ixgbe: Add X550 support function pointers

This patch extends the function pointer structure to include the new
X550 class MAC types. This creates a new file ixgbe_x550.c that contains
all of the new methods.  Because of similarities to the X540 part in
some cases we just use it's methods where they can be used without any
modification.  These exported functions are now defined in the new
ixgbe_x540.h file.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 1432 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
new file mode 100644
index 000000000000..ffdd1231f419
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -0,0 +1,1432 @@
+/*******************************************************************************
+ *
+ *  Intel 10 Gigabit PCI Express Linux driver
+ *  Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  The full GNU General Public License is included in this distribution in
+ *  the file called "COPYING".
+ *
+ *  Contact Information:
+ *  Linux NICS <linux.nics@intel.com>
+ *  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ *  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+/** ixgbe_identify_phy_x550em - Get PHY type based on device id
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns error code
+ */
+static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+	u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		/* set up for CS4227 usage */
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+		if (hw->bus.lan_id) {
+			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+			esdp |= IXGBE_ESDP_SDP1_DIR;
+		}
+		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+
+		return ixgbe_identify_module_generic(hw);
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+		hw->phy.type = ixgbe_phy_x550em_kx4;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_KR:
+		hw->phy.type = ixgbe_phy_x550em_kr;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+		return ixgbe_identify_phy_generic(hw);
+	default:
+		break;
+	}
+	return 0;
+}
+
+static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				     u32 device_type, u16 *phy_data)
+{
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				      u32 device_type, u16 phy_data)
+{
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+				    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+		       eeprom->type, eeprom->word_size);
+	}
+
+	return 0;
+}
+
+/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
+ *  IOSF device
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @phy_data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u32 *data)
+{
+	u32 i, command, error;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The SB IOSF BUSY bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usleep_range(10, 20);
+
+		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		hw_dbg(hw, "Failed to read, error %x\n", error);
+		return IXGBE_ERR_PHY;
+	}
+
+	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+		hw_dbg(hw, "Read timed out\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	*data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+	return 0;
+}
+
+/** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface
+ *  command assuming that the semaphore is already obtained.
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status;
+	struct ixgbe_hic_read_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = cpu_to_be32(offset * 2);
+	/* one word */
+	buffer.length = cpu_to_be16(sizeof(u16));
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	if (status)
+		return status;
+
+	*data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+					  FW_NVM_DATA_OFFSET);
+
+	return 0;
+}
+
+/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				     u16 offset, u16 words, u16 *data)
+{
+	struct ixgbe_hic_read_shadow_ram buffer;
+	u32 current_word = 0;
+	u16 words_to_read;
+	s32 status;
+	u32 i;
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status) {
+		hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
+		return status;
+	}
+
+	while (words) {
+		if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+			words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+		else
+			words_to_read = words;
+
+		buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+		buffer.hdr.req.buf_lenh = 0;
+		buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+		buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+		/* convert offset from words to bytes */
+		buffer.address = cpu_to_be32((offset + current_word) * 2);
+		buffer.length = cpu_to_be16(words_to_read * 2);
+
+		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+						      sizeof(buffer),
+						      IXGBE_HI_COMMAND_TIMEOUT,
+						      false);
+		if (status) {
+			hw_dbg(hw, "Host interface command failed\n");
+			goto out;
+		}
+
+		for (i = 0; i < words_to_read; i++) {
