aboutsummaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorjohn stultz <johnstul@us.ibm.com>2007-03-05 00:30:50 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-03-05 07:57:53 -0800
commit6bb74df481223731af6c7e0ff3adb31f6442cfcd (patch)
tree2aa0b0cfa55cb4b9a9236bd94b723d83eb0bdaa8 /arch
parent[PATCH] x86_64: remove unusued 'flags' variable (diff)
downloadlinux-dev-6bb74df481223731af6c7e0ff3adb31f6442cfcd.tar.xz
linux-dev-6bb74df481223731af6c7e0ff3adb31f6442cfcd.zip
[PATCH] clocksource init adjustments (fix bug #7426)
This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/i386/kernel/hpet.c80
-rw-r--r--arch/i386/kernel/i8253.c2
-rw-r--r--arch/i386/kernel/setup.c1
-rw-r--r--arch/i386/kernel/time.c1
-rw-r--r--arch/i386/kernel/tsc.c83
-rw-r--r--arch/x86_64/kernel/hpet.c109
-rw-r--r--arch/x86_64/kernel/time.c2
-rw-r--r--arch/x86_64/kernel/tsc.c7
8 files changed, 124 insertions, 161 deletions
diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
index e1006b7acc9e..f3ab61ee7498 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/i386/kernel/hpet.c
@@ -201,12 +201,30 @@ static int hpet_next_event(unsigned long delta,
}
/*
+ * Clock source related code
+ */
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = HPET_MASK,
+ .shift = HPET_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
* Try to setup the HPET timer
*/
int __init hpet_enable(void)
{
unsigned long id;
uint64_t hpet_freq;
+ u64 tmp;
if (!is_hpet_capable())
return 0;
@@ -253,6 +271,25 @@ int __init hpet_enable(void)
/* Start the counter */
hpet_start_counter();
+ /* Initialize and register HPET clocksource
+ *
+ * hpet period is in femto seconds per cycle
+ * so we need to convert this to ns/cyc units
+ * aproximated by mult/2^shift
+ *
+ * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+ * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+ * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+ * (fsec/cyc << shift)/1000000 = mult
+ * (hpet_period << shift)/FSEC_PER_NSEC = mult
+ */
+ tmp = (u64)hpet_period << HPET_SHIFT;
+ do_div(tmp, FSEC_PER_NSEC);
+ clocksource_hpet.mult = (u32)tmp;
+
+ clocksource_register(&clocksource_hpet);
+
+
if (id & HPET_ID_LEGSUP) {
hpet_enable_int();
hpet_reserve_platform_timers(id);
@@ -273,49 +310,6 @@ out_nohpet:
return 0;
}
-/*
- * Clock source related code
- */
-static cycle_t read_hpet(void)
-{
- return (cycle_t)hpet_readl(HPET_COUNTER);
-}
-
-static struct clocksource clocksource_hpet = {
- .name = "hpet",
- .rating = 250,
- .read = read_hpet,
- .mask = HPET_MASK,
- .shift = HPET_SHIFT,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_hpet_clocksource(void)
-{
- u64 tmp;
-
- if (!hpet_virt_address)
- return -ENODEV;
-
- /*
- * hpet period is in femto seconds per cycle
- * so we need to convert this to ns/cyc units
- * aproximated by mult/2^shift
- *
- * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
- * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
- * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
- * (fsec/cyc << shift)/1000000 = mult
- * (hpet_period << shift)/FSEC_PER_NSEC = mult
- */
- tmp = (u64)hpet_period << HPET_SHIFT;
- do_div(tmp, FSEC_PER_NSEC);
- clocksource_hpet.mult = (u32)tmp;
-
- return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
#ifdef CONFIG_HPET_EMULATE_RTC
diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c
