define	RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
-#define	RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
-#define	RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
-#define	RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
-#define	RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
-#define	RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
-#define	RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
-#define	RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
-#define	RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
-#define	RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
-#define	RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
-
-/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
-
-#define	TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
-#define	TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
-#define	TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
-#define	TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
-#define	TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
-#define	TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
-#define	TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
-#define	TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
-#define	TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
-#define	TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
-#define	TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
-#define	TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
-#define	TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
-#define	TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
-#define	TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
-#define	TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
-#define	TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
-#define	TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
-#define	TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
-#define	TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
-#define	TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
-#define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
-#define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
-
-#endif /* _DEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
deleted file mode 100644
index eb287da101a2..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/dma.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* mach/dma.h - arch-specific DMA defines
- *
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _MACH_DMA_H_
-#define _MACH_DMA_H_
-
-#define MAX_DMA_CHANNELS 16
-
-#define CH_PPI 			0	/* PPI receive/transmit or NFC */
-#define CH_EMAC_RX 		1	/* Ethernet MAC receive or HOSTDP */
-#define CH_EMAC_HOSTDP 		1	/* Ethernet MAC receive or HOSTDP */
-#define CH_EMAC_TX 		2	/* Ethernet MAC transmit or NFC */
-#define CH_SPORT0_RX 		3	/* SPORT0 receive */
-#define CH_SPORT0_TX 		4	/* SPORT0 transmit */
-#define CH_SPORT1_RX 		5	/* SPORT1 receive */
-#define CH_SPORT1_TX 		6	/* SPORT1 transmit */
-#define CH_SPI 			7	/* SPI transmit/receive */
-#define CH_UART0_RX 		8	/* UART0 receive */
-#define CH_UART0_TX 		9	/* UART0 transmit */
-#define CH_UART1_RX 		10	/* UART1 receive */
-#define CH_UART1_TX 		11	/* UART1 transmit */
-
-#define CH_MEM_STREAM0_DEST	12	/* TX */
-#define CH_MEM_STREAM0_SRC  	13	/* RX */
-#define CH_MEM_STREAM1_DEST	14	/* TX */
-#define CH_MEM_STREAM1_SRC 	15	/* RX */
-
-#if defined(CONFIG_BF527_NAND_D_PORTF)
-#define CH_NFC			CH_PPI	/* PPI receive/transmit or NFC */
-#elif defined(CONFIG_BF527_NAND_D_PORTH)
-#define CH_NFC			CH_EMAC_TX /* PPI receive/transmit or NFC */
-#endif
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
deleted file mode 100644
index fba606b699c3..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/gpio.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2008 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-
-#ifndef _MACH_GPIO_H_
-#define _MACH_GPIO_H_
-
-#define MAX_BLACKFIN_GPIOS 48
-
-#define GPIO_PF0	0
-#define GPIO_PF1	1
-#define GPIO_PF2	2
-#define GPIO_PF3	3
-#define GPIO_PF4	4
-#define GPIO_PF5	5
-#define GPIO_PF6	6
-#define GPIO_PF7	7
-#define GPIO_PF8	8
-#define GPIO_PF9	9
-#define GPIO_PF10	10
-#define GPIO_PF11	11
-#define GPIO_PF12	12
-#define GPIO_PF13	13
-#define GPIO_PF14	14
-#define GPIO_PF15	15
-#define GPIO_PG0	16
-#define GPIO_PG1	17
-#define GPIO_PG2	18
-#define GPIO_PG3	19
-#define GPIO_PG4	20
-#define GPIO_PG5	21
-#define GPIO_PG6	22
-#define GPIO_PG7	23
-#define GPIO_PG8	24
-#define GPIO_PG9	25
-#define GPIO_PG10	26
-#define GPIO_PG11	27
