treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

6 files changed, 9 insertions, 9 deletions

diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index 7af68604af77..254e31a90a66 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_IPOIB
 	tristate "IP-over-InfiniBand"
 	depends on NETDEVICES && INET && (IPV6 || IPV6=n)
-	---help---
+	help
 	  Support for the IP-over-InfiniBand protocol (IPoIB). This
 	  transports IP packets over InfiniBand so you can use your IB
 	  device as a fancy NIC.
@@ -13,7 +13,7 @@ config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
 	depends on INFINIBAND_IPOIB
 	default n
-	---help---
+	help
 	  This option enables support for IPoIB connected mode.  After
 	  enabling this option, you need to switch to connected mode
 	  through /sys/class/net/ibXXX/mode to actually create
@@ -28,7 +28,7 @@ config INFINIBAND_IPOIB_DEBUG
 	bool "IP-over-InfiniBand debugging" if EXPERT
 	depends on INFINIBAND_IPOIB
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  IPoIB driver.  The output can be turned on via the
 	  debug_level and mcast_debug_level module parameters (which
@@ -42,7 +42,7 @@ config INFINIBAND_IPOIB_DEBUG
 config INFINIBAND_IPOIB_DEBUG_DATA
 	bool "IP-over-InfiniBand data path debugging"
 	depends on INFINIBAND_IPOIB_DEBUG
-	---help---
+	help
 	  This option compiles debugging code into the data path
 	  of the IPoIB driver.  The output can be turned on via the
 	  data_debug_level module parameter; however, even with output
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index 1d29dffeaff9..3016a0c9a9f0 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
 	depends on SCSI && INET && INFINIBAND_ADDR_TRANS
 	select SCSI_ISCSI_ATTRS
-	---help---
+	help
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
 	  over InfiniBand. This allows you to access storage devices
 	  that speak iSCSI over iSER over InfiniBand.
diff --git a/drivers/infiniband/ulp/isert/Kconfig b/drivers/infiniband/ulp/isert/Kconfig
index 1a3f5ca8354c..798147adbef1 100644
--- a/drivers/infiniband/ulp/isert/Kconfig
+++ b/drivers/infiniband/ulp/isert/Kconfig
@@ -2,5 +2,5 @@
 config INFINIBAND_ISERT
 	tristate "iSCSI Extensions for RDMA (iSER) target support"
 	depends on INET && INFINIBAND_ADDR_TRANS && TARGET_CORE && ISCSI_TARGET
-	---help---
+	help
 	Support for iSCSI Extensions for RDMA (iSER) Target on Infiniband fabrics.
diff --git a/drivers/infiniband/ulp/opa_vnic/Kconfig b/drivers/infiniband/ulp/opa_vnic/Kconfig
index a1f266b9c0b2..e84248587187 100644
--- a/drivers/infiniband/ulp/opa_vnic/Kconfig
+++ b/drivers/infiniband/ulp/opa_vnic/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_OPA_VNIC
 	tristate "Intel OPA VNIC support"
 	depends on X86_64 && INFINIBAND
-	---help---
+	help
 	This is Omni-Path (OPA) Virtual Network Interface Controller (VNIC)
 	driver for Ethernet over Omni-Path feature. It implements the HW
 	independent VNIC functionality. It interfaces with Linux stack for
diff --git a/drivers/infiniband/ulp/srp/Kconfig b/drivers/infiniband/ulp/srp/Kconfig
index 6f5e7b3a3864..67cd63d1399c 100644
--- a/drivers/infiniband/ulp/srp/Kconfig
+++ b/drivers/infiniband/ulp/srp/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_SRP
 	tristate "InfiniBand SCSI RDMA Protocol"
 	depends on SCSI && INFINIBAND_ADDR_TRANS
 	select SCSI_SRP_ATTRS
-	---help---
+	help
 	  Support for the SCSI RDMA Protocol over InfiniBand.  This
 	  allows you to access storage devices that speak SRP over
 	  InfiniBand.
diff --git a/drivers/infiniband/ulp/srpt/Kconfig b/drivers/infiniband/ulp/srpt/Kconfig
index ce7567cea9f6..4b5d9b792cfa 100644
--- a/drivers/infiniband/ulp/srpt/Kconfig
+++ b/drivers/infiniband/ulp/srpt/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_SRPT
 	tristate "InfiniBand SCSI RDMA Protocol target support"
 	depends on INFINIBAND && INFINIBAND_ADDR_TRANS && TARGET_CORE
-	---help---
+	help
 
 	  Support for the SCSI RDMA Protocol (SRP) Target driver. The
 	  SRP protocol is a protocol that allows an initiator to access