diff options
| author |   Jacob Keller <jacob.e.keller@intel.com> | 2017-09-07 08:05:48 -0400 |
|---|---|---|
| committer |   Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2017-10-09 14:19:46 -0700 |
| commit | 427025592955d245997b12923111e85f07850d5f (patch) | |
| tree | 7274306438ef4357d250372d89d0fee84fb43d6a /drivers/net/ethernet/intel/i40e/i40e_txrx.h | |
| parent | i40evf: fix mac filter removal timing issue (diff) | |
| download | linux-dev-427025592955d245997b12923111e85f07850d5f.tar.xz linux-dev-427025592955d245997b12923111e85f07850d5f.zip | |
i40e/i40evf: fix incorrect default ITR values on driver load
The ITR register expects to be programmed in units of 2 microseconds.
Because of this, all of the drivers I40E_ITR_* constants are in terms of
this 2 microsecond register.
Unfortunately, the rx_itr_default value is expected to be programmed in
microseconds.
Effectively the driver defaults to an ITR value of half the expected
value (in terms of minimum microseconds between interrupts).
Fix this by changing the default values to be calculated using
ITR_REG_TO_USEC macro which indicates that we're converting from the
register units into microseconds.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_txrx.h')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_txrx.h | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index a4e3e665a1a1..c3156aa3f709 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -38,8 +38,10 @@ #define I40E_ITR_8K 0x003E #define I40E_ITR_4K 0x007A #define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */ -#define I40E_ITR_RX_DEF I40E_ITR_20K -#define I40E_ITR_TX_DEF I40E_ITR_20K +#define I40E_ITR_RX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ + I40E_ITR_DYNAMIC) +#define I40E_ITR_TX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ + I40E_ITR_DYNAMIC) #define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ #define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */ #define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */ |