aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ppc/kernel
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2006-03-28 10:22:10 +1100
committerPaul Mackerras <paulus@samba.org>2006-03-28 10:22:10 +1100
commit0a26b1364f14852bc9a51db0ca63c5250c775627 (patch)
tree83422473cb4bf4c450012cded06288a0dc6abedf /arch/ppc/kernel
parentpowerpc: Fix goof in 6xx and POWER4 idle power-save functions (diff)
downloadlinux-dev-0a26b1364f14852bc9a51db0ca63c5250c775627.tar.xz
linux-dev-0a26b1364f14852bc9a51db0ca63c5250c775627.zip
ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are all 64-bit PowerPC processors. This means that we don't use Open Firmware on any platform in arch/ppc any more. This makes PReP support a single-platform option like every other platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM is gone from arch/ppc. CONFIG_PPC_PREP is the option that selects PReP support and is generally what has replaced CONFIG_PPC_MULTIPLATFORM within arch/ppc. _machine is all but dead now, being #defined to 0. Updated Makefiles, comments and Kconfig options generally to reflect these changes. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/kernel')
-rw-r--r--arch/ppc/kernel/entry.S52
-rw-r--r--arch/ppc/kernel/head.S183
-rw-r--r--arch/ppc/kernel/pci.c396
-rw-r--r--arch/ppc/kernel/ppc_htab.c8
-rw-r--r--arch/ppc/kernel/ppc_ksyms.c22
-rw-r--r--arch/ppc/kernel/setup.c254
6 files changed, 12 insertions, 903 deletions
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index fa8d49789ef1..5891ecbdc703 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -930,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
b 4b
.comm ee_restarts,4
-
-/*
- * PROM code for specific machines follows. Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_OF
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
- stwu r1,-INT_FRAME_SIZE(r1)
- mflr r0
- stw r0,INT_FRAME_SIZE+4(r1)
- lis r4,rtas_data@ha
- lwz r4,rtas_data@l(r4)
- lis r6,1f@ha /* physical return address for rtas */
- addi r6,r6,1f@l
- tophys(r6,r6)
- tophys(r7,r1)
- lis r8,rtas_entry@ha
- lwz r8,rtas_entry@l(r8)
- mfmsr r9
- stw r9,8(r1)
- LOAD_MSR_KERNEL(r0,MSR_KERNEL)
- SYNC /* disable interrupts so SRR0/1 */
- MTMSRD(r0) /* don't get trashed */
- li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
- mtlr r6
- CLR_TOP32(r7)
- mtspr SPRN_SPRG2,r7
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI
-1: tophys(r9,r1)
- lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */
- lwz r9,8(r9) /* original msr value */
- FIX_SRR1(r9,r0)
- addi r1,r1,INT_FRAME_SIZE
- li r0,0
- mtspr SPRN_SPRG2,r0
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI /* return to caller */
-
- .globl machine_check_in_rtas
-machine_check_in_rtas:
- twi 31,0,0
- /* XXX load up BATs and panic */
-
-#endif /* CONFIG_PPC_OF */
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 53ea845fb911..01303efeddad 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -37,19 +37,6 @@
#include <asm/amigappc.h>
#endif
-#ifdef CONFIG_PPC64BRIDGE
-#define LOAD_BAT(n, reg, RA, RB) \
- ld RA,(n*32)+0(reg); \
- ld RB,(n*32)+8(reg); \
- mtspr SPRN_IBAT##n##U,RA; \
- mtspr SPRN_IBAT##n##L,RB; \
- ld RA,(n*32)+16(reg); \
- ld RB,(n*32)+24(reg); \
- mtspr SPRN_DBAT##n##U,RA; \
- mtspr SPRN_DBAT##n##L,RB; \
-
-#else /* CONFIG_PPC64BRIDGE */
-
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -66,7 +53,6 @@
mtspr SPRN_DBAT##n##U,RA; \
mtspr SPRN_DBAT##n##L,RB; \
1:
-#endif /* CONFIG_PPC64BRIDGE */
.text
.stabs "arch/ppc/kernel/",N_SO,0,0,0f
@@ -129,11 +115,6 @@ _start:
.globl __start
__start:
-/*
- * We have to do any OF calls before we map ourselves to KERNELBASE,
- * because OF may have I/O devices mapped into that area
- * (particularly on CHRP).
