Merge branch 'next' into for-linus

Prepare first round of input updates for 4.1 merge window.

43 files changed, 3579 insertions, 217 deletions

diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index cb150a1dbaff..b097af269e00 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -365,27 +365,35 @@ static void input_mt_set_slots(struct input_mt *mt,
 			       int *slots, int num_pos)
 {
 	struct input_mt_slot *s;
-	int *w = mt->red, *p;
+	int *w = mt->red, j;
 
-	for (p = slots; p != slots + num_pos; p++)
-		*p = -1;
+	for (j = 0; j != num_pos; j++)
+		slots[j] = -1;
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (!input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*w++ < 0)
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (w[j] < 0) {
+				slots[j] = s - mt->slots;
+				break;
+			}
+		}
+
+		w += num_pos;
 	}
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*p < 0) {
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (slots[j] < 0) {
+				slots[j] = s - mt->slots;
 				break;
 			}
+		}
 	}
 }
 
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a89ba7cb96f1..106fbac7f8c5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -588,6 +588,16 @@ config KEYBOARD_DAVINCI
 	  To compile this driver as a module, choose M here: the
 	  module will be called davinci_keyscan.
 
+config KEYBOARD_IPAQ_MICRO
+	tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y to enable support for the buttons attached to
+	  Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
@@ -686,4 +696,15 @@ config KEYBOARD_CAP11XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called cap11xx.
 
+config KEYBOARD_BCM
+	tristate "Broadcom keypad driver"
+	depends on OF && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	default ARCH_BCM_CYGNUS
+	help
+	  Say Y here if you want to use Broadcom keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm-keypad.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 470767884bd8..df28d5553c05 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index e27a25892db4..ec876b5b1382 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1399,8 +1399,8 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
 
 static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf)
 {
-	size_t len = bitmap_scnlistprintf(buf, PAGE_SIZE - 2,
-			atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
+	size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
+			       ATKBD_KEYMAP_SIZE, atkbd->force_release_mask);
 
 	buf[len++] = '\n';
 	buf[len] = '\0';
@@ -1653,6 +1653,12 @@ static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
 	return 1;
 }
 
+/*
+ * NOTE: do not add any more "force release" quirks to this table.  The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
 		.matches = {
diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c
new file mode 100644
index 000000000000..86a8b723ae15
--- /dev/null
+++ b/drivers/input/keyboard/bcm-keypad.c
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#define DEFAULT_CLK_HZ			31250
+#define MAX_ROWS			8
+#define MAX_COLS			8
+
+/* Register/field definitions */
+#define KPCR_OFFSET			0x00000080
+#define KPCR_MODE			0x00000002
+#define KPCR_MODE_SHIFT			1
+#define KPCR_MODE_MASK			1
+#define KPCR_ENABLE			0x00000001
+#define KPCR_STATUSFILTERENABLE		0x00008000
+#define KPCR_STATUSFILTERTYPE_SHIFT	12
+#define KPCR_COLFILTERENABLE		0x00000800
+#define KPCR_COLFILTERTYPE_SHIFT	8
+#define KPCR_ROWWIDTH_SHIFT		20
+#define KPCR_COLUMNWIDTH_SHIFT		16
+
+#define KPIOR_OFFSET			0x00000084
+#define KPIOR_ROWOCONTRL_SHIFT		24
+#define KPIOR_ROWOCONTRL_MASK		0xFF000000
+#define KPIOR_COLUMNOCONTRL_SHIFT	16
+#define KPIOR_COLUMNOCONTRL_MASK	0x00FF0000
+#define KPIOR_COLUMN_IO_DATA_SHIFT	0
+
+#define KPEMR0_OFFSET			0x00000090
+#define KPEMR1_OFFSET			0x00000094
+#define KPEMR2_OFFSET			0x00000098
+#define KPEMR3_OFFSET			0x0000009C
+#define KPEMR_EDGETYPE_BOTH		3
+
+#define KPSSR0_OFFSET			0x000000A0
+#define KPSSR1_OFFSET			0x000000A4
+#define KPSSRN_OFFSET(reg_n)		(KPSSR0_OFFSET + 4 * (reg_n))
+#define KPIMR0_OFFSET			0x000000B0
+#define KPIMR1_OFFSET			0x000000B4
+#define KPICR0_OFFSET			0x000000B8
+#define KPICR1_OFFSET			0x000000BC
+#define KPICRN_OFFSET(reg_n)		(KPICR0_OFFSET + 4 * (reg_n))
+#define KPISR0_OFFSET			0x000000C0
+#define KPISR1_OFFSET			0x000000C4
+
+#define KPCR_STATUSFILTERTYPE_MAX	7
+#define KPCR_COLFILTERTYPE_MAX		7
+
+/* Macros to determine the row/column from a bit that is set in SSR0/1. */
+#define BIT_TO_ROW_SSRN(bit_nr, reg_n)	(((bit_nr) >> 3) + 4 * (reg_n))
+#define BIT_TO_COL(bit_nr)		((bit_nr) % 8)
+
+/* Structure representing various run-time entities */
+struct bcm_kp {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct input_dev *input_dev;
+	unsigned long last_state[2];
+	unsigned int n_rows;
+	unsigned int n_cols;
+	u32 kpcr;
+	u32 kpior;
+	u32 kpemr;
+	u32 imr0_val;
+	u32 imr1_val;
+};
+
+/*
+ * Returns the keycode from the input device keymap given the row and
+ * column.
+ */
+static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col)
+{
+	unsigned int row_shift = get_count_order(kp->n_cols);
+	unsigned short *keymap = kp->input_dev->keycode;
+
+	return keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+}
+
+static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode)
+{
+	unsigned long state, change;
+	int bit_nr;
+	int key_press;
+	int row, col;
+	unsigned int keycode;
+
+	/* Clear interrupts */
+	writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num));
+
+	state = readl(kp->base + KPSSRN_OFFSET(reg_num));
+	change = kp->last_state[reg_num] ^ state;
+	kp->last_state[reg_num] = state;
+
+	for_each_set_bit(bit_nr, &change, BITS_PER_LONG) {
+		key_press = state & BIT(bit_nr);
+		/* The meaning of SSR register depends on pull mode. */
+		key_press = pull_mode ? !key_press : key_press;
+		row = BIT_TO_ROW_SSRN(bit_nr, reg_num);
+		col = BIT_TO_COL(bit_nr);
+		keycode = bcm_kp_get_keycode(kp, row, col);
+		input_report_key(kp->input_dev, keycode, key_press);
+	}
+}
+
+static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id)
+{
+	struct bcm_kp *kp = dev_id;
+	int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK;
+	int reg_num;
+
+	for (reg_num = 0; reg_num <= 1; reg_num++)
+		bcm_kp_report_keys(kp, reg_num, pull_mode);
+
+	input_sync(kp->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_kp_start(struct bcm_kp *kp)
+{
+	int error;
+
+	if (kp->clk) {
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	writel(kp->kpior, kp->base + KPIOR_OFFSET);
+
+	writel(kp->imr0_val, kp->base + KPIMR0_OFFSET);
+	writel(kp->imr1_val, kp->base + KPIMR1_OFFSET);
+
+	writel(kp->kpemr, kp->base + KPEMR0_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR1_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR2_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR3_OFFSET);
+
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET);
+	kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET);
+
+	writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET);
+
+	return 0;
+}
+
+static void bcm_kp_stop(const struct bcm_kp *kp)
+{
+	u32 val;
+
+	val = readl(kp->base + KPCR_OFFSET);
+	val &= ~KPCR_ENABLE;
+	writel(0, kp->base + KPCR_OFFSET);
+	writel(0, kp->base + KPIMR0_OFFSET);
+	writel(0, kp->base + KPIMR1_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	if (kp->clk)
+		clk_disable_unprepare(kp->clk);
+}
+
+static int bcm_kp_open(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	return bcm_kp_start(kp);
+}
+
+static void bcm_kp_close(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	bcm_kp_stop(kp);
+}
+
+static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp)
+{
+	struct device *dev = kp->input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	int error;
+	unsigned int dt_val;
+	unsigned int i;
+	unsigned int num_rows, col_mask, rows_set;
+
+	/* Initialize the KPCR Keypad Configuration Register */
+	kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE;
+
+	error = matrix_keypad_parse_of_params(dev, &kp->n_rows, &kp->n_cols);
+	if (error) {
+		dev_err(dev, "failed to parse kp params\n");
+		return error;
+	}
+
+	/* Set row width for the ASIC block. */
+	kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT;
+
+	/* Set column width for the ASIC block. */
+	kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT;
+
+	/* Configure the IMR registers */
+
+	/*
+	 * IMR registers contain interrupt enable bits for 8x8 matrix
+	 * IMR0 register format: <row3> <row2> <row1> <row0>
+	 * IMR1 register format: <row7> <row6> <row5> <row4>
+	 */
+	col_mask = (1 << (kp->n_cols)) - 1;
+	num_rows = kp->n_rows;
+
+	/* Set column bits in rows 0 to 3 in IMR0 */
+	kp->imr0_val = col_mask;
+
+	rows_set = 1;
+	while (--num_rows && rows_set++ < 4)
+		kp->imr0_val |= kp->imr0_val << MAX_COLS;
+
+	/* Set column bits in rows 4 to 7 in IMR1 */
+	kp->imr1_val = 0;
+	if (num_rows) {
+		kp->imr1_val = col_mask;
+		while (--num_rows)
+			kp->imr1_val |= kp->imr1_val << MAX_COLS;
+	}
+
+	/* Initialize the KPEMR Keypress Edge Mode Registers */
+	/* Trigger on both edges */
+	kp->kpemr = 0;
+	for (i = 0; i <= 30; i += 2)
+		kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i);
+
+	/*
+	 * Obtain the Status filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "status-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_STATUSFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Status filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT;
+
+	/*
+	 * Obtain the Column filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "col-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_COLFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Column filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT;
+
+	/*
+	 * Determine between the row and column,
+	 * which should be configured as output.
+	 */
+	if (of_property_read_bool(np, "row-output-enabled")) {
+		/*
+		* Set RowOContrl or ColumnOContrl in KPIOR
+		* to the number of pins to drive as outputs
+		*/
+		kp->kpior = ((1 << kp->n_rows) - 1) <<
+				KPIOR_ROWOCONTRL_SHIFT;
+	} else {
+		kp->kpior = ((1 << kp->n_cols) - 1) <<
+				KPIOR_COLUMNOCONTRL_SHIFT;
+	}
+
+	/*
+	 * Determine if the scan pull up needs to be enabled
+	 */
+	if (of_property_read_bool(np, "pull-up-enabled"))
+		kp->kpcr |= KPCR_MODE;
+
+	dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n",
+		kp->n_rows, kp->n_cols,
+		kp->kpcr, kp->kpior, kp->kpemr);
+
+	return 0;
+}
+
+
+static int bcm_kp_probe(struct platform_device *pdev)
+{
+	struct bcm_kp *kp;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int error;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (of_property_read_bool(pdev->dev.of_node, "autorepeat"))
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_dev->name = pdev->name;
+	input_dev->phys = "keypad/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = bcm_kp_open;
+	input_dev->close = bcm_kp_close;
+
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+
+	input_set_drvdata(input_dev, kp);
+
+	kp->input_dev = input_dev;
+
+	platform_set_drvdata(pdev, kp);
+
+	error = bcm_kp_matrix_key_parse_dt(kp);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kp->n_rows, kp->n_cols,
+					   NULL, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	/* Get the KEYPAD base address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing keypad base address resource\n");
+		return -ENODEV;
+	}
+
+	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	/* Enable clock */
+	kp->clk = devm_clk_get(&pdev->dev, "peri_clk");
+	if (IS_ERR(kp->clk)) {
+		error = PTR_ERR(kp->clk);
+		if (error != -ENOENT) {
+			if (error != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "Failed to get clock\n");
+			return error;
+		}
+		dev_dbg(&pdev->dev,
+			"No clock specified. Assuming it's enabled\n");
+		kp->clk = NULL;
+	} else {
+		unsigned int desired_rate;
+		long actual_rate;
+
+		error = of_property_read_u32(pdev->dev.of_node,
+					     "clock-frequency", &desired_rate);
+		if (error < 0)
+			desired_rate = DEFAULT_CLK_HZ;
+
+		actual_rate = clk_round_rate(kp->clk, desired_rate);
+		if (actual_rate <= 0)
+			return -EINVAL;
+
+		error = clk_set_rate(kp->clk, actual_rate);
+		if (error)
+			return error;
+
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	/* Put the kp into a known sane state */
+	bcm_kp_stop(kp);
+
+	kp->irq = platform_get_irq(pdev, 0);
+	if (kp->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, kp->irq,
+					  NULL, bcm_kp_isr_thread,
+					  IRQF_ONESHOT, pdev->name, kp);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kp_of_match[] = {
+	{ .compatible = "brcm,bcm-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kp_of_match);
+
+static struct platform_driver bcm_kp_device_driver = {
+	.probe		= bcm_kp_probe,
+	.driver		= {
+		.name	= "bcm-keypad",
+		.of_match_table = of_match_ptr(bcm_kp_of_match),
+	}
+};
+
+module_platform_driver(bcm_kp_device_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("BCM Keypad Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index ffa989f2c785..64b9b59ad4cb 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -338,7 +338,7 @@ static int cros_ec_keyb_resume(struct device *dev)
 	 * wake source (e.g. the lid is open and the user might press a key to
 	 * wake) then the key scan buffer should be preserved.
 	 */
-	if (ckdev->ec->was_wake_device)
+	if (!ckdev->ec->was_wake_device)
 		cros_ec_keyb_clear_keyboard(ckdev);
 
 	return 0;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 883d6aed5b9a..ddf4045de084 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -190,7 +190,7 @@ static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
 		__set_bit(bdata->button->code, bits);
 	}
 
