aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2007-10-09 14:45:28 -0600
committerGrant Likely <grant.likely@secretlab.ca>2007-10-10 10:22:04 -0600
commit4de3b992a6880828943f1b5849e1e7153fe4185c (patch)
treef020001483d877540a17297c9d9b3bfb6d9582fd /arch/powerpc
parent[POWERPC] MPC52xx: Trim includes on mpc5200 platform support code (diff)
downloadlinux-dev-4de3b992a6880828943f1b5849e1e7153fe4185c.tar.xz
linux-dev-4de3b992a6880828943f1b5849e1e7153fe4185c.zip
[POWERPC] MPC5200: Don't make firmware fixups into common code
The Lite5200 u-boot image doesn't entirely configure the processor correctly and so Linux needs to fixup the cpu setup in setup_arch. Fixing the CPU setup is good, but making it into common code is not a good idea. New board ports should be encouraged not to take the lead of the lite5200 and instead get their firmware to setup the CPU the right way. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
Diffstat (limited to '')
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c59
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_common.c35
2 files changed, 61 insertions, 33 deletions
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 7fa0ec8d91cc..0caa3d955c3b 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -30,19 +30,56 @@
*
*/
+/*
+ * Fix clock configuration.
+ *
+ * Firmware is supposed to be responsible for this. If you are creating a
+ * new board port, do *NOT* duplicate this code. Fix your boot firmware
+ * to set it correctly in the first place
+ */
+static void __init
+lite5200_fix_clock_config(void)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+
+ /* Map zones */
+ cdm = mpc52xx_find_and_map("mpc5200-cdm");
+ if (!cdm) {
+ printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Unmap the regs */
+ iounmap(cdm);
+}
+
+/*
+ * Fix setting of port_config register.
+ *
+ * Firmware is supposed to be responsible for this. If you are creating a
+ * new board port, do *NOT* duplicate this code. Fix your boot firmware
+ * to set it correctly in the first place
+ */
static void __init
-lite5200_setup_cpu(void)
+lite5200_fix_port_config(void)
{
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
- /* Map zones */
gpio = mpc52xx_find_and_map("mpc5200-gpio");
if (!gpio) {
- printk(KERN_ERR __FILE__ ": "
- "Error while mapping GPIO register for port config. "
- "Expect some abnormal behavior\n");
- goto error;
+ printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+ __FUNCTION__);
+ return;
}
/* Set port config */
@@ -61,7 +98,6 @@ lite5200_setup_cpu(void)
out_be32(&gpio->port_config, port_config);
/* Unmap zone */
-error:
iounmap(gpio);
}
@@ -100,9 +136,12 @@ static void __init lite5200_setup_arch(void)
if (ppc_md.progress)
ppc_md.progress("lite5200_setup_arch()", 0);
- /* CPU & Port mux setup */
- mpc52xx_setup_cpu(); /* Generic */
- lite5200_setup_cpu(); /* Platorm specific */
+ /* Fix things that firmware should have done. */
+ lite5200_fix_clock_config();
+ lite5200_fix_port_config();
+
+ /* Some mpc5200 & mpc5200b related configuration */
+ mpc5200_setup_xlb_arbiter();
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 3eeb6c62e0ff..3bc201e07e6b 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -75,44 +75,33 @@ mpc52xx_find_ipb_freq(struct device_node *node)
EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
+/*
+ * Configure the XLB arbiter settings to match what Linux expects.
+ */
void __init
-mpc52xx_setup_cpu(void)
+mpc5200_setup_xlb_arbiter(void)
{
- struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_xlb __iomem *xlb;
- /* Map zones */
- cdm = mpc52xx_find_and_map("mpc5200-cdm");
xlb = mpc52xx_find_and_map("mpc5200-xlb");
-
- if (!cdm || !xlb) {
+ if (!xlb) {
printk(KERN_ERR __FILE__ ": "
- "Error while mapping CDM/XLB during mpc52xx_setup_cpu. "
+ "Error mapping XLB in mpc52xx_setup_cpu(). "
"Expect some abnormal behavior\n");
- goto unmap_regs;
+ return;
}
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
/* Configure the XLB Arbiter priorities */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
- /* Disable XLB pipelining */
- /* (cfr errate 292. We could do this only just before ATA PIO
- transaction and re-enable it afterwards ...) */
+ /* Disable XLB pipelining
+ * (cfr errate 292. We could do this only just before ATA PIO
+ * transaction and re-enable it afterwards ...)
+ */
out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
- /* Unmap zones */
-unmap_regs:
- if (cdm) iounmap(cdm);
- if (xlb) iounmap(xlb);
+ iounmap(xlb);
}
void __init