- */
mr r31,r3 /* save parameters */
mr r30,r4
mr r29,r5
@@ -148,14 +129,6 @@ __start:
*/
bl early_init
-/*
- * On POWER4, we first need to tweak some CPU configuration registers
- * like real mode cache inhibit or exception base
- */
-#ifdef CONFIG_POWER4
- bl __970_cpu_preinit
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_APUS
/* On APUS the __va/__pa constants need to be set to the correct
* values before continuing.
@@ -169,7 +142,6 @@ __start:
*/
bl mmu_off
__after_mmu_off:
-#ifndef CONFIG_POWER4
bl clear_bats
bl flush_tlbs
@@ -177,10 +149,6 @@ __after_mmu_off:
#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
-#else /* CONFIG_POWER4 */
- bl reloc_offset
- bl initial_mm_power4
-#endif /* CONFIG_POWER4 */
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -192,18 +160,11 @@ __after_mmu_off:
bl reloc_offset
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- bl reloc_offset
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
- * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
- * the exception vectors at 0 (and therefore this copy
- * overwrites OF's exception vectors with our own).
* If the MMU is already turned on, we copy stuff to KERNELBASE,
* otherwise we copy it to 0.
*/
@@ -358,51 +319,19 @@ i##n: \
#endif
/* Machine check */
-/*
- * On CHRP, this is complicated by the fact that we could get a
- * machine check inside RTAS, and we have no guarantee that certain
- * critical registers will have the values we expect. The set of
- * registers that might have bad values includes all the GPRs
- * and all the BATs. We indicate that we are in RTAS by putting
- * a non-zero value, the address of the exception frame to use,
- * in SPRG2. The machine check handler checks SPRG2 and uses its
- * value if it is non-zero. If we ever needed to free up SPRG2,
- * we could use a field in the thread_info or thread_struct instead.
- * (Other exception handlers assume that r1 is a valid kernel stack
- * pointer when we take an exception from supervisor mode.)
- * -- paulus.
- */
. = 0x200
mtspr SPRN_SPRG0,r10
mtspr SPRN_SPRG1,r11
mfcr r10
-#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
- cmpwi 0,r11,0
- bne 7f
-#endif /* CONFIG_PPC_CHRP */
EXCEPTION_PROLOG_1
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
- cmpwi cr1,r4,0
- bne cr1,1f
-#endif
EXC_XFER_STD(0x200, machine_check_exception)
-#ifdef CONFIG_PPC_CHRP
-1: b machine_check_in_rtas
-#endif
/* Data access exception. */
. = 0x300
-#ifdef CONFIG_PPC64BRIDGE
- b DataAccess
-DataAccessCont:
-#else
DataAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
mfspr r10,SPRN_DSISR
andis. r0,r10,0xa470 /* weird error? */
bne 1f /* if not, try to put a PTE */
@@ -414,21 +343,10 @@ DataAccess:
mfspr r4,SPRN_DAR
EXC_XFER_EE_LITE(0x300, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on data access. */
- . = 0x380
- b DataSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* Instruction access exception. */
. = 0x400
-#ifdef CONFIG_PPC64BRIDGE
- b InstructionAccess
-InstructionAccessCont:
-#else
InstructionAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
andis. r0,r9,0x4000 /* no pte found? */
beq 1f /* if so, try to put a PTE */
li r3,0 /* into the hash table */
@@ -438,12 +356,6 @@ InstructionAccess:
mr r5,r9
EXC_XFER_EE_LITE(0x400, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on instruction access. */
- . = 0x480
- b InstructionSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* External interrupt */
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
@@ -708,15 +620,9 @@ DataStoreTLBMiss:
EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_POWER4
- EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE)
- EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
-#else /* !CONFIG_POWER4 */
EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_POWER4 */
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
@@ -754,28 +660,6 @@ AltiVecUnavailable:
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-#ifdef CONFIG_PPC64BRIDGE
-DataAccess:
- EXCEPTION_PROLOG
- b DataAccessCont
-
-InstructionAccess:
- EXCEPTION_PROLOG
- b InstructionAccessCont
-
-DataSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- EXC_XFER_STD(0x380, unknown_exception)
-
-InstructionSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x480, unknown_exception)
-#endif /* CONFIG_PPC64BRIDGE */
-
#ifdef CONFIG_ALTIVEC
/* Note that the AltiVec support is closely modeled after the FP
* support. Changes to one are likely to be applicable to the
@@ -1048,13 +932,6 @@ __secondary_start_pmac_0:
.globl __secondary_start
__secondary_start:
-#ifdef CONFIG_PPC64BRIDGE
- mfmsr r0
- clrldi r0,r0,1 /* make sure it's in 32-bit mode */
- SYNC
- MTMSRD(r0)
- isync
-#endif
/* Copy some CPU settings from CPU 0 */
bl __restore_cpu_setup
@@ -1065,10 +942,6 @@ __secondary_start:
lis r3,-KERNELBASE@h
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- lis r3,-KERNELBASE@h
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
/* get current_thread_info and current */
lis r1,secondary_ti@ha
@@ -1109,12 +982,12 @@ __secondary_start:
* Those generic dummy functions are kept for CPUs not
* included in CONFIG_6xx
*/
-#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+#if !defined(CONFIG_6xx)
_GLOBAL(__save_cpu_setup)
blr
_GLOBAL(__restore_cpu_setup)
blr
-#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+#endif /* !defined(CONFIG_6xx) */
/*
@@ -1132,11 +1005,6 @@ load_up_mmu:
tophys(r6,r6)
lwz r6,_SDR1@l(r6)
mtspr SPRN_SDR1,r6
-#ifdef CONFIG_PPC64BRIDGE
- /* clear the ASR so we only use the pseudo-segment registers. */
- li r6,0
- mtasr r6
-#endif /* CONFIG_PPC64BRIDGE */
li r0,16 /* load up segment register values */
mtctr r0 /* for context 0 */
lis r3,0x2000 /* Ku = 1, VSID = 0 */
@@ -1145,7 +1013,7 @@ load_up_mmu:
addi r3,r3,0x111 /* increment VSID */
addis r4,r4,0x1000 /* address of next segment */
bdnz 3b
-#ifndef CONFIG_POWER4
+
/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
mfpvr r3
@@ -1158,7 +1026,7 @@ load_up_mmu:
LOAD_BAT(1,r3,r4,r5)
LOAD_BAT(2,r3,r4,r5)
LOAD_BAT(3,r3,r4,r5)
-#endif /* CONFIG_POWER4 */
+
blr
/*
@@ -1269,9 +1137,6 @@ _GLOBAL(set_context)
li r4,0
isync
3:
-#ifdef CONFIG_PPC64BRIDGE
- slbie r4
-#endif /* CONFIG_PPC64BRIDGE */
mtsrin r3,r4
addi r3,r3,0x111 /* next VSID */
rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
@@ -1358,7 +1223,6 @@ mmu_off:
sync
RFI
-#ifndef CONFIG_POWER4
/*
* Use the first pair of BAT registers to map the 1st 16MB
* of RAM to KERNELBASE. From this point on we can't safely
@@ -1366,7 +1230,6 @@ mmu_off:
*/
initial_bats:
lis r11,KERNELBASE@h
-#ifndef CONFIG_PPC64BRIDGE
mfspr r9,SPRN_PVR
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
cmpwi 0,r9,1
@@ -1381,7 +1244,6 @@ initial_bats:
mtspr SPRN_IBAT1L,r10
isync
blr
-#endif /* CONFIG_PPC64BRIDGE */
4: tophys(r8,r11)
#ifdef CONFIG_SMP
@@ -1395,11 +1257,6 @@ initial_bats:
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
#endif /* CONFIG_APUS */
-#ifdef CONFIG_PPC64BRIDGE
- /* clear out the high 32 bits in the BAT */
- clrldi r11,r11,32
- clrldi r8,r8,32
-#endif /* CONFIG_PPC64BRIDGE */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
mtspr SPRN_IBAT0L,r8
@@ -1432,38 +1289,6 @@ setup_disp_bat:
#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
-#else /* CONFIG_POWER4 */
-/*
- * Load up the SDR1 and segment register values now
- * since we don't have the BATs.
- * Also make sure we are running in 32-bit mode.
- */
-
-initial_mm_power4:
- addis r14,r3,_SDR1@ha /* get the value from _SDR1 */
- lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */
- mtspr SPRN_SDR1,r14
- slbia
- lis r4,0x2000 /* set pseudo-segment reg 12 */
- ori r5,r4,0x0ccc
- mtsr 12,r5
-#if 0
- ori r5,r4,0x0888 /* set pseudo-segment reg 8 */
- mtsr 8,r5 /* (for access to serial port) */
-#endif
-#ifdef CONFIG_BOOTX_TEXT
- ori r5,r4,0x0999 /* set pseudo-segment reg 9 */
- mtsr 9,r5 /* (for access to screen) */
-#endif
- mfmsr r0
- clrldi r0,r0,1
- sync
- mtmsr r0
- isync
- blr
-
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 04d04c5bfdd0..809673a36f7a 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
-static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers.
*/
@@ -625,406 +622,13 @@ pcibios_alloc_controller(void)
return hose;
}
-#ifdef CONFIG_PPC_OF
-/*
- * Functions below are used on OpenFirmware machines.
- */
-static void
-make_one_node_map(struct device_node* node, u8 pci_bus)
-{
- int *bus_range;
- int len;
-
- if (pci_bus >= pci_bus_count)
- return;
- bus_range = (int *) get_property(node, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, "
- "assuming it starts at 0\n", node->full_name);
- pci_to_OF_bus_map[pci_bus] = 0;
- } else
- pci_to_OF_bus_map[pci_bus] = bus_range[0];
-
- for (node=node->child; node != 0;node = node->sibling) {
- struct pci_dev* dev;
- unsigned int *class_code, *reg;
-
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
- continue;
- reg = (unsigned int *)get_property(node, "reg", NULL);
- if (!reg)
- continue;
- dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
- if (!dev || !dev->subordinate)
- continue;
- make_one_node_map(node, dev->subordinate->number);
- }
-}
-
-void
-pcibios_make_OF_bus_map(void)
-{
- int i;
- struct pci_controller* hose;
- u8* of_prop_map;
-
- pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
- if (!pci_to_OF_bus_map) {
- printk(KERN_ERR "Can't allocate OF bus map !\n");
- return;
- }
-
- /* We fill the bus map with invalid values, that helps
- * debugging.
- */
- for (i=0; i<pci_bus_count; i++)
- pci_to_OF_bus_map[i] = 0xff;
-
- /* For each hose, we begin searching bridges */
- for(hose=hose_head; hose; hose=hose->next) {
- struct device_node* node;
- node = (struct device_node *)hose->arch_data;
- if (!node)
- continue;
- make_one_node_map(node, hose->first_busno);
- }
- of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
- if (of_prop_map)
- memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
-#ifdef DEBUG
- printk("PCI->OF bus map:\n");
- for (i=0; i<pci_bus_count; i++) {
- if (pci_to_OF_bus_map[i] == 0xff)
- continue;
- printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
- }
-#endif
-}
-
-typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
-
-static struct device_node*
-scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
-{
- struct device_node* sub_node;
-
- for (; node != 0;node = node->sibling) {
- unsigned int *class_code;
-
- if (filter(node, data))
- return node;
-
- /* For PCI<->PCI bridges or CardBus bridges, we go down
- * Note: some OFs create a parent node "multifunc-device" as
- * a fake root for all functions of a multi-function device,
- * we go down them as well.