index a6bc7bb38834..5cbb776b3089 100644
--- a/arch/i386/kernel/i8253.c
+++ b/arch/i386/kernel/i8253.c
@@ -195,4 +195,4 @@ static int __init init_pit_clocksource(void)
clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
return clocksource_register(&clocksource_pit);
}
-module_init(init_pit_clocksource);
+arch_initcall(init_pit_clocksource);
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 122623dcc6e1..698c24fe482e 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -657,5 +657,4 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
- tsc_init();
}
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index ccd3734edb8f..94e5cb091104 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -279,5 +279,6 @@ void __init hpet_time_init(void)
*/
void __init time_init(void)
{
+ tsc_init();
late_time_init = choose_time_init();
}
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 59222a04234b..875d8a6ecc02 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -184,34 +184,6 @@ int recalibrate_cpu_khz(void)
EXPORT_SYMBOL(recalibrate_cpu_khz);
-void __init tsc_init(void)
-{
- if (!cpu_has_tsc || tsc_disable)
- goto out_no_tsc;
-
- cpu_khz = calculate_cpu_khz();
- tsc_khz = cpu_khz;
-
- if (!cpu_khz)
- goto out_no_tsc;
-
- printk("Detected %lu.%03lu MHz processor.\n",
- (unsigned long)cpu_khz / 1000,
- (unsigned long)cpu_khz % 1000);
-
- set_cyc2ns_scale(cpu_khz);
- use_tsc_delay();
- return;
-
-out_no_tsc:
- /*
- * Set the tsc_disable flag if there's no TSC support, this
- * makes it a fast flag for the kernel to see whether it
- * should be using the TSC.
- */
- tsc_disable = 1;
-}
-
#ifdef CONFIG_CPU_FREQ
/*
@@ -381,28 +353,47 @@ static void __init check_geode_tsc_reliable(void)
static inline void check_geode_tsc_reliable(void) { }
#endif
-static int __init init_tsc_clocksource(void)
+
+void __init tsc_init(void)
{
+ if (!cpu_has_tsc || tsc_disable)
+ goto out_no_tsc;
- if (cpu_has_tsc && tsc_khz && !tsc_disable) {
- /* check blacklist */
- dmi_check_system(bad_tsc_dmi_table);
+ cpu_khz = calculate_cpu_khz();
+ tsc_khz = cpu_khz;
- unsynchronized_tsc();
- check_geode_tsc_reliable();
- current_tsc_khz = tsc_khz;
- clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
- clocksource_tsc.shift);
- /* lower the rating if we already know its unstable: */
- if (check_tsc_unstable()) {
- clocksource_tsc.rating = 0;
- clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- }
+ if (!cpu_khz)
+ goto out_no_tsc;
- return clocksource_register(&clocksource_tsc);
+ printk("Detected %lu.%03lu MHz processor.\n",
+ (unsigned long)cpu_khz / 1000,
+ (unsigned long)cpu_khz % 1000);
+
+ set_cyc2ns_scale(cpu_khz);
+ use_tsc_delay();
+
+ /* Check and install the TSC clocksource */
+ dmi_check_system(bad_tsc_dmi_table);
+
+ unsynchronized_tsc();
+ check_geode_tsc_reliable();
+ current_tsc_khz = tsc_khz;
+ clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+ clocksource_tsc.shift);
+ /* lower the rating if we already know its unstable: */
+ if (check_tsc_unstable()) {
+ clocksource_tsc.rating = 0;
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
+ clocksource_register(&clocksource_tsc);
- return 0;
-}
+ return;
-module_init(init_tsc_clocksource);
+out_no_tsc:
+ /*
+ * Set the tsc_disable flag if there's no TSC support, this
+ * makes it a fast flag for the kernel to see whether it
+ * should be using the TSC.
