mlxsw: Add interface to access registers and process events

Ethernet Management Datagrams (EMADs) are Ethernet packets sent between
the host and the device in order to configure the available device registers.
Another use case is notifications sent from the device to the host,
letting it know about certain events, such as port up / down.

Add the ability to construct EMADs with provisions to construct and
parse the registers' payloads. Implement EMAD transaction layer
which is responsible for the reliable transmission of EMADs. Also, add
an infrastructure used by the switch driver to register for particular
events generated by the device.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Reviewed-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1289 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
new file mode 100644
index 000000000000..b5a72f8e78b1
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -0,0 +1,1289 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/reg.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_REG_H
+#define _MLXSW_REG_H
+
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+
+#include "item.h"
+#include "port.h"
+
+struct mlxsw_reg_info {
+	u16 id;
+	u16 len; /* In u8 */
+};
+
+#define MLXSW_REG(type) (&mlxsw_reg_##type)
+#define MLXSW_REG_LEN(type) MLXSW_REG(type)->len
+#define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len)
+
+/* SGCR - Switch General Configuration Register
+ * --------------------------------------------
+ * This register is used for configuration of the switch capabilities.
+ */
+#define MLXSW_REG_SGCR_ID 0x2000
+#define MLXSW_REG_SGCR_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_sgcr = {
+	.id = MLXSW_REG_SGCR_ID,
+	.len = MLXSW_REG_SGCR_LEN,
+};
+
+/* reg_sgcr_llb
+ * Link Local Broadcast (Default=0)
+ * When set, all Link Local packets (224.0.0.X) will be treated as broadcast
+ * packets and ignore the IGMP snooping entries.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1);
+
+static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb)
+{
+	MLXSW_REG_ZERO(sgcr, payload);
+	mlxsw_reg_sgcr_llb_set(payload, !!llb);
+}
+
+/* SPAD - Switch Physical Address Register
+ * ---------------------------------------
+ * The SPAD register configures the switch physical MAC address.
+ */
+#define MLXSW_REG_SPAD_ID 0x2002
+#define MLXSW_REG_SPAD_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_spad = {
+	.id = MLXSW_REG_SPAD_ID,
+	.len = MLXSW_REG_SPAD_LEN,
+};
+
+/* reg_spad_base_mac
+ * Base MAC address for the switch partitions.
+ * Per switch partition MAC address is equal to:
+ * base_mac + swid
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6);
+
+/* SMID - Switch Multicast ID
+ * --------------------------
+ * In multi-chip configuration, each device should maintain mapping between
+ * Multicast ID (MID) into a list of local ports. This mapping is used in all
+ * the devices other than the ingress device, and is implemented as part of the
+ * FDB. The MID record maps from a MID, which is a unique identi- fier of the
+ * multicast group within the stacking domain, into a list of local ports into
+ * which the packet is replicated.
+ */
+#define MLXSW_REG_SMID_ID 0x2007
+#define MLXSW_REG_SMID_LEN 0x420
+
+static const struct mlxsw_reg_info mlxsw_reg_smid = {
+	.id = MLXSW_REG_SMID_ID,
+	.len = MLXSW_REG_SMID_LEN,
+};
+
+/* reg_smid_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, smid, swid, 0x00, 24, 8);
+
+/* reg_smid_mid
+ * Multicast identifier - global identifier that represents the multicast group
+ * across all devices
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, smid, mid, 0x00, 0, 16);
+
+/* reg_smid_port
+ * Local port memebership (1 bit per port).
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, smid, port, 0x20, 0x20, 1);
+
+/* reg_smid_port_mask
+ * Local port mask (1 bit per port).
+ * Access: W
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, smid, port_mask, 0x220, 0x20, 1);
+
+static inline void mlxsw_reg_smid_pack(char *payload, u16 mid)
+{
+	MLXSW_REG_ZERO(smid, payload);
+	mlxsw_reg_smid_swid_set(payload, 0);
+	mlxsw_reg_smid_mid_set(payload, mid);
+	mlxsw_reg_smid_port_set(payload, MLXSW_PORT_CPU_PORT, 1);
+	mlxsw_reg_smid_port_mask_set(payload, MLXSW_PORT_CPU_PORT, 1);
+}
+
+/* SPMS - Switch Port MSTP/RSTP State Register
+ * -------------------------------------------
+ * Configures the spanning tree state of a physical port.