-	ret = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, bits, n_events);
+	ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits);
 	buf[ret++] = '\n';
 	buf[ret] = '\0';
 
diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c
new file mode 100644
index 000000000000..602900d1f937
--- /dev/null
+++ b/drivers/input/keyboard/ipaq-micro-keys.c
@@ -0,0 +1,168 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+	struct ipaq_micro *micro;
+	struct input_dev *input;
+	u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+	KEY_RECORD,		/* 1:  Record button			*/
+	KEY_CALENDAR,		/* 2:  Calendar				*/
+	KEY_ADDRESSBOOK,	/* 3:  Contacts (looks like Outlook)	*/
+	KEY_MAIL,		/* 4:  Envelope (Q on older iPAQs)	*/
+	KEY_HOMEPAGE,		/* 5:  Start (looks like swoopy arrow)	*/
+	KEY_UP,			/* 6:  Up				*/
+	KEY_RIGHT,		/* 7:  Right				*/
+	KEY_LEFT,		/* 8:  Left				*/
+	KEY_DOWN,		/* 9:  Down				*/
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+	struct ipaq_micro_keys *keys = data;
+	int key, down;
+
+	down = 0x80 & msg[0];
+	key  = 0x7f & msg[0];
+
+	if (key < ARRAY_SIZE(micro_keycodes)) {
+		input_report_key(keys->input, keys->codes[key], down);
+		input_sync(keys->input);
+	}
+}
+
+static void micro_key_start(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = micro_key_receive;
+	keys->micro->key_data = keys;
+	spin_unlock(&keys->micro->lock);
+}
+
+static void micro_key_stop(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = NULL;
+	keys->micro->key_data = NULL;
+	spin_unlock(&keys->micro->lock);
+}
+
+static int micro_key_open(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_start(keys);
+
+	return 0;
+}
+
+static void micro_key_close(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_stop(keys);
+}
+
+static int micro_key_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro_keys *keys;
+	int error;
+	int i;
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->micro = dev_get_drvdata(pdev->dev.parent);
+
+	keys->input = devm_input_allocate_device(&pdev->dev);
+	if (!keys->input)
+		return -ENOMEM;
+
+	keys->input->keycodesize = sizeof(micro_keycodes[0]);
+	keys->input->keycodemax = ARRAY_SIZE(micro_keycodes);
+	keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
+			   keys->input->keycodesize * keys->input->keycodemax,
+			   GFP_KERNEL);
+	keys->input->keycode = keys->codes;
+
+	__set_bit(EV_KEY, keys->input->evbit);
+	for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++)
+		__set_bit(micro_keycodes[i], keys->input->keybit);
+
+	keys->input->name = "h3600 micro keys";
+	keys->input->open = micro_key_open;
+	keys->input->close = micro_key_close;
+	input_set_drvdata(keys->input, keys);
+
+	error = input_register_device(keys->input);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, keys);
+	return 0;
+}
+
+static int __maybe_unused micro_key_suspend(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+	micro_key_stop(keys);
+
+	return 0;
+}
+
+static int __maybe_unused micro_key_resume(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+	struct input_dev *input = keys->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users)
+		micro_key_start(keys);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops,
+			 micro_key_suspend, micro_key_resume);
+
+static struct platform_driver micro_key_device_driver = {
+	.driver = {
+		.name    = "ipaq-micro-keys",
+		.pm	= &micro_key_dev_pm_ops,
+	},
+	.probe   = micro_key_probe,
+};
+module_platform_driver(micro_key_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
+MODULE_ALIAS("platform:ipaq-micro-keys");
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 563932500ff1..31c606a4dd31 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -70,6 +70,28 @@
 #define TC3589x_KBD_INT_CLR	0x1
 
 /**
+ * struct tc35893_keypad_platform_data - platform specific keypad data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
+/**
  * struct tc_keypad - data structure used by keypad driver
  * @tc3589x:    pointer to tc35893
  * @input:      pointer to input device object
@@ -296,7 +318,6 @@ static void tc3589x_keypad_close(struct input_dev *input)
 	tc3589x_keypad_disable(keypad);
 }
 
-#ifdef CONFIG_OF
 static const struct tc3589x_keypad_platform_data *
 tc3589x_keypad_of_probe(struct device *dev)
 {
@@ -346,14 +367,6 @@ tc3589x_keypad_of_probe(struct device *dev)
 
 	return plat;
 }
-#else
-static inline const struct tc3589x_keypad_platform_data *
-tc3589x_keypad_of_probe(struct device *dev)
-{
-	return ERR_PTR(-ENODEV);
-}
-#endif
-
 
 static int tc3589x_keypad_probe(struct platform_device *pdev)
 {
@@ -363,13 +376,10 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
 	const struct tc3589x_keypad_platform_data *plat;
 	int error, irq;
 
-	plat = tc3589x->pdata->keypad;
-	if (!plat) {
-		plat = tc3589x_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat)) {
-			dev_err(&pdev->dev, "invalid keypad platform data\n");
-			return PTR_ERR(plat);
-		}
+	plat = tc3589x_keypad_of_probe(&pdev->dev);
+	if (IS_ERR(plat)) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return PTR_ERR(plat);
 	}
 
 	irq = platform_get_irq(pdev, 0);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6deb8dae3205..4436ab1b9735 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -115,6 +115,18 @@ config INPUT_PCSPKR
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcspkr.
 
+config INPUT_PM8941_PWRKEY
+	tristate "Qualcomm PM8941 power key support"
+	depends on MFD_SPMI_PMIC
+	help
+	  Say Y here if you want support for the power key usually found
+	  on boards using a Qualcomm PM8941 compatible PMIC.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pm8941-pwrkey.
+
 config INPUT_PM8XXX_VIBRATOR
 	tristate "Qualcomm PM8XXX vibrator support"
 	depends on MFD_PM8XXX
@@ -165,6 +177,18 @@ config INPUT_MAX77693_HAPTIC
 	  To compile this driver as module, choose M here: the
 	  module will be called max77693-haptic.
 
+config INPUT_MAX77843_HAPTIC
+    tristate "MAXIM MAX77843 haptic controller support"
+    depends on MFD_MAX77843 && REGULATOR
+    select INPUT_FF_MEMLESS
+    help
+      This option enables support for the haptic controller on
+      MAXIM MAX77843 chip. The driver supports ff-memless interface
+      from input framework.
+
+      To compile this driver as module, choose M here: the
+      module will be called max77843-haptic.
+
 config INPUT_MAX8925_ONKEY
 	tristate "MAX8925 ONKEY support"
 	depends on MFD_MAX8925
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 403a1a54a76c..78ba4c1b8532 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
+obj-$(CONFIG_INPUT_MAX77843_HAPTIC)	+= max77843-haptic.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
@@ -49,6 +50,7 @@ obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
+obj-$(CONFIG_INPUT_PM8941_PWRKEY)	+= pm8941-pwrkey.o
 obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR)	+= pm8xxx-vibrator.o
 obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c
new file mode 100644
index 000000000000..dccbb465a055
--- /dev/null
+++ b/drivers/input/misc/max77843-haptic.c
@@ -0,0 +1,358 @@
+/*
+ * MAXIM MAX77693 Haptic device driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define MAX_MAGNITUDE_SHIFT        16
+
+enum max77843_haptic_motor_type {
+	MAX77843_HAPTIC_ERM = 0,
+	MAX77843_HAPTIC_LRA,
+};
+
+enum max77843_haptic_pwm_divisor {
+	MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
+	MAX77843_HAPTIC_PWM_DIVISOR_64,
+	MAX77843_HAPTIC_PWM_DIVISOR_128,
+	MAX77843_HAPTIC_PWM_DIVISOR_256,
+};
+
+struct max77843_haptic {
+	struct regmap *regmap_haptic;
+	struct device *dev;
+	struct input_dev *input_dev;
+	struct pwm_device *pwm_dev;
+	struct regulator *motor_reg;
+	struct work_struct work;
+	struct mutex mutex;
+
+	unsigned int magnitude;
+	unsigned int pwm_duty;
+
+	bool active;
+	bool suspended;
+
+	enum max77843_haptic_motor_type type;
+	enum max77843_haptic_pwm_divisor pwm_divisor;
+};
+
+static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
+{
+	int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
+	int error;
+
+	error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
+	if (error) {
+		dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
+{
+	int error;
+
+	error = regmap_update_bits(haptic->regmap_haptic,
+				   MAX77843_SYS_REG_MAINCTRL1,
+				   MAX77843_MAINCTRL1_BIASEN_MASK,
+				   on << MAINCTRL1_BIASEN_SHIFT);
+	if (error) {
+		dev_err(haptic->dev, "failed to %s bias: %d\n",
+			on ? "enable" : "disable", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
+{
+	unsigned int value;
+	int error;
+
+	value = (haptic->type << MCONFIG_MODE_SHIFT) |
+		(enable << MCONFIG_MEN_SHIFT) |
+		(haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
+
+	error = regmap_write(haptic->regmap_haptic,
+			     MAX77843_HAP_REG_MCONFIG, value);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to update haptic config: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_enable(struct max77843_haptic *haptic)
+{
+	int error;
+
+	if (haptic->active)
+		return 0;
+
+	error = pwm_enable(haptic->pwm_dev);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to enable pwm device: %d\n", error);
+		return error;
+	}
+
+	error = max77843_haptic_config(haptic, true);
+	if (error)
+		goto err_config;
+
+	haptic->active = true;
+
+	return 0;
+
+err_config:
+	pwm_disable(haptic->pwm_dev);
+
+	return error;
+}
+
+static int max77843_haptic_disable(struct max77843_haptic *haptic)
+{
+	int error;
+
+	if (!haptic->active)
+		return 0;
+
+	error = max77843_haptic_config(haptic, false);
+	if (error)
+		return error;
+
+	pwm_disable(haptic->pwm_dev);
+
+	haptic->active = false;
+
+	return 0;
+}
+
+static void max77843_haptic_play_work(struct work_struct *work)
+{
+	struct max77843_haptic *haptic =
+			container_of(work, struct max77843_haptic, work);
+	int error;
+
+	mutex_lock(&haptic->mutex);
+
+	if (haptic->suspended)
+		goto out_unlock;
+
+	if (haptic->magnitude) {
+		error = max77843_haptic_set_duty_cycle(haptic);
+		if (error) {
+			dev_err(haptic->dev,
+				"failed to set duty cycle: %d\n", error);
+			goto out_unlock;
+		}
+
+		error = max77843_haptic_enable(haptic);
+		if (error)
+			dev_err(haptic->dev,
+				"cannot enable haptic: %d\n", error);
+	} else {
+		error = max77843_haptic_disable(haptic);
+		if (error)
+			dev_err(haptic->dev,
+				"cannot disable haptic: %d\n", error);
+	}
+
+out_unlock:
+	mutex_unlock(&haptic->mutex);
+}
+
+static int max77843_haptic_play_effect(struct input_dev *dev, void *data,
+		struct ff_effect *effect)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	u64 period_mag_multi;
+
+	haptic->magnitude = effect->u.rumble.strong_magnitude;
+	if (!haptic->magnitude)
+		haptic->magnitude = effect->u.rumble.weak_magnitude;
+
+	period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
+	haptic->pwm_duty = (unsigned int)(period_mag_multi >>
+						MAX_MAGNITUDE_SHIFT);
+
+	schedule_work(&haptic->work);
+
+	return 0;
+}
+
+static int max77843_haptic_open(struct input_dev *dev)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	int error;
+
+	error = max77843_haptic_bias(haptic, true);
+	if (error)
+		return error;
+
+	error = regulator_enable(haptic->motor_reg);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to enable regulator: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void max77843_haptic_close(struct input_dev *dev)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	int error;
+
+	cancel_work_sync(&haptic->work);
+	max77843_haptic_disable(haptic);
+
+	error = regulator_disable(haptic->motor_reg);
+	if (error)
+		dev_err(haptic->dev,
+			"failed to disable regulator: %d\n", error);
+
+	max77843_haptic_bias(haptic, false);
+}
+
+static int max77843_haptic_probe(struct platform_device *pdev)
+{
+	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77843_haptic *haptic;
+	int error;
+
+	haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+	if (!haptic)
+		return -ENOMEM;
+
+	haptic->regmap_haptic = max77843->regmap;
+	haptic->dev = &pdev->dev;
+	haptic->type = MAX77843_HAPTIC_LRA;
+	haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128;
+
+	INIT_WORK(&haptic->work, max77843_haptic_play_work);
+	mutex_init(&haptic->mutex);
+
+	haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
+	if (IS_ERR(haptic->pwm_dev)) {
+		dev_err(&pdev->dev, "failed to get pwm device\n");
+		return PTR_ERR(haptic->pwm_dev);
+	}
+
+	haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic");
+	if (IS_ERR(haptic->motor_reg)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(haptic->motor_reg);
+	}
+
+	haptic->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!haptic->input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	haptic->input_dev->name = "max77843-haptic";
+	haptic->input_dev->id.version = 1;
+	haptic->input_dev->dev.parent = &pdev->dev;
+	haptic->input_dev->open = max77843_haptic_open;
+	haptic->input_dev->close = max77843_haptic_close;
+	input_set_drvdata(haptic->input_dev, haptic);
+	input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(haptic->input_dev, NULL,
+			max77843_haptic_play_effect);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create force-feedback\n");
+		return error;
+	}
+
+	error = input_register_device(haptic->input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, haptic);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_haptic_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+	int error;
+
+	error = mutex_lock_interruptible(&haptic->mutex);
+	if (error)
+		return error;
+
+	max77843_haptic_disable(haptic);
+
+	haptic->suspended = true;
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_haptic_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+	unsigned int magnitude;
+
+	mutex_lock(&haptic->mutex);
+
+	haptic->suspended = false;
+
+	magnitude = ACCESS_ONCE(haptic->magnitude);
+	if (magnitude)
+		max77843_haptic_enable(haptic);
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops,
+		max77843_haptic_suspend, max77843_haptic_resume);
+
+static struct platform_driver max77843_haptic_driver = {
+	.driver		= {
+		.name	= "max77843-haptic",
+		.pm	= &max77843_haptic_pm_ops,
+	},
+	.probe		= max77843_haptic_probe,
+};
+module_platform_driver(max77843_haptic_driver);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c
index 98228773a111..19c73574458e 100644
--- a/drivers/input/misc/mma8450.c
+++ b/drivers/input/misc/mma8450.c
@@ -174,12 +174,13 @@ static int mma8450_probe(struct i2c_client *c,
 	struct mma8450 *m;
 	int err;
 
