Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 300 insertions, 0 deletions

diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
new file mode 100644
index 000000000000..faaf3d95e6cf
--- /dev/null
+++ b/arch/v850/kernel/rte_me2_cb.c
@@ -0,0 +1,300 @@
+/*
+ * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/me2.h>
+#include <asm/rte_me2_cb.h>
+#include <asm/machdep.h>
+#include <asm/v850e_intc.h>
+#include <asm/v850e_cache.h>
+#include <asm/irq.h>
+
+#include "mach.h"
+
+extern unsigned long *_intv_start;
+extern unsigned long *_intv_end;
+
+/* LED access routines.  */
+extern unsigned read_leds (int pos, char *buf, int len);
+extern unsigned write_leds (int pos, const char *buf, int len);
+
+
+/* SDRAM are almost contiguous (with a small hole in between;
+   see mach_reserve_bootmem for details), so just use both as one big area.  */
+#define RAM_START 	SDRAM_ADDR
+#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
+
+
+void __init mach_get_physical_ram (unsigned long *ram_start,
+				   unsigned long *ram_len)
+{
+	*ram_start = RAM_START;
+	*ram_len = RAM_END - RAM_START;
+}
+
+void mach_gettimeofday (struct timespec *tv)
+{
+	tv->tv_sec = 0;
+	tv->tv_nsec = 0;
+}
+
+/* Called before configuring an on-chip UART.  */
+void rte_me2_cb_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud)
+{
+	/* The RTE-V850E/ME2-CB connects some general-purpose I/O
+	   pins on the CPU to the RTS/CTS lines of UARTB channel 0's
+	   serial connection.
+	   I/O pins P21 and P22 are RTS and CTS respectively.  */
+	if (chan == 0) {
+		/* Put P21 & P22 in I/O port mode.  */
+		ME2_PORT2_PMC &= ~0x6;
+		/* Make P21 and output, and P22 an input.  */
+		ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
+	}
+
+	me2_uart_pre_configure (chan, cflags, baud);
+}
+
+void __init mach_init_irqs (void)
+{
+	/* Initialize interrupts.  */
+	me2_init_irqs ();
+	rte_me2_cb_init_irqs ();
+}
+
+#ifdef CONFIG_ROM_KERNEL
+/* Initialization for kernel in ROM.  */
+static inline rom_kernel_init (void)
+{
+	/* If the kernel is in ROM, we have to copy any initialized data
+	   from ROM into RAM.  */
+	extern unsigned long _data_load_start, _sdata, _edata;
+	register unsigned long *src = &_data_load_start;
+	register unsigned long *dst = &_sdata, *end = &_edata;
+
+	while (dst != end)
+		*dst++ = *src++;
+}
+#endif /* CONFIG_ROM_KERNEL */
+
+static void install_interrupt_vectors (void)
+{
+	unsigned long *p1, *p2;
+
+	ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
+
+	/* vector copy to iRAM */
+	p1 = (unsigned long *)0; /* v85x vector start */
+	p2 = (unsigned long *)&_intv_start;
+	while (p2 < (unsigned long *)&_intv_end)
+		*p1++ = *p2++;
+
+	ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
+}
+
+/* CompactFlash */
+
+static void cf_power_on (void)
+{
+	/* CF card detected? */
+	if (CB_CF_STS0 & 0x0030)
+		return;
+
+	CB_CF_REG0 = 0x0002; /* reest on */
+	mdelay (10);
+	CB_CF_REG0 = 0x0003; /* power on */
+	mdelay (10);
+	CB_CF_REG0 = 0x0001; /* reset off */
+	mdelay (10);
+}
+
+static void cf_power_off (void)
+{
+	CB_CF_REG0 = 0x0003; /* power on */
+	mdelay (10);
+	CB_CF_REG0 = 0x0002; /* reest on */
+	mdelay (10);
+}
+
+void __init mach_early_init (void)
+{
+	install_interrupt_vectors ();
+
+	/* CS1 SDRAM instruction cache enable */
+	v850e_cache_enable (0x04, 0x03, 0);
+
+	rte_cb_early_init ();
+
+	/* CompactFlash power on */
+	cf_power_on ();
+
+#if defined (CONFIG_ROM_KERNEL)
+	rom_kernel_init ();
+#endif
+}
+
+
+/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
+
+static struct cb_pic_irq_init cb_pic_irq_inits[] = {