+ */
+#define MLXSW_REG_SPMS_ID 0x200d
+#define MLXSW_REG_SPMS_LEN 0x404
+
+static const struct mlxsw_reg_info mlxsw_reg_spms = {
+	.id = MLXSW_REG_SPMS_ID,
+	.len = MLXSW_REG_SPMS_LEN,
+};
+
+/* reg_spms_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_spms_state {
+	MLXSW_REG_SPMS_STATE_NO_CHANGE,
+	MLXSW_REG_SPMS_STATE_DISCARDING,
+	MLXSW_REG_SPMS_STATE_LEARNING,
+	MLXSW_REG_SPMS_STATE_FORWARDING,
+};
+
+/* reg_spms_state
+ * Spanning tree state of each VLAN ID (VID) of the local port.
+ * 0 - Do not change spanning tree state (used only when writing).
+ * 1 - Discarding. No learning or forwarding to/from this port (default).
+ * 2 - Learning. Port is learning, but not forwarding.
+ * 3 - Forwarding. Port is learning and forwarding.
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2);
+
+static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port, u16 vid,
+				       enum mlxsw_reg_spms_state state)
+{
+	MLXSW_REG_ZERO(spms, payload);
+	mlxsw_reg_spms_local_port_set(payload, local_port);
+	mlxsw_reg_spms_state_set(payload, vid, state);
+}
+
+/* SFGC - Switch Flooding Group Configuration
+ * ------------------------------------------
+ * The following register controls the association of flooding tables and MIDs
+ * to packet types used for flooding.
+ */
+#define MLXSW_REG_SFGC_ID  0x2011
+#define MLXSW_REG_SFGC_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_sfgc = {
+	.id = MLXSW_REG_SFGC_ID,
+	.len = MLXSW_REG_SFGC_LEN,
+};
+
+enum mlxsw_reg_sfgc_type {
+	MLXSW_REG_SFGC_TYPE_BROADCAST = 0,
+	MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST = 1,
+	MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4 = 2,
+	MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6 = 3,
+	MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP = 5,
+	MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL = 6,
+	MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST = 7,
+};
+
+/* reg_sfgc_type
+ * The traffic type to reach the flooding table.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4);
+
+enum mlxsw_reg_sfgc_bridge_type {
+	MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0,
+	MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1,
+};
+
+/* reg_sfgc_bridge_type
+ * Access: Index
+ *
+ * Note: SwitchX-2 only supports 802.1Q mode.
+ */
+MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3);
+
+enum mlxsw_flood_table_type {
+	MLXSW_REG_SFGC_TABLE_TYPE_VID = 1,
+	MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2,
+	MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0,
+	MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST = 3,
+	MLXSW_REG_SFGC_TABLE_TYPE_FID = 4,
+};
+
+/* reg_sfgc_table_type
+ * See mlxsw_flood_table_type
+ * Access: RW
+ *
+ * Note: FID offset and FID types are not supported in SwitchX-2.
+ */
+MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3);
+
+/* reg_sfgc_flood_table
+ * Flooding table index to associate with the specific type on the specific
+ * switch partition.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6);
+
+/* reg_sfgc_mid
+ * The multicast ID for the swid. Not supported for Spectrum
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16);
+
+/* reg_sfgc_counter_set_type
+ * Counter Set Type for flow counters.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8);
+
+/* reg_sfgc_counter_index
+ * Counter Index for flow counters.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24);
+
+static inline void
+mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type,
+		    enum mlxsw_reg_sfgc_bridge_type bridge_type,
+		    enum mlxsw_flood_table_type table_type,
+		    unsigned int flood_table)
+{
+	MLXSW_REG_ZERO(sfgc, payload);
+	mlxsw_reg_sfgc_type_set(payload, type);
+	mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type);
+	mlxsw_reg_sfgc_table_type_set(payload, table_type);
+	mlxsw_reg_sfgc_flood_table_set(payload, flood_table);
+	mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID);
+}
+
+/* SFTR - Switch Flooding Table Register
+ * -------------------------------------
+ * The switch flooding table is used for flooding packet replication. The table
+ * defines a bit mask of ports for packet replication.
