aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86
diff options
context:
space:
mode:
authorSimon Arlott <simon@fire.lp0.eu>2007-10-20 01:13:56 +0200
committerAdrian Bunk <bunk@kernel.org>2007-10-20 01:13:56 +0200
commit27b46d7661dc720224813eb4f452e424f1bf3a9a (patch)
tree1683daefc5f245efa5a1c2a3808277b45d21ce72 /arch/x86
parentspelling fixes: arch/h8300/ (diff)
downloadlinux-dev-27b46d7661dc720224813eb4f452e424f1bf3a9a.tar.xz
linux-dev-27b46d7661dc720224813eb4f452e424f1bf3a9a.zip
spelling fixes: arch/i386/
Spelling fixes in arch/i386/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Adrian Bunk <bunk@kernel.org>
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/boot/compressed/misc_32.c4
-rw-r--r--arch/x86/kernel/acpi/boot.c8
-rw-r--r--arch/x86/kernel/apic_32.c4
-rw-r--r--arch/x86/kernel/apm_32.c2
-rw-r--r--arch/x86/kernel/cpu/amd.c2
-rw-r--r--arch/x86/kernel/cpu/centaur.c4
-rw-r--r--arch/x86/kernel/cpu/common.c2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/gx-suspmod.c8
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.h4
-rw-r--r--arch/x86/kernel/cpu/cyrix.c2
-rw-r--r--arch/x86/kernel/cpu/mtrr/cyrix.c4
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c2
-rw-r--r--arch/x86/kernel/cpu/mtrr/main.c2
-rw-r--r--arch/x86/kernel/e820_32.c2
-rw-r--r--arch/x86/kernel/hpet.c2
-rw-r--r--arch/x86/kernel/i8253.c2
-rw-r--r--arch/x86/kernel/io_apic_32.c4
-rw-r--r--arch/x86/kernel/mpparse_32.c2
-rw-r--r--arch/x86/kernel/ptrace_32.c2
-rw-r--r--arch/x86/kernel/setup_32.c2
-rw-r--r--arch/x86/kernel/signal_32.c2
-rw-r--r--arch/x86/kernel/smp_32.c4
-rw-r--r--arch/x86/kernel/smpboot_32.c2
-rw-r--r--arch/x86/kernel/summit_32.c2
-rw-r--r--arch/x86/kernel/tsc_32.c2
-rw-r--r--arch/x86/mach-default/setup.c2
-rw-r--r--arch/x86/mach-generic/default.c2
-rw-r--r--arch/x86/mach-generic/probe.c2
-rw-r--r--arch/x86/mach-voyager/voyager_smp.c12
-rw-r--r--arch/x86/mach-voyager/voyager_thread.c2
-rw-r--r--arch/x86/mm/boot_ioremap_32.c2
-rw-r--r--arch/x86/mm/discontig_32.c2
-rw-r--r--arch/x86/mm/fault_32.c4
-rw-r--r--arch/x86/oprofile/op_x86_model.h2
-rw-r--r--arch/x86/pci/irq.c4
37 files changed, 57 insertions, 57 deletions
diff --git a/arch/x86/boot/compressed/misc_32.c b/arch/x86/boot/compressed/misc_32.c
index b28505c544c9..1dc1e19c0a9f 100644
--- a/arch/x86/boot/compressed/misc_32.c
+++ b/arch/x86/boot/compressed/misc_32.c
@@ -25,7 +25,7 @@
/*
* Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analized.
+ * Worst case behaviours need to be analyzed.
* Background information:
*
* The file layout is:
@@ -94,7 +94,7 @@
* Adding 32768 instead of 32767 just makes for round numbers.
* Adding the decompressor_size is necessary as it musht live after all
* of the data as well. Last I measured the decompressor is about 14K.
- * 10K of actuall data and 4K of bss.
+ * 10K of actual data and 4K of bss.
*
*/
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index afd2afe9102d..25337f2b7399 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -99,7 +99,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
/*
* The default interrupt routing model is PIC (8259). This gets
- * overriden if IOAPICs are enumerated (below).
+ * overridden if IOAPICs are enumerated (below).
*/
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
@@ -414,8 +414,8 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end
*
* Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
* for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
- * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
- * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
*/
void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
@@ -427,7 +427,7 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
old = inb(0x4d0) | (inb(0x4d1) << 8);
/*
- * If we use ACPI to set PCI irq's, then we should clear ELCR
+ * If we use ACPI to set PCI IRQs, then we should clear ELCR
* since we will set it correctly as we enable the PCI irq
* routing.