+			u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+				  2 * i;
+			u32 value = IXGBE_READ_REG(hw, reg);
+
+			data[current_word] = (u16)(value & 0xffff);
+			current_word++;
+			i++;
+			if (i < words_to_read) {
+				value >>= 16;
+				data[current_word] = (u16)(value & 0xffff);
+				current_word++;
+			}
+		}
+		words -= words_to_read;
+	}
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/** ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ *  @hw: pointer to hardware structure
+ *  @ptr: pointer offset in eeprom
+ *  @size: size of section pointed by ptr, if 0 first word will be used as size
+ *  @csum: address of checksum to update
+ *
+ *  Returns error status for any failure
+ **/
+static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+				   u16 size, u16 *csum, u16 *buffer,
+				   u32 buffer_size)
+{
+	u16 buf[256];
+	s32 status;
+	u16 length, bufsz, i, start;
+	u16 *local_buffer;
+
+	bufsz = sizeof(buf) / sizeof(buf[0]);
+
+	/* Read a chunk at the pointer location */
+	if (!buffer) {
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+		if (status) {
+			hw_dbg(hw, "Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = buf;
+	} else {
+		if (buffer_size < ptr)
+			return  IXGBE_ERR_PARAM;
+		local_buffer = &buffer[ptr];
+	}
+
+	if (size) {
+		start = 0;
+		length = size;
+	} else {
+		start = 1;
+		length = local_buffer[0];
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (ptr + length) >= hw->eeprom.word_size)
+			return 0;
+	}
+
+	if (buffer && ((u32)start + (u32)length > buffer_size))
+		return IXGBE_ERR_PARAM;
+
+	for (i = start; length; i++, length--) {
+		if (i == bufsz && !buffer) {
+			ptr += bufsz;
+			i = 0;
+			if (length < bufsz)
+				bufsz = length;
+
+			/* Read a chunk at the pointer location */
+			status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+								  bufsz, buf);
+			if (status) {
+				hw_dbg(hw, "Failed to read EEPROM image\n");
+				return status;
+			}
+		}
+		*csum += local_buffer[i];
+	}
+	return 0;
+}
+
+/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *  @buffer: pointer to buffer containing calculated checksum
+ *  @buffer_size: size of buffer
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
+{
+	u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+	u16 *local_buffer;
+	s32 status;
+	u16 checksum = 0;
+	u16 pointer, i, size;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (!buffer) {
+		/* Read pointer area */
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+						IXGBE_EEPROM_LAST_WORD + 1,
+						eeprom_ptrs);
+		if (status) {
+			hw_dbg(hw, "Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = eeprom_ptrs;
+	} else {
+		if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+			return IXGBE_ERR_PARAM;
+		local_buffer = buffer;
+	}
+
+	/* For X550 hardware include 0x0-0x41 in the checksum, skip the
+	 * checksum word itself
+	 */
+	for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+		if (i != IXGBE_EEPROM_CHECKSUM)
+			checksum += local_buffer[i];
+
+	/* Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		pointer = local_buffer[i];
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		switch (i) {
+		case IXGBE_PCIE_GENERAL_PTR:
+			size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+			break;
+		case IXGBE_PCIE_CONFIG0_PTR:
+		case IXGBE_PCIE_CONFIG1_PTR:
+			size = IXGBE_PCIE_CONFIG_SIZE;
+			break;
+		default:
+			size = 0;
+			break;
+		}
+
+		status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+						 buffer, buffer_size);
+		if (status)
+			return status;
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *   Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					   &read_checksum);
+	if (status)
+		return status;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+		hw_dbg(hw, "Invalid EEPROM checksum");
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
+	struct ixgbe_hic_write_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* one word */
+	buffer.length = cpu_to_be16(sizeof(u16));
+	buffer.data = data;
+	buffer.address = cpu_to_be32(offset * 2);
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		hw_dbg(hw, "write ee hostif failed to get semaphore");
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ *  @hw: pointer to hardware structure
+ *
+ *  Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	union ixgbe_hic_hdr2 buffer;
+
+	buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+	buffer.req.buf_lenh = 0;
+	buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+	buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	return status;
+}
+
+/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ *  @hw: pointer to hardware structure
+ *
+ *  After writing EEPROM to shadow RAM using EEWR register, software calculates
+ *  checksum and updates the EEPROM and instructs the hardware to update