+ */
+#define MLXSW_REG_SFTR_ID 0x2012
+#define MLXSW_REG_SFTR_LEN 0x420
+
+static const struct mlxsw_reg_info mlxsw_reg_sftr = {
+	.id = MLXSW_REG_SFTR_ID,
+	.len = MLXSW_REG_SFTR_LEN,
+};
+
+/* reg_sftr_swid
+ * Switch partition ID with which to associate the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8);
+
+/* reg_sftr_flood_table
+ * Flooding table index to associate with the specific type on the specific
+ * switch partition.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6);
+
+/* reg_sftr_index
+ * Index. Used as an index into the Flooding Table in case the table is
+ * configured to use VID / FID or FID Offset.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16);
+
+/* reg_sftr_table_type
+ * See mlxsw_flood_table_type
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3);
+
+/* reg_sftr_range
+ * Range of entries to update
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16);
+
+/* reg_sftr_port
+ * Local port membership (1 bit per port).
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1);
+
+/* reg_sftr_cpu_port_mask
+ * CPU port mask (1 bit per port).
+ * Access: W
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1);
+
+static inline void mlxsw_reg_sftr_pack(char *payload,
+				       unsigned int flood_table,
+				       unsigned int index,
+				       enum mlxsw_flood_table_type table_type,
+				       unsigned int range)
+{
+	MLXSW_REG_ZERO(sftr, payload);
+	mlxsw_reg_sftr_swid_set(payload, 0);
+	mlxsw_reg_sftr_flood_table_set(payload, flood_table);
+	mlxsw_reg_sftr_index_set(payload, index);
+	mlxsw_reg_sftr_table_type_set(payload, table_type);
+	mlxsw_reg_sftr_range_set(payload, range);
+	mlxsw_reg_sftr_port_set(payload, MLXSW_PORT_CPU_PORT, 1);
+	mlxsw_reg_sftr_port_mask_set(payload, MLXSW_PORT_CPU_PORT, 1);
+}
+
+/* SPMLR - Switch Port MAC Learning Register
+ * -----------------------------------------
+ * Controls the Switch MAC learning policy per port.
+ */
+#define MLXSW_REG_SPMLR_ID 0x2018
+#define MLXSW_REG_SPMLR_LEN 0x8
+
+static const struct mlxsw_reg_info mlxsw_reg_spmlr = {
+	.id = MLXSW_REG_SPMLR_ID,
+	.len = MLXSW_REG_SPMLR_LEN,
+};
+
+/* reg_spmlr_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8);
+
+/* reg_spmlr_sub_port
+ * Virtual port within the physical port.
+ * Should be set to 0 when virtual ports are not enabled on the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8);
+
+enum mlxsw_reg_spmlr_learn_mode {
+	MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0,
+	MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2,
+	MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3,
+};
+
+/* reg_spmlr_learn_mode
+ * Learning mode on the port.
+ * 0 - Learning disabled.
+ * 2 - Learning enabled.
+ * 3 - Security mode.
+ *
+ * In security mode the switch does not learn MACs on the port, but uses the
+ * SMAC to see if it exists on another ingress port. If so, the packet is
+ * classified as a bad packet and is discarded unless the software registers
+ * to receive port security error packets usign HPKT.
+ */
+MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2);
+
+static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port,
+					enum mlxsw_reg_spmlr_learn_mode mode)
+{
+	MLXSW_REG_ZERO(spmlr, payload);
+	mlxsw_reg_spmlr_local_port_set(payload, local_port);
+	mlxsw_reg_spmlr_sub_port_set(payload, 0);
+	mlxsw_reg_spmlr_learn_mode_set(payload, mode);
+}
+
+/* PMLP - Ports Module to Local Port Register
+ * ------------------------------------------
+ * Configures the assignment of modules to local ports.
+ */
+#define MLXSW_REG_PMLP_ID 0x5002
+#define MLXSW_REG_PMLP_LEN 0x40
+
+static const struct mlxsw_reg_info mlxsw_reg_pmlp = {
+	.id = MLXSW_REG_PMLP_ID,
+	.len = MLXSW_REG_PMLP_LEN,
+};
+
+/* reg_pmlp_rxtx
+ * 0 - Tx value is used for both Tx and Rx.
+ * 1 - Rx value is taken from a separte field.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1);
+
+/* reg_pmlp_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8);
+
+/* reg_pmlp_width
+ * 0 - Unmap local port.
+ * 1 - Lane 0 is used.
+ * 2 - Lanes 0 and 1 are used.
+ * 4 - Lanes 0, 1, 2 and 3 are used.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8);
+
+/* reg_pmlp_module
+ * Module number.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0, false);
+
+/* reg_pmlp_tx_lane
+ * Tx Lane. When rxtx field is cleared, this field is used for Rx as well.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 16, false);
+
+/* reg_pmlp_rx_lane
+ * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is
+ * equal to Tx lane.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 24, false);
+
+static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port)
+{
+	MLXSW_REG_ZERO(pmlp, payload);
+	mlxsw_reg_pmlp_local_port_set(payload, local_port);
+}
+
+/* PMTU - Port MTU Register
+ * ------------------------
+ * Configures and reports the port MTU.