-	m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
-	idev = input_allocate_polled_device();
-	if (!m || !idev) {
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
+	m = devm_kzalloc(&c->dev, sizeof(*m), GFP_KERNEL);
+	if (!m)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_polled_device(&c->dev);
+	if (!idev)
+		return -ENOMEM;
 
 	m->client = c;
 	m->idev = idev;
@@ -187,7 +188,6 @@ static int mma8450_probe(struct i2c_client *c,
 	idev->private		= m;
 	idev->input->name	= MMA8450_DRV_NAME;
 	idev->input->id.bustype	= BUS_I2C;
-	idev->input->dev.parent = &c->dev;
 	idev->poll		= mma8450_poll;
 	idev->poll_interval	= POLL_INTERVAL;
 	idev->poll_interval_max	= POLL_INTERVAL_MAX;
@@ -202,29 +202,12 @@ static int mma8450_probe(struct i2c_client *c,
 	err = input_register_polled_device(idev);
 	if (err) {
 		dev_err(&c->dev, "failed to register polled input device\n");
-		goto err_free_mem;
+		return err;
 	}
 
 	i2c_set_clientdata(c, m);
 
 	return 0;
-
-err_free_mem:
-	input_free_polled_device(idev);
-	kfree(m);
-	return err;
-}
-
-static int mma8450_remove(struct i2c_client *c)
-{
-	struct mma8450 *m = i2c_get_clientdata(c);
-	struct input_polled_dev *idev = m->idev;
-
-	input_unregister_polled_device(idev);
-	input_free_polled_device(idev);
-	kfree(m);
-
-	return 0;
 }
 
 static const struct i2c_device_id mma8450_id[] = {
@@ -242,11 +225,9 @@ MODULE_DEVICE_TABLE(of, mma8450_dt_ids);
 static struct i2c_driver mma8450_driver = {
 	.driver = {
 		.name	= MMA8450_DRV_NAME,
-		.owner	= THIS_MODULE,
 		.of_match_table = mma8450_dt_ids,
 	},
 	.probe		= mma8450_probe,
-	.remove		= mma8450_remove,
 	.id_table	= mma8450_id,
 };
 
diff --git a/drivers/input/misc/palmas-pwrbutton.c b/drivers/input/misc/palmas-pwrbutton.c
index 1f9b5ee92746..1e1baed63929 100644
--- a/drivers/input/misc/palmas-pwrbutton.c
+++ b/drivers/input/misc/palmas-pwrbutton.c
@@ -304,7 +304,7 @@ static SIMPLE_DEV_PM_OPS(palmas_pwron_pm,
 			 palmas_pwron_suspend, palmas_pwron_resume);
 
 #ifdef CONFIG_OF
-static struct of_device_id of_palmas_pwr_match[] = {
+static const struct of_device_id of_palmas_pwr_match[] = {
 	{ .compatible = "ti,palmas-pwrbutton" },
 	{ },
 };
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
new file mode 100644
index 000000000000..867db8a91372
--- /dev/null
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define PON_REV2			0x01
+
+#define PON_RT_STS			0x10
+#define  PON_KPDPWR_N_SET		BIT(0)
+
+#define PON_PS_HOLD_RST_CTL		0x5a
+#define PON_PS_HOLD_RST_CTL2		0x5b
+#define  PON_PS_HOLD_ENABLE		BIT(7)
+#define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_SHUTDOWN	4
+#define  PON_PS_HOLD_TYPE_HARD_RESET	7
+
+#define PON_PULL_CTL			0x70
+#define  PON_KPDPWR_PULL_UP		BIT(1)
+
+#define PON_DBC_CTL			0x71
+#define  PON_DBC_DELAY_MASK		0x7
+
+
+struct pm8941_pwrkey {
+	struct device *dev;
+	int irq;
+	u32 baseaddr;
+	struct regmap *regmap;
+	struct input_dev *input;
+
+	unsigned int revision;
+	struct notifier_block reboot_notifier;
+};
+
+static int pm8941_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
+						    reboot_notifier);
+	unsigned int enable_reg;
+	unsigned int reset_type;
+	int error;
+
+	/* PMICs with revision 0 have the enable bit in same register as ctrl */
+	if (pwrkey->revision == 0)
+		enable_reg = PON_PS_HOLD_RST_CTL;
+	else
+		enable_reg = PON_PS_HOLD_RST_CTL2;
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   0);
+	if (error)
+		dev_err(pwrkey->dev,
+			"unable to clear ps hold reset enable: %d\n",
+			error);
+
+	/*
+	 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
+	 * writes.
+	 */
+	usleep_range(100, 1000);
+
+	switch (code) {
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
+		break;
+	case SYS_RESTART:
+	default:
+		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+		break;
+	};
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
+				   PON_PS_HOLD_TYPE_MASK,
+				   reset_type);
+	if (error)
+		dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
+			error);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   PON_PS_HOLD_ENABLE);
+	if (error)
+		dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
+
+	return NOTIFY_DONE;
+}
+
+static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
+{
+	struct pm8941_pwrkey *pwrkey = _data;
+	unsigned int sts;
+	int error;
+
+	error = regmap_read(pwrkey->regmap,
+			    pwrkey->baseaddr + PON_RT_STS, &sts);
+	if (error)
+		return IRQ_HANDLED;
+
+	input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
+	input_sync(pwrkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
+			 pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+
+static int pm8941_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey;
+	bool pull_up;
+	u32 req_delay;
+	int error;
+
+	if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
+		req_delay = 15625;
+
+	if (req_delay > 2000000 || req_delay == 0) {
+		dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
+		return -EINVAL;
+	}
+
+	pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
+
+	pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
+	if (!pwrkey)
+		return -ENOMEM;
+
+	pwrkey->dev = &pdev->dev;
+
+	pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pwrkey->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	pwrkey->irq = platform_get_irq(pdev, 0);
+	if (pwrkey->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return pwrkey->irq;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "reg",
+				     &pwrkey->baseaddr);
+	if (error)
+		return error;
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
+			    &pwrkey->revision);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+		return error;
+	}
+
+	pwrkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrkey->input) {
+		dev_dbg(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_capability(pwrkey->input, EV_KEY, KEY_POWER);
+
+	pwrkey->input->name = "pm8941_pwrkey";
+	pwrkey->input->phys = "pm8941_pwrkey/input0";
+
+	req_delay = (req_delay << 6) / USEC_PER_SEC;
+	req_delay = ilog2(req_delay);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_DBC_CTL,
+				   PON_DBC_DELAY_MASK,
+				   req_delay);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+		return error;
+	}
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PULL_CTL,
+				   PON_KPDPWR_PULL_UP,
+				   pull_up ? PON_KPDPWR_PULL_UP : 0);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
+					  NULL, pm8941_pwrkey_irq,
+					  IRQF_ONESHOT,
+					  "pm8941_pwrkey", pwrkey);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(pwrkey->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			error);
+		return error;
+	}
+
+	pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
+	error = register_reboot_notifier(&pwrkey->reboot_notifier);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+			error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pwrkey);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_remove(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	unregister_reboot_notifier(&pwrkey->reboot_notifier);
+
+	return 0;
+}
+
+static const struct of_device_id pm8941_pwr_key_id_table[] = {
+	{ .compatible = "qcom,pm8941-pwrkey" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
+
+static struct platform_driver pm8941_pwrkey_driver = {
+	.probe = pm8941_pwrkey_probe,
+	.remove = pm8941_pwrkey_remove,
+	.driver = {
+		.name = "pm8941-pwrkey",
+		.pm = &pm8941_pwr_key_pm_ops,
+		.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
+	},
+};
+module_platform_driver(pm8941_pwrkey_driver);
+
+MODULE_DESCRIPTION("PM8941 Power Key driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index a28ee70ff158..e82edf810d1f 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -50,7 +50,6 @@ static int pwm_beeper_event(struct input_dev *input,
 	}
 
 	if (value == 0) {
-		pwm_config(beeper->pwm, 0, 0);
 		pwm_disable(beeper->pwm);
 	} else {
 		period = HZ_TO_NANOSECONDS(value);
@@ -169,12 +168,6 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
 			 pwm_beeper_suspend, pwm_beeper_resume);
 
-#ifdef CONFIG_PM_SLEEP
-#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
-#else
-#define PWM_BEEPER_PM_OPS NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id pwm_beeper_match[] = {
 	{ .compatible = "pwm-beeper", },
@@ -187,7 +180,7 @@ static struct platform_driver pwm_beeper_driver = {
 	.remove = pwm_beeper_remove,
 	.driver = {
 		.name	= "pwm-beeper",
-		.pm	= PWM_BEEPER_PM_OPS,
+		.pm	= &pwm_beeper_pm_ops,
 		.of_match_table = of_match_ptr(pwm_beeper_match),
 	},
 };
diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c
index 132eb914ea3e..6bf3f1082f71 100644
--- a/drivers/input/misc/regulator-haptic.c
+++ b/drivers/input/misc/regulator-haptic.c
@@ -245,7 +245,7 @@ static int __maybe_unused regulator_haptic_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops,
 		regulator_haptic_suspend, regulator_haptic_resume);
 
-static struct of_device_id regulator_haptic_dt_match[] = {
+static const struct of_device_id regulator_haptic_dt_match[] = {
 	{ .compatible = "regulator-haptic" },
 	{ /* sentinel */ },
 };
diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c
index 54508dec4eb3..a39b62651a4b 100644
--- a/drivers/input/misc/tps65218-pwrbutton.c
+++ b/drivers/input/misc/tps65218-pwrbutton.c
@@ -106,7 +106,7 @@ static int tps65218_pwron_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id of_tps65218_pwr_match[] = {
+static const struct of_device_id of_tps65218_pwr_match[] = {
 	{ .compatible = "ti,tps65218-pwrbutton" },
 	{ },
 };
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index da3af8db697c..e6708f6efb4d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -153,10 +153,18 @@ static const struct alps_protocol_info alps_v7_protocol_data = {
 	ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT
 };
 
+static const struct alps_protocol_info alps_v8_protocol_data = {
+	ALPS_PROTO_V8, 0x18, 0x18, 0
+};
+
 static void alps_set_abs_params_st(struct alps_data *priv,
 				   struct input_dev *dev1);
 static void alps_set_abs_params_mt(struct alps_data *priv,
 				   struct input_dev *dev1);
+static void alps_set_abs_params_v7(struct alps_data *priv,
+				   struct input_dev *dev1);
+static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
+				       struct input_dev *dev1);
 
 /* Packet formats are described in Documentation/input/alps.txt */
 
@@ -1093,6 +1101,176 @@ static void alps_process_packet_v7(struct psmouse *psmouse)
 		alps_process_touchpad_packet_v7(psmouse);
 }
 
+static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
+{
+	unsigned char pkt_id = SS4_PACKET_ID_IDLE;
+
+	if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
+	    (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
+		pkt_id = SS4_PACKET_ID_IDLE;
+	} else if (!(byte[3] & 0x10)) {
+		pkt_id = SS4_PACKET_ID_ONE;
+	} else if (!(byte[3] & 0x20)) {
+		pkt_id = SS4_PACKET_ID_TWO;
+	} else {
+		pkt_id = SS4_PACKET_ID_MULTI;
+	}
+
+	return pkt_id;
+}
+
+static int alps_decode_ss4_v2(struct alps_fields *f,
+			      unsigned char *p, struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	unsigned char pkt_id;
+	unsigned int no_data_x, no_data_y;
+
+	pkt_id = alps_get_pkt_id_ss4_v2(p);
+
+	/* Current packet is 1Finger coordinate packet */
+	switch (pkt_id) {
+	case SS4_PACKET_ID_ONE:
+		f->mt[0].x = SS4_1F_X_V2(p);
+		f->mt[0].y = SS4_1F_Y_V2(p);
+		f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
+		f->fingers = 1;
+		f->first_mp = 0;
+		f->is_mp = 0;
+		break;
+
+	case SS4_PACKET_ID_TWO:
+		if (priv->flags & ALPS_BUTTONPAD) {
+			f->mt[0].x = SS4_BTL_MF_X_V2(p, 0);
+			f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0);
+			f->mt[1].x = SS4_BTL_MF_X_V2(p, 1);
+			f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1);
+		} else {
+			f->mt[0].x = SS4_STD_MF_X_V2(p, 0);
+			f->mt[0].y = SS4_STD_MF_Y_V2(p, 0);
+			f->mt[1].x = SS4_STD_MF_X_V2(p, 1);
+			f->mt[1].y = SS4_STD_MF_Y_V2(p, 1);
+		}
+		f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0;
+
+		if (SS4_IS_MF_CONTINUE(p)) {
+			f->first_mp = 1;
+		} else {
+			f->fingers = 2;
+			f->first_mp = 0;
+		}
+		f->is_mp = 0;
+
+		break;
+
+	case SS4_PACKET_ID_MULTI:
+		if (priv->flags & ALPS_BUTTONPAD) {
+			f->mt[2].x = SS4_BTL_MF_X_V2(p, 0);
+			f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0);
+			f->mt[3].x = SS4_BTL_MF_X_V2(p, 1);
+			f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1);
+			no_data_x = SS4_MFPACKET_NO_AX_BL;
+			no_data_y = SS4_MFPACKET_NO_AY_BL;
+		} else {
+			f->mt[2].x = SS4_STD_MF_X_V2(p, 0);
+			f->mt[2].y = SS4_STD_MF_Y_V2(p, 0);
+			f->mt[3].x = SS4_STD_MF_X_V2(p, 1);
+			f->mt[3].y = SS4_STD_MF_Y_V2(p, 1);
+			no_data_x = SS4_MFPACKET_NO_AX;
+			no_data_y = SS4_MFPACKET_NO_AY;
+		}
+
+		f->first_mp = 0;
+		f->is_mp = 1;
+
+		if (SS4_IS_5F_DETECTED(p)) {
+			f->fingers = 5;
+		} else if (f->mt[3].x == no_data_x &&
+			     f->mt[3].y == no_data_y) {
+			f->mt[3].x = 0;
+			f->mt[3].y = 0;
+			f->fingers = 3;
+		} else {
+			f->fingers = 4;
+		}
+		break;
+
+	case SS4_PACKET_ID_IDLE:
+	default:
+		memset(f, 0, sizeof(struct alps_fields));
+		break;
+	}
+
+	f->left = !!(SS4_BTN_V2(p) & 0x01);
+	if (!(priv->flags & ALPS_BUTTONPAD)) {
+		f->right = !!(SS4_BTN_V2(p) & 0x02);
+		f->middle = !!(SS4_BTN_V2(p) & 0x04);
+	}
+
+	return 0;
+}
+
+static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = psmouse->dev;
+	struct alps_fields *f = &priv->f;
+
+	memset(f, 0, sizeof(struct alps_fields));
+	priv->decode_fields(f, packet, psmouse);
+	if (priv->multi_packet) {
+		/*
+		 * Sometimes the first packet will indicate a multi-packet
+		 * sequence, but sometimes the next multi-packet would not
+		 * come. Check for this, and when it happens process the
+		 * position packet as usual.
+		 */
+		if (f->is_mp) {
+			/* Now process the 1st packet */
+			priv->decode_fields(f, priv->multi_data, psmouse);
+		} else {
+			priv->multi_packet = 0;
+		}
+	}
+
+	/*
+	 * "f.is_mp" would always be '0' after merging the 1st and 2nd packet.
+	 * When it is set, it means 2nd packet comes without 1st packet come.
+	 */
+	if (f->is_mp)
+		return;
+
+	/* Save the first packet */
+	if (!priv->multi_packet && f->first_mp) {
+		priv->multi_packet = 1;
+		memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
+		return;
+	}
+
+	priv->multi_packet = 0;
+
+	alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4);
+
+	input_mt_report_finger_count(dev, f->fingers);
+
+	input_report_key(dev, BTN_LEFT, f->left);
+	input_report_key(dev, BTN_RIGHT, f->right);
+	input_report_key(dev, BTN_MIDDLE, f->middle);
+
+	input_report_abs(dev, ABS_PRESSURE, f->pressure);
+	input_sync(dev);
+}
+
+static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
+{
+	if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08))
+		return false;
+	if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0))
+		return false;
+	return true;
+}
+
 static DEFINE_MUTEX(alps_mutex);
 
 static void alps_register_bare_ps2_mouse(struct work_struct *work)
@@ -1314,8 +1492,12 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	 * a device connected to the external PS/2 port. Because bare PS/2
 	 * protocol does not have enough constant bits to self-synchronize
 	 * properly we only do this if the device is fully synchronized.
+	 * Can not distinguish V8's first byte from PS/2 packet's
 	 */
-	if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) {
+	if (priv->proto_version != ALPS_PROTO_V8 &&
+	    !psmouse->out_of_sync_cnt &&
+	    (psmouse->packet[0] & 0xc8) == 0x08) {
+
 		if (psmouse->pktcnt == 3) {
 			alps_report_bare_ps2_packet(psmouse, psmouse->packet,
 						    true);
@@ -1363,8 +1545,10 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 		return PSMOUSE_BAD_DATA;
 	}
 
