diff options
| author |   Colin Ian King <colin.king@canonical.com> | 2019-01-14 15:37:01 +0000 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2019-01-16 14:04:22 -0800 |
| commit | eedfb2234bf77f2c17b68e702ce5c51ed4c72fbd (patch) | |
| tree | 34bdb3be6f2b6dec476ce5062f332f2e0f6d7d2f /drivers/net/ethernet/realtek/atp.c | |
| parent | bnx2x: fix various indentation issues (diff) | |
| download | linux-dev-eedfb2234bf77f2c17b68e702ce5c51ed4c72fbd.tar.xz linux-dev-eedfb2234bf77f2c17b68e702ce5c51ed4c72fbd.zip | |
drivers: net: atp: fix various indentation issues
There are various lines that have indentation issues, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/realtek/atp.c')
| -rw-r--r-- | drivers/net/ethernet/realtek/atp.c | 27 |
1 files changed, 15 insertions, 12 deletions
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c index 7e011c1c1e6e..cfb67b746595 100644 --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -454,14 +454,14 @@ static void hardware_init(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); long ioaddr = dev->base_addr; - int i; + int i; /* Turn off the printer multiplexer on the 8012. */ for (i = 0; i < 8; i++) outb(mux_8012[i], ioaddr + PAR_DATA); write_reg_high(ioaddr, CMR1, CMR1h_RESET); - for (i = 0; i < 6; i++) + for (i = 0; i < 6; i++) write_reg_byte(ioaddr, PAR0 + i, dev->dev_addr[i]); write_reg_high(ioaddr, CMR2, lp->addr_mode); @@ -471,15 +471,15 @@ static void hardware_init(struct net_device *dev) (read_nibble(ioaddr, CMR2_h) >> 3) & 0x0f); } - write_reg(ioaddr, CMR2, CMR2_IRQOUT); - write_reg_high(ioaddr, CMR1, CMR1h_RxENABLE | CMR1h_TxENABLE); + write_reg(ioaddr, CMR2, CMR2_IRQOUT); + write_reg_high(ioaddr, CMR1, CMR1h_RxENABLE | CMR1h_TxENABLE); /* Enable the interrupt line from the serial port. */ outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); /* Unmask the interesting interrupts. */ - write_reg(ioaddr, IMR, ISR_RxOK | ISR_TxErr | ISR_TxOK); - write_reg_high(ioaddr, IMR, ISRh_RxErr); + write_reg(ioaddr, IMR, ISR_RxOK | ISR_TxErr | ISR_TxOK); + write_reg_high(ioaddr, IMR, ISRh_RxErr); lp->tx_unit_busy = 0; lp->pac_cnt_in_tx_buf = 0; @@ -610,10 +610,12 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance) write_reg(ioaddr, CMR2, CMR2_NULL); write_reg(ioaddr, IMR, 0); - if (net_debug > 5) printk(KERN_DEBUG "%s: In interrupt ", dev->name); - while (--boguscount > 0) { + if (net_debug > 5) + printk(KERN_DEBUG "%s: In interrupt ", dev->name); + while (--boguscount > 0) { int status = read_nibble(ioaddr, ISR); - if (net_debug > 5) printk("loop status %02x..", status); + if (net_debug > 5) + printk("loop status %02x..", status); if (status & (ISR_RxOK<<3)) { handled = 1; @@ -640,7 +642,8 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance) } while (--boguscount > 0); } else if (status & ((ISR_TxErr + ISR_TxOK)<<3)) { handled = 1; - if (net_debug > 6) printk("handling Tx done.."); + if (net_debug > 6) + printk("handling Tx done.."); /* Clear the Tx interrupt. We should check for too many failures and reinitialize the adapter. */ write_reg(ioaddr, ISR, ISR_TxErr + ISR_TxOK); @@ -680,7 +683,7 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance) break; } else break; - } + } /* This following code fixes a rare (and very difficult to track down) problem where the adapter forgets its ethernet address. */ @@ -694,7 +697,7 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance) } /* Tell the adapter that it can go back to using the output line as IRQ. */ - write_reg(ioaddr, CMR2, CMR2_IRQOUT); + write_reg(ioaddr, CMR2, CMR2_IRQOUT); /* Enable the physical interrupt line, which is sure to be low until.. */ outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); /* .. we enable the interrupt sources. */ |