drivers/net: delete Racal Interlan ISA ni52 (i825xx) driver

Like the other drivers that were in the ISA i825xx family, the ni52
was rather rare, not widely used, and hence perhaps not as reliable
as the more mainstream ISA drivers that were heavily used.  Given
that, it is chosen for retirement at this time as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

1 files changed, 0 insertions, 310 deletions

diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h
deleted file mode 100644
index 0a03b2883327..000000000000
--- a/drivers/net/ethernet/i825xx/ni52.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel i82586 Ethernet definitions
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same GNU General Public License that covers that work.
- *
- * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
- *
- * I have done a look in the following sources:
- *   crynwr-packet-driver by Russ Nelson
- *   Garret A. Wollman's i82586-driver for BSD
- */
-
-
-#define NI52_RESET     0  /* writing to this address, resets the i82586 */
-#define NI52_ATTENTION 1  /* channel attention, kick the 586 */
-#define NI52_TENA      3  /* 2-5 possibly wrong, Xmit enable */
-#define NI52_TDIS      2  /* Xmit disable */
-#define NI52_INTENA    5  /* Interrupt enable */
-#define NI52_INTDIS    4  /* Interrupt disable */
-#define NI52_MAGIC1    6  /* dunno exact function */
-#define NI52_MAGIC2    7  /* dunno exact function */
-
-#define NI52_MAGICVAL1 0x00  /* magic-values for ni5210 card */
-#define NI52_MAGICVAL2 0x55
-
-/*
- * where to find the System Configuration Pointer (SCP)
- */
-#define SCP_DEFAULT_ADDRESS 0xfffff4
-
-
-/*
- * System Configuration Pointer Struct
- */
-
-struct scp_struct
-{
-	u16 zero_dum0;	/* has to be zero */
-	u8 sysbus;	/* 0=16Bit,1=8Bit */
-	u8 zero_dum1;	/* has to be zero for 586 */
-	u16 zero_dum2;
-	u16 zero_dum3;
-	u32 iscp;		/* pointer to the iscp-block */
-};
-
-
-/*
- * Intermediate System Configuration Pointer (ISCP)
- */
-struct iscp_struct
-{
-	u8 busy;          /* 586 clears after successful init */
-	u8 zero_dummy;    /* has to be zero */
-	u16 scb_offset;    /* pointeroffset to the scb_base */
-	u32 scb_base;      /* base-address of all 16-bit offsets */
-};
-
-/*
- * System Control Block (SCB)
- */
-struct scb_struct
-{
-	u8 rus;
-	u8 cus;
-	u8 cmd_ruc;        /* command word: RU part */
-	u8 cmd_cuc;        /* command word: CU part & ACK */
-	u16 cbl_offset;    /* pointeroffset, command block list */
-	u16 rfa_offset;    /* pointeroffset, receive frame area */
-	u16 crc_errs;      /* CRC-Error counter */
-	u16 aln_errs;      /* alignmenterror counter */
-	u16 rsc_errs;      /* Resourceerror counter */
-	u16 ovrn_errs;     /* OVerrunerror counter */
-};
-
-/*
- * possible command values for the command word
- */
-#define RUC_MASK	0x0070	/* mask for RU commands */
-#define RUC_NOP		0x0000	/* NOP-command */
-#define RUC_START	0x0010	/* start RU */
-#define RUC_RESUME	0x0020	/* resume RU after suspend */
-#define RUC_SUSPEND	0x0030	/* suspend RU */
-#define RUC_ABORT	0x0040	/* abort receiver operation immediately */
-
-#define CUC_MASK        0x07  /* mask for CU command */
-#define CUC_NOP         0x00  /* NOP-command */
-#define CUC_START       0x01  /* start execution of 1. cmd on the CBL */
