net: dsa: Get information about stacked DSA protocol

It is possible to stack multiple DSA switches in a way that they are not
part of the tree (disjoint) but the DSA master of a switch is a DSA
slave of another. When that happens switch drivers may have to know this
is the case so as to determine whether their tagging protocol has a
remove chance of working.

This is useful for specific switch drivers such as b53 where devices
have been known to be stacked in the wild without the Broadcom tag
protocol supporting that feature. This allows b53 to continue supporting
those devices by forcing the disabling of Broadcom tags on the outermost
switches if necessary.

The get_tag_protocol() function is therefore updated to gain an
additional enum dsa_tag_protocol argument which denotes the current
tagging protocol used by the DSA master we are attached to, else
DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 14 insertions, 8 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index edacacfc9365..2b530a31ef0f 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -573,9 +573,8 @@ EXPORT_SYMBOL(b53_disable_port);
 
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 {
-	bool tag_en = !(ds->ops->get_tag_protocol(ds, port) ==
-			 DSA_TAG_PROTO_NONE);
 	struct b53_device *dev = ds->priv;
+	bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
 	u8 hdr_ctl, val;
 	u16 reg;
 
@@ -1876,7 +1875,8 @@ static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port)
 	return ret;
 }
 
-enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port)
+enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
+					   enum dsa_tag_protocol mprot)
 {
 	struct b53_device *dev = ds->priv;
 
@@ -1886,16 +1886,22 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port)
 	 * misses on multicast addresses (TBD).
 	 */
 	if (is5325(dev) || is5365(dev) || is539x(dev) || is531x5(dev) ||
-	    !b53_can_enable_brcm_tags(ds, port))
-		return DSA_TAG_PROTO_NONE;
+	    !b53_can_enable_brcm_tags(ds, port)) {
+		dev->tag_protocol = DSA_TAG_PROTO_NONE;
+		goto out;
+	}
 
 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
 	 * which requires us to use the prepended Broadcom tag type
 	 */
-	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT)
-		return DSA_TAG_PROTO_BRCM_PREPEND;
+	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
+		goto out;
+	}
 
-	return DSA_TAG_PROTO_BRCM;
+	dev->tag_protocol = DSA_TAG_PROTO_BRCM;
+out:
+	return dev->tag_protocol;
 }
 EXPORT_SYMBOL(b53_get_tag_protocol);