octeontx2-af: Enable mkex profile

The following set of NPC registers allow the driver to configure NPC
to generate different key value schemes to compare against packet
payload in MCAM search.

NPC_AF_INTF(0..1)_KEX_CFG
NPC_AF_KEX_LDATA(0..1)_FLAGS_CFG
NPC_AF_INTF(0..1)_LID(0..7)_LT(0..15)_LD(0..1)_CFG
NPC_AF_INTF(0..1)_LDATA(0..1)_FLAGS(0..15)_CFG

Currently, the AF driver populates these registers to
configure the default values to address the most common
use cases such as key generation for channel number + DMAC.

The secure firmware stores different configuration
value of these registers to enable different NPC use case
along with the name for the lookup.

Patch loads profile binary from secure firmware over
the exiting CGX mailbox interface and apply the profile.

AF driver shall fall back to the default configuration
in case of any errors.

The AF consumer driver can know the selected profile
on response to NPC_GET_KEX_CFG mailbox by introducing
mkex_pfl_name in the struct npc_get_kex_cfg_rsp.

Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 109 insertions, 2 deletions

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index bf81031f0fdd..15f70273e29c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -16,6 +16,7 @@
 #include "rvu_reg.h"
 #include "rvu.h"
 #include "npc.h"
+#include "cgx.h"
 #include "npc_profile.h"
 
 #define RSVD_MCAM_ENTRIES_PER_PF	2 /* Bcast & Promisc */
@@ -731,6 +732,111 @@ static void npc_config_ldata_extract(struct rvu *rvu, int blkaddr)
 	SET_KEX_LD(NIX_INTF_RX, NPC_LID_LD, NPC_LT_LD_TCP, 1, cfg);
 }
 
+static void npc_program_mkex_profile(struct rvu *rvu, int blkaddr,
+				     struct npc_mcam_kex *mkex)
+{
+	int lid, lt, ld, fl;
+
+	rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_RX),
+		    mkex->keyx_cfg[NIX_INTF_RX]);
+	rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_TX),
+		    mkex->keyx_cfg[NIX_INTF_TX]);
+
+	for (ld = 0; ld < NPC_MAX_LD; ld++)
+		rvu_write64(rvu, blkaddr, NPC_AF_KEX_LDATAX_FLAGS_CFG(ld),
+			    mkex->kex_ld_flags[ld]);
+
+	for (lid = 0; lid < NPC_MAX_LID; lid++) {
+		for (lt = 0; lt < NPC_MAX_LT; lt++) {
+			for (ld = 0; ld < NPC_MAX_LD; ld++) {
+				SET_KEX_LD(NIX_INTF_RX, lid, lt, ld,
+					   mkex->intf_lid_lt_ld[NIX_INTF_RX]
+					   [lid][lt][ld]);
+
+				SET_KEX_LD(NIX_INTF_TX, lid, lt, ld,
+					   mkex->intf_lid_lt_ld[NIX_INTF_TX]
+					   [lid][lt][ld]);
+			}
+		}
+	}
+
+	for (ld = 0; ld < NPC_MAX_LD; ld++) {
+		for (fl = 0; fl < NPC_MAX_LFL; fl++) {
+			SET_KEX_LDFLAGS(NIX_INTF_RX, ld, fl,
+					mkex->intf_ld_flags[NIX_INTF_RX]
+					[ld][fl]);
+
+			SET_KEX_LDFLAGS(NIX_INTF_TX, ld, fl,
+					mkex->intf_ld_flags[NIX_INTF_TX]
+					[ld][fl]);
+		}
+	}
+}
+
+/* strtoull of "mkexprof" with base:36 */
+#define MKEX_SIGN      0x19bbfdbd15f
+#define MKEX_END_SIGN  0xdeadbeef
+
+static void npc_load_mkex_profile(struct rvu *rvu, int blkaddr)
+{
+	const char *mkex_profile = rvu->mkex_pfl_name;
+	struct device *dev = &rvu->pdev->dev;
+	void __iomem *mkex_prfl_addr = NULL;
+	struct npc_mcam_kex *mcam_kex;
+	u64 prfl_addr;
+	u64 prfl_sz;
+
+	/* If user not selected mkex profile */
+	if (!strncmp(mkex_profile, "default", MKEX_NAME_LEN))
+		goto load_default;
+
+	if (cgx_get_mkex_prfl_info(&prfl_addr, &prfl_sz))
+		goto load_default;
+
+	if (!prfl_addr || !prfl_sz)
+		goto load_default;
+
+	mkex_prfl_addr = ioremap_wc(prfl_addr, prfl_sz);
+	if (!mkex_prfl_addr)
+		goto load_default;
+
+	mcam_kex = (struct npc_mcam_kex *)mkex_prfl_addr;
+
+	while (((s64)prfl_sz > 0) && (mcam_kex->mkex_sign != MKEX_END_SIGN)) {
+		/* Compare with mkex mod_param name string */
+		if (mcam_kex->mkex_sign == MKEX_SIGN &&
+		    !strncmp(mcam_kex->name, mkex_profile, MKEX_NAME_LEN)) {
+			/* Due to an errata (35786) in A0 pass silicon,
+			 * parse nibble enable configuration has to be
+			 * identical for both Rx and Tx interfaces.
+			 */
+			if (is_rvu_9xxx_A0(rvu) &&
+			    mcam_kex->keyx_cfg[NIX_INTF_RX] !=
+			    mcam_kex->keyx_cfg[NIX_INTF_TX])
+				goto load_default;
+
+			/* Program selected mkex profile */
+			npc_program_mkex_profile(rvu, blkaddr, mcam_kex);
+
+			goto unmap;
+		}
+
+		mcam_kex++;
+		prfl_sz -= sizeof(struct npc_mcam_kex);
+	}
+	dev_warn(dev, "Failed to load requested profile: %s\n",
+		 rvu->mkex_pfl_name);
+
+load_default:
+	dev_info(rvu->dev, "Using default mkex profile\n");
+	/* Config packet data and flags extraction into PARSE result */
+	npc_config_ldata_extract(rvu, blkaddr);
+
+unmap:
+	if (mkex_prfl_addr)
+		iounmap(mkex_prfl_addr);
+}
+
 static void npc_config_kpuaction(struct rvu *rvu, int blkaddr,
 				 struct npc_kpu_profile_action *kpuaction,
 				 int kpu, int entry, bool pkind)
@@ -1068,8 +1174,8 @@ int rvu_npc_init(struct rvu *rvu)
 	if (err)
 		return err;
 
-	/* Config packet data and flags extraction into PARSE result */
-	npc_config_ldata_extract(rvu, blkaddr);
+	/* Configure MKEX profile */
+	npc_load_mkex_profile(rvu, blkaddr);
 
 	/* Set TX miss action to UCAST_DEFAULT i.e
 	 * transmit the packet on NIX LF SQ's default channel.
@@ -2077,6 +2183,7 @@ int rvu_mbox_handler_npc_get_kex_cfg(struct rvu *rvu, struct msg_req *req,
 					GET_KEX_LDFLAGS(NIX_INTF_TX, ld, fl);
 		}
 	}
+	memcpy(rsp->mkex_pfl_name, rvu->mkex_pfl_name, MKEX_NAME_LEN);
 	return 0;
 }