aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
authorVladimir Oltean <olteanv@gmail.com>2019-06-08 16:03:44 +0300
committerDavid S. Miller <davem@davemloft.net>2019-06-09 19:58:59 -0700
commit8400cff60b472cc1c698b932e8b93d3bb900c5a0 (patch)
tree775f486def6546281546f9cc5f646155dab61ae7 /drivers/net/dsa
parentnet: dsa: sja1105: Export the sja1105_inhibit_tx function (diff)
downloadlinux-dev-8400cff60b472cc1c698b932e8b93d3bb900c5a0.tar.xz
linux-dev-8400cff60b472cc1c698b932e8b93d3bb900c5a0.zip
net: dsa: sja1105: Rethink the PHYLINK callbacks
The first fact that needs to be stated is that the per-MAC settings in SJA1105 called EGRESS and INGRESS do *not* disable egress and ingress on the MAC. They only prevent non-link-local traffic from being sent/received on this port. So instead of having .phylink_mac_config essentially mess with the STP state and force it to DISABLED/BLOCKING (which also brings useless complications in sja1105_static_config_reload), simply add the .phylink_mac_link_down and .phylink_mac_link_up callbacks which inhibit TX at the MAC level, while leaving RX essentially enabled. Also stop from trying to put the link down in .phylink_mac_config, which is incorrect. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c114
1 files changed, 40 insertions, 74 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index faf0fceed0d7..81e1ba5add5f 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -695,18 +695,10 @@ static int sja1105_speed[] = {
[SJA1105_SPEED_1000MBPS] = SPEED_1000,
};
-/* Set link speed and enable/disable traffic I/O in the MAC configuration
- * for a specific port.
- *
- * @speed_mbps: If 0, leave the speed unchanged, else adapt MAC to PHY speed.
- * @enabled: Manage Rx and Tx settings for this port. If false, overrides the
- * settings from the STP state, but not persistently (does not
- * overwrite the static MAC info for this port).
- */
+/* Set link speed in the MAC configuration for a specific port. */
static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
- int speed_mbps, bool enabled)
+ int speed_mbps)
{
- struct sja1105_mac_config_entry dyn_mac;
struct sja1105_xmii_params_entry *mii;
struct sja1105_mac_config_entry *mac;
struct device *dev = priv->ds->dev;
@@ -714,8 +706,14 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
sja1105_speed_t speed;
int rc;
- mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
+ /* On P/Q/R/S, one can read from the device via the MAC reconfiguration
+ * tables. On E/T, MAC reconfig tables are not readable, only writable.
+ * We have to *know* what the MAC looks like. For the sake of keeping
+ * the code common, we'll use the static configuration tables as a
+ * reasonable approximation for both E/T and P/Q/R/S.
+ */
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
+ mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
switch (speed_mbps) {
case SPEED_UNKNOWN:
@@ -736,26 +734,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
return -EINVAL;
}
- /* If requested, overwrite SJA1105_SPEED_AUTO from the static MAC
- * configuration table, since this will be used for the clocking setup,
- * and we no longer need to store it in the static config (already told
- * hardware we want auto during upload phase).
+ /* Overwrite SJA1105_SPEED_AUTO from the static MAC configuration
+ * table, since this will be used for the clocking setup, and we no
+ * longer need to store it in the static config (already told hardware
+ * we want auto during upload phase).
*/
mac[port].speed = speed;
- /* On P/Q/R/S, one can read from the device via the MAC reconfiguration
- * tables. On E/T, MAC reconfig tables are not readable, only writable.
- * We have to *know* what the MAC looks like. For the sake of keeping
- * the code common, we'll use the static configuration tables as a
- * reasonable approximation for both E/T and P/Q/R/S.
- */
- dyn_mac = mac[port];
- dyn_mac.ingress = enabled && mac[port].ingress;
- dyn_mac.egress = enabled && mac[port].egress;
-
/* Write to the dynamic reconfiguration tables */
- rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG,
- port, &dyn_mac, true);
+ rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port,
+ &mac[port], true);
if (rc < 0) {
dev_err(dev, "Failed to write MAC config: %d\n", rc);
return rc;
@@ -767,9 +755,6 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
* the clock setup does interrupt the clock signal for a certain time
* which causes trouble for all PHYs relying on this signal.
