diff options
| author |   Linus Walleij <linus.walleij@linaro.org> | 2018-12-02 09:43:18 +0100 |
|---|---|---|
| committer |   Ulf Hansson <ulf.hansson@linaro.org> | 2018-12-17 08:26:24 +0100 |
| commit | 5716fb9bd9c6d3e56da07d6ed219dfcfce7d7006 (patch) | |
| tree | 6e9b2496a59427fb423fab35e87bacce07df0a7d /arch/sh/boards/mach-ecovec24/setup.c | |
| parent | mmc: meson-mx-sdio: check devm_kasprintf for failure (diff) | |
| download | linux-dev-5716fb9bd9c6d3e56da07d6ed219dfcfce7d7006.tar.xz linux-dev-5716fb9bd9c6d3e56da07d6ed219dfcfce7d7006.zip | |
mmc: spi: Convert to use GPIO descriptors
Switch the SPI MMC driver to use GPIO descriptors internally
and just look those up using the standard slot GPIO
functions mmc_gpiod_request_cd() and mmc_gpiod_request_ro().
Make sure to request index 0 and 1 in accordance with the
SPI MMC DT binding, and add the same GPIOs in machine
descriptor tables on all boards that use SPI MMC in
board files.
The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().
Cc: Hartley Sweeten <hsweeten@visionengravers.com> # Vision EP9307
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to '')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 06a894526a0b..3097307b7cb7 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -776,9 +776,19 @@ static struct mmc_spi_platform_data mmc_spi_info = { .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */ .setpower = mmc_spi_setpower, - .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, - .cd_gpio = GPIO_PTY7, - .ro_gpio = GPIO_PTY6, +}; + +static struct gpiod_lookup_table mmc_spi_gpio_table = { + .dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */ + .table = { + /* Card detect */ + GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0, + GPIO_ACTIVE_LOW), + /* Write protect */ + GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1, + GPIO_ACTIVE_HIGH), + { }, + }, }; static struct spi_board_info spi_bus[] = { @@ -1282,6 +1292,7 @@ static int __init arch_setup(void) gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ + gpiod_add_lookup_table(&mmc_spi_gpio_table); spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); #endif |