path: root/drivers/net/ethernet/intel/i40e
diff options
authorMartyna Szapar <martyna.szapar@intel.com>2018-08-07 17:11:23 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2018-08-24 08:52:35 -0700
commitfa38e30ac73fbb01d7e5d0fd1b12d412fa3ac3ee (patch)
treebba9bb360e6319b6d1ad25449460b6544c4f243a /drivers/net/ethernet/intel/i40e
parentixgbe: fix driver behaviour after issuing VFLR (diff)
i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled
If interface is connected to switch port configured for DCB there are TX timeouts when bringing up interface. Problem started appearing after adding in i40e driver code mqprio hardware offload mode. In function i40e_vsi_configure_bw_alloc was added resetting BW rate which should be executing when mqprio qdisc is removed but was also when there was no mqprio qdisc added and DCB was enabled. In this patch was added additional check for DCB flag so now when DCB is enabled the correct DCB configs from before mqprio patch are restored. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/i40e')
1 files changed, 8 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f2c622e78802..ac685ad4d877 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5122,15 +5122,17 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
u8 *bw_share)
struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
+ struct i40e_pf *pf = vsi->back;
i40e_status ret;
int i;
- if (vsi->back->flags & I40E_FLAG_TC_MQPRIO)
+ /* There is no need to reset BW when mqprio mode is on. */
+ if (pf->flags & I40E_FLAG_TC_MQPRIO)
return 0;
- if (!vsi->mqprio_qopt.qopt.hw) {
+ if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
if (ret)
- dev_info(&vsi->back->pdev->dev,
+ dev_info(&pf->pdev->dev,
"Failed to reset tx rate for vsi->seid %u\n",
return ret;
@@ -5139,12 +5141,11 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
bw_data.tc_bw_credits[i] = bw_share[i];
- ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
- NULL);
+ ret = i40e_aq_config_vsi_tc_bw(&pf->hw, vsi->seid, &bw_data, NULL);
if (ret) {
- dev_info(&vsi->back->pdev->dev,
+ dev_info(&pf->pdev->dev,
"AQ command Config VSI BW allocation per TC failed = %d\n",
- vsi->back->hw.aq.asq_last_status);
+ pf->hw.aq.asq_last_status);
return -EINVAL;