*/
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 793341fffc81..08b07c176962 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -947,7 +947,7 @@ void __devinit setup_local_APIC(void)
* Set up LVT0, LVT1:
*
* set up through-local-APIC on the BP's LINT0. This is not
- * strictly necessery in pure symmetric-IO mode, but sometimes
+ * strictly necessary in pure symmetric-IO mode, but sometimes
* we delegate interrupts to the 8259A.
*/
/*
@@ -998,7 +998,7 @@ void __devinit setup_local_APIC(void)
} else {
if (esr_disable)
/*
- * Something untraceble is creating bad interrupts on
+ * Something untraceable is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 32f2365c26ed..17089a041028 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -57,7 +57,7 @@
* screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4
* 1.2a:Simple change to stop mysterious bug reports with SMP also added
* levels to the printk calls. APM is not defined for SMP machines.
- * The new replacment for it is, but Linux doesn't yet support this.
+ * The new replacement for it is, but Linux doesn't yet support this.
* Alan Cox Linux 2.1.55
* 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's
* 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 5f8af875f457..1ff88c7f45cf 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -266,7 +266,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
#ifdef CONFIG_X86_HT
/*
* On a AMD multi core setup the lower bits of the APIC id
- * distingush the cores.
+ * distinguish the cores.
*/
if (c->x86_max_cores > 1) {
int cpu = smp_processor_id();
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 473eac883c7b..9681fa15ddf0 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -53,7 +53,7 @@ static u32 __cpuinit ramtop(void) /* 16388 */
continue;
/*
* Don't MCR over reserved space. Ignore the ISA hole
- * we frob around that catastrophy already
+ * we frob around that catastrophe already
*/
if (e820.map[i].type == E820_RESERVED)
@@ -287,7 +287,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
c->x86_capability[5] = cpuid_edx(0xC0000001);
}
- /* Cyrix III family needs CX8 & PGE explicity enabled. */
+ /* Cyrix III family needs CX8 & PGE explicitly enabled. */
if (c->x86_model >=6 && c->x86_model <= 9) {
rdmsr (MSR_VIA_FCR, lo, hi);
lo |= (1<<1 | 1<<7);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d506201d397c..e2fcf2051bdb 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -207,7 +207,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
static int __init x86_fxsr_setup(char * s)
{
- /* Tell all the other CPU's to not use it... */
+ /* Tell all the other CPUs to not use it... */
disable_x86_fxsr = 1;
/*
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 32f0bda3fc95..f03e9153618e 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -260,7 +260,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
freqs.old = nforce2_get(policy->cpu);
freqs.new = target_fsb * fid * 100;
- freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */
+ freqs.cpu = 0; /* Only one CPU on nForce2 platforms */
if (freqs.old == freqs.new)
return 0;
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index ed2bda127c44..2ed7db2fd257 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -12,12 +12,12 @@
* of any nature resulting due to the use of this software. This
* software is provided AS-IS with no warranties.
*
- * Theoritical note:
+ * Theoretical note:
*
* (see Geode(tm) CS5530 manual (rev.4.1) page.56)
*
* CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
- * are based on Suspend Moduration.
+ * are based on Suspend Modulation.
*
* Suspend Modulation works by asserting and de-asserting the SUSP# pin
* to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
@@ -101,11 +101,11 @@
/* SUSCFG bits */
#define SUSMOD (1<<0) /* enable/disable suspend modulation */
-/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the belows support only with cs5530A */
+/* the below is supported only with cs5530A */
#define PWRSVE_ISA (1<<3) /* stop ISA clock */
#define PWRSVE (1<<4) /* active idle */
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c06ac680c9ca..9c36a53676b7 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -168,7 +168,7 @@ static void count_off_irt(struct powernow_k8_data *data)
return;
}
-/* the voltage stabalization time */
+/* the voltage stabilization time */
static void count_off_vst(struct powernow_k8_data *data)
{
udelay(data->vstable * VST_UNITS_20US);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index b06c812208ca..7c4f6e0faed4 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -148,10 +148,10 @@ struct powernow_k8_data {
#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */
-#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */
+#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */
/*
- * Most values of interest are enocoded in a single field of the _PSS
+ * Most values of interest are encoded in a single field of the _PSS
* entries: the "control" value.
*/
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 4aa2ff8d3c43..88d66fb8411d 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -256,7 +256,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
u32 vendor, device;
/* It isn't really a PCI quirk directly, but the cure is the
same. The MediaGX has deep magic SMM stuff that handles the
- SB emulation. It thows away the fifo on disable_dma() which
+ SB emulation. It throws away the fifo on disable_dma() which
is wrong and ruins the audio.
