[PATCH] ppc32: Update board-specific code of the CPM UART users

This has the relevant updates/additions to the BSP code so that proper
platform_info struct well be passed to the CPM UART drivers. The changes
covered mpc866ads, mpc885ads and mpc8272ads.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 131 insertions, 0 deletions

diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index 50a99e5f7c68..4b88679cd31c 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 
 #include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
 #include <linux/mii.h>
 
 #include <asm/delay.h>
@@ -35,9 +36,32 @@
 #include <asm/ppc_sys.h>
 
 extern unsigned char __res[];
+static void setup_smc1_ioports(void);
+static void setup_smc2_ioports(void);
 
 static void __init mpc885ads_scc_phy_init(char);
 
+static struct fs_uart_platform_info mpc885_uart_pdata[] = {
+	[fsid_smc1_uart] = {
+		.brg		= 1,
+ 		.fs_no 		= fsid_smc1_uart,
+ 		.init_ioports	= setup_smc1_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
+ 	[fsid_smc2_uart] = {
+ 		.brg		= 2,
+ 		.fs_no 		= fsid_smc2_uart,
+ 		.init_ioports	= setup_smc2_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
+};
+
 static struct fs_mii_bus_info fec_mii_bus_info = {
 	.method = fsmii_fec,
 	.id = 0,
@@ -116,6 +140,8 @@ void __init board_init(void)
 #ifdef CONFIG_SERIAL_CPM_SMC1
 	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
 	clrbits32(bcsr_io, BCSR1_RS232EN_1);
+        cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
+        cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	setbits32(bcsr_io,BCSR1_RS232EN_1);
 	cp->cp_smc[0].smc_smcmr = 0;
@@ -126,6 +152,8 @@ void __init board_init(void)
 	cp->cp_simode &= ~(0xe0000000 >> 1);
 	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
 	clrbits32(bcsr_io,BCSR1_RS232EN_2);
+        cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
+        cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	setbits32(bcsr_io,BCSR1_RS232EN_2);
 	cp->cp_smc[1].smc_smcmr = 0;
@@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr)
 	out_be32(&fecp->fec_mii_speed, 0);
 }
 
+static void setup_smc1_ioports(void)
+{
+        immap_t *immap = (immap_t *) IMAP_ADDR;
+        unsigned *bcsr_io;
+        unsigned int iobits = 0x000000c0;
+
+        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+        if (bcsr_io == NULL) {
+                printk(KERN_CRIT "Could not remap BCSR1\n");
+                return;
+        }
+        clrbits32(bcsr_io,BCSR1_RS232EN_1);
+        iounmap(bcsr_io);
+
+        setbits32(&immap->im_cpm.cp_pbpar, iobits);
+        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+}
+
+static void setup_smc2_ioports(void)
+{
+        immap_t *immap = (immap_t *) IMAP_ADDR;
+        unsigned *bcsr_io;
+        unsigned int iobits = 0x00000c00;
+
+        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+        if (bcsr_io == NULL) {
+                printk(KERN_CRIT "Could not remap BCSR1\n");
+                return;
+        }
+        clrbits32(bcsr_io,BCSR1_RS232EN_2);
+        iounmap(bcsr_io);
+
+#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
+        setbits32(&immap->im_cpm.cp_pbpar, iobits);
+        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+#else
+        setbits16(&immap->im_ioport.iop_papar, iobits);
+        clrbits16(&immap->im_ioport.iop_padir, iobits);
+        clrbits16(&immap->im_ioport.iop_paodr, iobits);
+#endif
+}
+
+static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
+                                              int idx)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+	int num = ARRAY_SIZE(mpc885_uart_pdata);
+
+	int id = fs_uart_id_smc2fsid(idx);
+
+	/* no need to alter anything if console */
+	if ((id <= num) && (!pdev->dev.platform_data)) {
+		pinfo = &mpc885_uart_pdata[id];
+		pinfo->uart_clk = bd->bi_intfreq;
+		pdev->dev.platform_data = pinfo;
+	}
+}
+
+
 static int mpc885ads_platform_notify(struct device *dev)
 {
 
@@ -356,12 +448,17 @@ static int mpc885ads_platform_notify(struct device *dev)
 			.rtn = mpc885ads_fixup_scc_enet_pdata,
 		},
 		{
+			.bus_id = "fsl-cpm-smc:uart",
+			.rtn = mpc885ads_fixup_uart_pdata
+		},
+		{
 			.bus_id = NULL
 		}
 	};
 
 	platform_notify_map(dev_map,dev);
 
+	return 0;
 }
 
 int __init mpc885ads_init(void)
@@ -383,7 +480,41 @@ int __init mpc885ads_init(void)
 	ppc_sys_device_enable(MPC8xx_CPM_FEC2);
 #endif
 
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
+#endif
 	return 0;
 }
 
 arch_initcall(mpc885ads_init);
+
+/*
+   To prevent confusion, console selection is gross:
+   by 0 assumed SMC1 and by 1 assumed SMC2
+ */
+struct platform_device* early_uart_get_pdev(int index)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+
+	struct platform_device* pdev = NULL;
+	if(index) { /*assume SMC2 here*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
+		pinfo = &mpc885_uart_pdata[1];
+	} else { /*over SMC1*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
+		pinfo = &mpc885_uart_pdata[0];
+	}
+
+	pinfo->uart_clk = bd->bi_intfreq;
+	pdev->dev.platform_data = pinfo;
+	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+	return NULL;
+}
+