-#define CUC_RESUME      0x02  /* resume after suspend */
-#define CUC_SUSPEND     0x03  /* Suspend CU */
-#define CUC_ABORT       0x04  /* abort command operation immediately */
-
-#define ACK_MASK        0xf0  /* mask for ACK command */
-#define ACK_CX          0x80  /* acknowledges STAT_CX */
-#define ACK_FR          0x40  /* ack. STAT_FR */
-#define ACK_CNA         0x20  /* ack. STAT_CNA */
-#define ACK_RNR         0x10  /* ack. STAT_RNR */
-
-/*
- * possible status values for the status word
- */
-#define STAT_MASK       0xf0  /* mask for cause of interrupt */
-#define STAT_CX         0x80  /* CU finished cmd with its I bit set */
-#define STAT_FR         0x40  /* RU finished receiving a frame */
-#define STAT_CNA        0x20  /* CU left active state */
-#define STAT_RNR        0x10  /* RU left ready state */
-
-#define CU_STATUS       0x7   /* CU status, 0=idle */
-#define CU_SUSPEND      0x1   /* CU is suspended */
-#define CU_ACTIVE       0x2   /* CU is active */
-
-#define RU_STATUS	0x70	/* RU status, 0=idle */
-#define RU_SUSPEND	0x10	/* RU suspended */
-#define RU_NOSPACE	0x20	/* RU no resources */
-#define RU_READY	0x40	/* RU is ready */
-
-/*
- * Receive Frame Descriptor (RFD)
- */
-struct rfd_struct
-{
-	u8  stat_low;	/* status word */
-	u8  stat_high;	/* status word */
-	u8  rfd_sf;	/* 82596 mode only */
-	u8  last;		/* Bit15,Last Frame on List / Bit14,suspend */
-	u16 next;		/* linkoffset to next RFD */
-	u16 rbd_offset;	/* pointeroffset to RBD-buffer */
-	u8  dest[6];	/* ethernet-address, destination */
-	u8  source[6];	/* ethernet-address, source */
-	u16 length;	/* 802.3 frame-length */
-	u16 zero_dummy;	/* dummy */
-};
-
-#define RFD_LAST     0x80	/* last: last rfd in the list */
-#define RFD_SUSP     0x40	/* last: suspend RU after  */
-#define RFD_COMPL    0x80
-#define RFD_OK       0x20
-#define RFD_BUSY     0x40
-#define RFD_ERR_LEN  0x10     /* Length error (if enabled length-checking */
-#define RFD_ERR_CRC  0x08     /* CRC error */
-#define RFD_ERR_ALGN 0x04     /* Alignment error */
-#define RFD_ERR_RNR  0x02     /* status: receiver out of resources */
-#define RFD_ERR_OVR  0x01     /* DMA Overrun! */
-
-#define RFD_ERR_FTS  0x0080	/* Frame to short */
-#define RFD_ERR_NEOP 0x0040	/* No EOP flag (for bitstuffing only) */
-#define RFD_ERR_TRUN 0x0020	/* (82596 only/SF mode) indicates truncated frame */
-#define RFD_MATCHADD 0x0002     /* status: Destinationaddress !matches IA (only 82596) */
-#define RFD_COLLDET  0x0001	/* Detected collision during reception */
-
-/*
- * Receive Buffer Descriptor (RBD)
- */
-struct rbd_struct
-{
-	u16 status;	/* status word,number of used bytes in buff */
-	u16 next;		/* pointeroffset to next RBD */
-	u32 buffer;	/* receive buffer address pointer */
-	u16 size;		/* size of this buffer */
-	u16 zero_dummy;    /* dummy */
-};
-
-#define RBD_LAST	0x8000	/* last buffer */
-#define RBD_USED	0x4000	/* this buffer has data */
-#define RBD_MASK	0x3fff	/* size-mask for length */
-
-/*
- * Statusvalues for Commands/RFD
- */
-#define STAT_COMPL   0x8000	/* status: frame/command is complete */
-#define STAT_BUSY    0x4000	/* status: frame/command is busy */
-#define STAT_OK      0x2000	/* status: frame/command is ok */
-
-/*
- * Action-Commands
- */
-#define CMD_NOP		0x0000	/* NOP */