+ */
+#define MLXSW_REG_PMTU_ID 0x5003
+#define MLXSW_REG_PMTU_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_pmtu = {
+	.id = MLXSW_REG_PMTU_ID,
+	.len = MLXSW_REG_PMTU_LEN,
+};
+
+/* reg_pmtu_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8);
+
+/* reg_pmtu_max_mtu
+ * Maximum MTU.
+ * When port type (e.g. Ethernet) is configured, the relevant MTU is
+ * reported, otherwise the minimum between the max_mtu of the different
+ * types is reported.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16);
+
+/* reg_pmtu_admin_mtu
+ * MTU value to set port to. Must be smaller or equal to max_mtu.
+ * Note: If port type is Infiniband, then port must be disabled, when its
+ * MTU is set.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16);
+
+/* reg_pmtu_oper_mtu
+ * The actual MTU configured on the port. Packets exceeding this size
+ * will be dropped.
+ * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband
+ * oper_mtu might be smaller than admin_mtu.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16);
+
+static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port,
+				       u16 new_mtu)
+{
+	MLXSW_REG_ZERO(pmtu, payload);
+	mlxsw_reg_pmtu_local_port_set(payload, local_port);
+	mlxsw_reg_pmtu_max_mtu_set(payload, 0);
+	mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu);
+	mlxsw_reg_pmtu_oper_mtu_set(payload, 0);
+}
+
+/* PTYS - Port Type and Speed Register
+ * -----------------------------------
+ * Configures and reports the port speed type.
+ *
+ * Note: When set while the link is up, the changes will not take effect
+ * until the port transitions from down to up state.
+ */
+#define MLXSW_REG_PTYS_ID 0x5004
+#define MLXSW_REG_PTYS_LEN 0x40
+
+static const struct mlxsw_reg_info mlxsw_reg_ptys = {
+	.id = MLXSW_REG_PTYS_ID,
+	.len = MLXSW_REG_PTYS_LEN,
+};
+
+/* reg_ptys_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8);
+
+#define MLXSW_REG_PTYS_PROTO_MASK_ETH	BIT(2)
+
+/* reg_ptys_proto_mask
+ * Protocol mask. Indicates which protocol is used.
+ * 0 - Infiniband.
+ * 1 - Fibre Channel.
+ * 2 - Ethernet.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
+
+#define MLXSW_REG_PTYS_ETH_SPEED_SGMII			BIT(0)
+#define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX		BIT(1)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4		BIT(2)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4		BIT(3)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR		BIT(4)
+#define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2		BIT(5)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4		BIT(6)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4		BIT(7)
+#define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4		BIT(8)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR		BIT(12)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR		BIT(13)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR		BIT(14)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4		BIT(15)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4	BIT(16)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4		BIT(19)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4		BIT(20)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4		BIT(21)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4		BIT(22)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4	BIT(23)
+#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX		BIT(24)
+#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T		BIT(25)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T		BIT(26)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR		BIT(27)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR		BIT(28)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR		BIT(29)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2		BIT(30)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2		BIT(31)
+
+/* reg_ptys_eth_proto_cap
+ * Ethernet port supported speeds and protocols.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32);
+
+/* reg_ptys_eth_proto_admin
+ * Speed and protocol to set port to.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32);
+
+/* reg_ptys_eth_proto_oper
+ * The current speed and protocol configured for the port.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32);
+
+static inline void mlxsw_reg_ptys_pack(char *payload, u8 local_port,
+				       u32 proto_admin)
+{
+	MLXSW_REG_ZERO(ptys, payload);
+	mlxsw_reg_ptys_local_port_set(payload, local_port);
+	mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH);
+	mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin);
+}
+
+static inline void mlxsw_reg_ptys_unpack(char *payload, u32 *p_eth_proto_cap,
+					 u32 *p_eth_proto_adm,
+					 u32 *p_eth_proto_oper)
+{
+	if (p_eth_proto_cap)
+		*p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload);
+	if (p_eth_proto_adm)
+		*p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload);
+	if (p_eth_proto_oper)
+		*p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload);
+}
+
+/* PPAD - Port Physical Address Register
+ * -------------------------------------
+ * The PPAD register configures the per port physical MAC address.
