aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igb/e1000_phy.c
diff options
context:
space:
mode:
authorCarolyn Wyborny <carolyn.wyborny@intel.com>2012-04-06 23:25:19 +0000
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2012-05-12 13:17:13 -0700
commitf96a8a0b78548c0ec06b0b4b438db6ee895d67e9 (patch)
treeb1e6cc64dd55fc46cfb8877aa94db6a7940c1327 /drivers/net/ethernet/intel/igb/e1000_phy.c
parentigb: Add function and pointers for 82580 low power state settings. (diff)
downloadlinux-dev-f96a8a0b78548c0ec06b0b4b438db6ee895d67e9.tar.xz
linux-dev-f96a8a0b78548c0ec06b0b4b438db6ee895d67e9.zip
igb: Add Support for new i210/i211 devices.
This patch adds new initialization functions and device support for i210 and i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_phy.c')
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_phy.c147
1 files changed, 140 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 789de5b83aad..7be98b6f1052 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -35,6 +35,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
u16 *phy_ctrl);
static s32 igb_wait_autoneg(struct e1000_hw *hw);
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
@@ -570,6 +571,11 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
hw_dbg("Error committing the PHY changes\n");
goto out;
}
+ if (phy->type == e1000_phy_i210) {
+ ret_val = igb_set_master_slave_mode(hw);
+ if (ret_val)
+ return ret_val;
+ }
out:
return ret_val;
@@ -1213,12 +1219,22 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
goto out;
if (!link) {
- if (hw->phy.type != e1000_phy_m88 ||
- hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID) {
+ bool reset_dsp = true;
+
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
+ reset_dsp = false;
+ break;
+ default:
+ if (hw->phy.type != e1000_phy_m88)
+ reset_dsp = false;
+ break;
+ }
+ if (!reset_dsp)
hw_dbg("Link taking longer than expected.\n");
- } else {
-
+ else {
/*
* We didn't get link.
* Reset the DSP and cross our fingers.
@@ -1243,7 +1259,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (hw->phy.type != e1000_phy_m88 ||
hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
+ hw->phy.id == M88E1112_E_PHY_ID ||
+ hw->phy.id == I210_I_PHY_ID)
goto out;
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
@@ -1441,6 +1458,7 @@ s32 igb_check_downshift(struct e1000_hw *hw)
u16 phy_data, offset, mask;
switch (phy->type) {
+ case e1000_phy_i210:
case e1000_phy_m88:
case e1000_phy_gg82563:
offset = M88E1000_PHY_SPEC_STATUS;
@@ -1476,7 +1494,7 @@ out:
*
* Polarity is determined based on the PHY specific status register.
**/
-static s32 igb_check_polarity_m88(struct e1000_hw *hw)
+s32 igb_check_polarity_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1665,6 +1683,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
u16 phy_data, phy_data2, index, default_page, is_cm;
switch (hw->phy.id) {
+ case I210_I_PHY_ID:
case I347AT4_E_PHY_ID:
/* Remember the original page select and set it to 7 */
ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
@@ -2129,10 +2148,16 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
void igb_power_up_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
+ if (hw->phy.type == e1000_phy_i210) {
+ hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+ power_reg &= ~GS40G_CS_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+ }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
}
@@ -2146,10 +2171,18 @@ void igb_power_up_phy_copper(struct e1000_hw *hw)
void igb_power_down_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
+ u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
+
+ /* i210 Phy requires an additional bit for power up/down */
+ if (hw->phy.type == e1000_phy_i210) {
+ hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
+ power_reg |= GS40G_CS_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
+ }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
msleep(1);
}
@@ -2345,3 +2378,103 @@ s32 igb_get_cable_length_82580(struct e1000_hw *hw)
out:
return ret_val;
}
+
+/**
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+ *
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Master/slave mode
+ **/
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Resolve Master/Slave mode */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (hw->phy.ms_type) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ /* fall-through */
+ default:
+ break;
+ }
+
+ return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}