-#define CMD_IASETUP	0x0001	/* initial address setup command */
-#define CMD_CONFIGURE	0x0002	/* configure command */
-#define CMD_MCSETUP	0x0003	/* MC setup command */
-#define CMD_XMIT	0x0004	/* transmit command */
-#define CMD_TDR		0x0005	/* time domain reflectometer (TDR) command */
-#define CMD_DUMP	0x0006	/* dump command */
-#define CMD_DIAGNOSE	0x0007	/* diagnose command */
-
-/*
- * Action command bits
- */
-#define CMD_LAST	0x8000	/* indicates last command in the CBL */
-#define CMD_SUSPEND	0x4000	/* suspend CU after this CB */
-#define CMD_INT		0x2000	/* generate interrupt after execution */
-
-/*
- * NOP - command
- */
-struct nop_cmd_struct
-{
-	u16 cmd_status;	/* status of this command */
-	u16 cmd_cmd;       /* the command itself (+bits) */
-	u16 cmd_link;      /* offsetpointer to next command */
-};
-
-/*
- * IA Setup command
- */
-struct iasetup_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u8  iaddr[6];
-};
-
-/*
- * Configure command
- */
-struct configure_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u8  byte_cnt;   /* size of the config-cmd */
-	u8  fifo;       /* fifo/recv monitor */
-	u8  sav_bf;     /* save bad frames (bit7=1)*/
-	u8  adr_len;    /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
-	u8  priority;   /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
-	u8  ifs;        /* inter frame spacing */
-	u8  time_low;   /* slot time low */
-	u8  time_high;  /* slot time high(0-2) and max. retries(4-7) */
-	u8  promisc;    /* promisc-mode(0) , et al (1-7) */
-	u8  carr_coll;  /* carrier(0-3)/collision(4-7) stuff */
-	u8  fram_len;   /* minimal frame len */
-	u8  dummy;	     /* dummy */
-};
-
-/*
- * Multicast Setup command
- */
-struct mcsetup_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 mc_cnt;		/* number of bytes in the MC-List */
-	u8  mc_list[0][6];  	/* pointer to 6 bytes entries */
-};
-
-/*
- * DUMP command
- */
-struct dump_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 dump_offset;    /* pointeroffset to DUMP space */
-};
-
-/*
- * transmit command
- */
-struct transmit_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 tbd_offset;	/* pointeroffset to TBD */
-	u8  dest[6];       /* destination address of the frame */
-	u16 length;	/* user defined: 802.3 length / Ether type */
-};
-
-#define TCMD_ERRMASK     0x0fa0
-#define TCMD_MAXCOLLMASK 0x000f
-#define TCMD_MAXCOLL     0x0020
-#define TCMD_HEARTBEAT   0x0040
-#define TCMD_DEFERRED    0x0080
-#define TCMD_UNDERRUN    0x0100
-#define TCMD_LOSTCTS     0x0200
-#define TCMD_NOCARRIER   0x0400
-#define TCMD_LATECOLL    0x0800
-
-struct tdr_cmd_struct
-{
-	u16 cmd_status;
-	u16 cmd_cmd;
-	u16 cmd_link;
-	u16 status;
-};
-
-#define TDR_LNK_OK	0x8000	/* No link problem identified */
-#define TDR_XCVR_PRB	0x4000	/* indicates a transceiver problem */
-#define TDR_ET_OPN	0x2000	/* open, no correct termination */
-#define TDR_ET_SRT	0x1000	/* TDR detected a short circuit */
-#define TDR_TIMEMASK	0x07ff	/* mask for the time field */
-
-/*
- * Transmit Buffer Descriptor (TBD)
- */
-struct tbd_struct
-{
-	u16 size;		/* size + EOF-Flag(15) */
-	u16 next;          /* pointeroffset to next TBD */
-	u32 buffer;        /* pointer to buffer */
-};
-
-#define TBD_LAST 0x8000         /* EOF-Flag, indicates last buffer in list */
-
-
-
-