-#define GPIO_PG12	28
-#define GPIO_PG13	29
-#define GPIO_PG14	30
-#define GPIO_PG15	31
-#define GPIO_PH0	32
-#define GPIO_PH1	33
-#define GPIO_PH2	34
-#define GPIO_PH3	35
-#define GPIO_PH4	36
-#define GPIO_PH5	37
-#define GPIO_PH6	38
-#define GPIO_PH7	39
-#define GPIO_PH8	40
-#define GPIO_PH9	41
-#define GPIO_PH10	42
-#define GPIO_PH11	43
-#define GPIO_PH12	44
-#define GPIO_PH13	45
-#define GPIO_PH14	46
-#define GPIO_PH15	47
-
-#define PORT_F GPIO_PF0
-#define PORT_G GPIO_PG0
-#define PORT_H GPIO_PH0
-
-#include <mach-common/ports-f.h>
-#include <mach-common/ports-g.h>
-#include <mach-common/ports-h.h>
-
-#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
deleted file mode 100644
index ed7310ff819b..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _BF527_IRQ_H_
-#define _BF527_IRQ_H_
-
-#include <mach-common/irq.h>
-
-#define NR_PERI_INTS		(2 * 32)
-
-#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
-#define IRQ_DMA0_ERROR		BFIN_IRQ(1)	/* DMA Error 0 (generic) */
-#define IRQ_DMAR0_BLK		BFIN_IRQ(2)	/* DMAR0 Block Interrupt */
-#define IRQ_DMAR1_BLK		BFIN_IRQ(3)	/* DMAR1 Block Interrupt */
-#define IRQ_DMAR0_OVR		BFIN_IRQ(4)	/* DMAR0 Overflow Error */
-#define IRQ_DMAR1_OVR		BFIN_IRQ(5)	/* DMAR1 Overflow Error */
-#define IRQ_PPI_ERROR		BFIN_IRQ(6)	/* PPI Error */
-#define IRQ_MAC_ERROR		BFIN_IRQ(7)	/* MAC Status */
-#define IRQ_SPORT0_ERROR	BFIN_IRQ(8)	/* SPORT0 Status */
-#define IRQ_SPORT1_ERROR	BFIN_IRQ(9)	/* SPORT1 Status */
-#define IRQ_UART0_ERROR		BFIN_IRQ(12)	/* UART0 Status */
-#define IRQ_UART1_ERROR		BFIN_IRQ(13)	/* UART1 Status */
-#define IRQ_RTC			BFIN_IRQ(14)	/* RTC */
-#define IRQ_PPI			BFIN_IRQ(15)	/* DMA Channel 0 (PPI/NAND) */
-#define IRQ_SPORT0_RX		BFIN_IRQ(16)	/* DMA 3 Channel (SPORT0 RX) */
-#define IRQ_SPORT0_TX		BFIN_IRQ(17)	/* DMA 4 Channel (SPORT0 TX) */
-#define IRQ_SPORT1_RX		BFIN_IRQ(18)	/* DMA 5 Channel (SPORT1 RX) */
-#define IRQ_SPORT1_TX		BFIN_IRQ(19)	/* DMA 6 Channel (SPORT1 TX) */
-#define IRQ_TWI			BFIN_IRQ(20)	/* TWI */
-#define IRQ_SPI			BFIN_IRQ(21)	/* DMA 7 Channel (SPI) */
-#define IRQ_UART0_RX		BFIN_IRQ(22)	/* DMA8 Channel (UART0 RX) */
-#define IRQ_UART0_TX		BFIN_IRQ(23)	/* DMA9 Channel (UART0 TX) */
-#define IRQ_UART1_RX		BFIN_IRQ(24)	/* DMA10 Channel (UART1 RX) */
-#define IRQ_UART1_TX		BFIN_IRQ(25)	/* DMA11 Channel (UART1 TX) */
-#define IRQ_OPTSEC		BFIN_IRQ(26)	/* OTPSEC Interrupt */
-#define IRQ_CNT			BFIN_IRQ(27)	/* GP Counter */
-#define IRQ_MAC_RX		BFIN_IRQ(28)	/* DMA1 Channel (MAC RX/HDMA) */
-#define IRQ_PORTH_INTA		BFIN_IRQ(29)	/* Port H Interrupt A */
-#define IRQ_MAC_TX		BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
-#define IRQ_NFC			BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
-#define IRQ_PORTH_INTB		BFIN_IRQ(31)	/* Port H Interrupt B */
-#define IRQ_TIMER0		BFIN_IRQ(32)	/* Timer 0 */
-#define IRQ_TIMER1		BFIN_IRQ(33)	/* Timer 1 */
-#define IRQ_TIMER2		BFIN_IRQ(34)	/* Timer 2 */
-#define IRQ_TIMER3		BFIN_IRQ(35)	/* Timer 3 */
-#define IRQ_TIMER4		BFIN_IRQ(36)	/* Timer 4 */
-#define IRQ_TIMER5		BFIN_IRQ(37)	/* Timer 5 */
-#define IRQ_TIMER6		BFIN_IRQ(38)	/* Timer 6 */
-#define IRQ_TIMER7		BFIN_IRQ(39)	/* Timer 7 */
-#define IRQ_PORTG_INTA		BFIN_IRQ(40)	/* Port G Interrupt A */
-#define IRQ_PORTG_INTB		BFIN_IRQ(41)	/* Port G Interrupt B */
-#define IRQ_MEM_DMA0		BFIN_IRQ(42)	/* MDMA Stream 0 */
-#define IRQ_MEM_DMA1		BFIN_IRQ(43)	/* MDMA Stream 1 */
-#define IRQ_WATCH		BFIN_IRQ(44)	/* Software Watchdog Timer */
-#define IRQ_PORTF_INTA		BFIN_IRQ(45)	/* Port F Interrupt A */
-#define IRQ_PORTF_INTB		BFIN_IRQ(46)	/* Port F Interrupt B */
-#define IRQ_SPI_ERROR		BFIN_IRQ(47)	/* SPI Status */
-#define IRQ_NFC_ERROR		BFIN_IRQ(48)	/* NAND Error */
-#define IRQ_HDMA_ERROR		BFIN_IRQ(49)	/* HDMA Error */
-#define IRQ_HDMA		BFIN_IRQ(50)	/* HDMA (TFI) */
-#define IRQ_USB_EINT		BFIN_IRQ(51)	/* USB_EINT Interrupt */
-#define IRQ_USB_INT0		BFIN_IRQ(52)	/* USB_INT0 Interrupt */
-#define IRQ_USB_INT1		BFIN_IRQ(53)	/* USB_INT1 Interrupt */
-#define IRQ_USB_INT2		BFIN_IRQ(54)	/* USB_INT2 Interrupt */
-#define IRQ_USB_DMA		BFIN_IRQ(55)	/* USB_DMAINT Interrupt */
-
-#define SYS_IRQS		BFIN_IRQ(63)	/* 70 */
-
-#define IRQ_PF0			71
-#define IRQ_PF1			72
-#define IRQ_PF2			73
-#define IRQ_PF3			74
-#define IRQ_PF4			75
-#define IRQ_PF5			76
-#define IRQ_PF6			77
-#define IRQ_PF7			78
-#define IRQ_PF8			79
-#define IRQ_PF9			80
-#define IRQ_PF10		81
-#define IRQ_PF11		82
-#define IRQ_PF12		83
-#define IRQ_PF13		84
-#define IRQ_PF14		85
-#define IRQ_PF15		86
-
-#define IRQ_PG0			87
-#define IRQ_PG1			88
-#define IRQ_PG2			89
-#define IRQ_PG3			90