+ *  the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum = 0;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = ixgbe_calc_eeprom_checksum_X550(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					    checksum);
+	if (status)
+		return status;
+
+	status = ixgbe_update_flash_X550(hw);
+
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+				      u16 offset, u16 words, u16 *data)
+{
+	s32 status = 0;
+	u32 i = 0;
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status) {
+		hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
+		return status;
+	}
+
+	for (i = 0; i < words; i++) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+							 data[i]);
+		if (status) {
+			hw_dbg(hw, "Eeprom buffered write failed\n");
+			break;
+		}
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	return status;
+}
+
+/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ *  @hw: pointer to hardware structure
+ **/
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* CS4227 does not support autoneg, so disable the laser control
+	 * functions for SFP+ fiber
+	 */
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+	}
+}
+
+/** ixgbe_setup_sfp_modules_X550em - Setup SFP module
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+	bool setup_linear;
+	u16 reg_slice, edc_mode;
+	s32 ret_val;
+
+	switch (hw->phy.sfp_type) {
+	case ixgbe_sfp_type_unknown:
+		return 0;
+	case ixgbe_sfp_type_not_present:
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	case ixgbe_sfp_type_da_cu_core0:
+	case ixgbe_sfp_type_da_cu_core1:
+		setup_linear = true;
+		break;
+	case ixgbe_sfp_type_srlr_core0:
+	case ixgbe_sfp_type_srlr_core1:
+	case ixgbe_sfp_type_da_act_lmt_core0:
+	case ixgbe_sfp_type_da_act_lmt_core1:
+	case ixgbe_sfp_type_1g_sx_core0:
+	case ixgbe_sfp_type_1g_sx_core1:
+		setup_linear = false;
+		break;
+	default:
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	ixgbe_init_mac_link_ops_X550em(hw);
+	hw->phy.ops.reset = NULL;
+
+	/* The CS4227 slice address is the base address + the port-pair reg
+	 * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0.
+	 */
+	reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12);
+
+	if (setup_linear)
+		edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+	else
+		edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+
+	/* Configure CS4227 for connection type. */
+	ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+						 edc_mode);
+
+	if (ret_val)
+		ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice,
+							 edc_mode);
+
+	return ret_val;
+}
+
+/** ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ **/
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+				       ixgbe_link_speed *speed,
+				       bool *autoneg)
+{
+	/* SFP */
+	if (hw->phy.media_type == ixgbe_media_type_fiber) {
+		/* CS4227 SFP must not enable auto-negotiation */
+		*autoneg = false;
+
+		if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+			*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			return 0;
+		}
+
+		/* Link capabilities are based on SFP */
+		if (hw->phy.multispeed_fiber)
+			*speed = IXGBE_LINK_SPEED_10GB_FULL |
+				 IXGBE_LINK_SPEED_1GB_FULL;
+		else
+			*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	} else {
+		*speed = IXGBE_LINK_SPEED_10GB_FULL |
+			 IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+	}
+	return 0;
+}
+
+/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
+ *  IOSF device
+ *
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+				 u32 device_type, u32 data)
+{
+	u32 i, command, error;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	/* Write IOSF data register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The SB IOSF BUSY bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usleep_range(10, 20);
+
+		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		hw_dbg(hw, "Failed to write, error %x\n", error);
+		return IXGBE_ERR_PHY;
+	}
+
+	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+		hw_dbg(hw, "Write timed out\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ *  @hw: pointer to hardware structure
+ *  @speed: the link speed to force
+ *
+ *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ *  internal and external PHY at a specific speed, without autonegotiation.
+ **/
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable AN and force speed to 10G Serial. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal KR PHY. */
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Disable training protocol FSM. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Disable Flex from training TXFFE. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Enable override for coefficients. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ *  @hw: pointer to hardware structure
+ *
+ *   Configures the integrated KX4 PHY.
