octeontx2-pf: Add support for ethtool ntuple filters

This patch adds support for adding and deleting ethtool ntuple
filters. The filters for ether, ipv4, ipv6, tcp, udp and sctp
are supported. The mask is also supported. The supported actions
are drop and direct to a queue. Additionally we support FLOW_EXT
field vlan_tci and FLOW_MAC_EXT.

The NIX PF will allocate total 32 MCAM entries for the use of
ethtool ntuple filters. The Administrative Function(AF) will
install/delete the MCAM rules when NIX PF sends mailbox message
to install/delete the ntuple filters.

Ethtool ntuple filters support is restricted to PFs as of now
and PF can install ntuple filters to direct the traffic to its
VFs. Hence added a separate callback for VFs to get/set RSS
configuration.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 16 insertions, 2 deletions

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 672768630557..9cf3e19cf1d8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1733,7 +1733,6 @@ static void otx2_do_set_rx_mode(struct work_struct *work)
 
 	req->mode = NIX_RX_MODE_UCAST;
 
-	/* We don't support MAC address filtering yet */
 	if (netdev->flags & IFF_PROMISC)
 		req->mode |= NIX_RX_MODE_PROMISC;
 	else if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
@@ -1747,11 +1746,16 @@ static int otx2_set_features(struct net_device *netdev,
 			     netdev_features_t features)
 {
 	netdev_features_t changed = features ^ netdev->features;
+	bool ntuple = !!(features & NETIF_F_NTUPLE);
 	struct otx2_nic *pf = netdev_priv(netdev);
 
 	if ((changed & NETIF_F_LOOPBACK) && netif_running(netdev))
 		return otx2_cgx_config_loopback(pf,
 						features & NETIF_F_LOOPBACK);
+
+	if ((changed & NETIF_F_NTUPLE) && !ntuple)
+		otx2_destroy_ntuple_flows(pf);
+
 	return 0;
 }
 
@@ -2114,6 +2118,13 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	netdev->hw_features |= NETIF_F_LOOPBACK | NETIF_F_RXALL;
 
+	err = otx2_mcam_flow_init(pf);
+	if (err)
+		goto err_ptp_destroy;
+
+	if (pf->flags & OTX2_FLAG_NTUPLE_SUPPORT)
+		netdev->hw_features |= NETIF_F_NTUPLE;
+
 	netdev->gso_max_segs = OTX2_MAX_GSO_SEGS;
 	netdev->watchdog_timeo = OTX2_TX_TIMEOUT;
 
@@ -2126,7 +2137,7 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	err = register_netdev(netdev);
 	if (err) {
 		dev_err(dev, "Failed to register netdevice\n");
-		goto err_ptp_destroy;
+		goto err_del_mcam_entries;
 	}
 
 	err = otx2_wq_init(pf);
@@ -2146,6 +2157,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 err_unreg_netdev:
 	unregister_netdev(netdev);
+err_del_mcam_entries:
+	otx2_mcam_flow_del(pf);
 err_ptp_destroy:
 	otx2_ptp_destroy(pf);
 err_detach_rsrc:
@@ -2304,6 +2317,7 @@ static void otx2_remove(struct pci_dev *pdev)
 		destroy_workqueue(pf->otx2_wq);
 
 	otx2_ptp_destroy(pf);
+	otx2_mcam_flow_del(pf);
 	otx2_detach_resources(&pf->mbox);
 	otx2_disable_mbox_intr(pf);
 	otx2_pfaf_mbox_destroy(pf);