-#define IRQ_PG4			91
-#define IRQ_PG5			92
-#define IRQ_PG6			93
-#define IRQ_PG7			94
-#define IRQ_PG8			95
-#define IRQ_PG9			96
-#define IRQ_PG10		97
-#define IRQ_PG11		98
-#define IRQ_PG12		99
-#define IRQ_PG13		100
-#define IRQ_PG14		101
-#define IRQ_PG15		102
-
-#define IRQ_PH0			103
-#define IRQ_PH1			104
-#define IRQ_PH2			105
-#define IRQ_PH3			106
-#define IRQ_PH4			107
-#define IRQ_PH5			108
-#define IRQ_PH6			109
-#define IRQ_PH7			110
-#define IRQ_PH8			111
-#define IRQ_PH9			112
-#define IRQ_PH10		113
-#define IRQ_PH11		114
-#define IRQ_PH12		115
-#define IRQ_PH13		116
-#define IRQ_PH14		117
-#define IRQ_PH15		118
-
-#define GPIO_IRQ_BASE		IRQ_PF0
-
-#define IRQ_MAC_PHYINT		119	/* PHY_INT Interrupt */
-#define IRQ_MAC_MMCINT		120	/* MMC Counter Interrupt */
-#define IRQ_MAC_RXFSINT		121	/* RX Frame-Status Interrupt */
-#define IRQ_MAC_TXFSINT		122	/* TX Frame-Status Interrupt */
-#define IRQ_MAC_WAKEDET		123	/* Wake-Up Interrupt */
-#define IRQ_MAC_RXDMAERR	124	/* RX DMA Direction Error Interrupt */
-#define IRQ_MAC_TXDMAERR	125	/* TX DMA Direction Error Interrupt */
-#define IRQ_MAC_STMDONE		126	/* Station Mgt. Transfer Done Interrupt */
-
-#define NR_MACH_IRQS		(IRQ_MAC_STMDONE + 1)
-
-/* IAR0 BIT FIELDS */
-#define IRQ_PLL_WAKEUP_POS	0
-#define IRQ_DMA0_ERROR_POS	4
-#define IRQ_DMAR0_BLK_POS	8
-#define IRQ_DMAR1_BLK_POS	12
-#define IRQ_DMAR0_OVR_POS	16
-#define IRQ_DMAR1_OVR_POS	20
-#define IRQ_PPI_ERROR_POS	24
-#define IRQ_MAC_ERROR_POS	28
-
-/* IAR1 BIT FIELDS */
-#define IRQ_SPORT0_ERROR_POS	0
-#define IRQ_SPORT1_ERROR_POS	4
-#define IRQ_UART0_ERROR_POS	16
-#define IRQ_UART1_ERROR_POS	20
-#define IRQ_RTC_POS		24
-#define IRQ_PPI_POS		28
-
-/* IAR2 BIT FIELDS */
-#define IRQ_SPORT0_RX_POS	0
-#define IRQ_SPORT0_TX_POS	4
-#define IRQ_SPORT1_RX_POS	8
-#define IRQ_SPORT1_TX_POS	12
-#define IRQ_TWI_POS		16
-#define IRQ_SPI_POS		20
-#define IRQ_UART0_RX_POS	24
-#define IRQ_UART0_TX_POS	28
-
-/* IAR3 BIT FIELDS */
-#define IRQ_UART1_RX_POS	0
-#define IRQ_UART1_TX_POS	4
-#define IRQ_OPTSEC_POS		8
-#define IRQ_CNT_POS		12
-#define IRQ_MAC_RX_POS		16
-#define IRQ_PORTH_INTA_POS	20
-#define IRQ_MAC_TX_POS		24
-#define IRQ_PORTH_INTB_POS	28
-
-/* IAR4 BIT FIELDS */
-#define IRQ_TIMER0_POS		0
-#define IRQ_TIMER1_POS		4
-#define IRQ_TIMER2_POS		8
-#define IRQ_TIMER3_POS		12
-#define IRQ_TIMER4_POS		16
-#define IRQ_TIMER5_POS		20
-#define IRQ_TIMER6_POS		24
-#define IRQ_TIMER7_POS		28
-
-/* IAR5 BIT FIELDS */
-#define IRQ_PORTG_INTA_POS	0
-#define IRQ_PORTG_INTB_POS	4
-#define IRQ_MEM_DMA0_POS	8
-#define IRQ_MEM_DMA1_POS	12
-#define IRQ_WATCH_POS		16
-#define IRQ_PORTF_INTA_POS	20
-#define IRQ_PORTF_INTB_POS	24
-#define IRQ_SPI_ERROR_POS	28
-
-/* IAR6 BIT FIELDS */
-#define IRQ_NFC_ERROR_POS	0
-#define IRQ_HDMA_ERROR_POS	4
-#define IRQ_HDMA_POS		8
-#define IRQ_USB_EINT_POS	12
-#define IRQ_USB_INT0_POS	16
-#define IRQ_USB_INT1_POS	20
-#define IRQ_USB_INT2_POS	24
-#define IRQ_USB_DMA_POS		28
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
deleted file mode 100644
index d96e894afd2c..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * BF52x memory map
- *
- * Copyright 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_MACH_MEM_MAP_H__
-#define __BFIN_MACH_MEM_MAP_H__
-
-#ifndef __BFIN_MEM_MAP_H__
-# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
-#endif
-
-/* Async Memory Banks */
-#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
-#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
-#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
-#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
-#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
-#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
-
-/* Boot ROM Memory */
-
-#define BOOT_ROM_START		0xEF000000
-#define BOOT_ROM_LENGTH		0x8000
-
-/* Level 1 Memory */
-
-/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */
-
-#ifdef CONFIG_BFIN_ICACHE
-#define BFIN_ICACHESIZE	(16*1024)
-#else
-#define BFIN_ICACHESIZE	(0*1024)
-#endif
-
-#define L1_CODE_START       0xFFA00000
-#define L1_DATA_A_START     0xFF800000
-#define L1_DATA_B_START     0xFF900000
-
-#define L1_CODE_LENGTH      0xC000
-
-#ifdef CONFIG_BFIN_DCACHE
-
-#ifdef CONFIG_BFIN_DCACHE_BANKA
-#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(16*1024)
-#define BFIN_DSUPBANKS	1
-#else
-#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
-#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BFIN_DCACHESIZE	(32*1024)
-#define BFIN_DSUPBANKS	2
-#endif
-
-#else
-#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
-#define L1_DATA_A_LENGTH      0x8000