+ **/
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+					     IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+					     hw->bus.lan_id, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+		     IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+	/* Advertise 10G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+	/* Advertise 1G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+	/* Restart auto-negotiation. */
+	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+					      IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+					      hw->bus.lan_id, reg_val);
+
+	return status;
+}
+
+/**  ixgbe_setup_kr_x550em - Configure the KR PHY.
+ *   @hw: pointer to hardware structure
+ *
+ *   Configures the integrated KR PHY.
+ **/
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+	reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+		     IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+	/* Advertise 10G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+	/* Advertise 1G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+	/* Restart auto-negotiation. */
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
+ *  @hw: point to hardware structure
+ *
+ *  Configures the integrated KR PHY to talk to the external PHY. The base
+ *  driver will call this function when it gets notification via interrupt from
+ *  the external PHY. This function forces the internal PHY into iXFI mode at
+ *  the correct speed.
+ *
+ *  A return of a non-zero value indicates an error, and the base driver should
+ *  not report link up.
+ **/
+s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 lasi, autoneg_status, speed;
+	ixgbe_link_speed force_speed;
+
+	/* Verify that the external link status has changed */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi);
+	if (status)
+		return status;
+
+	/* If there was no change in link status, we can just exit */
+	if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
+		return 0;
+
+	/* we read this twice back to back to indicate current status */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+	if (status)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+	if (status)
+		return status;
+
+	/* If link is not up return an error indicating treat link as down */
+	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &speed);
+
+	/* clear everything but the speed and duplex bits */
+	speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+	switch (speed) {
+	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+		force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+		break;
+	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+		force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	default:
+		/* Internal PHY does not support anything else */
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+}
+
+/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ **/
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 esdp;
+
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+
+		if (hw->bus.lan_id) {
+			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+			esdp |= IXGBE_ESDP_SDP1_DIR;
+		}
+		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+	}
+
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_X550em(hw);
+	if (phy->sfp_type != ixgbe_sfp_type_unknown)
+		phy->ops.reset = NULL;
+
+	/* Set functions pointers based on phy type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_x550em_kx4:
+		phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_kr:
+		phy->ops.setup_link = ixgbe_setup_kr_x550em;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_ext_t:
+		phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
+		break;
+	default:
+		break;
+	}
+	return ret_val;
+}
+
+/** ixgbe_get_media_type_X550em - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ *
+ */
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_KR:
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+		 media_type = ixgbe_media_type_copper;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+	return media_type;
+}
+
+/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ ** @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 reg;
+	u32 retries = 2;
+
+	do {
+		/* decrement retries counter and exit if we hit 0 */
+		if (retries < 1) {
+			hw_dbg(hw, "External PHY not yet finished resetting.");
+			return IXGBE_ERR_PHY;
+		}
+		retries--;
+
+		status = hw->phy.ops.read_reg(hw,
+					      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+					      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					      &reg);
+		if (status)
+			return status;
+
+		/* Verify PHY FW reset has completed */
+	} while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1);
+
+	/* Set port to low power mode */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	/* Enable the transmitter */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE;
+
+	status = hw->phy.ops.write_reg(hw,
+				       IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+				       IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				       reg);
+	if (status)
+		return status;
+
+	/* Un-stall the PHY FW */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_GLOBAL_RES_PR_10,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+	status = hw->phy.ops.write_reg(hw,
+				       IXGBE_MDIO_GLOBAL_RES_PR_10,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+	return status;
+}
+
+/**  ixgbe_reset_hw_X550em - Perform hardware reset
+ **  @hw: pointer to hardware structure
+ **
+ **  Resets the hardware by resetting the transmit and receive units, masks
+ **  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ **  reset.