-	if (priv->proto_version == ALPS_PROTO_V7 &&
-	    !alps_is_valid_package_v7(psmouse)) {
+	if ((priv->proto_version == ALPS_PROTO_V7 &&
+			!alps_is_valid_package_v7(psmouse)) ||
+	    (priv->proto_version == ALPS_PROTO_V8 &&
+			!alps_is_valid_package_ss4_v2(psmouse))) {
 		psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
 			    psmouse->pktcnt - 1,
 			    psmouse->packet[psmouse->pktcnt - 1]);
@@ -2139,6 +2323,88 @@ error:
 	return -1;
 }
 
+static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse,
+				      unsigned char index, unsigned char otp[])
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+	switch (index) {
+	case 0:
+		if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)  ||
+		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)  ||
+		    ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
+			return -1;
+
+		break;
+
+	case 1:
+		if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL)  ||
+		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL)  ||
+		    ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
+			return -1;
+
+		break;
+	}
+
+	return 0;
+}
+
+static int alps_update_device_area_ss4_v2(unsigned char otp[][4],
+					  struct alps_data *priv)
+{
+	int num_x_electrode;
+	int num_y_electrode;
+	int x_pitch, y_pitch, x_phys, y_phys;
+
+	num_x_electrode = SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F);
+	num_y_electrode = SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F);
+
+	priv->x_max = (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
+	priv->y_max = (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
+
+	x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM;
+	y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM;
+
+	x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */
+	y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */
+
+	priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
+	priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
+
+	return 0;
+}
+
+static int alps_update_btn_info_ss4_v2(unsigned char otp[][4],
+				       struct alps_data *priv)
+{
+	unsigned char is_btnless;
+
+	is_btnless = (otp[1][1] >> 3) & 0x01;
+
+	if (is_btnless)
+		priv->flags |= ALPS_BUTTONPAD;
+
+	return 0;
+}
+
+static int alps_set_defaults_ss4_v2(struct psmouse *psmouse,
+				    struct alps_data *priv)
+{
+	unsigned char otp[2][4];
+
+	memset(otp, 0, sizeof(otp));
+
+	if (alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]) ||
+	    alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]))
+		return -1;
+
+	alps_update_device_area_ss4_v2(otp, priv);
+
+	alps_update_btn_info_ss4_v2(otp, priv);
+
+	return 0;
+}
+
 static int alps_dolphin_get_device_area(struct psmouse *psmouse,
 					struct alps_data *priv)
 {
@@ -2231,6 +2497,35 @@ error:
 	return ret;
 }
 
+static int alps_hw_init_ss4_v2(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	char param[2] = {0x64, 0x28};
+	int ret = -1;
+
+	/* enter absolute mode */
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE)) {
+		goto error;
+	}
+
+	/* T.B.D. Decread noise packet number, delete in the future */
+	if (alps_exit_command_mode(psmouse) ||
+	    alps_enter_command_mode(psmouse) ||
+	    alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) {
+		goto error;
+	}
+	alps_exit_command_mode(psmouse);
+
+	return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+error:
+	alps_exit_command_mode(psmouse);
+	return ret;
+}
+
 static int alps_set_protocol(struct psmouse *psmouse,
 			     struct alps_data *priv,
 			     const struct alps_protocol_info *protocol)
@@ -2320,7 +2615,7 @@ static int alps_set_protocol(struct psmouse *psmouse,
 		priv->hw_init = alps_hw_init_v7;
 		priv->process_packet = alps_process_packet_v7;
 		priv->decode_fields = alps_decode_packet_v7;
-		priv->set_abs_params = alps_set_abs_params_mt;
+		priv->set_abs_params = alps_set_abs_params_v7;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
 		priv->x_max = 0xfff;
@@ -2330,6 +2625,19 @@ static int alps_set_protocol(struct psmouse *psmouse,
 			priv->flags |= ALPS_BUTTONPAD;
 
 		break;
+
+	case ALPS_PROTO_V8:
+		priv->hw_init = alps_hw_init_ss4_v2;
+		priv->process_packet = alps_process_packet_ss4_v2;
+		priv->decode_fields = alps_decode_ss4_v2;
+		priv->set_abs_params = alps_set_abs_params_ss4_v2;
+		priv->nibble_commands = alps_v3_nibble_commands;
+		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+
+		if (alps_set_defaults_ss4_v2(psmouse, priv))
+			return -EIO;
+
+		break;
 	}
 
 	return 0;
@@ -2398,6 +2706,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 		} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
 			   ec[2] >= 0x90 && ec[2] <= 0x9d) {
 			protocol = &alps_v3_protocol_data;
+		} else if (e7[0] == 0x73 && e7[1] == 0x03 &&
+			   e7[2] == 0x14 && ec[1] == 0x02) {
+			protocol = &alps_v8_protocol_data;
 		} else {
 			psmouse_dbg(psmouse,
 				    "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
@@ -2446,10 +2757,11 @@ static void alps_set_abs_params_st(struct alps_data *priv,
 {
 	input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
 	input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
+	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
 }
 
-static void alps_set_abs_params_mt(struct alps_data *priv,
-				   struct input_dev *dev1)
+static void alps_set_abs_params_mt_common(struct alps_data *priv,
+					  struct input_dev *dev1)
 {
 	input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
 	input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
@@ -2457,15 +2769,44 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
 	input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res);
 	input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res);
 
-	input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER |
-		INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT);
-
 	set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
 	set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+}
+
+static void alps_set_abs_params_mt(struct alps_data *priv,
+				   struct input_dev *dev1)
+{
+	alps_set_abs_params_mt_common(priv, dev1);
+	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
+
+	input_mt_init_slots(dev1, MAX_TOUCHES,
+			    INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+				INPUT_MT_TRACK | INPUT_MT_SEMI_MT);
+}
+
+static void alps_set_abs_params_v7(struct alps_data *priv,
+				   struct input_dev *dev1)
+{
+	alps_set_abs_params_mt_common(priv, dev1);
+	set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
+
+	input_mt_init_slots(dev1, MAX_TOUCHES,
+			    INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+				INPUT_MT_TRACK);
+
+	set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
+}
+
+static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
+				       struct input_dev *dev1)
+{
+	alps_set_abs_params_mt_common(priv, dev1);
+	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
+	set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
 
-	/* V7 is real multi-touch */
-	if (priv->proto_version == ALPS_PROTO_V7)
-		clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+	input_mt_init_slots(dev1, MAX_TOUCHES,
+			    INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+				INPUT_MT_TRACK);
 }
 
 int alps_init(struct psmouse *psmouse)
@@ -2498,9 +2839,6 @@ int alps_init(struct psmouse *psmouse)
 	dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
 
 	priv->set_abs_params(priv, dev1);
-	/* No pressure on V7 */
-	if (priv->proto_version != ALPS_PROTO_V7)
-		input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
 
 	if (priv->flags & ALPS_WHEEL) {
 		dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 02513c0502fc..6dfdccc3a7c6 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -22,14 +22,90 @@
 #define ALPS_PROTO_V5		0x500
 #define ALPS_PROTO_V6		0x600
 #define ALPS_PROTO_V7		0x700	/* t3btl t4s */
+#define ALPS_PROTO_V8		0x800	/* SS4btl SS4s */
 
-#define MAX_TOUCHES	2
+#define MAX_TOUCHES	4
 
 #define DOLPHIN_COUNT_PER_ELECTRODE	64
 #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
 #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
 
 /*
+ * enum SS4_PACKET_ID - defines the packet type for V8
+ * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
+ * SS4_PACKET_ID_ONE: There's one finger on touchpad
+ *  or there's button activities.
+ * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
+ * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+*/
+enum SS4_PACKET_ID {
+	SS4_PACKET_ID_IDLE = 0,
+	SS4_PACKET_ID_ONE,
+	SS4_PACKET_ID_TWO,
+	SS4_PACKET_ID_MULTI,
+};
+
+#define SS4_COUNT_PER_ELECTRODE		256
+#define SS4_NUMSENSOR_XOFFSET		7
+#define SS4_NUMSENSOR_YOFFSET		7
+#define SS4_MIN_PITCH_MM		50
+
+#define SS4_MASK_NORMAL_BUTTONS		0x07
+
+#define SS4_1F_X_V2(_b)		((_b[0] & 0x0007) |		\
+				 ((_b[1] << 3) & 0x0078) |	\
+				 ((_b[1] << 2) & 0x0380) |	\
+				 ((_b[2] << 5) & 0x1C00)	\
+				)
+
+#define SS4_1F_Y_V2(_b)		(((_b[2]) & 0x000F) |		\
+				 ((_b[3] >> 2) & 0x0030) |	\
+				 ((_b[4] << 6) & 0x03C0) |	\
+				 ((_b[4] << 5) & 0x0C00)	\
+				)
+
+#define SS4_1F_Z_V2(_b)		(((_b[5]) & 0x0F) |		\
+				 ((_b[5] >> 1) & 0x70) |	\
+				 ((_b[4]) & 0x80)		\
+				)
+
+#define SS4_1F_LFB_V2(_b)	(((_b[2] >> 4) & 0x01) == 0x01)
+
+#define SS4_MF_LF_V2(_b, _i)	((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
+
+#define SS4_BTN_V2(_b)		((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
+
+#define SS4_STD_MF_X_V2(_b, _i)	(((_b[0 + (_i) * 3] << 5) & 0x00E0) |	\
+				 ((_b[1 + _i * 3]  << 5) & 0x1F00)	\
+				)
+
+#define SS4_STD_MF_Y_V2(_b, _i)	(((_b[1 + (_i) * 3] << 3) & 0x0010) |	\
+				 ((_b[2 + (_i) * 3] << 5) & 0x01E0) |	\
+				 ((_b[2 + (_i) * 3] << 4) & 0x0E00)	\
+				)
+
+#define SS4_BTL_MF_X_V2(_b, _i)	(SS4_STD_MF_X_V2(_b, _i) |		\
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0010)	\
+				)
+
+#define SS4_BTL_MF_Y_V2(_b, _i)	(SS4_STD_MF_Y_V2(_b, _i) | \
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0008)	\
+				)
+
+#define SS4_MF_Z_V2(_b, _i)	(((_b[1 + (_i) * 3]) & 0x0001) |	\
+				 ((_b[1 + (_i) * 3] >> 1) & 0x0002)	\
+				)
+
+#define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10)
+#define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10)
+
+
+#define SS4_MFPACKET_NO_AX	8160	/* X-Coordinate value */
+#define SS4_MFPACKET_NO_AY	4080	/* Y-Coordinate value */
+#define SS4_MFPACKET_NO_AX_BL	8176	/* Buttonless X-Coordinate value */
+#define SS4_MFPACKET_NO_AY_BL	4088	/* Buttonless Y-Coordinate value */
+
+/*
  * enum V7_PACKET_ID - defines the packet type for V7
  * V7_PACKET_ID_IDLE: There's no finger and no button activity.
  * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h
index e100c1b31597..9b2dc015f20c 100644
--- a/drivers/input/mouse/elan_i2c.h
+++ b/drivers/input/mouse/elan_i2c.h
@@ -17,7 +17,7 @@
  */
 
 #ifndef _ELAN_I2C_H
-#define _ELAN_i2C_H
+#define _ELAN_I2C_H
 
 #include <linux/types.h>
 
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 7ce8bfe22d7e..375d98f47483 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -99,7 +99,7 @@ static int elan_enable_power(struct elan_tp_data *data)
 	error = regulator_enable(data->vcc);
 	if (error) {
 		dev_err(&data->client->dev,
-			"Failed to enable regulator: %d\n", error);
+			"failed to enable regulator: %d\n", error);
 		return error;
 	}
 
@@ -111,6 +111,7 @@ static int elan_enable_power(struct elan_tp_data *data)
 		msleep(30);
 	} while (--repeat > 0);
 
+	dev_err(&data->client->dev, "failed to enable power: %d\n", error);
 	return error;
 }
 
@@ -125,7 +126,7 @@ static int elan_disable_power(struct elan_tp_data *data)
 			error = regulator_disable(data->vcc);
 			if (error) {
 				dev_err(&data->client->dev,
-					"Failed to disable regulator: %d\n",
+					"failed to disable regulator: %d\n",
 					error);
 				/* Attempt to power the chip back up */
 				data->ops->power_control(data->client, true);
@@ -138,6 +139,7 @@ static int elan_disable_power(struct elan_tp_data *data)
 		msleep(30);
 	} while (--repeat > 0);
 