Bug2: VSA1 has a wrap bug so that using maximum sized DMA
diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index 2287d4863a8a..9964be3de2b7 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -147,10 +147,10 @@ static void prepare_set(void)
write_cr0(cr0);
wbinvd();
- /* Cyrix ARRs - everything else were excluded at the top */
+ /* Cyrix ARRs - everything else was excluded at the top */
ccr3 = getCx86(CX86_CCR3);
- /* Cyrix ARRs - everything else were excluded at the top */
+ /* Cyrix ARRs - everything else was excluded at the top */
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
}
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 56f64e34829f..992f08dfbb6c 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -182,7 +182,7 @@ static inline void k8_enable_fixed_iorrs(void)
/**
* Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also.
+ * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
* see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
* \param msr MSR address of the MTTR which should be checked and updated
* \param changed pointer which indicates whether the MTRR needed to be changed
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 5e4be30ff903..9abbdf7562c5 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -748,7 +748,7 @@ static int __init mtrr_init_finialize(void)
if (use_intel())
mtrr_state_warn();
else {
- /* The CPUs haven't MTRR and seemes not support SMP. They have
+ /* The CPUs haven't MTRR and seem to not support SMP. They have
* specific drivers, we use a tricky method to support
* suspend/resume for them.
* TBD: is there any system with such CPU which supports
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index d58039e8de74..58fd54eb5577 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -706,7 +706,7 @@ void __init e820_register_memory(void)
int i;
/*
- * Search for the bigest gap in the low 32 bits of the e820
+ * Search for the biggest gap in the low 32 bits of the e820
* memory space.
*/
last = 0x100000000ull;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index f8367074da0d..772afab8f196 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -350,7 +350,7 @@ static int hpet_clocksource_register(void)
*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
- * aproximated by mult/2^shift
+ * approximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 5cc8841ca2c6..a42c80745325 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -86,7 +86,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
* On UP the PIT can serve all of the possible timer functions. On SMP systems
* it can be solely used for the global tick.
*
- * The profiling and update capabilites are switched off once the local apic is
+ * The profiling and update capabilities are switched off once the local apic is
* registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
* !using_apic_timer decisions in do_timer_interrupt_hook()
*/
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 5f10c7189534..03e88fc00e5a 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -584,7 +584,7 @@ tryanotherirq:
imbalance = move_this_load;
- /* For physical_balance case, we accumlated both load
+ /* For physical_balance case, we accumulated both load
* values in the one of the siblings cpu_irq[],
* to use the same code for physical and logical processors
* as much as possible.
@@ -2472,7 +2472,7 @@ void destroy_irq(unsigned int irq)
}
/*
- * MSI mesage composition
+ * MSI message composition
*/
#ifdef CONFIG_PCI_MSI
static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
index 13abb4ebfb79..7a05a7f6099a 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse_32.c
@@ -1001,7 +1001,7 @@ void __init mp_config_acpi_legacy_irqs (void)
/*
* Use the default configuration for the IRQs 0-15. Unless
- * overriden by (MADT) interrupt source override entries.
+ * overridden by (MADT) interrupt source override entries.
*/
for (i = 0; i < 16; i++) {
int idx;
diff --git a/arch/x86/kernel/ptrace_32.c b/arch/x86/kernel/ptrace_32.c
index 99102ec5fade..ff5431cc03ee 100644
--- a/arch/x86/kernel/ptrace_32.c
+++ b/arch/x86/kernel/ptrace_32.c
@@ -632,7 +632,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
/* User-mode eip? */
info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL;
- /* Send us the fakey SIGTRAP */
+ /* Send us the fake SIGTRAP */
force_sig_info(SIGTRAP, &info, tsk);
}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 978dc0196a0f..18e6eaf138ce 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -624,7 +624,7 @@ void __init setup_arch(char **cmdline_p)
/*
* NOTE: before this point _nobody_ is allowed to allocate
* any memory using the bootmem allocator. Although the
- * alloctor is now initialised only the first 8Mb of the kernel
+ * allocator is now initialised only the first 8Mb of the kernel
* virtual address space has been mapped. All allocations before
* paging_init() has completed must use the alloc_bootmem_low_pages()
* variant (which allocates DMA'able memory) and care must be taken
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index 6dc394b87255..9bdd83022f5f 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -594,7 +594,7 @@ static void fastcall do_signal(struct pt_regs *regs)
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- /* Reenable any watchpoints before delivering the
+ /* Re-enable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
* inside the kernel.
diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c
index 791d9f8036ae..9ced828d5556 100644
--- a/arch/x86/kernel/smp_32.c
+++ b/arch/x86/kernel/smp_32.c
@@ -69,7 +69,7 @@
*
* B stepping CPUs may hang. There are hardware work arounds
* for this. We warn about it in case your board doesn't have the work
- * arounds. Basically thats so I can tell anyone with a B stepping
+ * arounds. Basically that's so I can tell anyone with a B stepping
* CPU and SMP problems "tough".