+ **/
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status;
+	u32 ctrl = 0;
+	u32 i;
+	bool link_up = false;
+
+	/* Call adapter stop to disable Tx/Rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status)
+		return status;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Identify PHY and related function pointers */
+	status = hw->phy.ops.init(hw);
+
+	/* start the external PHY */
+	if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+		status = ixgbe_init_ext_t_x550em(hw);
+		if (status)
+			return status;
+	}
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	/* Reset PHY */
+	if (!hw->phy.reset_disable && hw->phy.ops.reset)
+		hw->phy.ops.reset(hw);
+
+mac_reset_top:
+	/* Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	ctrl = IXGBE_CTRL_LNK_RST;
+
+	if (!hw->force_full_reset) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up)
+			ctrl = IXGBE_CTRL_RST;
+	}
+
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear meaning reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	msleep(50);
+
+	/* Double resets are required for recovery from certain error
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/* Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	return status;
+}
+
+#define X550_COMMON_MAC \
+	.init_hw			= &ixgbe_init_hw_generic, \
+	.start_hw			= &ixgbe_start_hw_X540, \
+	.clear_hw_cntrs			= &ixgbe_clear_hw_cntrs_generic, \
+	.enable_rx_dma			= &ixgbe_enable_rx_dma_generic, \
+	.get_mac_addr			= &ixgbe_get_mac_addr_generic, \
+	.get_device_caps		= &ixgbe_get_device_caps_generic, \
+	.stop_adapter			= &ixgbe_stop_adapter_generic, \
+	.get_bus_info			= &ixgbe_get_bus_info_generic, \
+	.set_lan_id			= &ixgbe_set_lan_id_multi_port_pcie, \
+	.read_analog_reg8		= NULL, \
+	.write_analog_reg8		= NULL, \
+	.set_rxpba			= &ixgbe_set_rxpba_generic, \
+	.check_link			= &ixgbe_check_mac_link_generic, \
+	.led_on				= &ixgbe_led_on_generic, \
+	.led_off			= &ixgbe_led_off_generic, \
+	.blink_led_start		= &ixgbe_blink_led_start_X540, \
+	.blink_led_stop			= &ixgbe_blink_led_stop_X540, \
+	.set_rar			= &ixgbe_set_rar_generic, \
+	.clear_rar			= &ixgbe_clear_rar_generic, \
+	.set_vmdq			= &ixgbe_set_vmdq_generic, \
+	.set_vmdq_san_mac		= &ixgbe_set_vmdq_san_mac_generic, \
+	.clear_vmdq			= &ixgbe_clear_vmdq_generic, \
+	.init_rx_addrs			= &ixgbe_init_rx_addrs_generic, \
+	.update_mc_addr_list		= &ixgbe_update_mc_addr_list_generic, \
+	.enable_mc			= &ixgbe_enable_mc_generic, \
+	.disable_mc			= &ixgbe_disable_mc_generic, \
+	.clear_vfta			= &ixgbe_clear_vfta_generic, \
+	.set_vfta			= &ixgbe_set_vfta_generic, \
+	.fc_enable			= &ixgbe_fc_enable_generic, \
+	.set_fw_drv_ver			= &ixgbe_set_fw_drv_ver_generic, \
+	.init_uta_tables		= &ixgbe_init_uta_tables_generic, \
+	.set_mac_anti_spoofing		= &ixgbe_set_mac_anti_spoofing, \
+	.set_vlan_anti_spoofing		= &ixgbe_set_vlan_anti_spoofing, \
+	.acquire_swfw_sync		= &ixgbe_acquire_swfw_sync_X540, \
+	.release_swfw_sync		= &ixgbe_release_swfw_sync_X540, \
+	.disable_rx_buff		= &ixgbe_disable_rx_buff_generic, \
+	.enable_rx_buff			= &ixgbe_enable_rx_buff_generic, \
+	.get_thermal_sensor_data	= NULL, \
+	.init_thermal_sensor_thresh	= NULL, \
+	.prot_autoc_read		= &prot_autoc_read_generic, \