+	{ "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
+	{ "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
+	{ "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
+	{ "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
+	{ "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
+	{ "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
+	{ "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
+	{ "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
+	{ "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
+	{ "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
+	{ 0 }
+};
+#define NUM_CB_PIC_IRQ_INITS  \
+   ((sizeof cb_pic_irq_inits / sizeof cb_pic_irq_inits[0]) - 1)
+
+static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
+static unsigned char cb_pic_active_irqs = 0;
+
+void __init rte_me2_cb_init_irqs (void)
+{
+	cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
+
+	/* Initalize on board PIC1 (not PIC0) enable */
+	CB_PIC_INT0M  = 0x0000;
+	CB_PIC_INT1M  = 0x0000;
+	CB_PIC_INTR   = 0x0000;
+	CB_PIC_INTEN |= CB_PIC_INT1EN;
+
+	ME2_PORT2_PMC 	 |= 0x08;	/* INTP23/SCK1 mode */
+	ME2_PORT2_PFC 	 &= ~0x08;	/* INTP23 mode */
+	ME2_INTR(2) 	 &= ~0x08;	/* INTP23 falling-edge detect */
+	ME2_INTF(2) 	 &= ~0x08;	/*   " */
+
+	rte_cb_init_irqs ();	/* gbus &c */
+}
+
+
+/* Enable interrupt handling for interrupt IRQ.  */
+void cb_pic_enable_irq (unsigned irq)
+{
+	CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
+}
+
+void cb_pic_disable_irq (unsigned irq)
+{
+	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
+}
+
+void cb_pic_shutdown_irq (unsigned irq)
+{
+	cb_pic_disable_irq (irq);
+
+	if (--cb_pic_active_irqs == 0)
+		free_irq (IRQ_CB_PIC, 0);
+
+	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
+}
+
+static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
+				      struct pt_regs *regs)
+{
+	irqreturn_t rval = IRQ_NONE;
+	unsigned status = CB_PIC_INTR;
+	unsigned enable = CB_PIC_INT1M;
+
+	/* Only pay attention to enabled interrupts.  */
+	status &= enable;
+
+	CB_PIC_INTEN &= ~CB_PIC_INT1EN;
+
+	if (status) {
+		unsigned mask = 1;
+
+		irq = CB_PIC_BASE_IRQ;
+		do {
+			/* There's an active interrupt, find out which one,
+			   and call its handler.  */
+			while (! (status & mask)) {
+				irq++;
+				mask <<= 1;
+			}
+			status &= ~mask;
+
+			CB_PIC_INTR = mask;
+
+			/* Recursively call handle_irq to handle it. */
+			handle_irq (irq, regs);
+			rval = IRQ_HANDLED;
+		} while (status);
+	}
+
+	CB_PIC_INTEN |= CB_PIC_INT1EN;
+
+	return rval;
+}
+
+
+static void irq_nop (unsigned irq) { }
+
+static unsigned cb_pic_startup_irq (unsigned irq)
+{
+	int rval;
+
+	if (cb_pic_active_irqs == 0) {
+		rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
+				    SA_INTERRUPT, "cb_pic_handler", 0);
+		if (rval != 0)
+			return rval;
+	}
+
+	cb_pic_active_irqs++;
+
+	cb_pic_enable_irq (irq);
+
+	return 0;
+}
+
+/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
+				   struct hw_interrupt_type *hw_irq_types)
+{
+	struct cb_pic_irq_init *init;
+	for (init = inits; init->name; init++) {
+		struct hw_interrupt_type *hwit = hw_irq_types++;
+
+		hwit->typename = init->name;
+
+		hwit->startup  = cb_pic_startup_irq;
+		hwit->shutdown = cb_pic_shutdown_irq;
+		hwit->enable   = cb_pic_enable_irq;
+		hwit->disable  = cb_pic_disable_irq;
+		hwit->ack      = irq_nop;
+		hwit->end      = irq_nop;
+
+		/* Initialize kernel IRQ infrastructure for this interrupt.  */
+		init_irq_handlers(init->base, init->num, init->interval, hwit);
+	}
+}