xtensa: add test_kc705_hifi variant

This variant has HiFi3 coprocessor and is used in sample audio-enabled
configuration.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

1 files changed, 189 insertions, 0 deletions

diff --git a/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h
new file mode 100644
index 000000000000..e39fea64391e
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h
@@ -0,0 +1,189 @@
+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2014 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			2	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x82	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP1_NAME			"AudioEngineLX"
+#define XCHAL_CP1_IDENT			AudioEngineLX
+#define XCHAL_CP1_SA_SIZE		184	/* size of state save area */
+#define XCHAL_CP1_SA_ALIGN		8	/* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX	1	/* coprocessor ID (0..7) */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		36
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		240	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		8	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	9
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	26
+#define XCHAL_CP1_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,     ae_ovf_sar, 8, 4, 4,0x03F0,  ur,240,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_bithead, 4, 4, 4,0x03F1,  ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2,  ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,    ae_cw_sd_no, 4, 4, 4,0x03F3,  ur,243, 29,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_cbegin0, 4, 4, 4,0x03F6,  ur,246, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_cend0, 4, 4, 4,0x03F7,  ur,247, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed0, 8, 8, 8,0x1010, aed,0  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed1, 8, 8, 8,0x1011, aed,1  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed2, 8, 8, 8,0x1012, aed,2  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed3, 8, 8, 8,0x1013, aed,3  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed4, 8, 8, 8,0x1014, aed,4  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed5, 8, 8, 8,0x1015, aed,5  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed6, 8, 8, 8,0x1016, aed,6  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed7, 8, 8, 8,0x1017, aed,7  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed8, 8, 8, 8,0x1018, aed,8  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed9, 8, 8, 8,0x1019, aed,9  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed10, 8, 8, 8,0x101A, aed,10 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed11, 8, 8, 8,0x101B, aed,11 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed12, 8, 8, 8,0x101C, aed,12 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed13, 8, 8, 8,0x101D, aed,13 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed14, 8, 8, 8,0x101E, aed,14 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed15, 8, 8, 8,0x101F, aed,15 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u0, 8, 8, 8,0x1020,   u,0  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u1, 8, 8, 8,0x1021,   u,1  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u2, 8, 8, 8,0x1022,   u,2  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u3, 8, 8, 8,0x1023,   u,3  , 64,0,0,0)
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
+
+#endif /*_XTENSA_CORE_TIE_H*/