- */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
- strcmp(node->name, "multifunc-device"))
- continue;
- sub_node = scan_OF_pci_childs(node->child, filter, data);
- if (sub_node)
- return sub_node;
- }
- return NULL;
-}
-
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
-{
- unsigned int *reg;
- u8* fdata = (u8*)data;
-
- reg = (unsigned int *) get_property(node, "reg", NULL);
- if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
- && ((reg[0] >> 16) & 0xff) == fdata[0])
- return 1;
- return 0;
-}
-
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
-{
- u8 filter_data[2] = {bus, dev_fn};
-
- return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
-}
-
-/*
- * Scans the OF tree for a device node matching a PCI device
- */
-struct device_node *
-pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
-{
- struct pci_controller *hose;
- struct device_node *node;
- int busnr;
-
- if (!have_of)
- return NULL;
-
- /* Lookup the hose */
- busnr = bus->number;
- hose = pci_bus_to_hose(busnr);
- if (!hose)
- return NULL;
-
- /* Check it has an OF node associated */
- node = (struct device_node *) hose->arch_data;
- if (!node)
- return NULL;
-
- /* Fixup bus number according to what OF think it is. */
- if (pci_to_OF_bus_map)
- busnr = pci_to_OF_bus_map[busnr];
- if (busnr == 0xff)
- return NULL;
-
- /* Now, lookup childs of the hose */
- return scan_OF_childs_for_device(node->child, busnr, devfn);
-}
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-
-struct device_node*
-pci_device_to_OF_node(struct pci_dev *dev)
-{
- return pci_busdev_to_OF_node(dev->bus, dev->devfn);
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
-/* This routine is meant to be used early during boot, when the
- * PCI bus numbers have not yet been assigned, and you need to
- * issue PCI config cycles to an OF device.
- * It could also be used to "fix" RTAS config cycles if you want
- * to set pci_assign_all_buses to 1 and still use RTAS for PCI
- * config cycles.
- */
-struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
-{
- if (!have_of)
- return NULL;
- while(node) {
- struct pci_controller* hose;
- for (hose=hose_head;hose;hose=hose->next)
- if (hose->arch_data == node)
- return hose;
- node=node->parent;
- }
- return NULL;
-}
-
-static int
-find_OF_pci_device_filter(struct device_node* node, void* data)
-{
- return ((void *)node == data);
-}
-
-/*
- * Returns the PCI device matching a given OF node
- */
-int
-pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
-{
- unsigned int *reg;
- struct pci_controller* hose;
- struct pci_dev* dev = NULL;
-
- if (!have_of)
- return -ENODEV;
- /* Make sure it's really a PCI device */
- hose = pci_find_hose_for_OF_device(node);
- if (!hose || !hose->arch_data)
- return -ENODEV;
- if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
- find_OF_pci_device_filter, (void *)node))
- return -ENODEV;
- reg = (unsigned int *) get_property(node, "reg", NULL);
- if (!reg)
- return -ENODEV;
- *bus = (reg[0] >> 16) & 0xff;
- *devfn = ((reg[0] >> 8) & 0xff);
-
- /* Ok, here we need some tweak. If we have already renumbered
- * all busses, we can't rely on the OF bus number any more.
- * the pci_to_OF_bus_map is not enough as several PCI busses
- * may match the same OF bus number.
- */
- if (!pci_to_OF_bus_map)
- return 0;
-
- for_each_pci_dev(dev)
- if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
- dev->devfn == *devfn) {
- *bus = dev->bus->number;
- pci_dev_put(dev);
- return 0;
- }
-
- return -ENODEV;
-}
-EXPORT_SYMBOL(pci_device_from_OF_node);
-
-void __init
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary)
-{
- static unsigned int static_lc_ranges[256] __initdata;
- unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
- unsigned int size;
- int rlen = 0, orig_rlen;
- int memno = 0;
- struct resource *res;
- int np, na = prom_n_addr_cells(dev);
- np = na + 5;
-
- /* First we try to merge ranges to fix a problem with some pmacs
- * that can have more than 3 ranges, fortunately using contiguous
