Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

2 files changed, 12 insertions, 16 deletions

diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c
index b25ff941e7c7..63b1b4a76671 100644
--- a/drivers/bus/bt1-apb.c
+++ b/drivers/bus/bt1-apb.c
@@ -175,10 +175,9 @@ static int bt1_apb_request_rst(struct bt1_apb *apb)
 	int ret;
 
 	apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst");
-	if (IS_ERR(apb->prst)) {
-		dev_warn(apb->dev, "Couldn't get reset control line\n");
-		return PTR_ERR(apb->prst);
-	}
+	if (IS_ERR(apb->prst))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->prst),
+				     "Couldn't get reset control line\n");
 
 	ret = reset_control_deassert(apb->prst);
 	if (ret)
@@ -199,10 +198,9 @@ static int bt1_apb_request_clk(struct bt1_apb *apb)
 	int ret;
 
 	apb->pclk = devm_clk_get(apb->dev, "pclk");
-	if (IS_ERR(apb->pclk)) {
-		dev_err(apb->dev, "Couldn't get APB clock descriptor\n");
-		return PTR_ERR(apb->pclk);
-	}
+	if (IS_ERR(apb->pclk))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->pclk),
+				     "Couldn't get APB clock descriptor\n");
 
 	ret = clk_prepare_enable(apb->pclk);
 	if (ret) {
diff --git a/drivers/bus/bt1-axi.c b/drivers/bus/bt1-axi.c
index e7a6744acc7b..70e49a6e5374 100644
--- a/drivers/bus/bt1-axi.c
+++ b/drivers/bus/bt1-axi.c
@@ -135,10 +135,9 @@ static int bt1_axi_request_rst(struct bt1_axi *axi)
 	int ret;
 
 	axi->arst = devm_reset_control_get_optional_exclusive(axi->dev, "arst");
-	if (IS_ERR(axi->arst)) {
-		dev_warn(axi->dev, "Couldn't get reset control line\n");
-		return PTR_ERR(axi->arst);
-	}
+	if (IS_ERR(axi->arst))
+		return dev_err_probe(axi->dev, PTR_ERR(axi->arst),
+				     "Couldn't get reset control line\n");
 
 	ret = reset_control_deassert(axi->arst);
 	if (ret)
@@ -159,10 +158,9 @@ static int bt1_axi_request_clk(struct bt1_axi *axi)
 	int ret;
 
 	axi->aclk = devm_clk_get(axi->dev, "aclk");
-	if (IS_ERR(axi->aclk)) {
-		dev_err(axi->dev, "Couldn't get AXI Interconnect clock\n");
-		return PTR_ERR(axi->aclk);
-	}
+	if (IS_ERR(axi->aclk))
+		return dev_err_probe(axi->dev, PTR_ERR(axi->aclk),
+				     "Couldn't get AXI Interconnect clock\n");
 
 	ret = clk_prepare_enable(axi->aclk);
 	if (ret) {