nfp: bpf: protect against mis-initializing atomic counters

Atomic operations on the NFP are currently always in big endian.
The driver keeps track of regions of memory storing atomic values
and byte swaps them accordingly.  There are corner cases where
the map values may be initialized before the driver knows they
are used as atomic counters.  This can happen either when the
datapath is performing the update and the stack contents are
unknown or when map is updated before the program which will
use it for atomic values is loaded.

To avoid situation where user initializes the value to 0 1 2 3
and then after loading a program which uses the word as an atomic
counter starts reading 3 2 1 0 - only allow atomic counters to be
initialized to endian-neutral values.

For updates from the datapath the stack information may not be
as precise, so just allow initializing such values to 0.

Example code which would break:
struct bpf_map_def SEC("maps") rxcnt = {
       .type = BPF_MAP_TYPE_HASH,
       .key_size = sizeof(__u32),
       .value_size = sizeof(__u64),
       .max_entries = 1,
};

int xdp_prog1()
{
      	__u64 nonzeroval = 3;
	__u32 key = 0;
	__u64 *value;

	value = bpf_map_lookup_elem(&rxcnt, &key);
	if (!value)
		bpf_map_update_elem(&rxcnt, &key, &nonzeroval, BPF_ANY);
	else
		__sync_fetch_and_add(value, 1);

	return XDP_PASS;
}

$ offload bpftool map dump
key: 00 00 00 00 value: 00 00 00 03 00 00 00 00

should be:

$ offload bpftool map dump
key: 00 00 00 00 value: 03 00 00 00 00 00 00 00

Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

1 files changed, 53 insertions, 5 deletions

diff --git a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
index 193dd685b365..e04035c116a4 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
@@ -80,6 +80,46 @@ exit_set_location:
 	nfp_prog->adjust_head_location = location;
 }
 
+static bool nfp_bpf_map_update_value_ok(struct bpf_verifier_env *env)
+{
+	const struct bpf_reg_state *reg1 = cur_regs(env) + BPF_REG_1;
+	const struct bpf_reg_state *reg3 = cur_regs(env) + BPF_REG_3;
+	struct bpf_offloaded_map *offmap;
+	struct bpf_func_state *state;
+	struct nfp_bpf_map *nfp_map;
+	int off, i;
+
+	state = env->cur_state->frame[reg3->frameno];
+
+	/* We need to record each time update happens with non-zero words,
+	 * in case such word is used in atomic operations.
+	 * Implicitly depend on nfp_bpf_stack_arg_ok(reg3) being run before.
+	 */
+
+	offmap = map_to_offmap(reg1->map_ptr);
+	nfp_map = offmap->dev_priv;
+	off = reg3->off + reg3->var_off.value;
+
+	for (i = 0; i < offmap->map.value_size; i++) {
+		struct bpf_stack_state *stack_entry;
+		unsigned int soff;
+
+		soff = -(off + i) - 1;
+		stack_entry = &state->stack[soff / BPF_REG_SIZE];
+		if (stack_entry->slot_type[soff % BPF_REG_SIZE] == STACK_ZERO)
+			continue;
+
+		if (nfp_map->use_map[i / 4].type == NFP_MAP_USE_ATOMIC_CNT) {
+			pr_vlog(env, "value at offset %d/%d may be non-zero, bpf_map_update_elem() is required to initialize atomic counters to zero to avoid offload endian issues\n",
+				i, soff);
+			return false;
+		}
+		nfp_map->use_map[i / 4].non_zero_update = 1;
+	}
+
+	return true;
+}
+
 static int
 nfp_bpf_stack_arg_ok(const char *fname, struct bpf_verifier_env *env,
 		     const struct bpf_reg_state *reg,
@@ -171,7 +211,8 @@ nfp_bpf_check_helper_call(struct nfp_prog *nfp_prog,
 					 bpf->helpers.map_update, reg1) ||
 		    !nfp_bpf_stack_arg_ok("map_update", env, reg2,
 					  meta->func_id ? &meta->arg2 : NULL) ||
-		    !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL))
+		    !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL) ||
+		    !nfp_bpf_map_update_value_ok(env))
 			return -EOPNOTSUPP;
 		break;
 
@@ -352,15 +393,22 @@ nfp_bpf_map_mark_used_one(struct bpf_verifier_env *env,
 			  struct nfp_bpf_map *nfp_map,
 			  unsigned int off, enum nfp_bpf_map_use use)
 {
-	if (nfp_map->use_map[off / 4] != NFP_MAP_UNUSED &&
-	    nfp_map->use_map[off / 4] != use) {
+	if (nfp_map->use_map[off / 4].type != NFP_MAP_UNUSED &&
+	    nfp_map->use_map[off / 4].type != use) {
 		pr_vlog(env, "map value use type conflict %s vs %s off: %u\n",
-			nfp_bpf_map_use_name(nfp_map->use_map[off / 4]),
+			nfp_bpf_map_use_name(nfp_map->use_map[off / 4].type),
 			nfp_bpf_map_use_name(use), off);
 		return -EOPNOTSUPP;
 	}
 
-	nfp_map->use_map[off / 4] = use;
+	if (nfp_map->use_map[off / 4].non_zero_update &&
+	    use == NFP_MAP_USE_ATOMIC_CNT) {
+		pr_vlog(env, "atomic counter in map value may already be initialized to non-zero value off: %u\n",
+			off);
+		return -EOPNOTSUPP;
+	}
+
+	nfp_map->use_map[off / 4].type = use;
 
 	return 0;
 }