+ */
+#define MLXSW_REG_PPAD_ID 0x5005
+#define MLXSW_REG_PPAD_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_ppad = {
+	.id = MLXSW_REG_PPAD_ID,
+	.len = MLXSW_REG_PPAD_LEN,
+};
+
+/* reg_ppad_single_base_mac
+ * 0: base_mac, local port should be 0 and mac[7:0] is
+ * reserved. HW will set incremental
+ * 1: single_mac - mac of the local_port
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1);
+
+/* reg_ppad_local_port
+ * port number, if single_base_mac = 0 then local_port is reserved
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8);
+
+/* reg_ppad_mac
+ * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved.
+ * If single_base_mac = 1 - the per port MAC address
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6);
+
+static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac,
+				       u8 local_port)
+{
+	MLXSW_REG_ZERO(ppad, payload);
+	mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac);
+	mlxsw_reg_ppad_local_port_set(payload, local_port);
+}
+
+/* PAOS - Ports Administrative and Operational Status Register
+ * -----------------------------------------------------------
+ * Configures and retrieves per port administrative and operational status.
+ */
+#define MLXSW_REG_PAOS_ID 0x5006
+#define MLXSW_REG_PAOS_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_paos = {
+	.id = MLXSW_REG_PAOS_ID,
+	.len = MLXSW_REG_PAOS_LEN,
+};
+
+/* reg_paos_swid
+ * Switch partition ID with which to associate the port.
+ * Note: while external ports uses unique local port numbers (and thus swid is
+ * redundant), router ports use the same local port number where swid is the
+ * only indication for the relevant port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8);
+
+/* reg_paos_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8);
+
+/* reg_paos_admin_status
+ * Port administrative state (the desired state of the port):
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Up once. This means that in case of link failure, the port won't go
+ *     into polling mode, but will wait to be re-enabled by software.
+ * 4 - Disabled by system. Can only be set by hardware.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4);
+
+/* reg_paos_oper_status
+ * Port operational state (the current state):
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Down by port failure. This means that the device will not let the
+ *     port up again until explicitly specified by software.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4);
+
+/* reg_paos_ase
+ * Admin state update enabled.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1);
+
+/* reg_paos_ee
+ * Event update enable. If this bit is set, event generation will be
+ * updated based on the e field.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1);
+
+/* reg_paos_e
+ * Event generation on operational state change:
+ * 0 - Do not generate event.
+ * 1 - Generate Event.
+ * 2 - Generate Single Event.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2);
+
+static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port,
+				       enum mlxsw_port_admin_status status)
+{
+	MLXSW_REG_ZERO(paos, payload);
+	mlxsw_reg_paos_swid_set(payload, 0);
+	mlxsw_reg_paos_local_port_set(payload, local_port);
+	mlxsw_reg_paos_admin_status_set(payload, status);
+	mlxsw_reg_paos_oper_status_set(payload, 0);
+	mlxsw_reg_paos_ase_set(payload, 1);
+	mlxsw_reg_paos_ee_set(payload, 1);
+	mlxsw_reg_paos_e_set(payload, 1);
+}
+
+/* PPCNT - Ports Performance Counters Register
+ * -------------------------------------------
+ * The PPCNT register retrieves per port performance counters.
+ */
+#define MLXSW_REG_PPCNT_ID 0x5008
+#define MLXSW_REG_PPCNT_LEN 0x100
+
+static const struct mlxsw_reg_info mlxsw_reg_ppcnt = {
+	.id = MLXSW_REG_PPCNT_ID,
+	.len = MLXSW_REG_PPCNT_LEN,
+};
+
+/* reg_ppcnt_swid
+ * For HCA: must be always 0.
+ * Switch partition ID to associate port with.
+ * Switch partitions are numbered from 0 to 7 inclusively.
+ * Switch partition 254 indicates stacking ports.
+ * Switch partition 255 indicates all switch partitions.
+ * Only valid on Set() operation with local_port=255.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8);
+
+/* reg_ppcnt_local_port
+ * Local port number.
+ * 255 indicates all ports on the device, and is only allowed
+ * for Set() operation.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8);
+
+/* reg_ppcnt_pnat
+ * Port number access type:
+ * 0 - Local port number
+ * 1 - IB port number
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2);
+
+/* reg_ppcnt_grp
+ * Performance counter group.
+ * Group 63 indicates all groups. Only valid on Set() operation with
+ * clr bit set.
+ * 0x0: IEEE 802.3 Counters
+ * 0x1: RFC 2863 Counters
+ * 0x2: RFC 2819 Counters
+ * 0x3: RFC 3635 Counters
+ * 0x5: Ethernet Extended Counters
+ * 0x8: Link Level Retransmission Counters
+ * 0x10: Per Priority Counters
+ * 0x11: Per Traffic Class Counters
+ * 0x12: Physical Layer Counters
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6);
+
+/* reg_ppcnt_clr
+ * Clear counters. Setting the clr bit will reset the counter value
+ * for all counters in the counter group. This bit can be set
+ * for both Set() and Get() operation.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1);
+
+/* reg_ppcnt_prio_tc
+ * Priority for counter set that support per priority, valid values: 0-7.
+ * Traffic class for counter set that support per traffic class,
+ * valid values: 0- cap_max_tclass-1 .
+ * For HCA: cap_max_tclass is always 8.
+ * Otherwise must be 0.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5);
+
+/* reg_ppcnt_a_frames_transmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok,
+	     0x08 + 0x00, 0, 64);
+
+/* reg_ppcnt_a_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok,
+	     0x08 + 0x08, 0, 64);
+
+/* reg_ppcnt_a_frame_check_sequence_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors,
+	     0x08 + 0x10, 0, 64);
+
+/* reg_ppcnt_a_alignment_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_alignment_errors,
+	     0x08 + 0x18, 0, 64);
+
+/* reg_ppcnt_a_octets_transmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok,
+	     0x08 + 0x20, 0, 64);
+
+/* reg_ppcnt_a_octets_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok,
+	     0x08 + 0x28, 0, 64);
+
+/* reg_ppcnt_a_multicast_frames_xmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok,
+	     0x08 + 0x30, 0, 64);
+
+/* reg_ppcnt_a_broadcast_frames_xmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok,
+	     0x08 + 0x38, 0, 64);
+
+/* reg_ppcnt_a_multicast_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok,
+	     0x08 + 0x40, 0, 64);
+
+/* reg_ppcnt_a_broadcast_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok,
+	     0x08 + 0x48, 0, 64);
+
+/* reg_ppcnt_a_in_range_length_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors,
+	     0x08 + 0x50, 0, 64);
+
+/* reg_ppcnt_a_out_of_range_length_field
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field,
+	     0x08 + 0x58, 0, 64);
+
+/* reg_ppcnt_a_frame_too_long_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors,
+	     0x08 + 0x60, 0, 64);
+
+/* reg_ppcnt_a_symbol_error_during_carrier
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier,
+	     0x08 + 0x68, 0, 64);
+
+/* reg_ppcnt_a_mac_control_frames_transmitted
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted,
+	     0x08 + 0x70, 0, 64);
+
+/* reg_ppcnt_a_mac_control_frames_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received,
+	     0x08 + 0x78, 0, 64);
+
+/* reg_ppcnt_a_unsupported_opcodes_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received,
+	     0x08 + 0x80, 0, 64);
+
+/* reg_ppcnt_a_pause_mac_ctrl_frames_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received,
+	     0x08 + 0x88, 0, 64);
+
+/* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted,
+	     0x08 + 0x90, 0, 64);
+
+static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port)
+{
+	MLXSW_REG_ZERO(ppcnt, payload);
+	mlxsw_reg_ppcnt_swid_set(payload, 0);
+	mlxsw_reg_ppcnt_local_port_set(payload, local_port);
+	mlxsw_reg_ppcnt_pnat_set(payload, 0);
+	mlxsw_reg_ppcnt_grp_set(payload, 0);
+	mlxsw_reg_ppcnt_clr_set(payload, 0);
+	mlxsw_reg_ppcnt_prio_tc_set(payload, 0);
+}
+
+/* PSPA - Port Switch Partition Allocation
+ * ---------------------------------------
+ * Controls the association of a port with a switch partition and enables
+ * configuring ports as stacking ports.
+ */
+#define MLXSW_REG_PSPA_ID 0x500d
+#define MLXSW_REG_PSPA_LEN 0x8
+
+static const struct mlxsw_reg_info mlxsw_reg_pspa = {
+	.id = MLXSW_REG_PSPA_ID,
+	.len = MLXSW_REG_PSPA_LEN,
+};
+
+/* reg_pspa_swid
+ * Switch partition ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8);
+
+/* reg_pspa_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8);
+
+/* reg_pspa_sub_port
+ * Virtual port within the local port. Set to 0 when virtual ports are
+ * disabled on the local port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8);
+
+static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port)
+{
+	MLXSW_REG_ZERO(pspa, payload);
+	mlxsw_reg_pspa_swid_set(payload, swid);
+	mlxsw_reg_pspa_local_port_set(payload, local_port);
+	mlxsw_reg_pspa_sub_port_set(payload, 0);
+}
+
+/* HTGT - Host Trap Group Table
+ * ----------------------------
+ * Configures the properties for forwarding to CPU.