+	dev_err(&data->client->dev, "failed to disable power: %d\n", error);
 	return error;
 }
 
@@ -196,7 +198,6 @@ static int elan_initialize(struct elan_tp_data *data)
 		if (!error)
 			return 0;
 
-		repeat--;
 		msleep(30);
 	} while (--repeat > 0);
 
@@ -1084,16 +1085,18 @@ static int __maybe_unused elan_resume(struct device *dev)
 	}
 
 	error = elan_enable_power(data);
-	if (error)
+	if (error) {
 		dev_err(dev, "power up when resuming failed: %d\n", error);
+		goto err;
+	}
 
 	error = elan_initialize(data);
 	if (error)
 		dev_err(dev, "initialize when resuming failed: %d\n", error);
 
+err:
 	enable_irq(data->client->irq);
-
-	return 0;
+	return error;
 }
 
 static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume);
diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c
index 029941f861af..6cf0def6d35e 100644
--- a/drivers/input/mouse/elan_i2c_i2c.c
+++ b/drivers/input/mouse/elan_i2c_i2c.c
@@ -117,7 +117,15 @@ static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd)
 	int ret;
 
 	ret = i2c_transfer(client->adapter, &msg, 1);
-	return ret == 1 ? 0 : (ret < 0 ? ret : -EIO);
+	if (ret != 1) {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n",
+			reg, ret);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int elan_i2c_initialize(struct i2c_client *client)
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 23222dd5a66f..e5ed216824e9 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -256,8 +256,8 @@ static void lifebook_disconnect(struct psmouse *psmouse)
 
 int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 {
-        if (!lifebook_present)
-                return -1;
+	if (!lifebook_present)
+		return -1;
 
 	if (desired_serio_phys &&
 	    strcmp(psmouse->ps2dev.serio->phys, desired_serio_phys))
@@ -268,7 +268,7 @@ int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 		psmouse->name = "Lifebook TouchScreen";
 	}
 
-        return 0;
+	return 0;
 }
 
 static int lifebook_create_relative_device(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 8bc61237bc1b..27057df7ba74 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -474,19 +474,45 @@ static int psmouse_poll(struct psmouse *psmouse)
 			   PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
 }
 
+static bool psmouse_check_pnp_id(const char *id, const char * const ids[])
+{
+	int i;
+
+	for (i = 0; ids[i]; i++)
+		if (!strcasecmp(id, ids[i]))
+			return true;
+
+	return false;
+}
+
 /*
  * psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids.
  */
 bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[])
 {
-	int i;
-
-	if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4))
-		for (i = 0; ids[i]; i++)
-			if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i]))
-				return true;
+	struct serio *serio = psmouse->ps2dev.serio;
+	char *p, *fw_id_copy, *save_ptr;
+	bool found = false;
+
+	if (strncmp(serio->firmware_id, "PNP: ", 5))
+		return false;
+
+	fw_id_copy = kstrndup(&serio->firmware_id[5],
+			      sizeof(serio->firmware_id) - 5,
+			      GFP_KERNEL);
+	if (!fw_id_copy)
+		return false;
+
+	save_ptr = fw_id_copy;
+	while ((p = strsep(&fw_id_copy, " ")) != NULL) {
+		if (psmouse_check_pnp_id(p, ids)) {
+			found = true;
+			break;
+		}
+	}
 
-	return false;
+	kfree(save_ptr);
+	return found;
 }
 
 /*
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 3b06c8a360b6..630af73e98c4 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -67,6 +67,9 @@
 #define X_MAX_POSITIVE 8176
 #define Y_MAX_POSITIVE 8176
 
+/* maximum ABS_MT_POSITION displacement (in mm) */
+#define DMAX 10
+
 /*****************************************************************************
  *	Stuff we need even when we do not want native Synaptics support
  ****************************************************************************/
@@ -203,6 +206,13 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	NULL
 };
 
+/* This list has been kindly provided by Synaptics. */
+static const char * const forcepad_pnp_ids[] = {
+	"SYN300D",
+	"SYN3014",
+	NULL
+};
+
 /*****************************************************************************
  *	Synaptics communications functions
  ****************************************************************************/
@@ -687,8 +697,6 @@ static void synaptics_parse_ext_buttons(const unsigned char buf[],
 	hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
 }
 
-static bool is_forcepad;
-
 static int synaptics_parse_hw_state(const unsigned char buf[],
 				    struct synaptics_data *priv,
 				    struct synaptics_hw_state *hw)
@@ -718,7 +726,7 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (is_forcepad) {
+		if (priv->is_forcepad) {
 			/*
 			 * ForcePads, like Clickpads, use middle button
 			 * bits to report primary button clicks.
@@ -917,7 +925,7 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
 		pos[i].y = synaptics_invert_y(hw[i]->y);
 	}
 
-	input_mt_assign_slots(dev, slot, pos, nsemi, 0);
+	input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->x_res);
 
 	for (i = 0; i < nsemi; i++) {
 		input_mt_slot(dev, slot[i]);
@@ -1186,7 +1194,7 @@ static void set_input_params(struct psmouse *psmouse,
 					ABS_MT_POSITION_Y);
 		/* Image sensors can report per-contact pressure */
 		input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
-		input_mt_init_slots(dev, 2, INPUT_MT_POINTER | INPUT_MT_TRACK);
+		input_mt_init_slots(dev, 3, INPUT_MT_POINTER | INPUT_MT_TRACK);
 
 		/* Image sensors can signal 4 and 5 finger clicks */
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
@@ -1418,29 +1426,11 @@ static const struct dmi_system_id __initconst cr48_dmi_table[] = {
 	{ }
 };
 
-static const struct dmi_system_id forcepad_dmi_table[] __initconst = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Folio 1040 G1"),
-		},
-	},
-#endif
-	{ }
-};
-
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
 	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
 	cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
-
-	/*
-	 * Unfortunately ForcePad capability is not exported over PS/2,
-	 * so we have to resort to checking DMI.
-	 */
-	is_forcepad = dmi_check_system(forcepad_dmi_table);
 }
 
 static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
@@ -1475,6 +1465,12 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
 	if (SYN_ID_DISGEST_SUPPORTED(priv->identity))
 		priv->disable_gesture = true;
 
+	/*
+	 * Unfortunately ForcePad capability is not exported over PS/2,
+	 * so we have to resort to checking PNP IDs.
+	 */
+	priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids);
+
 	if (synaptics_set_mode(psmouse)) {
 		psmouse_err(psmouse, "Unable to initialize device.\n");
 		goto init_fail;
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index ee4bd0d12b26..56faa7ec4434 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -196,6 +196,7 @@ struct synaptics_data {
 	unsigned long				press_start;
 	bool					press;
 	bool					report_press;
+	bool					is_forcepad;
 };
 
 void synaptics_module_init(void);
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 94ab494a6ade..ecba666afadb 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -31,7 +31,6 @@
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
-#include <linux/pci_ids.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 986a71c614b0..cb5ece77fd7d 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1162,13 +1162,32 @@ static int i8042_controller_resume(bool force_reset)
 
 static int i8042_pm_suspend(struct device *dev)
 {
+	int i;
+
 	i8042_controller_reset(true);
 
+	/* Set up serio interrupts for system wakeup. */
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			enable_irq_wake(i8042_ports[i].irq);
+	}
+
 	return 0;
 }
 
 static int i8042_pm_resume(struct device *dev)
 {
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			disable_irq_wake(i8042_ports[i].irq);
+	}
+
 	/*
 	 * On resume from S2R we always try to reset the controller
 	 * to bring it in a sane state. (In case of S2D we expect
@@ -1300,13 +1319,16 @@ static void __init i8042_register_ports(void)
 	int i;
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
-		if (i8042_ports[i].serio) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio) {
 			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
-				i8042_ports[i].serio->name,
+				serio->name,
 				(unsigned long) I8042_DATA_REG,
 				(unsigned long) I8042_COMMAND_REG,
 				i8042_ports[i].irq);
-			serio_register_port(i8042_ports[i].serio);
+			serio_register_port(serio);
+			device_set_wakeup_capable(&serio->dev, true);
 		}
 	}
 }
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6261fd6d7c3c..547f67d65372 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -140,6 +140,19 @@ config TOUCHSCREEN_BU21013
 	  To compile this driver as a module, choose M here: the
 	  module will be called bu21013_ts.
 
+config TOUCHSCREEN_CHIPONE_ICN8318
+	tristate "chipone icn8318 touchscreen controller"
+	depends on GPIOLIB
+	depends on I2C
+	depends on OF
+	help
+	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8318.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
@@ -297,11 +310,12 @@ config TOUCHSCREEN_FUJITSU
 
 config TOUCHSCREEN_GOODIX
 	tristate "Goodix I2C touchscreen"
-	depends on I2C && ACPI
+	depends on I2C
 	help
 	  Say Y here if you have the Goodix touchscreen (such as one
 	  installed in Onda v975w tablets) connected to your
-	  system.
+	  system. It also supports 5-finger chip models, which can be
+	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 
 	  If unsure, say N.
 
@@ -323,6 +337,18 @@ config TOUCHSCREEN_ILI210X
 	  To compile this driver as a module, choose M here: the
 	  module will be called ili210x.
 
+config TOUCHSCREEN_IPROC
+	tristate "IPROC touch panel driver support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Say Y here if you want to add support for the IPROC touch
+	  controller to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm_iproc_tsc.
+
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
 	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
@@ -962,6 +988,17 @@ config TOUCHSCREEN_SUR40
 	  To compile this driver as a module, choose M here: the
 	  module will be called sur40.
 
+config TOUCHSCREEN_SX8654
+	tristate "Semtech SX8654 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx8654.
+
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 0242fea2102a..44deea743d02 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC)		+= bcm_iproc_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
@@ -79,5 +81,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
 obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index ba30578e296e..f0b954d46a25 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -157,7 +157,7 @@ static const struct i2c_device_id ar1021_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
 
-static struct of_device_id ar1021_i2c_of_match[] = {
+static const struct of_device_id ar1021_i2c_of_match[] = {
 	{ .compatible = "microchip,ar1021-i2c", },
 	{ }
 };
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 95ee92a91bd2..2875ddf37289 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 
 /* Version */
 #define MXT_VER_20		20
@@ -79,6 +80,7 @@
 #define MXT_SPT_DIGITIZER_T43		43
 #define MXT_SPT_MESSAGECOUNT_T44	44
 #define MXT_SPT_CTECONFIG_T46		46
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
 
 /* MXT_GEN_MESSAGE_T5 object */
 #define MXT_RPTID_NOMSG		0xff
@@ -185,6 +187,36 @@ struct t9_range {
 #define MXT_RESET_VALUE		0x01
 #define MXT_BACKUP_VALUE	0x55
 
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL		0
+#define MXT_T100_CFG1		1
+#define MXT_T100_TCHAUX		3
+#define MXT_T100_XRANGE		13
+#define MXT_T100_YRANGE		24
+
+#define MXT_T100_CFG_SWITCHXY	BIT(5)
+
+#define MXT_T100_TCHAUX_VECT	BIT(0)
+#define MXT_T100_TCHAUX_AMPL	BIT(1)
+#define MXT_T100_TCHAUX_AREA	BIT(2)
+
+#define MXT_T100_DETECT		BIT(7)
+#define MXT_T100_TYPE_MASK	0x70
+
+enum t100_type {
+	MXT_T100_TYPE_FINGER		= 1,
+	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
+	MXT_T100_TYPE_HOVERING_FINGER	= 4,
+	MXT_T100_TYPE_GLOVE		= 5,
+	MXT_T100_TYPE_LARGE_TOUCH	= 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH	0
+#define MXT_DISTANCE_HOVERING		1
+
+#define MXT_TOUCH_MAJOR_DEFAULT		1
+#define MXT_PRESSURE_DEFAULT		1
+
 /* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
@@ -244,6 +276,9 @@ struct mxt_data {
 	unsigned int max_y;
 	bool in_bootloader;
 	u16 mem_size;
+	u8 t100_aux_ampl;
+	u8 t100_aux_area;
+	u8 t100_aux_vect;
 	u8 max_reportid;
 	u32 config_crc;
 	u32 info_crc;
@@ -253,6 +288,7 @@ struct mxt_data {
 	bool update_input;
 	u8 last_message_count;
 	u8 num_touchids;
+	u8 multitouch;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -264,6 +300,8 @@ struct mxt_data {
 	u8 T9_reportid_max;
 	u8 T19_reportid;
 	u16 T44_address;
+	u8 T100_reportid_min;
+	u8 T100_reportid_max;
 
 	/* for fw update in bootloader */
 	struct completion bl_completion;
@@ -771,6 +809,114 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 	data->update_input = true;
 }
 
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	u8 type = 0;
+	u16 x;
+	u16 y;
+	int distance = 0;
+	int tool = 0;
+	u8 major = 0;
+	u8 pressure = 0;
+	u8 orientation = 0;
+
+	id = message[0] - data->T100_reportid_min - 2;
+
+	/* ignore SCRSTATUS events */
+	if (id < 0)
+		return;
+
+	status = message[1];
+	x = get_unaligned_le16(&message[2]);
+	y = get_unaligned_le16(&message[4]);
+
+	if (status & MXT_T100_DETECT) {
+		type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+		switch (type) {
+		case MXT_T100_TYPE_HOVERING_FINGER:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_HOVERING;
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_FINGER:
+		case MXT_T100_TYPE_GLOVE:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+			if (data->t100_aux_area)
+				major = message[data->t100_aux_area];
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_PASSIVE_STYLUS:
+			tool = MT_TOOL_PEN;
+
+			/*
+			 * Passive stylus is reported with size zero so
+			 * hardcode.
+			 */
+			major = MXT_TOUCH_MAJOR_DEFAULT;
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			break;
+
+		case MXT_T100_TYPE_LARGE_TOUCH:
+			/* Ignore suppressed touch */
+			break;
+
+		default:
+			dev_dbg(dev, "Unexpected T100 type\n");
+			return;
+		}
+	}
+
+	/*
+	 * Values reported should be non-zero if tool is touching the
+	 * device
+	 */
+	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+		pressure = MXT_PRESSURE_DEFAULT;
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T100_DETECT) {
+		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+			id, type, x, y, major, pressure, orientation);
+
+		input_mt_report_slot_state(input_dev, tool, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+	} else {
+		dev_dbg(dev, "[%u] release\n", id);
+
+		/* close out slot */
+		input_mt_report_slot_state(input_dev, 0, 0);
+	}
+
+	data->update_input = true;
+}
+
 static int mxt_proc_message(struct mxt_data *data, u8 *message)
 {
 	u8 report_id = message[0];
@@ -786,9 +932,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
 		 * is not yet registered.
 		 */
 		mxt_dump_message(data, message);
-	} else if (report_id >= data->T9_reportid_min
-	    && report_id <= data->T9_reportid_max) {
+	} else if (report_id >= data->T9_reportid_min &&
+		   report_id <= data->T9_reportid_max) {
 		mxt_proc_t9_message(data, message);
+	} else if (report_id >= data->T100_reportid_min &&
+		   report_id <= data->T100_reportid_max) {
+		mxt_proc_t100_message(data, message);
 	} else if (report_id == data->T19_reportid) {
 		mxt_input_button(data, message);
 		data->update_input = true;
@@ -1411,6 +1560,8 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T9_reportid_max = 0;
 	data->T19_reportid = 0;
 	data->T44_address = 0;
+	data->T100_reportid_min = 0;
+	data->T100_reportid_max = 0;
 	data->max_reportid = 0;
 }
 