- * addresses -- BenH
- */
- dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
- if (!dt_ranges)
- return;
- /* Sanity check, though hopefully that never happens */
- if (rlen > sizeof(static_lc_ranges)) {
- printk(KERN_WARNING "OF ranges property too large !\n");
- rlen = sizeof(static_lc_ranges);
- }
- lc_ranges = static_lc_ranges;
- memcpy(lc_ranges, dt_ranges, rlen);
- orig_rlen = rlen;
-
- /* Let's work on a copy of the "ranges" property instead of damaging
- * the device-tree image in memory
- */
- ranges = lc_ranges;
- prev = NULL;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if (prev) {
- if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
- (prev[2] + prev[na+4]) == ranges[2] &&
- (prev[na+2] + prev[na+4]) == ranges[na+2]) {
- prev[na+4] += ranges[na+4];
- ranges[0] = 0;
- ranges += np;
- continue;
- }
- }
- prev = ranges;
- ranges += np;
- }
-
- /*
- * The ranges property is laid out as an array of elements,
- * each of which comprises:
- * cells 0 - 2: a PCI address
- * cells 3 or 3+4: a CPU physical address
- * (size depending on dev->n_addr_cells)
- * cells 4+5 or 5+6: the size of the range
- */
- ranges = lc_ranges;
- rlen = orig_rlen;
- while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
- res = NULL;
- size = ranges[na+4];
- switch ((ranges[0] >> 24) & 0x3) {
- case 1: /* I/O space */
- if (ranges[2] != 0)
- break;
- hose->io_base_phys = ranges[na+2];
- /* limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
- hose->io_base_virt = ioremap(ranges[na+2], size);
- if (primary)
- isa_io_base = (unsigned long) hose->io_base_virt;
- res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = ranges[2];
- DBG("PCI: IO 0x%lx -> 0x%lx\n",
- res->start, res->start + size - 1);
- break;
- case 2: /* memory space */
- memno = 0;
- if (ranges[1] == 0 && ranges[2] == 0
- && ranges[na+4] <= (16 << 20)) {
- /* 1st 16MB, i.e. ISA memory area */
- if (primary)
- isa_mem_base = ranges[na+2];
- memno = 1;
- }
- while (memno < 3 && hose->mem_resources[memno].flags)
- ++memno;
- if (memno == 0)
- hose->pci_mem_offset = ranges[na+2] - ranges[2];
- if (memno < 3) {
- res = &hose->mem_resources[memno];
- res->flags = IORESOURCE_MEM;
- if(ranges[0] & 0x40000000)
- res->flags |= IORESOURCE_PREFETCH;
- res->start = ranges[na+2];
- DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
- res->start, res->start + size - 1);
- }
- break;
- }
- if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
- }
- ranges += np;
- }
-}
-
-/* We create the "pci-OF-bus-map" property now so it appears in the
- * /proc device tree
- */
-void __init
-pci_create_OF_bus_map(void)
-{
- struct property* of_prop;
-
- of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
- if (of_prop && find_path_device("/")) {
- memset(of_prop, -1, sizeof(struct property) + 256);
- of_prop->name = "pci-OF-bus-map";
- of_prop->length = 256;
- of_prop->value = (unsigned char *)&of_prop[1];
- prom_add_property(find_path_device("/"), of_prop);
- }
-}
-
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pdev;
- struct device_node *np;
-
- pdev = to_pci_dev (dev);
- np = pci_device_to_OF_node(pdev);
- if (np == NULL || np->full_name == NULL)
- return 0;
- return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
-#else /* CONFIG_PPC_OF */
void pcibios_make_OF_bus_map(void)
{
}
-#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
void pcibios_add_platform_entries(struct pci_dev *pdev)
{
-#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_OF */
}
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
index 2f5c7650274f..eabac6cad1f5 100644
--- a/arch/ppc/kernel/ppc_htab.c
+++ b/arch/ppc/kernel/ppc_htab.c
@@ -104,7 +104,7 @@ static char *pmc2_lookup(unsigned long mmcr0)
static int ppc_htab_show(struct seq_file *m, void *v)
{
unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
+#if defined(CONFIG_PPC_STD_MMU)
unsigned int kptes = 0, uptes = 0;
PTE *ptr;
#endif /* CONFIG_PPC_STD_MMU */
@@ -133,7 +133,6 @@ static int ppc_htab_show(struct seq_file *m, void *v)
return 0;
