[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus.

This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.

Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.

This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*.  The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices.  Only the bootloader (or
ppcboot) will need xparameters directly.

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 42 insertions, 46 deletions

diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
index bbb12c0c0b2c..133a83147199 100644
--- a/arch/ppc/platforms/4xx/virtex.c
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -1,60 +1,56 @@
 /*
- * arch/ppc/platforms/4xx/virtex.c
+ * Virtex-II Pro & Virtex-4 FX common infrastructure
  *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ * Maintainer: Grant Likely <grant.likely@secretlab.ca>
  *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * Copyright 2005 Secret Lab Technologies Ltd.
+ * Copyright 2005 General Dynamics Canada Ltd.
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
-#include <asm/ocp.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <asm/ppc_sys.h>
 #include <platforms/4xx/virtex.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+#define XPAR_UART(num) { \
+		.mapbase  = XPAR_UARTNS550_##num##_BASEADDR + 3, \
+		.irq	  = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+		.iotype	  = UPIO_MEM, \
+		.uartclk  = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
+		.flags	  = UPF_BOOT_AUTOCONF, \
+		.regshift = 2, \
+	}
 
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
+struct plat_serial8250_port serial_platform_data[] = {
 #ifdef XPAR_UARTNS550_0_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= XPAR_UARTNS550_0_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_0_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
+	XPAR_UART(0),
+#endif
 #ifdef XPAR_UARTNS550_1_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= XPAR_UARTNS550_1_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_1_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
+	XPAR_UART(1),
+#endif
 #ifdef XPAR_UARTNS550_2_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= XPAR_UARTNS550_2_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_2_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
+	XPAR_UART(2),
+#endif
 #ifdef XPAR_UARTNS550_3_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 3,
-	  .paddr	= XPAR_UARTNS550_3_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_3_VEC_ID,
-	  .pm		= OCP_CPM_NA
+	XPAR_UART(3),
+#endif
+	{ }, /* terminated by empty record */
+};
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[VIRTEX_UART] = {
+		.name		= "serial8250",
+		.id		= 0,
+		.dev.platform_data = serial_platform_data,
 	},
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif			/* 4 */
-#endif			/* 3 */
-#endif			/* 2 */
-#endif			/* 1 */
-#endif			/* 0 */
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
 };
+