diff options
| author |   Songmao Tian <tiansm@lemote.com> | 2007-06-06 14:52:38 +0800 |
|---|---|---|
| committer |   Ralf Baechle <ralf@linux-mips.org> | 2007-07-10 17:33:02 +0100 |
| commit | 42d226c7248a28ff8c478c06b7e9bd9ef5d73574 (patch) | |
| tree | 7749c1204cbdb481ddece008dc09234c48b769db /arch/mips | |
| parent | [MIPS] define Hit_Invalidate_I to Index_Invalidate_I for loongson2 (diff) | |
| download | linux-dev-42d226c7248a28ff8c478c06b7e9bd9ef5d73574.tar.xz linux-dev-42d226c7248a28ff8c478c06b7e9bd9ef5d73574.zip | |
[MIPS] New files for lemote fulong mini-PC support
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
Signed-off-by: Songmao Tian <tiansm@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/Kconfig | 23 | ||||
| -rw-r--r-- | arch/mips/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/configs/fulong_defconfig | 1767 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/bonito-irq.c | 74 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/dbg_io.c | 146 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/irq.c | 145 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/mem.c | 23 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/pci.c | 93 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/prom.c | 104 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/reset.c | 41 | ||||
| -rw-r--r-- | arch/mips/lemote/lm2e/setup.c | 134 | ||||
| -rw-r--r-- | arch/mips/pci/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/pci/fixup-lm2e.c | 242 | ||||
| -rw-r--r-- | arch/mips/pci/ops-bonito64.c | 88 |
15 files changed, 2840 insertions, 55 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c8d954d6f2c4..3994f611ec26 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -15,6 +15,29 @@ choice prompt "System type" default SGI_IP22 +config LEMOTE_FULONG + bool "Lemote Fulong mini-PC" + select ARCH_SPARSEMEM_ENABLE + select SYS_HAS_CPU_LOONGSON2 + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HAVE_STD_PC_SERIAL_PORT + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select CPU_HAS_WB + help + Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + config MACH_ALCHEMY bool "Alchemy processor based machines" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1e4579cc54ef..6642ee5fdc46 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -291,6 +291,13 @@ cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # +# lemote fulong mini-PC board +# +core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ +load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 +cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote + +# # For all MIPS, Inc. eval boards # core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig new file mode 100644 index 000000000000..549f61b5896a --- /dev/null +++ b/arch/mips/configs/fulong_defconfig @@ -0,0 +1,1767 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Mon Jun 11 00:23:51 2007 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_LEMOTE_FULONG=y +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_WR_PPMC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_MARKEINS is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +CONFIG_CPU_LOONGSON2=y +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_LOONGSON2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +# CONFIG_32BIT is not set +CONFIG_64BIT=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_BOARD_SCACHE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="lm32" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ISA=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_BUILD_ELF64 is not set +CONFIG_MIPS32_COMPAT=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_BINFMT_ELF32=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x1fc00000 +CONFIG_MTD_PHYSMAP_LEN=0x80000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m + +# +# Misc devices +# +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_TC35815 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_NET_FC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_SERIAL=y +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +CONFIG_I2C_VIAPRO=m +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +CONFIG_USB_ET61X251=m +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_ZC0301=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_USB_DSBR is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +# CONFIG_FB_RADEON_I2C is not set +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_SMIVGX is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_RTCTIMER=m +CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_VIA82XX=m +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# ALSA MIPS devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=y +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=936 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp936" +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +CONFIG_NLS_CODEPAGE_936=y +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile new file mode 100644 index 000000000000..fb1b48c48cb3 --- /dev/null +++ b/arch/mips/lemote/lm2e/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for Lemote Fulong mini-PC board. +# + +obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o +EXTRA_AFLAGS := $(CFLAGS) + diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/lemote/lm2e/bonito-irq.c new file mode 100644 index 000000000000..8fc3bce7075b --- /dev/null +++ b/arch/mips/lemote/lm2e/bonito-irq.c @@ -0,0 +1,74 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/mips-boards/bonito64.h> + + +static inline void bonito_irq_enable(unsigned int irq) +{ + BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE)); + mmiowb(); +} + +static inline void bonito_irq_disable(unsigned int irq) +{ + BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE)); + mmiowb(); +} + +static struct irq_chip bonito_irq_type = { + .name = "bonito_irq", + .ack = bonito_irq_disable, + .mask = bonito_irq_disable, + .mask_ack = bonito_irq_disable, + .unmask = bonito_irq_enable, +}; + +static struct irqaction dma_timeout_irqaction = { + .handler = no_action, + .name = "dma_timeout", +}; + +void bonito_irq_init(void) +{ + u32 i; + + for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) { + set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); + } + + setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); +} diff --git a/arch/mips/lemote/lm2e/dbg_io.c b/arch/mips/lemote/lm2e/dbg_io.c new file mode 100644 index 000000000000..6c95da3ca76f --- /dev/null +++ b/arch/mips/lemote/lm2e/dbg_io.c @@ -0,0 +1,146 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <asm/serial.h> + +#define UART16550_BAUD_2400 2400 +#define UART16550_BAUD_4800 4800 +#define UART16550_BAUD_9600 9600 +#define UART16550_BAUD_19200 19200 +#define UART16550_BAUD_38400 38400 +#define UART16550_BAUD_57600 57600 +#define UART16550_BAUD_115200 115200 + +#define UART16550_PARITY_NONE 0 +#define UART16550_PARITY_ODD 0x08 +#define UART16550_PARITY_EVEN 0x18 +#define UART16550_PARITY_MARK 0x28 +#define UART16550_PARITY_SPACE 0x38 + +#define UART16550_DATA_5BIT 0x0 +#define UART16550_DATA_6BIT 0x1 +#define UART16550_DATA_7BIT 0x2 +#define UART16550_DATA_8BIT 0x3 + +#define UART16550_STOP_1BIT 0x0 +#define UART16550_STOP_2BIT 0x4 + +/* ----------------------------------------------------- */ + +/* === CONFIG === */ +#ifdef CONFIG_64BIT +#define BASE (0xffffffffbfd003f8) +#else +#define BASE (0xbfd003f8) +#endif + +#define MAX_BAUD BASE_BAUD +/* === END OF CONFIG === */ + +#define REG_OFFSET 1 + +/* register offset */ +#define OFS_RCV_BUFFER 0 +#define OFS_TRANS_HOLD 0 +#define OFS_SEND_BUFFER 0 +#define OFS_INTR_ENABLE (1*REG_OFFSET) +#define OFS_INTR_ID (2*REG_OFFSET) +#define OFS_DATA_FORMAT (3*REG_OFFSET) +#define OFS_LINE_CONTROL (3*REG_OFFSET) +#define OFS_MODEM_CONTROL (4*REG_OFFSET) +#define OFS_RS232_OUTPUT (4*REG_OFFSET) +#define OFS_LINE_STATUS (5*REG_OFFSET) +#define OFS_MODEM_STATUS (6*REG_OFFSET) +#define OFS_RS232_INPUT (6*REG_OFFSET) +#define OFS_SCRATCH_PAD (7*REG_OFFSET) + +#define OFS_DIVISOR_LSB (0*REG_OFFSET) +#define OFS_DIVISOR_MSB (1*REG_OFFSET) + +/* memory-mapped read/write of the port */ +#define UART16550_READ(y) readb((char *)BASE + (y)) +#define UART16550_WRITE(y, z) writeb(z, (char *)BASE + (y)) + +void debugInit(u32 baud, u8 data, u8 parity, u8 stop) +{ + u32 divisor; + + /* disable interrupts */ + UART16550_WRITE(OFS_INTR_ENABLE, 0); + + /* set up buad rate */ + /* set DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x80); + + /* set divisor */ + divisor = MAX_BAUD / baud; + UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); + UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); + + /* clear DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x0); + + /* set data format */ + UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); +} + +static int remoteDebugInitialized; + +u8 getDebugChar(void) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ; + return UART16550_READ(OFS_RCV_BUFFER); +} + +int putDebugChar(u8 byte) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + /* + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); */ + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ; + UART16550_WRITE(OFS_SEND_BUFFER, byte); + return 1; +} diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c new file mode 100644 index 000000000000..05693bceaeaf --- /dev/null +++ b/arch/mips/lemote/lm2e/irq.