@@ -1487,6 +1638,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 			data->T7_address = object->start_address;
 			break;
 		case MXT_TOUCH_MULTI_T9:
+			data->multitouch = MXT_TOUCH_MULTI_T9;
 			data->T9_reportid_min = min_id;
 			data->T9_reportid_max = max_id;
 			data->num_touchids = object->num_report_ids
@@ -1498,6 +1650,13 @@ static int mxt_get_object_table(struct mxt_data *data)
 		case MXT_SPT_GPIOPWM_T19:
 			data->T19_reportid = min_id;
 			break;
+		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+			data->T100_reportid_min = min_id;
+			data->T100_reportid_max = max_id;
+			/* first two report IDs reserved */
+			data->num_touchids = object->num_report_ids - 2;
+			break;
 		}
 
 		end_address = object->start_address
@@ -1582,22 +1741,138 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
 	return 0;
 }
 
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct mxt_object *object;
+	u16 range_x, range_y;
+	u8 cfg, tchaux;
+	u8 aux;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XRANGE,
+			       sizeof(range_x), &range_x);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_x);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YRANGE,
+			       sizeof(range_y), &range_y);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_CFG1,
+				1, &cfg);
+	if (error)
+		return error;
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_TCHAUX,
+				1, &tchaux);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range_x == 0)
+		range_x = 1023;
+
+	if (range_y == 0)
+		range_y = 1023;
+
+	if (cfg & MXT_T100_CFG_SWITCHXY) {
+		data->max_x = range_y;
+		data->max_y = range_x;
+	} else {
+		data->max_x = range_x;
+		data->max_y = range_y;
+	}
+
+	/* allocate aux bytes */
+	aux = 6;
+
+	if (tchaux & MXT_T100_TCHAUX_VECT)
+		data->t100_aux_vect = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AMPL)
+		data->t100_aux_ampl = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AREA)
+		data->t100_aux_area = aux++;
+
+	dev_dbg(&client->dev,
+		"T100 aux mappings vect:%u ampl:%u area:%u\n",
+		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+	dev_info(&client->dev,
+		 "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
 static int mxt_input_open(struct input_dev *dev);
 static void mxt_input_close(struct input_dev *dev);
 
-static int mxt_initialize_t9_input_device(struct mxt_data *data)
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+				   struct mxt_data *data)
 {
-	struct device *dev = &data->client->dev;
 	const struct mxt_platform_data *pdata = data->pdata;
+	int i;
+
+	input_dev->name = "Atmel maXTouch Touchpad";
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+			  MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+			  MXT_PIXELS_PER_MM);
+
+	for (i = 0; i < pdata->t19_num_keys; i++)
+		if (pdata->t19_keymap[i] != KEY_RESERVED)
+			input_set_capability(input_dev, EV_KEY,
+					     pdata->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct device *dev = &data->client->dev;
 	struct input_dev *input_dev;
 	int error;
 	unsigned int num_mt_slots;
 	unsigned int mt_flags = 0;
-	int i;
 
-	error = mxt_read_t9_resolution(data);
-	if (error)
-		dev_warn(dev, "Failed to initialize T9 resolution\n");
+	switch (data->multitouch) {
+	case MXT_TOUCH_MULTI_T9:
+		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+		error = mxt_read_t9_resolution(data);
+		if (error)
+			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		break;
+
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+		num_mt_slots = data->num_touchids;
+		error = mxt_read_t100_config(data);
+		if (error)
+			dev_warn(dev, "Failed to read T100 config\n");
+		break;
+
+	default:
+		dev_err(dev, "Invalid multitouch object\n");
+		return -EINVAL;
+	}
 
 	input_dev = input_allocate_device();
 	if (!input_dev) {
@@ -1612,54 +1887,76 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
 	input_dev->open = mxt_input_open;
 	input_dev->close = mxt_input_close;
 
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
 
-	if (pdata->t19_num_keys) {
-		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
 
-		for (i = 0; i < pdata->t19_num_keys; i++)
-			if (pdata->t19_keymap[i] != KEY_RESERVED)
-				input_set_capability(input_dev, EV_KEY,
-						     pdata->t19_keymap[i]);
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+	}
 
+	/* If device has buttons we assume it is a touchpad */
+	if (pdata->t19_num_keys) {
+		mxt_set_up_as_touchpad(input_dev, data);
 		mt_flags |= INPUT_MT_POINTER;
-
-		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
-				  MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
-				  MXT_PIXELS_PER_MM);
-
-		input_dev->name = "Atmel maXTouch Touchpad";
 	}
 
-	/* For single touch */
-	input_set_abs_params(input_dev, ABS_X,
-			     0, data->max_x, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y,
-			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE,
-			     0, 255, 0, 0);
-
 	/* For multi touch */
-	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
 	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
 	if (error) {
 		dev_err(dev, "Error %d initialising slots\n", error);
 		goto err_free_mem;
 	}
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			     0, MXT_MAX_AREA, 0, 0);
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+				     MXT_DISTANCE_ACTIVE_TOUCH,
+				     MXT_DISTANCE_HOVERING,
+				     0, 0);
+	}
+
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 			     0, data->max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
 			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_PRESSURE,
-			     0, 255, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_area)) {
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     0, MXT_MAX_AREA, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_ampl) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
 
 	input_set_drvdata(input_dev, data);
 
@@ -1765,9 +2062,13 @@ static int mxt_configure_objects(struct mxt_data *data,
 			dev_warn(dev, "Error %d updating config\n", error);
 	}
 
-	error = mxt_initialize_t9_input_device(data);
-	if (error)
-		return error;
+	if (data->multitouch) {
+		error = mxt_initialize_input_device(data);
+		if (error)
+			return error;
+	} else {
+		dev_warn(dev, "No touch object detected\n");
+	}
 
 	dev_info(dev,
 		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
@@ -2044,15 +2345,13 @@ static const struct attribute_group mxt_attr_group = {
 static void mxt_start(struct mxt_data *data)
 {
 	/* Touch enable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0x83);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
 	/* Touch disable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0);
 }
 