+ */
+ tsc_disable = 1;
+}
diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c
index 65a0edd71a17..8cf0b8a13778 100644
--- a/arch/x86_64/kernel/hpet.c
+++ b/arch/x86_64/kernel/hpet.c
@@ -12,6 +12,12 @@
#include <asm/timex.h>
#include <asm/hpet.h>
+#define HPET_MASK 0xFFFFFFFF
+#define HPET_SHIFT 22
+
+/* FSEC = 10^-15 NSEC = 10^-9 */
+#define FSEC_PER_NSEC 1000000
+
int nohpet __initdata;
unsigned long hpet_address;
@@ -106,9 +112,31 @@ int hpet_timer_stop_set_go(unsigned long tick)
return 0;
}
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static cycle_t __vsyscall_fn vread_hpet(void)
+{
+ return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
+}
+
+struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = (cycle_t)HPET_MASK,
+ .mult = 0, /* set below */
+ .shift = HPET_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .vread = vread_hpet,
+};
+
int hpet_arch_init(void)
{
unsigned int id;
+ u64 tmp;
if (!hpet_address)
return -1;
@@ -132,6 +160,22 @@ int hpet_arch_init(void)
hpet_use_timer = (id & HPET_ID_LEGSUP);
+ /*
+ * hpet period is in femto seconds per cycle
+ * so we need to convert this to ns/cyc units
+ * aproximated by mult/2^shift
+ *
+ * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+ * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+ * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+ * (fsec/cyc << shift)/1000000 = mult
+ * (hpet_period << shift)/FSEC_PER_NSEC = mult
+ */
+ tmp = (u64)hpet_period << HPET_SHIFT;
+ do_div(tmp, FSEC_PER_NSEC);
+ clocksource_hpet.mult = (u32)tmp;
+ clocksource_register(&clocksource_hpet);
+
return hpet_timer_stop_set_go(hpet_tick);
}
@@ -444,68 +488,3 @@ static int __init nohpet_setup(char *s)
}
__setup("nohpet", nohpet_setup);
-
-#define HPET_MASK 0xFFFFFFFF
-#define HPET_SHIFT 22
-
-/* FSEC = 10^-15 NSEC = 10^-9 */
-#define FSEC_PER_NSEC 1000000
-
-static void *hpet_ptr;
-
-static cycle_t read_hpet(void)
-{
- return (cycle_t)readl(hpet_ptr);
-}
-
-static cycle_t __vsyscall_fn vread_hpet(void)
-{
- return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
-}
-
-struct clocksource clocksource_hpet = {
- .name = "hpet",
- .rating = 250,
- .read = read_hpet,
- .mask = (cycle_t)HPET_MASK,
- .mult = 0, /* set below */
- .shift = HPET_SHIFT,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .vread = vread_hpet,
-};
-
-static int __init init_hpet_clocksource(void)
-{
- unsigned long hpet_period;
- void __iomem *hpet_base;
- u64 tmp;
-
- if (!hpet_address)
- return -ENODEV;
-
- /* calculate the hpet address: */
- hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
- hpet_ptr = hpet_base + HPET_COUNTER;
-
- /* calculate the frequency: */
- hpet_period = readl(hpet_base + HPET_PERIOD);
-
- /*
- * hpet period is in femto seconds per cycle
- * so we need to convert this to ns/cyc units
- * aproximated by mult/2^shift
- *
- * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
- * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
- * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
- * (fsec/cyc << shift)/1000000 = mult
- * (hpet_period << shift)/FSEC_PER_NSEC = mult
- */
- tmp = (u64)hpet_period << HPET_SHIFT;
- do_div(tmp, FSEC_PER_NSEC);
- clocksource_hpet.mult = (u32)tmp;
-
- return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index c9addcfb96dc..75d73a9aa9ff 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -358,6 +358,8 @@ void __init time_init(void)
set_cyc2ns_scale(cpu_khz);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
+ init_tsc_clocksource();
+
setup_irq(0, &irq0);
}
diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c
index 895831865019..1a0edbbffaa0 100644
--- a/arch/x86_64/kernel/tsc.c
+++ b/arch/x86_64/kernel/tsc.c
@@ -210,7 +210,7 @@ void mark_tsc_unstable(void)
}
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-static int __init init_tsc_clocksource(void)
+void __init init_tsc_clocksource(void)
{
if (!notsc) {
clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
@@ -218,9 +218,6 @@ static int __init init_tsc_clocksource(void)
if (check_tsc_unstable())
clocksource_tsc.rating = 0;
- return clocksource_register(&clocksource_tsc);
+ clocksource_register(&clocksource_tsc);
}
- return 0;
}
-
-module_init(init_tsc_clocksource);