}
-#ifndef CONFIG_PPC64BRIDGE
for (ptr = Hash; ptr < Hash_end; ptr++) {
unsigned int mctx, vsid;
@@ -147,7 +146,6 @@ static int ppc_htab_show(struct seq_file *m, void *v)
else
uptes++;
}
-#endif
seq_printf(m,
"PTE Hash Table Information\n"
@@ -155,20 +153,16 @@ static int ppc_htab_show(struct seq_file *m, void *v)
"Buckets\t\t: %lu\n"
"Address\t\t: %08lx\n"
"Entries\t\t: %lu\n"
-#ifndef CONFIG_PPC64BRIDGE
"User ptes\t: %u\n"
"Kernel ptes\t: %u\n"
"Percent full\t: %lu%%\n"
-#endif
, (unsigned long)(Hash_size>>10),
(Hash_size/(sizeof(PTE)*8)),
(unsigned long)Hash,
Hash_size/sizeof(PTE)
-#ifndef CONFIG_PPC64BRIDGE
, uptes,
kptes,
((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-#endif
);
seq_printf(m,
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 683e028000e9..865ba74991a9 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -29,7 +29,6 @@
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
-#include <asm/prom.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
@@ -207,27 +206,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_OF
-EXPORT_SYMBOL(find_devices);
-EXPORT_SYMBOL(find_type_devices);
-EXPORT_SYMBOL(find_compatible_devices);
-EXPORT_SYMBOL(find_path_device);
-EXPORT_SYMBOL(device_is_compatible);
-EXPORT_SYMBOL(machine_is_compatible);
-EXPORT_SYMBOL(find_all_nodes);
-EXPORT_SYMBOL(get_property);
-EXPORT_SYMBOL(request_OF_resource);
-EXPORT_SYMBOL(release_OF_resource);
-EXPORT_SYMBOL(of_find_node_by_name);
-EXPORT_SYMBOL(of_find_node_by_type);
-EXPORT_SYMBOL(of_find_compatible_node);
-EXPORT_SYMBOL(of_find_node_by_path);
-EXPORT_SYMBOL(of_find_all_nodes);
-EXPORT_SYMBOL(of_get_parent);
-EXPORT_SYMBOL(of_get_next_child);
-EXPORT_SYMBOL(of_node_get);
-EXPORT_SYMBOL(of_node_put);
-#endif /* CONFIG_PPC_OF */
#if defined(CONFIG_BOOTX_TEXT)
EXPORT_SYMBOL(btext_update_display);
#endif
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 53e9deacee82..7eb91a2e818a 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -1,5 +1,5 @@
/*
- * Common prep/chrp boot and setup code.
+ * Common prep boot and setup code.
*/
#include <linux/config.h>
@@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-
+#ifdef CONFIG_PPC_PREP
extern void prep_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
-extern void chrp_init(unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, unsigned long r7);
dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_PREP */
int have_of;
EXPORT_SYMBOL(have_of);
@@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5)
identify_cpu(offset, 0);
do_cpu_ftr_fixups(offset);
-#if defined(CONFIG_PPC_OF)
- reloc_got2(offset);
-
- /*
- * don't do anything on prep
- * for now, don't use bootinfo because it breaks yaboot 0.5
- * and assume that if we didn't find a magic number, we have OF
- */
- if (*(unsigned long *)(0) != 0xdeadc0de)
- phys = prom_init(r3, r4, (prom_entry)r5);
-
- reloc_got2(-offset);
-#endif
-
return phys;
}
-#ifdef CONFIG_PPC_OF
-/*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
- */
-int
-of_show_percpuinfo(struct seq_file *m, int i)
-{
- struct device_node *cpu_node;
- u32 *fp;
- int s;
-
- cpu_node = find_type_devices("cpu");
- if (!cpu_node)
- return 0;
- for (s = 0; s < i && cpu_node->next; s++)
- cpu_node = cpu_node->next;
- fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
- if (fp)
- seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
- return 0;
-}
-
-void __init
-intuit_machine_type(void)
-{
- char *model;
- struct device_node *root;
-
- /* ask the OF info if we're a chrp or pmac */
- root = find_path_device("/");
- if (root != 0) {
- /* assume pmac unless proven to be chrp -- Cort */
- _machine = _MACH_Pmac;
- model = get_property(root, "device_type", NULL);
- if (model && !strncmp("chrp", model, 4))
- _machine = _MACH_chrp;
- else {
- model = get_property(root, "model", NULL);
- if (model && !strncmp(model, "IBM", 3))
- _machine = _MACH_chrp;
- }
- }
-}
-#endif
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
/*
- * The PPC_MULTIPLATFORM version of platform_init...