-#define L1_DATA_B_LENGTH      0x8000
-#define BFIN_DCACHESIZE	(0*1024)
-#define BFIN_DSUPBANKS	0
-#endif				/*CONFIG_BFIN_DCACHE */
-
-#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/pll.h b/arch/blackfin/mach-bf527/include/mach/pll.h
deleted file mode 100644
index 94cca674d835..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/pll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <mach-common/pll.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
deleted file mode 100644
index 08bae421f5c9..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _MACH_PORTMUX_H_
-#define _MACH_PORTMUX_H_
-
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
-
-#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
-#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
-#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
-#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
-#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
-#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
-#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
-#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
-#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
-#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
-#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
-#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
-#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
-#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
-#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
-#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
-
-#if defined(CONFIG_BF527_SPORT0_PORTF)
-#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
-#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
-#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
-#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
-#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
-#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
-#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
-#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
-#elif defined(CONFIG_BF527_SPORT0_PORTG)
-#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
-#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
-#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
-#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
-#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
-#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
-#if defined(CONFIG_BF527_SPORT0_TSCLK_PG10)
-#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
-#elif defined(CONFIG_BF527_SPORT0_TSCLK_PG14)
-#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
-#endif
-#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
-#endif
-
-#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
-#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
-#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
-#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
-#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
-#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
-#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
-#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
-
-#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
-#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
-
-#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
-#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
-
-#if defined(CONFIG_BF527_UART1_PORTF)
-#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
-#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
-#elif defined(CONFIG_BF527_UART1_PORTG)
-#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
-#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
-#endif
-
-#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
-#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
-#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
-
-#define P_HWAIT		(P_DONTCARE)
-
-#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
-#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
-
-#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
-#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
-#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
-#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
-#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
-#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
-#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
-#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
-#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
-#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
-#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