 static int mxt_input_open(struct input_dev *dev)
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
new file mode 100644
index 000000000000..ae460a5c93d5
--- /dev/null
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -0,0 +1,522 @@
+/*
+* Copyright (C) 2015 Broadcom Corporation
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation version 2.
+*
+* This program is distributed "as is" WITHOUT ANY WARRANTY of any
+* kind, whether express or implied; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/serio.h>
+
+#define IPROC_TS_NAME "iproc-ts"
+
+#define PEN_DOWN_STATUS     1
+#define PEN_UP_STATUS       0
+
+#define X_MIN               0
+#define Y_MIN               0
+#define X_MAX               0xFFF
+#define Y_MAX               0xFFF
+
+/* Value given by controller for invalid coordinate. */
+#define INVALID_COORD       0xFFFFFFFF
+
+/* Register offsets */
+#define REGCTL1             0x00
+#define REGCTL2             0x04
+#define INTERRUPT_THRES     0x08
+#define INTERRUPT_MASK      0x0c
+
+#define INTERRUPT_STATUS    0x10
+#define CONTROLLER_STATUS   0x14
+#define FIFO_DATA           0x18
+#define FIFO_DATA_X_Y_MASK  0xFFFF
+#define ANALOG_CONTROL      0x1c
+
+#define AUX_DATA            0x20
+#define DEBOUNCE_CNTR_STAT  0x24
+#define SCAN_CNTR_STAT      0x28
+#define REM_CNTR_STAT       0x2c
+
+#define SETTLING_TIMER_STAT 0x30
+#define SPARE_REG           0x34
+#define SOFT_BYPASS_CONTROL 0x38
+#define SOFT_BYPASS_DATA    0x3c
+
+
+/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */
+#define TS_PEN_INTR_MASK        BIT(0)
+#define TS_FIFO_INTR_MASK       BIT(2)
+
+/* Bit values for CONTROLLER_STATUS reg1 */
+#define TS_PEN_DOWN             BIT(0)
+
+/* Shift values for control reg1 */
+#define SCANNING_PERIOD_SHIFT   24
+#define DEBOUNCE_TIMEOUT_SHIFT  16
+#define SETTLING_TIMEOUT_SHIFT  8
+#define TOUCH_TIMEOUT_SHIFT     0
+
+/* Shift values for coordinates from fifo */
+#define X_COORD_SHIFT  0
+#define Y_COORD_SHIFT  16
+
+/* Bit values for REGCTL2 */
+#define TS_CONTROLLER_EN_BIT    BIT(16)
+#define TS_CONTROLLER_AVGDATA_SHIFT 8
+#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT)
+#define TS_CONTROLLER_PWR_LDO   BIT(5)
+#define TS_CONTROLLER_PWR_ADC   BIT(4)
+#define TS_CONTROLLER_PWR_BGP   BIT(3)
+#define TS_CONTROLLER_PWR_TS    BIT(2)
+#define TS_WIRE_MODE_BIT        BIT(1)
+
+#define dbg_reg(dev, priv, reg) \
+	dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+
+struct tsc_param {
+	/* Each step is 1024 us.  Valid 1-256 */
+	u32 scanning_period;
+
+	/*  Each step is 512 us.  Valid 0-255 */
+	u32 debounce_timeout;
+
+	/*
+	 * The settling duration (in ms) is the amount of time the tsc
+	 * waits to allow the voltage to settle after turning on the
+	 * drivers in detection mode. Valid values: 0-11
+	 *   0 =  0.008 ms
+	 *   1 =  0.01 ms
+	 *   2 =  0.02 ms
+	 *   3 =  0.04 ms
+	 *   4 =  0.08 ms
+	 *   5 =  0.16 ms
+	 *   6 =  0.32 ms
+	 *   7 =  0.64 ms
+	 *   8 =  1.28 ms
+	 *   9 =  2.56 ms
+	 *   10 = 5.12 ms
+	 *   11 = 10.24 ms
+	 */
+	u32 settling_timeout;
+
+	/* touch timeout in sample counts */
+	u32 touch_timeout;
+
+	/*
+	 * Number of data samples which are averaged before a final data point
+	 * is placed into the FIFO
+	 */
+	u32 average_data;
+
+	/* FIFO threshold */
+	u32 fifo_threshold;
+
+	/* Optional standard touchscreen properties. */
+	u32 max_x;
+	u32 max_y;
+	u32 fuzz_x;
+	u32 fuzz_y;
+	bool invert_x;
+	bool invert_y;
+};
+
+struct iproc_ts_priv {
+	struct platform_device *pdev;
+	struct input_dev *idev;
+
+	void __iomem *regs;
+	struct clk *tsc_clk;
+
+	int  pen_status;
+	struct tsc_param cfg_params;
+};
+
+/*
+ * Set default values the same as hardware reset values
+ * except for fifo_threshold with is set to 1.
+ */
+static const struct tsc_param iproc_default_config = {
+	.scanning_period  = 0x5,  /* 1 to 256 */
+	.debounce_timeout = 0x28, /* 0 to 255 */
+	.settling_timeout = 0x7,  /* 0 to 11 */
+	.touch_timeout    = 0xa,  /* 0 to 255 */
+	.average_data     = 5,    /* entry 5 = 32 pts */
+	.fifo_threshold   = 1,    /* 0 to 31 */
+	.max_x            = X_MAX,
+	.max_y            = Y_MAX,
+};
+
+static void ts_reg_dump(struct iproc_ts_priv *priv)
+{
+	struct device *dev = &priv->pdev->dev;
+
+	dbg_reg(dev, priv, REGCTL1);
+	dbg_reg(dev, priv, REGCTL2);
+	dbg_reg(dev, priv, INTERRUPT_THRES);
+	dbg_reg(dev, priv, INTERRUPT_MASK);
+	dbg_reg(dev, priv, INTERRUPT_STATUS);
+	dbg_reg(dev, priv, CONTROLLER_STATUS);
+	dbg_reg(dev, priv, FIFO_DATA);
+	dbg_reg(dev, priv, ANALOG_CONTROL);
+	dbg_reg(dev, priv, AUX_DATA);
+	dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT);
+	dbg_reg(dev, priv, SCAN_CNTR_STAT);
+	dbg_reg(dev, priv, REM_CNTR_STAT);
+	dbg_reg(dev, priv, SETTLING_TIMER_STAT);
+	dbg_reg(dev, priv, SPARE_REG);
+	dbg_reg(dev, priv, SOFT_BYPASS_CONTROL);
+	dbg_reg(dev, priv, SOFT_BYPASS_DATA);
+}
+
+static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct iproc_ts_priv *priv = platform_get_drvdata(pdev);
+	u32 intr_status;
+	u32 raw_coordinate;
+	u16 x;
+	u16 y;
+	int i;
+	bool needs_sync = false;
+
+	intr_status = readl(priv->regs + INTERRUPT_STATUS);
+	intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	if (intr_status == 0)
+		return IRQ_NONE;
+
+	/* Clear all interrupt status bits, write-1-clear */
+	writel(intr_status, priv->regs + INTERRUPT_STATUS);
+
+	/* Pen up/down */
+	if (intr_status & TS_PEN_INTR_MASK) {
+		if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+			priv->pen_status = PEN_DOWN_STATUS;
+		else
+			priv->pen_status = PEN_UP_STATUS;
+
+		input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+		needs_sync = true;
+
+		dev_dbg(&priv->pdev->dev,
+			"pen up-down (%d)\n", priv->pen_status);
+	}
+
+	/* coordinates in FIFO exceed the theshold */
+	if (intr_status & TS_FIFO_INTR_MASK) {
+		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
+			raw_coordinate = readl(priv->regs + FIFO_DATA);
+			if (raw_coordinate == INVALID_COORD)
+				continue;
+
+			/*
+			 * The x and y coordinate are 16 bits each
+			 * with the x in the lower 16 bits and y in the
+			 * upper 16 bits.
+			 */
+			x = (raw_coordinate >> X_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+			y = (raw_coordinate >> Y_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+
+			/* We only want to retain the 12 msb of the 16 */
+			x = (x >> 4) & 0x0FFF;
+			y = (y >> 4) & 0x0FFF;
+
+			/* adjust x y according to lcd tsc mount angle */
+			if (priv->cfg_params.invert_x)
+				x = priv->cfg_params.max_x - x;
+
+			if (priv->cfg_params.invert_y)
+				y = priv->cfg_params.max_y - y;
+
+			input_report_abs(priv->idev, ABS_X, x);
+			input_report_abs(priv->idev, ABS_Y, y);
+			needs_sync = true;
+
+			dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y);
+		}
+	}
+
+	if (needs_sync)
+		input_sync(priv->idev);
+
+	return IRQ_HANDLED;
+}
+
+static int iproc_ts_start(struct input_dev *idev)
+{
+	struct iproc_ts_priv *priv = input_get_drvdata(idev);
+	u32 val;
+	int error;
+
+	/* Enable clock */
+	error = clk_prepare_enable(priv->tsc_clk);
+	if (error) {
+		dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n",
+			__func__, error);
+		return error;
+	}
+
+	/*
+	 * Interrupt is generated when:
+	 *  FIFO reaches the int_th value, and pen event(up/down)
+	 */
+	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_MASK);
+
+	writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+
+	/* Initialize control reg1 */
+	val = 0;
+	val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT;
+	val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
+	writel(val, priv->regs + REGCTL1);
+
+	/* Try to clear all interrupt status */
+	val = readl(priv->regs + INTERRUPT_STATUS);
+	val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_STATUS);
+
+	/* Initialize control reg2 */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
+
+	val &= ~TS_CONTROLLER_AVGDATA_MASK;
+	val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
+
+	val &= ~(TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
+		   TS_CONTROLLER_PWR_ADC |	/* PWR up ADC */
+		   TS_CONTROLLER_PWR_BGP |	/* PWR up BGP */
+		   TS_CONTROLLER_PWR_TS);	/* PWR up TS */
+
+	writel(val, priv->regs + REGCTL2);
+
+	ts_reg_dump(priv);
+
+	return 0;
+}
+
+static void iproc_ts_stop(struct input_dev *dev)
+{
+	u32 val;
+	struct iproc_ts_priv *priv = input_get_drvdata(dev);
+
+	writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+
+	/* Only power down touch screen controller */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_PWR_TS;
+	writel(val, priv->regs + REGCTL2);
+
+	clk_disable(priv->tsc_clk);
+}
+
+static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv)
+{
+	struct device_node *np = dev->of_node;
+	u32 val;
+
+	priv->cfg_params = iproc_default_config;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+		if (val < 1 || val > 256) {
+			dev_err(dev, "scanning_period (%u) must be [1-256]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.scanning_period = val;
+	}
+
+	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "debounce_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.debounce_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
+		if (val > 11) {
+			dev_err(dev, "settling_timeout (%u) must be [0-11]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.settling_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "touch_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.touch_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "average_data", &val) >= 0) {
+		if (val > 8) {
+			dev_err(dev, "average_data (%u) must be [0-8]\n", val);
+			return -EINVAL;
+		}
+		priv->cfg_params.average_data = val;
+	}
+
+	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
+		if (val > 31) {
+			dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.fifo_threshold = val;
+	}
+
+	/* Parse optional properties. */
+	of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x);
+	of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y);
+
+	of_property_read_u32(np, "touchscreen-fuzz-x",
+			     &priv->cfg_params.fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y",
+			     &priv->cfg_params.fuzz_y);
+
+	priv->cfg_params.invert_x =
+		of_property_read_bool(np, "touchscreen-inverted-x");
+	priv->cfg_params.invert_y =
+		of_property_read_bool(np, "touchscreen-inverted-y");
+
+	return 0;
+}
+
+static int iproc_ts_probe(struct platform_device *pdev)
+{
+	struct iproc_ts_priv *priv;
+	struct input_dev *idev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* touchscreen controller memory mapped regs */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->regs)) {
+		error = PTR_ERR(priv->regs);
+		dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+		return error;
+	}
+
+	priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
+	if (IS_ERR(priv->tsc_clk)) {
+		error = PTR_ERR(priv->tsc_clk);
+		dev_err(&pdev->dev,
+			"failed getting clock tsc_clk: %d\n", error);
+		return error;
+	}
+
+	priv->pdev = pdev;
+	error = iproc_get_tsc_config(&pdev->dev, priv);
+	if (error) {
+		dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error);
+		return error;
+	}
+
+	idev = devm_input_allocate_device(&pdev->dev);
+	if (!idev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	priv->idev = idev;
+	priv->pen_status = PEN_UP_STATUS;
+
+	/* Set input device info  */
+	idev->name = IPROC_TS_NAME;
+	idev->dev.parent = &pdev->dev;
+
+	idev->id.bustype = BUS_HOST;
+	idev->id.vendor = SERIO_UNKNOWN;
+	idev->id.product = 0;
+	idev->id.version = 0;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	__set_bit(BTN_TOUCH, idev->keybit);
+
+	input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x,
+			     priv->cfg_params.fuzz_x, 0);
+	input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y,
+			     priv->cfg_params.fuzz_y, 0);
+
+	idev->open = iproc_ts_start;
+	idev->close = iproc_ts_stop;
+
+	input_set_drvdata(idev, priv);
+	platform_set_drvdata(pdev, priv);
+
+	/* get interrupt */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq);
+		return irq;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq,
+				 iproc_touchscreen_interrupt,
+				 IRQF_SHARED, IPROC_TS_NAME, pdev);
+	if (error)
+		return error;
+
+	error = input_register_device(priv->idev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id iproc_ts_of_match[] = {
+	{.compatible = "brcm,iproc-touchscreen", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, iproc_ts_of_match);
+
+static struct platform_driver iproc_ts_driver = {
+	.probe = iproc_ts_probe,
+	.driver = {
+		.name	= IPROC_TS_NAME,
+		.of_match_table = of_match_ptr(iproc_ts_of_match),
+	},
+};
+
+module_platform_driver(iproc_ts_driver);
+
+MODULE_DESCRIPTION("IPROC Touchscreen driver");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
new file mode 100644
index 000000000000..32e9db0e04bf
--- /dev/null
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -0,0 +1,316 @@
+/*
+ * Driver for ChipOne icn8318 i2c touchscreen controller
+ *
+ * Copyright (c) 2015 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define ICN8318_REG_POWER		4
+#define ICN8318_REG_TOUCHDATA		16
+
+#define ICN8318_POWER_ACTIVE		0
+#define ICN8318_POWER_MONITOR		1
+#define ICN8318_POWER_HIBERNATE		2
+
+#define ICN8318_MAX_TOUCHES		5
+
+struct icn8318_touch {
+	__u8 slot;
+	__be16 x;
+	__be16 y;
+	__u8 pressure;	/* Seems more like finger width then pressure really */
+	__u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8318_EVENT_NO_DATA	1 /* No finger seen yet since wakeup */
+#define ICN8318_EVENT_UPDATE1	2 /* New or updated coordinates */
+#define ICN8318_EVENT_UPDATE2	3 /* New or updated coordinates */
+#define ICN8318_EVENT_END	4 /* Finger lifted */
+} __packed;
+
+struct icn8318_touch_data {
+	__u8 softbutton;
+	__u8 touch_count;
+	struct icn8318_touch touches[ICN8318_MAX_TOUCHES];
+} __packed;
+
+struct icn8318_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *wake_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+static int icn8318_read_touch_data(struct i2c_client *client,
+				   struct icn8318_touch_data *touch_data)
+{
+	u8 reg = ICN8318_REG_TOUCHDATA;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(struct icn8318_touch_data),
+			.buf = (u8 *)touch_data
+		}
+	};
+
+	return i2c_transfer(client->adapter, msg, 2);
+}
+
+static inline bool icn8318_touch_active(u8 event)
+{
+	return (event == ICN8318_EVENT_UPDATE1) ||
+	       (event == ICN8318_EVENT_UPDATE2);
+}
+
+static irqreturn_t icn8318_irq(int irq, void *dev_id)
+{
+	struct icn8318_data *data = dev_id;
+	struct device *dev = &data->client->dev;
+	struct icn8318_touch_data touch_data;
+	int i, ret, x, y;
+
+	ret = icn8318_read_touch_data(data->client, &touch_data);
+	if (ret < 0) {
+		dev_err(dev, "Error reading touch data: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.softbutton) {
+		/*
+		 * Other data is invalid when a softbutton is pressed.
+		 * This needs some extra devicetree bindings to map the icn8318
+		 * softbutton codes to evdev codes. Currently no known devices
+		 * use this.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.touch_count > ICN8318_MAX_TOUCHES) {
+		dev_warn(dev, "Too much touches %d > %d\n",
+			 touch_data.touch_count, ICN8318_MAX_TOUCHES);
+		touch_data.touch_count = ICN8318_MAX_TOUCHES;
+	}
+
+	for (i = 0; i < touch_data.touch_count; i++) {
+		struct icn8318_touch *touch = &touch_data.touches[i];
+		bool act = icn8318_touch_active(touch->event);
+
+		input_mt_slot(data->input, touch->slot);
+		input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		x = be16_to_cpu(touch->x);
+		y = be16_to_cpu(touch->y);
+
+		if (data->invert_x)
+			x = data->max_x - x;
+
+		if (data->invert_y)
+			y = data->max_y - y;
+
+		if (!data->swap_x_y) {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
+		} else {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
+		}
+	}
+
+	input_mt_sync_frame(data->input);
+	input_sync(data->input);
+
+	return IRQ_HANDLED;
+}
+
+static int icn8318_start(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	enable_irq(data->client->irq);
+	gpiod_set_value_cansleep(data->wake_gpio, 1);
+
+	return 0;
+}
+
+static void icn8318_stop(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	disable_irq(data->client->irq);
+	i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER,
+				  ICN8318_POWER_HIBERNATE);
+	gpiod_set_value_cansleep(data->wake_gpio, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int icn8318_suspend(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_stop(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+
+static int icn8318_resume(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_start(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume);
+
+static int icn8318_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct icn8318_data *data;
+	struct input_dev *input;
+	u32 fuzz_x = 0, fuzz_y = 0;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "Error no irq specified\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(data->wake_gpio)) {
+		error = PTR_ERR(data->wake_gpio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Error getting wake gpio: %d\n", error);
+		return error;
+	}
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
+	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	/* Optional */
+	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
+	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
+	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = icn8318_start;
+	input->close = icn8318_stop;
+	input->dev.parent = dev;
+
+	if (!data->swap_x_y) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_x, fuzz_x, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_y, fuzz_y, 0);
+	} else {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_y, fuzz_y, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_x, fuzz_x, 0);
+	}
+
+	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	data->client = client;
+	data->input = input;
+	input_set_drvdata(input, data);
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq,
+					  IRQF_ONESHOT, client->name, data);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	/* Stop device till opened */
+	icn8318_stop(data->input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static const struct of_device_id icn8318_of_match[] = {
+	{ .compatible = "chipone,icn8318" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, icn8318_of_match);
+
+/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */
+static const struct i2c_device_id icn8318_i2c_id[] = {
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id);
+
+static struct i2c_driver icn8318_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "chipone_icn8318",
+		.pm	= &icn8318_pm_ops,
+		.of_match_table = icn8318_of_match,
+	},
+	.probe = icn8318_probe,
+	.id_table = icn8318_i2c_id,
+};
+
+module_i2c_driver(icn8318_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d4c24fb7704f..e6aef3e48bd9 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -37,6 +37,7 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/input/edt-ft5x06.h>
 
 #define MAX_SUPPORT_POINTS		5
@@ -1034,7 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
-	__set_bit(EV_SYN, input->evbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(BTN_TOUCH, input->keybit);
@@ -1044,6 +1044,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 			     0, tsdata->num_x * 64 - 1, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
+
+	if (!pdata)
+		touchscreen_parse_of_params(input);
+
 	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 926c58e540c0..43b3c9c2d788 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -98,7 +98,6 @@
 #define MAX_FW_UPDATE_RETRIES	30
 
 #define ELAN_FW_PAGESIZE	132
-#define ELAN_FW_FILENAME	"elants_i2c.bin"
 
 /* calibration timeout definition */
 #define ELAN_CALI_TIMEOUT_MSEC	10000
@@ -697,12 +696,19 @@ static int elants_i2c_fw_update(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
 	const struct firmware *fw;
+	char *fw_name;
 	int error;
 
-	error = request_firmware(&fw, ELAN_FW_FILENAME, &client->dev);
+	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version);
+	if (!fw_name)
+		return -ENOMEM;
+
+	dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
+	error = request_firmware(&fw, fw_name, &client->dev);
+	kfree(fw_name);
 	if (error) {
-		dev_err(&client->dev, "failed to request firmware %s: %d\n",
-			ELAN_FW_FILENAME, error);
+		dev_err(&client->dev, "failed to request firmware: %d\n",
+			error);
 		return error;
 	}
 
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index ca196689f025..3af16984d57c 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -23,6 +23,8 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
 #include <asm/unaligned.h>
 
 struct goodix_ts_data {
@@ -48,6 +50,7 @@ struct goodix_ts_data {
 #define GOODIX_REG_VERSION		0x8140
 
 #define RESOLUTION_LOC		1
+#define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
 
 static const unsigned long goodix_irq_flags[] = {
@@ -99,7 +102,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	}
 
 	touch_num = data[0] & 0x0f;
-	if (touch_num > GOODIX_MAX_CONTACTS)
+	if (touch_num > ts->max_touch_num)
 		return -EPROTO;
 
 	if (touch_num > 1) {
@@ -141,7 +144,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
  */
 static void goodix_process_events(struct goodix_ts_data *ts)
 {
-	u8  point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+	u8  point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num];
 	int touch_num;
 	int i;
 
@@ -202,21 +205,23 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
 		ts->int_trigger_type = GOODIX_INT_TRIGGER;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 		return;
 	}
 
