diff options
| author |   Rafał Miłecki <rafal@milecki.pl> | 2017-10-12 10:21:26 +0200 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2017-10-12 22:59:38 -0700 |
| commit | 12acd136913ccdf394eeb2bc8686ff5505368119 (patch) | |
| tree | d104e37e5f425f6eeec2fbd8518d2a6d537fe1a0 /drivers/net/ethernet/broadcom/bgmac-bcma.c | |
| parent | net: phy: broadcom: support new device flag for setting master mode (diff) | |
| download | linux-dev-12acd136913ccdf394eeb2bc8686ff5505368119.tar.xz linux-dev-12acd136913ccdf394eeb2bc8686ff5505368119.zip | |
net: bgmac: enable master mode for BCM54210E and B50212E PHYs
There are 4 very similar PHYs:
0x600d84a1: BCM54210E (rev B0)
0x600d84a2: BCM54210E (rev B1)
0x600d84a5: B50212E (rev B0)
0x600d84a6: B50212E (rev B1)
that need setting master mode manually. It's because they run in slave
mode by default with Automatic Slave/Master configuration disabled which
can lead to unreliable connection with massive ping loss.
So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY
connected to the bgmac supported ethernet device. Telling PHY driver to
setup PHY properly solves this issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bgmac-bcma.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bgmac-bcma.c | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c index 6322594ab260..6fe074c1588b 100644 --- a/drivers/net/ethernet/broadcom/bgmac-bcma.c +++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c @@ -184,13 +184,19 @@ static int bgmac_probe(struct bcma_device *core) if (!bgmac_is_bcm4707_family(core) && !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) { + struct phy_device *phydev; + mii_bus = bcma_mdio_mii_register(bgmac); if (IS_ERR(mii_bus)) { err = PTR_ERR(mii_bus); goto err; } - bgmac->mii_bus = mii_bus; + + phydev = mdiobus_get_phy(bgmac->mii_bus, bgmac->phyaddr); + if (ci->id == BCMA_CHIP_ID_BCM53573 && phydev && + (phydev->drv->phy_id & phydev->drv->phy_id_mask) == PHY_ID_BCM54210E) + phydev->dev_flags |= PHY_BRCM_EN_MASTER_MODE; } if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { |