aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@armlinux.org.uk>2019-02-04 23:35:59 +0000
committerDavid S. Miller <davem@davemloft.net>2019-02-05 10:40:28 -0800
commitbf2fa12593c2bb77c7ab84254ac69af429d6719b (patch)
treeb93548c1610caab2814f7e48f98eecc47baa642f /drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
parentnet: marvell: mvpp2: use phy_interface_mode_is_8023z() helper (diff)
downloadlinux-dev-bf2fa12593c2bb77c7ab84254ac69af429d6719b.tar.xz
linux-dev-bf2fa12593c2bb77c7ab84254ac69af429d6719b.zip
net: marvell: mvpp2: fix lack of link interrupts
Sven Auhagen reports that if he changes a SFP+ module for a SFP module on the Macchiatobin Single Shot, the link does not come back up. For Sven, it is as easy as: - Insert a SFP+ module connected, and use ping6 to verify link is up. - Remove SFP+ module - Insert SFP 1000base-X module use ping6 to verify link is up: Link up event did not trigger and the link is down but that doesn't show the problem for me. Locally, this has been reproduced by: - Boot with no modules. - Insert SFP+ module, confirm link is up. - Replace module with 25000base-X module. Confirm link is up. - Set remote end down, link is reported as dropped at both ends. - Set remote end up, link is reported up at remote end, but not local end due to lack of link interrupt. Fix this by setting up both GMAC and XLG interrupts for port 0, but only unmasking the appropriate interrupt according to the current mode set in the mac_config() method. However, only do the mask/unmask dance when we are really changing the link mode to avoid missing any link interrupts. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r--drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c21
1 files changed, 14 insertions, 7 deletions
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 1b82202f8c17..5c0c26fd8363 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1133,7 +1133,8 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
{
u32 val;
- if (phy_interface_mode_is_rgmii(port->phy_interface) ||
+ if (port->phylink ||
+ phy_interface_mode_is_rgmii(port->phy_interface) ||
phy_interface_mode_is_8023z(port->phy_interface) ||
port->phy_interface == PHY_INTERFACE_MODE_SGMII) {
val = readl(port->base + MVPP22_GMAC_INT_MASK);
@@ -4620,6 +4621,7 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
const struct phylink_link_state *state)
{
struct mvpp2_port *port = netdev_priv(dev);
+ bool change_interface = port->phy_interface != state->interface;
/* Check for invalid configuration */
if (state->interface == PHY_INTERFACE_MODE_10GKR && port->gop_id != 0) {
@@ -4629,14 +4631,16 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
/* Make sure the port is disabled when reconfiguring the mode */
mvpp2_port_disable(port);
+ if (change_interface) {
+ mvpp22_gop_mask_irq(port);
- if (port->priv->hw_version == MVPP22 &&
- port->phy_interface != state->interface) {
- port->phy_interface = state->interface;
+ if (port->priv->hw_version == MVPP22) {
+ port->phy_interface = state->interface;
- /* Reconfigure the serdes lanes */
- phy_power_off(port->comphy);
- mvpp22_mode_reconfigure(port);
+ /* Reconfigure the serdes lanes */
+ phy_power_off(port->comphy);
+ mvpp22_mode_reconfigure(port);
+ }
}
/* mac (re)configuration */
@@ -4650,6 +4654,9 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK)
mvpp2_port_loopback_set(port, state);
+ if (change_interface)
+ mvpp22_gop_unmask_irq(port);
+
mvpp2_port_enable(port);
}