 	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
 	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
-	ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
-	if (!ts->abs_x_max || !ts->abs_y_max) {
+	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
 		dev_err(&ts->client->dev,
 			"Invalid config, using defaults\n");
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 	}
 }
 
-
 /**
  * goodix_read_version - Read goodix touchscreen version
  *
@@ -295,7 +300,7 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
-	input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS,
+	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 
 	ts->input_dev->name = "Goodix Capacitive TouchScreen";
@@ -372,11 +377,27 @@ static const struct i2c_device_id goodix_ts_id[] = {
 	{ }
 };
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id goodix_acpi_match[] = {
 	{ "GDIX1001", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+	{ .compatible = "goodix,gt911" },
+	{ .compatible = "goodix,gt9110" },
+	{ .compatible = "goodix,gt912" },
+	{ .compatible = "goodix,gt927" },
+	{ .compatible = "goodix,gt9271" },
+	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt967" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
 
 static struct i2c_driver goodix_ts_driver = {
 	.probe = goodix_ts_probe,
@@ -384,7 +405,8 @@ static struct i2c_driver goodix_ts_driver = {
 	.driver = {
 		.name = "Goodix-TS",
 		.owner = THIS_MODULE,
-		.acpi_match_table = goodix_acpi_match,
+		.acpi_match_table = ACPI_PTR(goodix_acpi_match),
+		.of_match_table = of_match_ptr(goodix_of_match),
 	},
 };
 module_i2c_driver(goodix_ts_driver);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index f8f9b84230b1..b82b5207c78b 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -11,8 +11,41 @@
 
 #include <linux/of.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
 
+static u32 of_get_optional_u32(struct device_node *np,
+			       const char *property)
+{
+	u32 val = 0;
+
+	of_property_read_u32(np, property, &val);
+
+	return val;
+}
+
+static void touchscreen_set_params(struct input_dev *dev,
+				   unsigned long axis,
+				   int max, int fuzz)
+{
+	struct input_absinfo *absinfo;
+
+	if (!test_bit(axis, dev->absbit)) {
+		/*
+		 * Emit a warning only if the axis is not a multitouch
+		 * axis, which might not be set by the driver.
+		 */
+		if (!input_is_mt_axis(axis))
+			dev_warn(&dev->dev,
+				 "DT specifies parameters but the axis is not set up\n");
+		return;
+	}
+
+	absinfo = &dev->absinfo[axis];
+	absinfo->maximum = max;
+	absinfo->fuzz = fuzz;
+}
+
 /**
  * touchscreen_parse_of_params - parse common touchscreen DT properties
  * @dev: device that should be parsed
@@ -24,22 +57,31 @@
 void touchscreen_parse_of_params(struct input_dev *dev)
 {
 	struct device_node *np = dev->dev.parent->of_node;
-	struct input_absinfo *absinfo;
+	u32 maximum, fuzz;
 
 	input_alloc_absinfo(dev);
 	if (!dev->absinfo)
 		return;
 
-	absinfo = &dev->absinfo[ABS_X];
-	of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-x");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_X, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_Y];
-	of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-y");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_Y, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_PRESSURE];
-	of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-max-pressure");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz);
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_of_params);
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index b93a28b955fd..c0116994067d 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -30,6 +30,10 @@
  * These kinds of heuristics are just asking for trouble (and don't belong
  * in the kernel). So this driver offers straight forward, reliable single
  * touch functionality only.
+ *
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * (looks like the description in the A20 User Manual v1.3 is better
+ * than the one in the A10 User Manual v.1.5)
  */
 
 #include <linux/err.h>
@@ -193,7 +197,7 @@ static int sun4i_get_temp(const struct sun4i_ts_data *ts, long *temp)
 	if (ts->temp_data == -1)
 		return -EAGAIN;
 
-	*temp = (ts->temp_data - ts->temp_offset) * ts->temp_step;
+	*temp = ts->temp_data * ts->temp_step - ts->temp_offset;
 
 	return 0;
 }
@@ -246,6 +250,8 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	int error;
 	u32 reg;
 	bool ts_attached;
+	u32 tp_sensitive_adjust = 15;
+	u32 filter_type = 1;
 
 	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
 	if (!ts)
@@ -255,22 +261,31 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	ts->ignore_fifo_data = true;
 	ts->temp_data = -1;
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
-		/* Allwinner SDK has temperature = -271 + (value / 6) (C) */
-		ts->temp_offset = 1626;
+		/* Allwinner SDK has temperature (C) = (value / 6) - 271 */
+		ts->temp_offset = 271000;
 		ts->temp_step = 167;
+	} else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
+		/*
+		 * The A10 temperature sensor has quite a wide spread, these
+		 * parameters are based on the averaging of the calibration
+		 * results of 4 completely different boards, with a spread of
+		 * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
+		 */
+		ts->temp_offset = 257000;
+		ts->temp_step = 133;
 	} else {
 		/*
 		 * The user manuals do not contain the formula for calculating
 		 * the temperature. The formula used here is from the AXP209,
 		 * which is designed by X-Powers, an affiliate of Allwinner:
 		 *
-		 *     temperature = -144.7 + (value * 0.1)
+		 *     temperature (C) = (value * 0.1) - 144.7
 		 *
 		 * Allwinner does not have any documentation whatsoever for
 		 * this hardware. Moreover, it is claimed that the sensor
 		 * is inaccurate and cannot work properly.
 		 */
-		ts->temp_offset = 1447;
+		ts->temp_offset = 144700;
 		ts->temp_step = 100;
 	}
 
@@ -313,14 +328,20 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	       ts->base + TP_CTRL0);
 
 	/*
-	 * sensitive_adjust = 15 : max, which is not all that sensitive,
+	 * tp_sensitive_adjust is an optional property
 	 * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
 	 */
-	writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
+	of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
+			     &tp_sensitive_adjust);
+	writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
 	       ts->base + TP_CTRL2);
 
-	/* Enable median filter, type 1 : 5/3 */
-	writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
+	/*
+	 * Enable median and averaging filter, optional property for
+	 * filter type.
+	 */
+	of_property_read_u32(np, "allwinner,filter-type", &filter_type);
+	writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
 
 	/* Enable temperature measurement, period 1953 (2 seconds) */
 	writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
@@ -330,10 +351,10 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	 * finally enable tp mode.
 	 */
 	reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
-	if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts"))
-		reg |= TP_MODE_EN(1);
-	else
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
 		reg |= SUN6I_TP_MODE_EN(1);
+	else
+		reg |= TP_MODE_EN(1);
 	writel(reg, ts->base + TP_CTRL1);
 
 	/*
@@ -383,6 +404,7 @@ static int sun4i_ts_remove(struct platform_device *pdev)
 
 static const struct of_device_id sun4i_ts_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-ts", },
+	{ .compatible = "allwinner,sun5i-a13-ts", },
 	{ .compatible = "allwinner,sun6i-a31-ts", },
 	{ /* sentinel */ }
 };
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
new file mode 100644
index 000000000000..aecb9ad2e701
--- /dev/null
+++ b/drivers/input/touchscreen/sx8654.c
@@ -0,0 +1,286 @@
+/*
+ * Driver for Semtech SX8654 I2C touchscreen controller.
+ *
+ * Copyright (c) 2015 Armadeus Systems
+ *	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
+ *
+ * Using code from:
+ *  - sx865x.c
+ *	Copyright (c) 2013 U-MoBo Srl
+ *	Pierluigi Passaro <p.passaro@u-mobo.com>
+ *  - sx8650.c
+ *      Copyright (c) 2009 Wayne Roberts
+ *  - tsc2007.c
+ *      Copyright (c) 2008 Kwangwoo Lee
+ *  - ads7846.c
+ *      Copyright (c) 2005 David Brownell
+ *      Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *      Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *      Copyright (C) 2002 MontaVista Software
+ *      Copyright (C) 2004 Texas Instruments
+ *      Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+/* register addresses */
+#define I2C_REG_TOUCH0			0x00
+#define I2C_REG_TOUCH1			0x01
+#define I2C_REG_CHANMASK		0x04
+#define I2C_REG_IRQMASK			0x22
+#define I2C_REG_IRQSRC			0x23
+#define I2C_REG_SOFTRESET		0x3f
+
+/* commands */
+#define CMD_READ_REGISTER		0x40
+#define CMD_MANUAL			0xc0
+#define CMD_PENTRG			0xe0
+
+/* value for I2C_REG_SOFTRESET */
+#define SOFTRESET_VALUE			0xde
+
+/* bits for I2C_REG_IRQSRC */
+#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
+#define IRQ_PENRELEASE			0x04
+
+/* bits for RegTouch1 */
+#define CONDIRQ				0x20
+#define FILT_7SA			0x03
+
+/* bits for I2C_REG_CHANMASK */
+#define CONV_X				0x80
+#define CONV_Y				0x40
+
+/* coordinates rate: higher nibble of CTRL0 register */
+#define RATE_MANUAL			0x00
+#define RATE_5000CPS			0xf0
+
+/* power delay: lower nibble of CTRL0 register */
+#define POWDLY_1_1MS			0x0b
+
+#define MAX_12BIT			((1 << 12) - 1)
+
+struct sx8654 {
+	struct input_dev *input;
+	struct i2c_client *client;
+};
+
+static irqreturn_t sx8654_irq(int irq, void *handle)
+{
+	struct sx8654 *sx8654 = handle;
+	int irqsrc;
+	u8 data[4];
+	unsigned int x, y;
+	int retval;
+
+	irqsrc = i2c_smbus_read_byte_data(sx8654->client,
+					  CMD_READ_REGISTER | I2C_REG_IRQSRC);
+	dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
+
+	if (irqsrc < 0)
+		goto out;
+
+	if (irqsrc & IRQ_PENRELEASE) {
+		dev_dbg(&sx8654->client->dev, "pen release interrupt");
+
+		input_report_key(sx8654->input, BTN_TOUCH, 0);
+		input_sync(sx8654->input);
+	}
+
+	if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
+		dev_dbg(&sx8654->client->dev, "pen touch interrupt");
+
+		retval = i2c_master_recv(sx8654->client, data, sizeof(data));
+		if (retval != sizeof(data))
+			goto out;
+
+		/* invalid data */
+		if (unlikely(data[0] & 0x80 || data[2] & 0x80))
+			goto out;
+
+		x = ((data[0] & 0xf) << 8) | (data[1]);
+		y = ((data[2] & 0xf) << 8) | (data[3]);
+
+		input_report_abs(sx8654->input, ABS_X, x);
+		input_report_abs(sx8654->input, ABS_Y, y);
+		input_report_key(sx8654->input, BTN_TOUCH, 1);
+		input_sync(sx8654->input);
+
+		dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int sx8654_open(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	/* enable pen trigger mode */
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
+					  RATE_5000CPS | POWDLY_1_1MS);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte(client, CMD_PENTRG);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_PENTRG failed");
+		return error;
+	}
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void sx8654_close(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	disable_irq(client->irq);
+
+	/* enable manual mode mode */
+	error = i2c_smbus_write_byte(client, CMD_MANUAL);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_MANUAL failed");
+		return;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return;
+	}
+}
+
+static int sx8654_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct sx8654 *sx8654;
+	struct input_dev *input;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENXIO;
+
+	sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
+	if (!sx8654)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!sx8654)
+		return -ENOMEM;
+
+	input->name = "SX8654 I2C Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = sx8654_open;
+	input->close = sx8654_close;
+
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+	sx8654->client = client;
+	sx8654->input = input;
+
+	input_set_drvdata(sx8654->input, sx8654);
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
+					  SOFTRESET_VALUE);
+	if (error) {
+		dev_err(&client->dev, "writing softreset value failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
+					  CONV_X | CONV_Y);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+					  IRQ_PENTOUCH_TOUCHCONVDONE |
+						IRQ_PENRELEASE);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
+					  CONDIRQ | FILT_7SA);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, sx8654_irq,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, sx8654);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ %d, error: %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	/* Disable the IRQ, we'll enable it in sx8654_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(sx8654->input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, sx8654);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sx8654_of_match[] = {
+	{ .compatible = "semtech,sx8654", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sx8654_of_match);
+#endif
+
+static const struct i2c_device_id sx8654_id_table[] = {
+	{ "semtech_sx8654", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
+
+static struct i2c_driver sx8654_driver = {
+	.driver = {
+		.name = "sx8654",
+		.of_match_table = of_match_ptr(sx8654_of_match),
+	},
+	.id_table = sx8654_id_table,
+	.probe = sx8654_probe,
+};
+module_i2c_driver(sx8654_driver);
+
+MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
+MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 1bf9906b5a3f..ccc8aa615709 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -75,7 +75,7 @@ struct tsc2007 {
 	u16			model;
 	u16			x_plate_ohms;
 	u16			max_rt;
-	unsigned long		poll_period;
+	unsigned long		poll_period; /* in jiffies */
 	int			fuzzx;
 	int			fuzzy;
 	int			fuzzz;
@@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 			dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
 		}
 
-		wait_event_timeout(ts->wait, ts->stopped,
-				   msecs_to_jiffies(ts->poll_period));
+		wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
 	}
 
 	dev_dbg(&ts->client->dev, "UP\n");
@@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
 		ts->fuzzz = val32;
 
 	if (!of_property_read_u64(np, "ti,poll-period", &val64))
-		ts->poll_period = val64;
+		ts->poll_period = msecs_to_jiffies(val64);
 	else
-		ts->poll_period = 1;
+		ts->poll_period = msecs_to_jiffies(1);
 
 	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
 		ts->x_plate_ohms = val32;
@@ -350,7 +349,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
-	ts->poll_period       = pdata->poll_period ? : 1;
+	ts->poll_period       = msecs_to_jiffies(pdata->poll_period ? : 1);
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
 	ts->fuzzx             = pdata->fuzzx;
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index a0966331a89b..f2c6c352c55a 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -132,6 +132,7 @@ enum {
 	DEVTYPE_GUNZE,
 	DEVTYPE_DMC_TSC10,
 	DEVTYPE_IRTOUCH,
+	DEVTYPE_IRTOUCH_HIRES,
 	DEVTYPE_IDEALTEK,
 	DEVTYPE_GENERAL_TOUCH,
 	DEVTYPE_GOTOP,
@@ -198,6 +199,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
@@ -1177,6 +1179,15 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.rept_size	= 8,
 		.read_data	= irtouch_read_data,
 	},
+
+	[DEVTYPE_IRTOUCH_HIRES] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK