mfd: Refactor wm831x AUXADC handling into a separate file

In preparation for some additional work on the wm831x AUXADC code move the
support into a separate file. This is a simple code motion patch, there
should be no functional changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 1 insertions, 166 deletions

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 480abc18f9f3..772fe584f3b8 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -306,161 +306,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(wm831x_set_bits);
 
-/**
- * wm831x_auxadc_read: Read a value from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
-	int ret, src, irq_masked, timeout;
-
-	/* Are we using the interrupt? */
-	irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
-	irq_masked &= WM831X_AUXADC_DATA_EINT;
-
-	mutex_lock(&wm831x->auxadc_lock);
-
-	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
-			      WM831X_AUX_ENA, WM831X_AUX_ENA);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
-		goto out;
-	}
-
-	/* We force a single source at present */
-	src = input;
-	ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
-			       1 << src);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
-		goto out;
-	}
-
-	/* Clear any notification from a very late arriving interrupt */
-	try_wait_for_completion(&wm831x->auxadc_done);
-
-	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
-			      WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
-		goto disable;
-	}
-
-	if (irq_masked) {
-		/* If we're not using interrupts then poll the
-		 * interrupt status register */
-		timeout = 5;
-		while (timeout) {
-			msleep(1);
-
-			ret = wm831x_reg_read(wm831x,
-					      WM831X_INTERRUPT_STATUS_1);
-			if (ret < 0) {
-				dev_err(wm831x->dev,
-					"ISR 1 read failed: %d\n", ret);
-				goto disable;
-			}
-
-			/* Did it complete? */
-			if (ret & WM831X_AUXADC_DATA_EINT) {
-				wm831x_reg_write(wm831x,
-						 WM831X_INTERRUPT_STATUS_1,
-						 WM831X_AUXADC_DATA_EINT);
-				break;
-			} else {
-				dev_err(wm831x->dev,
-					"AUXADC conversion timeout\n");
-				ret = -EBUSY;
-				goto disable;
-			}
-		}
-
-		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-		if (ret < 0) {
-			dev_err(wm831x->dev,
-				"Failed to read AUXADC data: %d\n", ret);
-			goto disable;
-		}
-
-		wm831x->auxadc_data = ret;
-
-	} else {
-		/* If we are using interrupts then wait for the
-		 * interrupt to complete.  Use an extremely long
-		 * timeout to handle situations with heavy load where
-		 * the notification of the interrupt may be delayed by
-		 * threaded IRQ handling. */
-		if (!wait_for_completion_timeout(&wm831x->auxadc_done,
-						 msecs_to_jiffies(500))) {
-			dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
-			ret = -EBUSY;
-			goto disable;
-		}
-	}
-
-	src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK)
-	       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
-	if (src == 14)
-		src = WM831X_AUX_CAL;
-
-	if (src != input) {
-		dev_err(wm831x->dev, "Data from source %d not %d\n",
-			src, input);
-		ret = -EINVAL;
-	} else {
-		ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK;
-	}
-
-disable:
-	wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
-out:
-	mutex_unlock(&wm831x->auxadc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
-
-static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
-{
-	struct wm831x *wm831x = irq_data;
-	int ret;
-
-	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-	if (ret < 0) {
-		dev_err(wm831x->dev,
-			"Failed to read AUXADC data: %d\n", ret);
-		wm831x->auxadc_data = 0xffff;
-	} else {
-		wm831x->auxadc_data = ret;
-	}
-
-	complete(&wm831x->auxadc_done);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
-	int ret;
-
-	ret = wm831x_auxadc_read(wm831x, input);
-	if (ret < 0)
-		return ret;
-
-	ret *= 1465;
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
-
 static struct resource wm831x_dcdc1_resources[] = {
 	{
 		.start = WM831X_DC1_CONTROL_1,
@@ -1447,8 +1292,6 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 
 	mutex_init(&wm831x->io_lock);
 	mutex_init(&wm831x->key_lock);
-	mutex_init(&wm831x->auxadc_lock);
-	init_completion(&wm831x->auxadc_done);
 	dev_set_drvdata(wm831x->dev, wm831x);
 
 	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
@@ -1603,15 +1446,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	if (ret != 0)
 		goto err;
 
-	if (wm831x->irq_base) {
-		ret = request_threaded_irq(wm831x->irq_base +
-					   WM831X_IRQ_AUXADC_DATA,
-					   NULL, wm831x_auxadc_irq, 0,
-					   "auxadc", wm831x);
-		if (ret < 0)
-			dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
-				ret);
-	}
+	wm831x_auxadc_init(wm831x);
 
 	/* The core device is up, instantiate the subdevices. */
 	switch (parent) {