drm/exynos: add rotator ipp driver

This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
  . as limitaions, the pixel format to source buffer should be
    same as the one to destination buffer and no scaler.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

1 files changed, 73 insertions, 0 deletions

diff --git a/drivers/gpu/drm/exynos/regs-rotator.h b/drivers/gpu/drm/exynos/regs-rotator.h
new file mode 100644
index 000000000000..a09ac6e180da
--- /dev/null
+++ b/drivers/gpu/drm/exynos/regs-rotator.h
@@ -0,0 +1,73 @@
+/* drivers/gpu/drm/exynos/regs-rotator.h
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Register definition file for Samsung Rotator Interface (Rotator) driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef EXYNOS_REGS_ROTATOR_H
+#define EXYNOS_REGS_ROTATOR_H
+
+/* Configuration */
+#define ROT_CONFIG			0x00
+#define ROT_CONFIG_IRQ			(3 << 8)
+
+/* Image Control */
+#define ROT_CONTROL			0x10
+#define ROT_CONTROL_PATTERN_WRITE	(1 << 16)
+#define ROT_CONTROL_FMT_YCBCR420_2P	(1 << 8)
+#define ROT_CONTROL_FMT_RGB888		(6 << 8)
+#define ROT_CONTROL_FMT_MASK		(7 << 8)
+#define ROT_CONTROL_FLIP_VERTICAL	(2 << 6)
+#define ROT_CONTROL_FLIP_HORIZONTAL	(3 << 6)
+#define ROT_CONTROL_FLIP_MASK		(3 << 6)
+#define ROT_CONTROL_ROT_90		(1 << 4)
+#define ROT_CONTROL_ROT_180		(2 << 4)
+#define ROT_CONTROL_ROT_270		(3 << 4)
+#define ROT_CONTROL_ROT_MASK		(3 << 4)
+#define ROT_CONTROL_START		(1 << 0)
+
+/* Status */
+#define ROT_STATUS			0x20
+#define ROT_STATUS_IRQ_PENDING(x)	(1 << (x))
+#define ROT_STATUS_IRQ(x)		(((x) >> 8) & 0x3)
+#define ROT_STATUS_IRQ_VAL_COMPLETE	1
+#define ROT_STATUS_IRQ_VAL_ILLEGAL	2
+
+/* Buffer Address */
+#define ROT_SRC_BUF_ADDR(n)		(0x30 + ((n) << 2))
+#define ROT_DST_BUF_ADDR(n)		(0x50 + ((n) << 2))
+
+/* Buffer Size */
+#define ROT_SRC_BUF_SIZE		0x3c
+#define ROT_DST_BUF_SIZE		0x5c
+#define ROT_SET_BUF_SIZE_H(x)		((x) << 16)
+#define ROT_SET_BUF_SIZE_W(x)		((x) << 0)
+#define ROT_GET_BUF_SIZE_H(x)		((x) >> 16)
+#define ROT_GET_BUF_SIZE_W(x)		((x) & 0xffff)
+
+/* Crop Position */
+#define ROT_SRC_CROP_POS		0x40
+#define ROT_DST_CROP_POS		0x60
+#define ROT_CROP_POS_Y(x)		((x) << 16)
+#define ROT_CROP_POS_X(x)		((x) << 0)
+
+/* Source Crop Size */
+#define ROT_SRC_CROP_SIZE		0x44
+#define ROT_SRC_CROP_SIZE_H(x)		((x) << 16)
+#define ROT_SRC_CROP_SIZE_W(x)		((x) << 0)
+
+/* Round to nearest aligned value */
+#define ROT_ALIGN(x, align, mask)	(((x) + (1 << ((align) - 1))) & (mask))
+/* Minimum limit value */
+#define ROT_MIN(min, mask)		(((min) + ~(mask)) & (mask))
+/* Maximum limit value */
+#define ROT_MAX(max, mask)		((max) & (mask))
+
+#endif /* EXYNOS_REGS_ROTATOR_H */
+