*
* Specific items [From Pentium Processor Specification Update]
@@ -273,7 +273,7 @@ void leave_mm(unsigned long cpu)
* 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
* Stop ipi delivery for the old mm. This is not synchronized with
* the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * for the wrong mm, and in the worst case we perform a superflous
+ * for the wrong mm, and in the worst case we perform a superfluous
* tlb flush.
* 1a2) set cpu_tlbstate to TLBSTATE_OK
* Now the smp_invalidate_interrupt won't call leave_mm if cpu0
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c
index be3faac04719..1b9ee68c98a2 100644
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot_32.c
@@ -412,7 +412,7 @@ static void __cpuinit start_secondary(void *unused)
/*
* We need to hold call_lock, so there is no inconsistency
* between the time smp_call_function() determines number of
- * IPI receipients, and the time when the determination is made
+ * IPI recipients, and the time when the determination is made
* for which cpus receive the IPI. Holding this
* lock helps us to not include this cpu in a currently in progress
* smp_call_function().
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 91c7acc8d999..72f463401592 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -64,7 +64,7 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
switch (rio_devs[wpeg_num]->type){
case CompatWPEG:
- /* The Compatability Winnipeg controls the 2 legacy buses,
+ /* The Compatibility Winnipeg controls the 2 legacy buses,
* the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
* a PCI-PCI bridge card is used in either slot: total 5 buses.
*/
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index e87a3939ed40..cb19df7aee0f 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -59,7 +59,7 @@ int check_tsc_unstable(void)
}
EXPORT_SYMBOL_GPL(check_tsc_unstable);
-/* Accellerators for sched_clock()
+/* Accelerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
* basic equation:
* ns = cycles / (freq / ns_per_sec)
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 47207ca71045..0c28a071824c 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -108,7 +108,7 @@ void __init time_init_hook(void)
* mca_nmi_hook - hook into MCA specific NMI chain
*
* Description:
- * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
* along the MCA bus. Use this to hook into that chain if you will need
* it.
**/
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 8685208d8512..1af0cc7648f0 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -1,5 +1,5 @@
/*
- * Default generic APIC driver. This handles upto 8 CPUs.
+ * Default generic APIC driver. This handles up to 8 CPUs.
*/
#define APIC_DEFINITION 1
#include <linux/threads.h>
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 4121d1551800..f410d3cb5659 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -56,7 +56,7 @@ void __init generic_bigsmp_probe(void)
/*
* This routine is used to switch to bigsmp mode when
* - There is no apic= option specified by the user
- * - generic_apic_probe() has choosen apic_default as the sub_arch
+ * - generic_apic_probe() has chosen apic_default as the sub_arch
* - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
*/
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index e4928aa6bdfb..c5f2692273e6 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -389,7 +389,7 @@ find_smp_config(void)
/* The boot CPU must be extended */
voyager_extended_vic_processors = 1<<boot_cpu_id;
- /* initially, all of the first 8 cpu's can boot */
+ /* initially, all of the first 8 CPUs can boot */
voyager_allowed_boot_processors = 0xff;
/* set up everything for just this CPU, we can alter
* this as we start the other CPUs later */
@@ -1010,7 +1010,7 @@ static struct call_data_struct * call_data;
/* execute a thread on a new CPU. The function to be called must be
* previously set up. This is used to schedule a function for
- * execution on all CPU's - set up the function then broadcast a
+ * execution on all CPUs - set up the function then broadcast a
* function_interrupt CPI to come here on each CPU */
static void
smp_call_function_interrupt(void)
@@ -1095,7 +1095,7 @@ voyager_smp_call_function_mask (cpumask_t cpumask,
* CPI here. We don't use this actually for counting so losing
* ticks doesn't matter
*
- * FIXME: For those CPU's which actually have a local APIC, we could
+ * FIXME: For those CPUs which actually have a local APIC, we could
* try to use it to trigger this interrupt instead of having to
* broadcast the timer tick. Unfortunately, all my pentium DYADs have
* no local APIC, so I can't do this
@@ -1287,7 +1287,7 @@ smp_local_timer_interrupt(void)
/*
* We take the 'long' return path, and there every subsystem
- * grabs the apropriate locks (kernel lock/ irq lock).