-/* #define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */
-#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
-#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
-#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
-#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
-#define P_MDC		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
-#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
-#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
-
-#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
-#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
-#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
-
-#define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
-#define P_HOST_ACK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
-#define P_HOST_ADDR	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
-#define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
-#define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
-
-#if defined(CONFIG_BF527_NAND_D_PORTF)
-#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
-#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
-#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
-#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
-#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
-#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
-#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
-#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
-#elif defined(CONFIG_BF527_NAND_D_PORTH)
-#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
-#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
-#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
-#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
-#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
-#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
-#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
-#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
-#endif
-
-#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
-#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
-#define P_NAND_CE	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
-#define P_NAND_WE	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
-#define P_NAND_RE	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
-#define P_NAND_RB	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
-#define P_NAND_CLE	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
-#define P_NAND_ALE	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
-
-#define P_HOST_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
-#define P_HOST_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
-#define P_HOST_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
-#define P_HOST_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
-#define P_HOST_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
-#define P_HOST_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2))
-#define P_HOST_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
-#define P_HOST_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
-#define P_HOST_D8	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
-#define P_HOST_D9	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2))
-#define P_HOST_D10	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2))
-#define P_HOST_D11	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2))
-#define P_HOST_D12	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2))
-#define P_HOST_D13	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2))
-#define P_HOST_D14	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2))
-#define P_HOST_D15	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2))
-
-#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
-#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
-#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1))
-#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1))
-#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
-#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
-#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
-#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
-#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1))
-#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1))
-#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1))
-#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1))
-#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1))
-#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
-#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
