diff options
| author |   Andrew Jeffery <andrew@aj.id.au> | 2019-10-10 12:37:56 +1030 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2019-10-11 20:37:38 -0700 |
| commit | 9bce4b27f3ecd4b81648cb02ce8fd6d319676eb7 (patch) | |
| tree | cae13c4526c5b4c585b0b5bcdc6f3f3130507f74 /drivers/net/ethernet/faraday/ftgmac100.c | |
| parent | dt-bindings: net: ftgmac100: Describe clock properties (diff) | |
| download | linux-dev-9bce4b27f3ecd4b81648cb02ce8fd6d319676eb7.tar.xz linux-dev-9bce4b27f3ecd4b81648cb02ce8fd6d319676eb7.zip | |
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
The 50MHz RCLK has to be enabled before the RMII interface will function.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/faraday/ftgmac100.c')
| -rw-r--r-- | drivers/net/ethernet/faraday/ftgmac100.c | 50 |
1 files changed, 40 insertions, 10 deletions
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 9b7af94a40bb..824310253099 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -90,6 +90,9 @@ struct ftgmac100 { struct mii_bus *mii_bus; struct clk *clk; + /* AST2500/AST2600 RMII ref clock gate */ + struct clk *rclk; + /* Link management */ int cur_speed; int cur_duplex; @@ -1718,20 +1721,41 @@ static void ftgmac100_ncsi_handler(struct ncsi_dev *nd) nd->link_up ? "up" : "down"); } -static void ftgmac100_setup_clk(struct ftgmac100 *priv) +static int ftgmac100_setup_clk(struct ftgmac100 *priv) { - priv->clk = devm_clk_get(priv->dev, NULL); - if (IS_ERR(priv->clk)) - return; + struct clk *clk; + int rc; - clk_prepare_enable(priv->clk); + clk = devm_clk_get(priv->dev, NULL /* MACCLK */); + if (IS_ERR(clk)) + return PTR_ERR(clk); + priv->clk = clk; + rc = clk_prepare_enable(priv->clk); + if (rc) + return rc; /* Aspeed specifies a 100MHz clock is required for up to * 1000Mbit link speeds. As NCSI is limited to 100Mbit, 25MHz * is sufficient */ - clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ : - FTGMAC_100MHZ); + rc = clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ : + FTGMAC_100MHZ); + if (rc) + goto cleanup_clk; + + /* RCLK is for RMII, typically used for NCSI. Optional because its not + * necessary if it's the AST2400 MAC, or the MAC is configured for + * RGMII, or the controller is not an ASPEED-based controller. + */ + priv->rclk = devm_clk_get_optional(priv->dev, "RCLK"); + rc = clk_prepare_enable(priv->rclk); + if (!rc) + return 0; + +cleanup_clk: + clk_disable_unprepare(priv->clk); + + return rc; } static int ftgmac100_probe(struct platform_device *pdev) @@ -1853,8 +1877,11 @@ static int ftgmac100_probe(struct platform_device *pdev) goto err_setup_mdio; } - if (priv->is_aspeed) - ftgmac100_setup_clk(priv); + if (priv->is_aspeed) { + err = ftgmac100_setup_clk(priv); + if (err) + goto err_ncsi_dev; + } /* Default ring sizes */ priv->rx_q_entries = priv->new_rx_q_entries = DEF_RX_QUEUE_ENTRIES; @@ -1886,8 +1913,10 @@ static int ftgmac100_probe(struct platform_device *pdev) return 0; -err_ncsi_dev: err_register_netdev: + clk_disable_unprepare(priv->rclk); + clk_disable_unprepare(priv->clk); +err_ncsi_dev: ftgmac100_destroy_mdio(netdev); err_setup_mdio: iounmap(priv->base); @@ -1909,6 +1938,7 @@ static int ftgmac100_remove(struct platform_device *pdev) unregister_netdev(netdev); + clk_disable_unprepare(priv->rclk); clk_disable_unprepare(priv->clk); /* There's a small chance the reset task will have been re-queued, |