+ */
+#define MLXSW_REG_HTGT_ID 0x7002
+#define MLXSW_REG_HTGT_LEN 0x100
+
+static const struct mlxsw_reg_info mlxsw_reg_htgt = {
+	.id = MLXSW_REG_HTGT_ID,
+	.len = MLXSW_REG_HTGT_LEN,
+};
+
+/* reg_htgt_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8);
+
+#define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0	/* For locally attached CPU */
+
+/* reg_htgt_type
+ * CPU path type.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4);
+
+#define MLXSW_REG_HTGT_TRAP_GROUP_EMAD	0x0
+#define MLXSW_REG_HTGT_TRAP_GROUP_RX	0x1
+
+/* reg_htgt_trap_group
+ * Trap group number. User defined number specifying which trap groups
+ * should be forwarded to the CPU. The mapping between trap IDs and trap
+ * groups is configured using HPKT register.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8);
+
+enum {
+	MLXSW_REG_HTGT_POLICER_DISABLE,
+	MLXSW_REG_HTGT_POLICER_ENABLE,
+};
+
+/* reg_htgt_pide
+ * Enable policer ID specified using 'pid' field.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1);
+
+/* reg_htgt_pid
+ * Policer ID for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8);
+
+#define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0
+
+/* reg_htgt_mirror_action
+ * Mirror action to use.
+ * 0 - Trap to CPU.
+ * 1 - Trap to CPU and mirror to a mirroring agent.
+ * 2 - Mirror to a mirroring agent and do not trap to CPU.
+ * Access: RW
+ *
+ * Note: Mirroring to a mirroring agent is only supported in Spectrum.
+ */
+MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2);
+
+/* reg_htgt_mirroring_agent
+ * Mirroring agent.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3);
+
+/* reg_htgt_priority
+ * Trap group priority.
+ * In case a packet matches multiple classification rules, the packet will
+ * only be trapped once, based on the trap ID associated with the group (via
+ * register HPKT) with the highest priority.
+ * Supported values are 0-7, with 7 represnting the highest priority.
+ * Access: RW
+ *
+ * Note: In SwitchX-2 this field is ignored and the priority value is replaced
+ * by the 'trap_group' field.
+ */
+MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4);
+
+/* reg_htgt_local_path_cpu_tclass
+ * CPU ingress traffic class for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6);
+
+#define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD	0x15
+#define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX	0x14
+
+/* reg_htgt_local_path_rdq
+ * Receive descriptor queue (RDQ) to use for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6);
+
+static inline void mlxsw_reg_htgt_pack(char *payload, u8 trap_group)
+{
+	u8 swid, rdq;
+
+	MLXSW_REG_ZERO(htgt, payload);
+	if (MLXSW_REG_HTGT_TRAP_GROUP_EMAD == trap_group) {
+		swid = MLXSW_PORT_SWID_ALL_SWIDS;
+		rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD;
+	} else {
+		swid = 0;
+		rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX;
+	}
+	mlxsw_reg_htgt_swid_set(payload, swid);
+	mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL);
+	mlxsw_reg_htgt_trap_group_set(payload, trap_group);
+	mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_DISABLE);
+	mlxsw_reg_htgt_pid_set(payload, 0);
+	mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU);
+	mlxsw_reg_htgt_mirroring_agent_set(payload, 0);
+	mlxsw_reg_htgt_priority_set(payload, 0);
+	mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, 7);
+	mlxsw_reg_htgt_local_path_rdq_set(payload, rdq);
+}
+
+/* HPKT - Host Packet Trap
+ * -----------------------
+ * Configures trap IDs inside trap groups.
+ */
+#define MLXSW_REG_HPKT_ID 0x7003
+#define MLXSW_REG_HPKT_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_hpkt = {
+	.id = MLXSW_REG_HPKT_ID,
+	.len = MLXSW_REG_HPKT_LEN,
+};
+
+enum {
+	MLXSW_REG_HPKT_ACK_NOT_REQUIRED,
+	MLXSW_REG_HPKT_ACK_REQUIRED,
+};
+
+/* reg_hpkt_ack
+ * Require acknowledgements from the host for events.