+ * The PPC_PREP version of platform_init...
*/
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
parse_bootinfo(find_bootinfo());
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init(r3, r4, r5, r6, r7);
- return;
- }
-#endif
-
-#ifdef CONFIG_PPC_OF
- have_of = 1;
-
- /* prom_init has already been called from __start */
- if (boot_infos)
- relocate_nodes();
-
- /* If we aren't PReP, we can find out if we're Pmac
- * or CHRP with this. */
- if (_machine == 0)
- intuit_machine_type();
-
- /* finish_device_tree may need _machine defined. */
- finish_device_tree();
-
- /*
- * If we were booted via quik, r3 points to the physical
- * address of the command-line parameters.
- * If we were booted from an xcoff image (i.e. netbooted or
- * booted from floppy), we get the command line from the
- * bootargs property of the /chosen node.
- * If an initial ramdisk is present, r3 and r4
- * are used for initrd_start and initrd_size,
- * otherwise they contain 0xdeadbeef.
- */
- if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
- strlcpy(cmd_line, (char *)r3 + KERNELBASE,
- sizeof(cmd_line));
- } else if (boot_infos != 0) {
- /* booted by BootX - check for ramdisk */
- if (boot_infos->kernelParamsOffset != 0)
- strlcpy(cmd_line, (char *) boot_infos
- + boot_infos->kernelParamsOffset,
- sizeof(cmd_line));
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_infos->ramDisk) {
- initrd_start = (unsigned long) boot_infos
- + boot_infos->ramDisk;
- initrd_end = initrd_start + boot_infos->ramDiskSize;
- initrd_below_start_ok = 1;
- }
-#endif
- } else {
- struct device_node *chosen;
- char *p;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (r3 && r4 && r4 != 0xdeadbeef) {
- if (r3 < KERNELBASE)
- r3 += KERNELBASE;
- initrd_start = r3;
- initrd_end = r3 + r4;
- ROOT_DEV = Root_RAM0;
- initrd_below_start_ok = 1;
- }
-#endif
- chosen = find_devices("chosen");
- if (chosen != NULL) {
- p = get_property(chosen, "bootargs", NULL);
- if (p && *p) {
- strlcpy(cmd_line, p, sizeof(cmd_line));
- }
- }
- }
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init(r3, r4, r5, r6, r7);
- break;
-#endif
- }
-#endif /* CONFIG_PPC_OF */
+ prep_init(r3, r4, r5, r6, r7);
}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_PPC_OF
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout;
- char *name;
- int offset = 0;
-
- if (of_stdout_device == NULL)
- return -ENODEV;
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console="))
- return -EBUSY;
-
- prom_stdout = find_path_device(of_stdout_device);
- if (!prom_stdout)
- return -ENODEV;
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name)
- return -ENODEV;
-
- if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- return -ENODEV;
- }
- }
- } else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
- else
- return -ENODEV;
- return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_PREP */
struct bi_record *find_bootinfo(void)
{
@@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec)
initrd_end = data[0] + data[1] + KERNELBASE;
break;
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_MULTIPLATFORM
- case BI_MACHTYPE:
- /* Machine types changed with the merge. Since the
- * bootinfo are now deprecated, we can just hard code
- * the appropriate conversion here for when we are
- * called with yaboot which passes us a machine type
- * this way.
- */
- switch(data[0]) {
- case 1: _machine = _MACH_prep; break;
- case 2: _machine = _MACH_Pmac; break;
- case 4: _machine = _MACH_chrp; break;
- default:
- _machine = data[0];
- }
- break;
-#endif
case BI_MEMSIZE:
boot_mem_size = data[0];
break;
@@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
#ifdef CONFIG_6xx
ppc_md.power_save = ppc6xx_idle;
#endif
-#ifdef CONFIG_POWER4
- ppc_md.power_save = power4_idle;
-#endif
platform_init(r3, r4, r5, r6, r7);
@@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p)
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}