arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 214 deletions

diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
deleted file mode 100644
index a48baae4384d..000000000000
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- *
- * Set up the interrupt priorities
- */
-
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <asm/blackfin.h>
-
-#include <asm/irq_handler.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/bfin_sport.h>
-#include <asm/bfin_can.h>
-#include <asm/bfin_dma.h>
-#include <asm/dpmc.h>
-
-void __init program_IAR(void)
-{
-	/* Program the IAR0 Register with the configured priority */
-	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
-			    ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
-			    ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
-			    ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
-			    ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
-			    ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
-			    ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
-			    ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
-
-	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
-			    ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
-			    ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
-			    ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
-			    ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
-			    ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
-			    ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
-			    ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
-
-	bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
-			    ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
-			    ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
-			    ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
-			    ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
-			    ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
-			    ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
-			    ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
-
-	bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
-			    ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
-			    ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
-			    ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
-			    ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
-			    ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
-			    ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
-			    ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
-
-	SSYNC();
-}
-
-#define SPI_ERR_MASK   (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE)	/* SPI_STAT */
-#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF)	/* SPORT_STAT */
-#define PPI_ERR_MASK   (0xFFFF & ~FLD)	/* PPI_STATUS */
-#define EMAC_ERR_MASK  (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE)	/* EMAC_SYSTAT */
-#define UART_ERR_MASK  (0x6)	/* UART_IIR */
-#define CAN_ERR_MASK   (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF)	/* CAN_GIF */
-
-static int error_int_mask;
-
-static void bf537_generic_error_mask_irq(struct irq_data *d)
-{
-	error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR));
-	if (!error_int_mask)
-		bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
-}
-
-static void bf537_generic_error_unmask_irq(struct irq_data *d)
-{
-	bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
-	error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR);
-}
-
-static struct irq_chip bf537_generic_error_irqchip = {
-	.name = "ERROR",
-	.irq_ack = bfin_ack_noop,
-	.irq_mask_ack = bf537_generic_error_mask_irq,
-	.irq_mask = bf537_generic_error_mask_irq,
-	.irq_unmask = bf537_generic_error_unmask_irq,
-};
-
-static void bf537_demux_error_irq(struct irq_desc *inta_desc)
-{
-	int irq = 0;
-
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-	if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
-		irq = IRQ_MAC_ERROR;
-	else
-#endif
-	if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
-		irq = IRQ_SPORT0_ERROR;
-	else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
-		irq = IRQ_SPORT1_ERROR;
-	else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
-		irq = IRQ_PPI_ERROR;
-	else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
-		irq = IRQ_CAN_ERROR;
-	else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
-		irq = IRQ_SPI_ERROR;
-	else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
-		irq = IRQ_UART0_ERROR;
-	else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
-		irq = IRQ_UART1_ERROR;
-
-	if (irq) {
-		if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR)))
-			bfin_handle_irq(irq);
-		else {
-
-			switch (irq) {
-			case IRQ_PPI_ERROR:
-				bfin_write_PPI_STATUS(PPI_ERR_MASK);
-				break;
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-			case IRQ_MAC_ERROR:
-				bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
-				break;
-#endif
-			case IRQ_SPORT0_ERROR:
-				bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
-				break;
-
-			case IRQ_SPORT1_ERROR:
-				bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
-				break;
-
-			case IRQ_CAN_ERROR:
-				bfin_write_CAN_GIS(CAN_ERR_MASK);
-				break;
-
-			case IRQ_SPI_ERROR:
-				bfin_write_SPI_STAT(SPI_ERR_MASK);
-				break;
-
-			default:
-				break;
-			}
-
-			pr_debug("IRQ %d:"
-				 " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
-				 irq);
-		}
-	} else
-		pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
-		       __func__);
-
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static int mac_rx_int_mask;
-
-static void bf537_mac_rx_mask_irq(struct irq_data *d)
-{
-	mac_rx_int_mask &= ~(1L << (d->irq - IRQ_MAC_RX));
-	if (!mac_rx_int_mask)
-		bfin_internal_mask_irq(IRQ_PH_INTA_MAC_RX);
-}
-
-static void bf537_mac_rx_unmask_irq(struct irq_data *d)
-{
-	bfin_internal_unmask_irq(IRQ_PH_INTA_MAC_RX);
-	mac_rx_int_mask |= 1L << (d->irq - IRQ_MAC_RX);
-}
-
-static struct irq_chip bf537_mac_rx_irqchip = {
-	.name = "ERROR",
-	.irq_ack = bfin_ack_noop,
-	.irq_mask_ack = bf537_mac_rx_mask_irq,
-	.irq_mask = bf537_mac_rx_mask_irq,
-	.irq_unmask = bf537_mac_rx_unmask_irq,
-};
-
-static void bf537_demux_mac_rx_irq(struct irq_desc *desc)
-{
-	if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR))
-		bfin_handle_irq(IRQ_MAC_RX);
-	else
-		bfin_demux_gpio_irq(desc);
-}
-#endif
-
-void __init init_mach_irq(void)
-{
-	int irq;
-
-#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
-	/* Clear EMAC Interrupt Status bits so we can demux it later */
-	bfin_write_EMAC_SYSTAT(-1);
-#endif
-
-	irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq);
-	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
-		irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip,
-					 handle_level_irq);
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	irq_set_chained_handler(IRQ_PH_INTA_MAC_RX, bf537_demux_mac_rx_irq);
-	irq_set_chip_and_handler(IRQ_MAC_RX, &bf537_mac_rx_irqchip, handle_level_irq);
-	irq_set_chip_and_handler(IRQ_PORTH_INTA, &bf537_mac_rx_irqchip, handle_level_irq);
-
-	irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
-#endif
-}