+	.prot_autoc_write		= &prot_autoc_write_generic, \
+
+static struct ixgbe_mac_operations mac_ops_X550 = {
+	X550_COMMON_MAC
+	.reset_hw		= &ixgbe_reset_hw_X540,
+	.get_media_type		= &ixgbe_get_media_type_X540,
+	.get_san_mac_addr	= &ixgbe_get_san_mac_addr_generic,
+	.get_wwn_prefix		= &ixgbe_get_wwn_prefix_generic,
+	.setup_link		= &ixgbe_setup_mac_link_X540,
+	.set_rxpba		= &ixgbe_set_rxpba_generic,
+	.get_link_capabilities	= &ixgbe_get_copper_link_capabilities_generic,
+	.setup_sfp		= NULL,
+};
+
+static struct ixgbe_mac_operations mac_ops_X550EM_x = {
+	X550_COMMON_MAC
+	.reset_hw		= &ixgbe_reset_hw_X550em,
+	.get_media_type		= &ixgbe_get_media_type_X550em,
+	.get_san_mac_addr	= NULL,
+	.get_wwn_prefix		= NULL,
+	.setup_link		= NULL, /* defined later */
+	.get_link_capabilities	= &ixgbe_get_link_capabilities_X550em,
+	.setup_sfp		= ixgbe_setup_sfp_modules_X550em,
+
+};
+
+#define X550_COMMON_EEP \
+	.read			= &ixgbe_read_ee_hostif_X550, \
+	.read_buffer		= &ixgbe_read_ee_hostif_buffer_X550, \
+	.write			= &ixgbe_write_ee_hostif_X550, \
+	.write_buffer		= &ixgbe_write_ee_hostif_buffer_X550, \
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_X550, \
+	.update_checksum	= &ixgbe_update_eeprom_checksum_X550, \
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X550, \
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550 = {
+	X550_COMMON_EEP
+	.init_params		= &ixgbe_init_eeprom_params_X550,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
+	X550_COMMON_EEP
+	.init_params		= &ixgbe_init_eeprom_params_X540,
+};
+
+#define X550_COMMON_PHY	\
+	.identify_sfp		= &ixgbe_identify_module_generic, \
+	.reset			= NULL, \
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic, \
+	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic, \
+	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic, \
+	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic, \
+	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic, \
+	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic, \
+	.check_overtemp		= &ixgbe_tn_check_overtemp, \
+	.get_firmware_version	= &ixgbe_get_phy_firmware_version_generic,
+
+static struct ixgbe_phy_operations phy_ops_X550 = {
+	X550_COMMON_PHY
+	.init			= NULL,
+	.identify		= &ixgbe_identify_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.read_i2c_combined	= &ixgbe_read_i2c_combined_generic,
+	.write_i2c_combined	= &ixgbe_write_i2c_combined_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_X550EM_x = {
+	X550_COMMON_PHY
+	.init			= &ixgbe_init_phy_ops_X550em,
+	.identify		= &ixgbe_identify_phy_x550em,
+	.read_reg		= NULL, /* defined later */
+	.write_reg		= NULL, /* defined later */
+	.setup_link		= NULL, /* defined later */
+};
+
+struct ixgbe_info ixgbe_X550_info = {
+	.mac			= ixgbe_mac_X550,
+	.get_invariants		= &ixgbe_get_invariants_X540,
+	.mac_ops		= &mac_ops_X550,
+	.eeprom_ops		= &eeprom_ops_X550,
+	.phy_ops		= &phy_ops_X550,
+	.mbx_ops		= &mbx_ops_generic,
+};
+
+struct ixgbe_info ixgbe_X550EM_x_info = {
+	.mac			= ixgbe_mac_X550EM_x,
+	.get_invariants		= &ixgbe_get_invariants_X540,
+	.mac_ops		= &mac_ops_X550EM_x,
+	.eeprom_ops		= &eeprom_ops_X550EM_x,
+	.phy_ops		= &phy_ops_X550EM_x,
+	.mbx_ops		= &mbx_ops_generic,
+};