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/mips-boards/bonito64.h> + + +/* + * the first level int-handler will jump here if it is a bonito irq + */ +static void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = BONITO_INTISR; + if (int_status & (1 << 10)) { + while (int_status & (1 << 10)) { + udelay(1); + int_status = BONITO_INTISR; + } + } + + /* Get pending sources, masked by current enables */ + int_status = BONITO_INTISR & BONITO_INTEN; + + if (int_status != 0) { + i = __ffs(int_status); + int_status &= ~(1 << i); + do_IRQ(BONITO_IRQ_BASE + i); + } +} + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) { + do_IRQ(irq); + } else { + spurious_interrupt(); + } + +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) { + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + } else if (pending & CAUSEF_IP5) { + i8259_irqdispatch(); + } else if (pending & CAUSEF_IP2) { + bonito_irqdispatch(); + } else { + spurious_interrupt(); + } +} + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + +void __init arch_init_irq(void) +{ + extern void bonito_irq_init(void); + + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + local_irq_disable(); + + /* most bonito irq should be level triggered */ + BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | + BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; + BONITO_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + BONITO_INTENCLR = ~0; + + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* + printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE); + printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n", + BONITO_INTEN, BONITO_INTENSET, + BONITO_INTENCLR, BONITO_INTISR); + */ + + /* bonito irq at IP2 */ + setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); + /* 8259 irq at IP5 */ + setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); + +} diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/lemote/lm2e/mem.c new file mode 100644 index 000000000000..16cd21587d34 --- /dev/null +++ b/arch/mips/lemote/lm2e/mem.c @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/fs.h> +#include <linux/fcntl.h> +#include <linux/mm.h> + +/* override of arch/mips/mm/cache.c: __uncached_access */ +int __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_SYNC) + return 1; + + /* + * On the Lemote Loongson 2e system, the peripheral registers + * reside between 0x1000:0000 and 0x2000:0000. + */ + return addr >= __pa(high_memory) || + ((addr >= 0x10000000) && (addr < 0x20000000)); +} diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c new file mode 100644 index 000000000000..1ade1cef3899 --- /dev/null +++ b/arch/mips/lemote/lm2e/pci.c @@ -0,0 +1,93 @@ +/* + * pci.c + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/mips-boards/bonito64.h> + +extern struct pci_ops bonito64_pci_ops; + +static struct resource loongson2e_pci_mem_resource = { + .name = "LOONGSON2E PCI MEM", + .start = 0x14000000UL, + .end = 0x1fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson2e_pci_io_resource = { + .name = "LOONGSON2E PCI IO MEM", + .start = 0x00004000UL, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson2e_pci_controller = { + .pci_ops = &bonito64_pci_ops, + .io_resource = &loongson2e_pci_io_resource, + .mem_resource = &loongson2e_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init ict_pcimap(void) +{ + /* + * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON + * + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M] + * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0 + */ + /* 1,00 0110 ,0001 01,00 0000 */ + BONITO_PCIMAP = 0x46140; + + /* 1, 00 0010, 0000,01, 00 0000 */ + /* BONITO_PCIMAP = 0x42040; */ + + /* + * PCI to local mapping: [2G,2G+256M] -> [0,256M] + */ + BONITO_PCIBASE0 = 0x80000000; + BONITO_PCIBASE1 = 0x00800000; + BONITO_PCIBASE2 = 0x90000000; + +} + +static int __init pcibios_init(void) +{ + extern int pci_probe_only; + pci_probe_only = 0; + + ict_pcimap(); + register_pci_controller(&loongson2e_pci_controller); + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c new file mode 100644 index 000000000000..67312d7acf2a --- /dev/null +++ b/arch/mips/lemote/lm2e/prom.c @@ -0,0 +1,104 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +extern unsigned long bus_clock; +extern unsigned long cpu_clock; +extern unsigned int memsize, highmemsize; +extern int putDebugChar(unsigned char byte); + +static int argc; +/* pmon passes arguments in 32bit pointers */ +static int *arg; +static int *env; + +const char *get_system_type(void) +{ + return "lemote-fulong"; +} + +void __init prom_init_cmdline(void) +{ + int i; + long l; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < argc; i++) { + l = (long)arg[i]; + if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, ((char *)l)); + strcat(arcs_cmdline, " "); + } +} + +void __init prom_init(void) +{ + long l; + argc = fw_arg0; + arg = (int *)fw_arg1; + env = (int *)fw_arg2; + + mips_machgroup = MACH_GROUP_LEMOTE; + mips_machtype = MACH_LEMOTE_FULONG; + + prom_init_cmdline(); + + if ((strstr(arcs_cmdline, "console=")) == NULL) + strcat(arcs_cmdline, " console=ttyS0,115200"); + if ((strstr(arcs_cmdline, "root=")) == NULL) + strcat(arcs_cmdline, " root=/dev/hda1"); + +#define parse_even_earlier(res, option, p) \ +do { \ + if (strncmp(option, (char *)p, strlen(option)) == 0) \ + res = simple_strtol((char *)p + strlen(option"="), \ + NULL, 10); \ +} while (0) + + l = (long)*env; + while (l != 0) { + parse_even_earlier(bus_clock, "busclock", l); + parse_even_earlier(cpu_clock, "cpuclock", l); + parse_even_earlier(memsize, "memsize", l); + parse_even_earlier(highmemsize, "highmemsize", l); + env++; + l = (long)*env; + } + if (memsize == 0) + memsize = 256; + + pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n", + bus_clock, cpu_clock, memsize, highmemsize); +} + +void __init prom_free_prom_memory(void) +{ +} + +void prom_putchar(char c) +{ + putDebugChar(c); +} diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c new file mode 100644 index 000000000000..099387a3827a --- /dev/null +++ b/arch/mips/lemote/lm2e/reset.c @@ -0,0 +1,41 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pm.h> + +#include <asm/reboot.h> + +static void loongson2e_restart(char *command) +{ +#ifdef CONFIG_32BIT + *(unsigned long *)0xbfe00104 &= ~(1 << 2); + *(unsigned long *)0xbfe00104 |= (1 << 2); +#else + *(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2); + *(unsigned long *)0xffffffffbfe00104 |= (1 << 2); +#endif + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +} + +static void loongson2e_halt(void) +{ + while (1) ; +} + +static void loongson2e_power_off(void) +{ + loongson2e_halt(); +} + +void mips_reboot_setup(void) +{ + _machine_restart = loongson2e_restart; + _machine_halt = loongson2e_halt; + pm_power_off = loongson2e_power_off; +} diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c new file mode 100644 index 000000000000..0e4d1fa572b5 --- /dev/null +++ b/arch/mips/lemote/lm2e/setup.c @@ -0,0 +1,134 @@ +/* + * BRIEF MODULE DESCRIPTION + * setup.c - board dependent boot routines + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/bootmem.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/mc146818rtc.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/tty.h> +#include <linux/types.h> + +#include <asm/bootinfo.h> +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/wbflush.h> + +#ifdef CONFIG_VT +#include <linux/console.h> +#include <linux/screen_info.h> +#endif + +extern void mips_reboot_setup(void); + +#ifdef CONFIG_64BIT +#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p))) +#else +#define PTR_PAD(p) (p) +#endif + +unsigned long cpu_clock; +unsigned long bus_clock; +unsigned int memsize; +unsigned int highmemsize = 0; + +void __init plat_timer_setup(struct irqaction *irq) +{ + setup_irq(MIPS_CPU_IRQ_BASE + 7, irq); +} + +static void __init loongson2e_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock / 2; +} + +static unsigned long __init mips_rtc_get_time(void) +{ + return mc146818_get_cmos_time(); +} + +void (*__wbflush)(void); +EXPORT_SYMBOL(__wbflush); + +static void wbflush_loongson2e(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(PTR_PAD(0xbfd00000)); + + mips_reboot_setup(); + + board_time_init = loongson2e_time_init; + rtc_mips_get_time = mips_rtc_get_time; + + __wbflush = wbflush_loongson2e; + + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); +#ifdef CONFIG_64BIT + if (highmemsize > 0) { + add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM); + } +#endif + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; + + screen_info = (struct screen_info) { + 0, 25, /* orig-x, orig-y */ + 0, /* unused */ + 0, /* orig-video-page */ + 0, /* orig-video-mode */ + 80, /* orig-video-cols */ + 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ + 25, /* orig-video-lines */ + VIDEO_TYPE_VGAC, /* orig-video-isVGA */ + 16 /* orig-video-points */ + }; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif + +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index a3e741e190f2..276a10b06bb5 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o +obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c new file mode 100644 index 000000000000..e18ae4f574c1 --- /dev/null +++ b/arch/mips/pci/fixup-lm2e.c @@ -0,0 +1,242 @@ +/* + * fixup-lm2e.c + * + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, ICT CAS + * lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/mips-boards/bonito64.h> + +/* South bridge slot number is set by the pci probe process */ +static u8 sb_slot = 5; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = 0; + + if (slot == sb_slot) { + switch (PCI_FUNC(dev->devfn)) { + case 2: + irq = 10; + break; + case 3: + irq = 11; + break; + case 5: + irq = 9; + break; + } + } else { + irq = BONITO_IRQ_BASE + 25 + pin; + } + return irq; + +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static void __init loongson2e_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Configues port 1, 2, 3, 4 to be validate*/ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); + + /* System clock is 48-MHz Oscillator. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} + +static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) +{ + unsigned char c; + + sb_slot = PCI_SLOT(pdev->devfn); + + printk(KERN_INFO "via686b fix: ISA bridge\n"); + + /* Enable I/O Recovery time */ + pci_write_config_byte(pdev, 0x40, 0x08); + + /* Enable ISA refresh */ + pci_write_config_byte(pdev, 0x41, 0x01); + + /* disable ISA line buffer */ + pci_write_config_byte(pdev, 0x45, 0x00); + + /* Gate INTR, and flush line buffer */ + pci_write_config_byte(pdev, 0x46, 0xe0); + + /* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ + /* pci_write_config_byte(pdev, 0x47, 0x20); */ + + /* + * enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. + * enable time-out timer + */ + pci_write_config_byte(pdev, 0x47, 0xe6); + + /* + * enable level trigger on pci irqs: 9,10,11,13 + * important! without this PCI interrupts won't work + */ + outb(0x2e, 0x4d1); + + /* 512 K PCI Decode */ + pci_write_config_byte(pdev, 0x48, 0x01); + + /* Wait for PGNT before grant to ISA Master/DMA */ + pci_write_config_byte(pdev, 0x4a, 0x84); + + /* + * Plug'n'Play + * + * Parallel DRQ 3, Floppy DRQ 2 (default) + */ + pci_write_config_byte(pdev, 0x50, 0x0e); + + /* + * IRQ Routing for Floppy and Parallel port + * + * IRQ 6 for floppy, IRQ 7 for parallel port + */ + pci_write_config_byte(pdev, 0x51, 0x76); + + /* IRQ Routing for serial ports (take IRQ 3 and 4) */ + pci_write_config_byte(pdev, 0x52, 0x34); + + /* All IRQ's level triggered. */ + pci_write_config_byte(pdev, 0x54, 0x00); + + /* route PIRQA-D irq */ + pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ + pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ + /* 3-0, PIRQB */ + pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ + + /* enable function 5/6, audio/modem */ + pci_read_config_byte(pdev, 0x85, &c); + c &= ~(0x3 << 2); + pci_write_config_byte(pdev, 0x85, c); + + printk(KERN_INFO"via686b fix: ISA bridge done\n"); +} + +static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) +{ + printk(KERN_INFO"via686b fix: IDE\n"); + + /* Modify IDE controller setup */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_write_config_byte(pdev, 0x40, 0x0b); + /* legacy mode */ + pci_write_config_byte(pdev, 0x42, 0x09); + +#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ + /* disable read prefetch/write post buffers */ + pci_write_config_byte(pdev, 0x41, 0x02); + + /* use 3/4 as fifo thresh hold */ + pci_write_config_byte(pdev, 0x43, 0x0a); + pci_write_config_byte(pdev, 0x44, 0x00); + + pci_write_config_byte(pdev, 0x45, 0x00); +#else + pci_write_config_byte(pdev, 0x41, 0xc2); + pci_write_config_byte(pdev, 0x43, 0x35); + pci_write_config_byte(pdev, 0x44, 0x1c); + + pci_write_config_byte(pdev, 0x45, 0x10); +#endif + + printk(KERN_INFO"via686b fix: IDE done\n"); +} + +static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); +} + +static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); +} + +static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) +{ + unsigned int val; + unsigned char c; + + /* enable IO */ + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_read_config_dword(pdev, 0x4, &val); + pci_write_config_dword(pdev, 0x4, val | 1); + + /* route ac97 IRQ */ + pci_write_config_byte(pdev, 0x3c, 9); + + pci_read_config_byte(pdev, 0x8, &c); + + /* link control: enable link & SGD PCM output */ + pci_write_config_byte(pdev, 0x41, 0xcc); + + /* disable game port, FM, midi, sb, enable write to reg2c-2f */ + pci_write_config_byte(pdev, 0x42, 0x20); + + /* we are using Avance logic codec */ + pci_write_config_word(pdev, 0x2c, 0x1005); + pci_write_config_word(pdev, 0x2e, 0x4710); + pci_read_config_dword(pdev, 0x2c, &val); + + pci_write_config_byte(pdev, 0x42, 0x0); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, + loongson2e_686b_func0_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, + loongson2e_686b_func1_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, + loongson2e_686b_func2_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, + loongson2e_686b_func3_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, + loongson2e_686b_func5_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson2e_nec_fixup); diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index dc35270b65a2..f742c51acf0d 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,83 +29,60 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -/* - * PCI configuration cycle AD bus definition - */ -/* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 +#ifdef CONFIG_LEMOTE_FULONG +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#else +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) +#define ID_SEL_BEGIN 10 +#endif +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) -/* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 static int bonito64_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { - unsigned char busnum = bus->number; + u32 busnum = bus->number; + u32 addr, type; u32 dummy; - u64 pci_addr; - - /* Algorithmics Bonito64 system controller. */ + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; - if ((busnum == 0) && (PCI_SLOT(devfn) > 21)) { - /* We number bus 0 devices from 0..21 */ - return -1; - } - - /* Clear cause register bits */ - BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR | - BONITO_PCICMD_MTABORT_CLR); - - /* - * Setup pattern to be used as PCI "address" for - * Type 0 cycle - */ if (busnum == 0) { - /* IDSEL */ - pci_addr = (u64) 1 << (PCI_SLOT(devfn) + 10); - } else { - /* Bus number */ - pci_addr = busnum << PCI_CFG_TYPE1_BUS_SHF; - - /* Device number */ - pci_addr |= - PCI_SLOT(devfn) << PCI_CFG_TYPE1_DEV_SHF; - } - - /* Function (same for Type 0/1) */ - pci_addr |= PCI_FUNC(devfn) << PCI_CFG_TYPE0_FUNC_SHF; - - /* Register number (same for Type 0/1) */ - pci_addr |= (where & ~0x3) << PCI_CFG_TYPE0_REG_SHF; + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; - if (busnum == 0) { - /* Type 0 */ - BONITO_PCIMAP_CFG = pci_addr >> 16; + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; } else { - /* Type 1 */ - BONITO_PCIMAP_CFG = (pci_addr >> 16) | 0x10000; + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; } - pci_addr &= 0xffff; + /* Clear aborts */ + BONITO_PCICMD |= BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR; + + BONITO_PCIMAP_CFG = (addr >> 16) | type; /* Flush Bonito register block */ dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ + mmiowb(); - /* Perform access */ + addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { - *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr) = *(u32 *) data; - + writel(cpu_to_le32(*data), addrp); +#ifndef CONFIG_LEMOTE_FULONG /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); +#endif } else { - *(u32 *) data = *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr); + *data = le32_to_cpu(readl(addrp)); } /* Detect Master/Target abort */ @@ -121,6 +98,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type, } return 0; + } |