gianfar: Remove sysfs stubs for FIFOCFG and stashing

Removing the sysfs stubs for the Tx FIFOCFG and ATTRELI
(stashing) config registers, as these registers may only
be configured after a MAC reset, with the controller stopped
(i.e. during hw init, at probe() time).  The current sysfs
stubs allow on-the-fly updates of these registers (the locking
measures are useless and only add unecessary code).

Changing these registers is discouraged. Only the default values
will be used instead.

Moreover, the stashing (ATTRELI) configuration options were
effectively disabled (didn't get to the hw anyway if changed)
because the stashing device_flags (HAS_BD_STASHING|HAS_BUF_STASHING)
were "accidentally" cleared during probe().

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 27 insertions, 30 deletions

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index ab915b060d4c..9b12201d396d 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -338,7 +338,6 @@ static void gfar_init_mac(struct net_device *ndev)
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 rctrl = 0;
 	u32 tctrl = 0;
-	u32 attrs = 0;
 
 	/* write the tx/rx base registers */
 	gfar_init_tx_rx_base(priv);
@@ -409,29 +408,6 @@ static void gfar_init_mac(struct net_device *ndev)
 	}
 
 	gfar_write(&regs->tctrl, tctrl);
-
-	/* Set the extraction length and index */
-	attrs = ATTRELI_EL(priv->rx_stash_size) |
-		ATTRELI_EI(priv->rx_stash_index);
-
-	gfar_write(&regs->attreli, attrs);
-
-	/* Start with defaults, and add stashing or locking
-	 * depending on the approprate variables
-	 */
-	attrs = ATTR_INIT_SETTINGS;
-
-	if (priv->bd_stash_en)
-		attrs |= ATTR_BDSTASH;
-
-	if (priv->rx_stash_size != 0)
-		attrs |= ATTR_BUFSTASH;
-
-	gfar_write(&regs->attr, attrs);
-
-	gfar_write(&regs->fifo_tx_thr, priv->fifo_threshold);
-	gfar_write(&regs->fifo_tx_starve, priv->fifo_starve);
-	gfar_write(&regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
 }
 
 static struct net_device_stats *gfar_get_stats(struct net_device *dev)
@@ -784,13 +760,13 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 		memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
 
 	if (model && !strcasecmp(model, "TSEC"))
-		priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+		priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
 				     FSL_GIANFAR_DEV_HAS_COALESCE |
 				     FSL_GIANFAR_DEV_HAS_RMON |
 				     FSL_GIANFAR_DEV_HAS_MULTI_INTR;
 
 	if (model && !strcasecmp(model, "eTSEC"))
-		priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+		priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
 				     FSL_GIANFAR_DEV_HAS_COALESCE |
 				     FSL_GIANFAR_DEV_HAS_RMON |
 				     FSL_GIANFAR_DEV_HAS_MULTI_INTR |
@@ -1030,7 +1006,7 @@ static void gfar_detect_errata(struct gfar_private *priv)
 static void gfar_hw_init(struct gfar_private *priv)
 {
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	u32 tempval;
+	u32 tempval, attrs;
 
 	/* Reset MAC layer */
 	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
@@ -1052,6 +1028,30 @@ static void gfar_hw_init(struct gfar_private *priv)
 	/* Initialize ECNTRL */
 	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
+	/* Set the extraction length and index */
+	attrs = ATTRELI_EL(priv->rx_stash_size) |
+		ATTRELI_EI(priv->rx_stash_index);
+
+	gfar_write(&regs->attreli, attrs);
+
+	/* Start with defaults, and add stashing
+	 * depending on driver parameters
+	 */
+	attrs = ATTR_INIT_SETTINGS;
+
+	if (priv->bd_stash_en)
+		attrs |= ATTR_BDSTASH;
+
+	if (priv->rx_stash_size != 0)
+		attrs |= ATTR_BUFSTASH;
+
+	gfar_write(&regs->attr, attrs);
+
+	/* FIFO configs */
+	gfar_write(&regs->fifo_tx_thr, DEFAULT_FIFO_TX_THR);
+	gfar_write(&regs->fifo_tx_starve, DEFAULT_FIFO_TX_STARVE);
+	gfar_write(&regs->fifo_tx_starve_shutoff, DEFAULT_FIFO_TX_STARVE_OFF);
+
 	/* Program the interrupt steering regs, only for MG devices */
 	if (priv->num_grps > 1)
 		gfar_write_isrg(priv);
@@ -1232,9 +1232,6 @@ static int gfar_probe(struct platform_device *ofdev)
 	/* Initialize the filer table */
 	gfar_init_filer_table(priv);
 
-	/* Create all the sysfs files */
-	gfar_init_sysfs(dev);
-
 	/* Print out the device info */
 	netdev_info(dev, "mac: %pM\n", dev->dev_addr);