-#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
-#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
-#define P_MDIO		(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
-
-#define P_TWI0_SCL	(P_DONTCARE)
-#define P_TWI0_SDA	(P_DONTCARE)
-#define P_PPI0_FS1	(P_DONTCARE)
-#define P_TMR0		(P_DONTCARE)
-#define P_TMRCLK	(P_DONTCARE)
-#define P_PPI0_CLK	(P_DONTCARE)
-
-#define P_MII0 {\
-	P_MII0_ETxD0, \
-	P_MII0_ETxD1, \
-	P_MII0_ETxD2, \
-	P_MII0_ETxD3, \
-	P_MII0_ETxEN, \
-	P_MII0_TxCLK, \
-	P_MII0_PHYINT, \
-	P_MII0_COL, \
-	P_MII0_ERxD0, \
-	P_MII0_ERxD1, \
-	P_MII0_ERxD2, \
-	P_MII0_ERxD3, \
-	P_MII0_ERxDV, \
-	P_MII0_ERxCLK, \
-	P_MII0_ERxER, \
-	P_MII0_CRS, \
-	P_MDC, \
-	P_MDIO, 0}
-
-#define P_RMII0 {\
-	P_MII0_ETxD0, \
-	P_MII0_ETxD1, \
-	P_MII0_ETxEN, \
-	P_MII0_ERxD0, \
-	P_MII0_ERxD1, \
-	P_MII0_ERxER, \
-	P_RMII0_REF_CLK, \
-	P_RMII0_MDINT, \
-	P_RMII0_CRS_DV, \
-	P_MDC, \
-	P_MDIO, 0}
-
-#endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
deleted file mode 100644
index 44ca215bf164..000000000000
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Set up the interrupt priorities
- *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <asm/blackfin.h>
-
-void __init program_IAR(void)
-{
-	/* Program the IAR0 Register with the configured priority */
-	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
-			((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) |
-			((CONFIG_IRQ_DMAR0_BLK - 7) << IRQ_DMAR0_BLK_POS) |
-			((CONFIG_IRQ_DMAR1_BLK - 7) << IRQ_DMAR1_BLK_POS) |
-			((CONFIG_IRQ_DMAR0_OVR - 7) << IRQ_DMAR0_OVR_POS) |
-			((CONFIG_IRQ_DMAR1_OVR - 7) << IRQ_DMAR1_OVR_POS) |
-			((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) |
-			((CONFIG_IRQ_MAC_ERROR - 7) << IRQ_MAC_ERROR_POS));
-
-
-	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
-			((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) |
-			((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) |
-			((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) |
-			((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
-			((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS));
-
-	bfin_write_SIC_IAR2(((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
-			((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
-			((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
-			((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
-			((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
-			((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
-			((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
-			((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
-
-	bfin_write_SIC_IAR3(((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
-			((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
-			((CONFIG_IRQ_OPTSEC - 7) << IRQ_OPTSEC_POS) |
-			((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
-			((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
-			((CONFIG_IRQ_PORTH_INTA - 7) << IRQ_PORTH_INTA_POS) |
-			((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
-			((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS));
-
-	bfin_write_SIC_IAR4(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
-			((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
-			((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
-			((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
-			((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
-			((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
-			((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
-			((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS));
-
-	bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) |
-			((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
-			((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
-			((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
-			((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS) |
-			((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) |
-			((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) |
-			((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS));
-
-	bfin_write_SIC_IAR6(((CONFIG_IRQ_NFC_ERROR - 7) << IRQ_NFC_ERROR_POS) |
-			((CONFIG_IRQ_HDMA_ERROR - 7) << IRQ_HDMA_ERROR_POS) |
-			((CONFIG_IRQ_HDMA - 7) << IRQ_HDMA_POS) |
-			((CONFIG_IRQ_USB_EINT - 7) << IRQ_USB_EINT_POS) |
-			((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
-			((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
-			((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
-			((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS));
-
-	SSYNC();
-}