*/
- if (!enabled)
- return 0;
-
phy_mode = mii->xmii_mode[port];
if (phy_mode != XMII_MODE_RGMII)
return 0;
@@ -784,9 +769,24 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port,
struct sja1105_private *priv = ds->priv;
if (!state->link)
- sja1105_adjust_port_config(priv, port, SPEED_UNKNOWN, false);
- else
- sja1105_adjust_port_config(priv, port, state->speed, true);
+ return;
+
+ sja1105_adjust_port_config(priv, port, state->speed);
+}
+
+static void sja1105_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ sja1105_inhibit_tx(ds->priv, BIT(port), true);
+}
+
+static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+{
+ sja1105_inhibit_tx(ds->priv, BIT(port), false);
}
static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
@@ -1241,27 +1241,6 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
sja1105_bridge_member(ds, port, br, false);
}
-static u8 sja1105_stp_state_get(struct sja1105_private *priv, int port)
-{
- struct sja1105_mac_config_entry *mac;
-
- mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
-
- if (!mac[port].ingress && !mac[port].egress && !mac[port].dyn_learn)
- return BR_STATE_BLOCKING;
- if (mac[port].ingress && !mac[port].egress && !mac[port].dyn_learn)
- return BR_STATE_LISTENING;
- if (mac[port].ingress && !mac[port].egress && mac[port].dyn_learn)
- return BR_STATE_LEARNING;
- if (mac[port].ingress && mac[port].egress && mac[port].dyn_learn)
- return BR_STATE_FORWARDING;
- /* This is really an error condition if the MAC was in none of the STP
- * states above. But treating the port as disabled does nothing, which
- * is adequate, and it also resets the MAC to a known state later on.
- */
- return BR_STATE_DISABLED;
-}
-
/* For situations where we need to change a setting at runtime that is only
* available through the static configuration, resetting the switch in order
* to upload the new static config is unavoidable. Back up the settings we
@@ -1272,27 +1251,18 @@ static int sja1105_static_config_reload(struct sja1105_private *priv)
{
struct sja1105_mac_config_entry *mac;
int speed_mbps[SJA1105_NUM_PORTS];
- u8 stp_state[SJA1105_NUM_PORTS];
int rc, i;
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
- /* Back up settings changed by sja1105_adjust_port_config and
- * sja1105_bridge_stp_state_set and restore their defaults.
+ /* Back up the dynamic link speed changed by sja1105_adjust_port_config
+ * in order to temporarily restore it to SJA1105_SPEED_AUTO - which the
+ * switch wants to see in the static config in order to allow us to
+ * change it through the dynamic interface later.
*/
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
speed_mbps[i] = sja1105_speed[mac[i].speed];
mac[i].speed = SJA1105_SPEED_AUTO;
- if (i == dsa_upstream_port(priv->ds, i)) {
- mac[i].ingress = true;
- mac[i].egress = true;
- mac[i].dyn_learn = true;
- } else {
- stp_state[i] = sja1105_stp_state_get(priv, i);
- mac[i].ingress = false;
- mac[i].egress = false;
- mac[i].dyn_learn = false;
- }
}
/* Reset switch and send updated static configuration */
@@ -1309,13 +1279,7 @@ static int sja1105_static_config_reload(struct sja1105_private *priv)
goto out;
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
- bool enabled = (speed_mbps[i] != SPEED_UNKNOWN);
-
- if (i != dsa_upstream_port(priv->ds, i))
- sja1105_bridge_stp_state_set(priv->ds, i, stp_state[i]);
-
- rc = sja1105_adjust_port_config(priv, i, speed_mbps[i],
- enabled);
+ rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]);
if (rc < 0)
goto out;
}
@@ -1921,6 +1885,8 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.set_ageing_time = sja1105_set_ageing_time,
.phylink_validate = sja1105_phylink_validate,
.phylink_mac_config = sja1105_mac_config,
+ .phylink_mac_link_up = sja1105_mac_link_up,
+ .phylink_mac_link_down = sja1105_mac_link_down,
.get_strings = sja1105_get_strings,
.get_ethtool_stats = sja1105_get_ethtool_stats,
.get_sset_count = sja1105_get_sset_count,