path: root/drivers/net/ethernet/davicom/dm9000.c
diff options
authorSylwester Nawrocki <s.nawrocki@samsung.com>2016-08-09 18:00:08 +0200
committerDavid S. Miller <davem@davemloft.net>2016-08-09 15:08:22 -0700
commita96d3b7593a3eefab62dd930e5c99201c3678ee4 (patch)
tree10a8f2e5d96778b5b899f49ed82beeda8813d699 /drivers/net/ethernet/davicom/dm9000.c
parentbonding: fix the typo (diff)
dm9000: Fix irq trigger type setup on non-dt platforms
Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/davicom/dm9000.c')
1 files changed, 5 insertions, 3 deletions
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 1471e16ba719..f45385f5c6e5 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1299,6 +1299,7 @@ static int
dm9000_open(struct net_device *dev)
struct board_info *db = netdev_priv(dev);
+ unsigned int irq_flags = irq_get_trigger_type(dev->irq);
if (netif_msg_ifup(db))
dev_dbg(db->dev, "enabling %s\n", dev->name);
@@ -1306,9 +1307,11 @@ dm9000_open(struct net_device *dev)
/* If there is no IRQ type specified, tell the user that this is a
* problem
- if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE)
+ if (irq_flags == IRQF_TRIGGER_NONE)
dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+ irq_flags |= IRQF_SHARED;
/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
mdelay(1); /* delay needs by DM9000B */
@@ -1316,8 +1319,7 @@ dm9000_open(struct net_device *dev)
/* Initialize DM9000 board */
- if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED,
- dev->name, dev))
+ if (request_irq(dev->irq, dm9000_interrupt, irq_flags, dev->name, dev))
return -EAGAIN;
/* Now that we have an interrupt handler hooked up we can unmask
* our interrupts