+ * If set, then the device will wait for the event it sent to be acknowledged
+ * by the host. This option is only relevant for event trap IDs.
+ * Access: RW
+ *
+ * Note: Currently not supported by firmware.
+ */
+MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1);
+
+enum mlxsw_reg_hpkt_action {
+	MLXSW_REG_HPKT_ACTION_FORWARD,
+	MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU,
+	MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU,
+	MLXSW_REG_HPKT_ACTION_DISCARD,
+	MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
+	MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
+};
+
+/* reg_hpkt_action
+ * Action to perform on packet when trapped.
+ * 0 - No action. Forward to CPU based on switching rules.
+ * 1 - Trap to CPU (CPU receives sole copy).
+ * 2 - Mirror to CPU (CPU receives a replica of the packet).
+ * 3 - Discard.
+ * 4 - Soft discard (allow other traps to act on the packet).
+ * 5 - Trap and soft discard (allow other traps to overwrite this trap).
+ * Access: RW
+ *
+ * Note: Must be set to 0 (forward) for event trap IDs, as they are already
+ * addressed to the CPU.
+ */
+MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3);
+
+/* reg_hpkt_trap_group
+ * Trap group to associate the trap with.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6);
+
+/* reg_hpkt_trap_id
+ * Trap ID.
+ * Access: Index
+ *
+ * Note: A trap ID can only be associated with a single trap group. The device
+ * will associate the trap ID with the last trap group configured.
+ */
+MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
+
+enum {
+	MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,
+	MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER,
+	MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER,
+};
+
+/* reg_hpkt_ctrl
+ * Configure dedicated buffer resources for control packets.
+ * 0 - Keep factory defaults.
+ * 1 - Do not use control buffer for this trap ID.
+ * 2 - Use control buffer for this trap ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2);
+
+static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action,
+				       u8 trap_group, u16 trap_id)
+{
+	MLXSW_REG_ZERO(hpkt, payload);
+	mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED);
+	mlxsw_reg_hpkt_action_set(payload, action);
+	mlxsw_reg_hpkt_trap_group_set(payload, trap_group);
+	mlxsw_reg_hpkt_trap_id_set(payload, trap_id);
+	mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT);
+}
+
+static inline const char *mlxsw_reg_id_str(u16 reg_id)
+{
+	switch (reg_id) {
+	case MLXSW_REG_SGCR_ID:
+		return "SGCR";
+	case MLXSW_REG_SPAD_ID:
+		return "SPAD";
+	case MLXSW_REG_SMID_ID:
+		return "SMID";
+	case MLXSW_REG_SPMS_ID:
+		return "SPMS";
+	case MLXSW_REG_SFGC_ID:
+		return "SFGC";
+	case MLXSW_REG_SFTR_ID:
+		return "SFTR";
+	case MLXSW_REG_SPMLR_ID:
+		return "SPMLR";
+	case MLXSW_REG_PMLP_ID:
+		return "PMLP";
+	case MLXSW_REG_PMTU_ID:
+		return "PMTU";
+	case MLXSW_REG_PTYS_ID:
+		return "PTYS";
+	case MLXSW_REG_PPAD_ID:
+		return "PPAD";
+	case MLXSW_REG_PAOS_ID:
+		return "PAOS";
+	case MLXSW_REG_PPCNT_ID:
+		return "PPCNT";
+	case MLXSW_REG_PSPA_ID:
+		return "PSPA";
+	case MLXSW_REG_HTGT_ID:
+		return "HTGT";
+	case MLXSW_REG_HPKT_ID:
+		return "HPKT";
+	default:
+		return "*UNKNOWN*";
+	}
+}
+
+/* PUDE - Port Up / Down Event
+ * ---------------------------
+ * Reports the operational state change of a port.
+ */
+#define MLXSW_REG_PUDE_LEN 0x10
+
+/* reg_pude_swid
+ * Switch partition ID with which to associate the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8);
+
+/* reg_pude_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8);
+
+/* reg_pude_admin_status
+ * Port administrative state (the desired state).
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Up once. This means that in case of link failure, the port won't go
+ *     into polling mode, but will wait to be re-enabled by software.
+ * 4 - Disabled by system. Can only be set by hardware.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4);
+
+/* reg_pude_oper_status
+ * Port operatioanl state.
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Down by port failure. This means that the device will not let the
+ *     port up again until explicitly specified by software.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4);
+
+#endif