+ * grabs the appropriate locks (kernel lock/ irq lock).
*
* we might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
@@ -1759,7 +1759,7 @@ set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors;
if(cpus_addr(mask)[0] == 0)
- /* can't have no cpu's to accept the interrupt -- extremely
+ /* can't have no CPUs to accept the interrupt -- extremely
* bad things will happen */
return;
@@ -1791,7 +1791,7 @@ set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
}
/* this is magic, we now have the correct affinity maps, so
* enable the interrupt. This will send an enable CPI to
- * those cpu's who need to enable it in their local masks,
+ * those CPUs who need to enable it in their local masks,
* causing them to correct for the new affinity . If the
* interrupt is currently globally disabled, it will simply be
* disabled again as it comes in (voyager lazy disable). If
diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
index f9d595338159..50f9366c411e 100644
--- a/arch/x86/mach-voyager/voyager_thread.c
+++ b/arch/x86/mach-voyager/voyager_thread.c
@@ -64,7 +64,7 @@ check_from_kernel(void)
{
if(voyager_status.switch_off) {
- /* FIXME: This should be configureable via proc */
+ /* FIXME: This should be configurable via proc */
execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
} else if(voyager_status.power_fail) {
VDEBUG(("Voyager daemon detected AC power failure\n"));
diff --git a/arch/x86/mm/boot_ioremap_32.c b/arch/x86/mm/boot_ioremap_32.c
index 4de95a17a7d4..f14da2a53ece 100644
--- a/arch/x86/mm/boot_ioremap_32.c
+++ b/arch/x86/mm/boot_ioremap_32.c
@@ -10,7 +10,7 @@
/*
* We need to use the 2-level pagetable functions, but CONFIG_X86_PAE
- * keeps that from happenning. If anyone has a better way, I'm listening.
+ * keeps that from happening. If anyone has a better way, I'm listening.
*
* boot_pte_t is defined only if this all works correctly
*/
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 13893772cc48..fe608a45ffb6 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -273,7 +273,7 @@ unsigned long __init setup_memory(void)
* When mapping a NUMA machine we allocate the node_mem_map arrays
* from node local memory. They are then mapped directly into KVA
* between zone normal and vmalloc space. Calculate the size of
- * this space and use it to adjust the boundry between ZONE_NORMAL
+ * this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
find_max_pfn();
diff --git a/arch/x86/mm/fault_32.c b/arch/x86/mm/fault_32.c
index 4d3e538c57ab..d6181597a0a8 100644
--- a/arch/x86/mm/fault_32.c
+++ b/arch/x86/mm/fault_32.c
@@ -354,7 +354,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs,
/* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in the
- * kernel and should generate an OOPS. Unfortunatly, in the case of an
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
* erroneous fault occurring in a code path which already holds mmap_sem
* we will deadlock attempting to validate the fault against the
* address space. Luckily the kernel only validly references user
@@ -362,7 +362,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs,
* exceptions table.
*
* As the vast majority of faults will be valid we will only perform
- * the source reference check when there is a possibilty of a deadlock.
+ * the source reference check when there is a possibility of a deadlock.
* Attempt to lock the address space, if we cannot we then validate the
* source. If this is invalid we can skip the address space check,
* thus avoiding the deadlock.
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index abb1aa95b979..45b605fa71d0 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -29,7 +29,7 @@ struct op_msrs {
struct pt_regs;
/* The model vtable abstracts the differences between
- * various x86 CPU model's perfctr support.
+ * various x86 CPU models' perfctr support.
*/
struct op_x86_model_spec {
unsigned int const num_counters;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index c52150fdf82b..88d8f5c0ecb5 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -169,7 +169,7 @@ void eisa_set_level_irq(unsigned int irq)
}
/*
- * Common IRQ routing practice: nybbles in config space,
+ * Common IRQ routing practice: nibbles in config space,
* offset by some magic constant.
*/
static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
@@ -585,7 +585,7 @@ static __init int via_router_probe(struct irq_router *r,
/* FIXME: We should move some of the quirk fixup stuff here */
/*
- * work arounds for some buggy BIOSes
+ * workarounds for some buggy BIOSes
*/
if (device == PCI_DEVICE_ID_VIA_82C586_0) {
switch(router->device) {