igb: Fix for devices using ethtool for EEE settings

This patch fixes a problem where using ethtool for EEE setting was not
working correctly.  This patch also fixes a problem where
the function that checks for EEE status on i354 devices was not being
called and was causing warnings with static analysis tools.

Reported-by: Rashika Kheria <rashika.kheria@gmail.com>
Reported-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 55 insertions, 14 deletions

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index a96beb67e9ee..340a3449e1e9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1726,6 +1726,10 @@ int igb_up(struct igb_adapter *adapter)
 	hw->mac.get_link_status = 1;
 	schedule_work(&adapter->watchdog_task);
 
+	if ((adapter->flags & IGB_FLAG_EEE) &&
+	    (!hw->dev_spec._82575.eee_disable))
+		adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
 	return 0;
 }
 
@@ -1974,6 +1978,21 @@ void igb_reset(struct igb_adapter *adapter)
 		}
 	}
 #endif
+	/*Re-establish EEE setting */
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		switch (mac->type) {
+		case e1000_i350:
+		case e1000_i210:
+		case e1000_i211:
+			igb_set_eee_i350(hw);
+			break;
+		case e1000_i354:
+			igb_set_eee_i354(hw);
+			break;
+		default:
+			break;
+		}
+	}
 	if (!netif_running(adapter->netdev))
 		igb_power_down_link(adapter);
 
@@ -2560,23 +2579,36 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
 		(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
 		adapter->num_rx_queues, adapter->num_tx_queues);
-	switch (hw->mac.type) {
-	case e1000_i350:
-	case e1000_i210:
-	case e1000_i211:
-		igb_set_eee_i350(hw);
-		break;
-	case e1000_i354:
-		if (hw->phy.media_type == e1000_media_type_copper) {
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		switch (hw->mac.type) {
+		case e1000_i350:
+		case e1000_i210:
+		case e1000_i211:
+			/* Enable EEE for internal copper PHY devices */
+			err = igb_set_eee_i350(hw);
+			if ((!err) &&
+			    (!hw->dev_spec._82575.eee_disable)) {
+				adapter->eee_advert =
+					MDIO_EEE_100TX | MDIO_EEE_1000T;
+				adapter->flags |= IGB_FLAG_EEE;
+			}
+			break;
+		case e1000_i354:
 			if ((rd32(E1000_CTRL_EXT) &
-			    E1000_CTRL_EXT_LINK_MODE_SGMII))
-				igb_set_eee_i354(hw);
+			    E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+				err = igb_set_eee_i354(hw);
+				if ((!err) &&
+					(!hw->dev_spec._82575.eee_disable)) {
+					adapter->eee_advert =
+					   MDIO_EEE_100TX | MDIO_EEE_1000T;
+					adapter->flags |= IGB_FLAG_EEE;
+				}
+			}
+			break;
+		default:
+			break;
 		}
-		break;
-	default:
-		break;
 	}
-
 	pm_runtime_put_noidle(&pdev->dev);
 	return 0;
 
@@ -4158,6 +4190,15 @@ static void igb_watchdog_task(struct work_struct *work)
 			       (ctrl & E1000_CTRL_RFCE) ?  "RX" :
 			       (ctrl & E1000_CTRL_TFCE) ?  "TX" : "None");
 
+			/* disable EEE if enabled */
+			if ((adapter->flags & IGB_FLAG_EEE) &&
+				(adapter->link_duplex == HALF_DUPLEX)) {
+				dev_info(&adapter->pdev->dev,
+				"EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
+				adapter->hw.dev_spec._82575.eee_disable = true;
+				adapter->flags &= ~IGB_FLAG_EEE;
+			}
+
 			/* check if SmartSpeed worked */
 			igb_check_downshift(hw);
 			if (phy->speed_downgraded)