qed: Fix LACP pdu drops for VFs

VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 8 insertions, 2 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index ca6290fa0f30..71a7af134dd8 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 	params.vport_id = vf->vport_id;
 	params.max_buffers_per_cqe = start->max_buffers_per_cqe;
 	params.mtu = vf->mtu;
-	params.check_mac = true;
+
+	/* Non trusted VFs should enable control frame filtering */
+	params.check_mac = !vf->p_vf_info.is_trusted_configured;
 
 	rc = qed_sp_eth_vport_start(p_hwfn, &params);
 	if (rc) {
@@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		params.opaque_fid = vf->opaque_fid;
 		params.vport_id = vf->vport_id;
 
+		params.update_ctl_frame_check = 1;
+		params.mac_chk_en = !vf_info->is_trusted_configured;
+
 		if (vf_info->rx_accept_mode & mask) {
 			flags->update_rx_mode_config = 1;
 			flags->rx_accept_filter = vf_info->rx_accept_mode;
@@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		}
 
 		if (flags->update_rx_mode_config ||
-		    flags->update_tx_mode_config)
+		    flags->update_tx_mode_config ||
+		    params.update_ctl_frame_check)
 			qed_sp_vport_update(hwfn, &params,
 					    QED_SPQ_MODE_EBLOCK, NULL);
 	}