sfc: Move MTD operations into efx_nic_type

Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into
struct efx_nic_type.  Move the implementations into the appropriate
source files.

Several NVRAM functions are now only called from MTD operations which
are now implemented in the same file (falcon.c or mcdi.c).  There is no
need for them to be extern, or to be defined at all if CONFIG_SFC_MTD
is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections
in those files.

Most of the SPI-related definitions are also only used in falcon.c,
so move them there.  Put the remainder of spi.h into nic.h (which
previously included it).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

1 files changed, 0 insertions, 99 deletions

diff --git a/drivers/net/ethernet/sfc/spi.h b/drivers/net/ethernet/sfc/spi.h
deleted file mode 100644
index ee951feb0100..000000000000
--- a/drivers/net/ethernet/sfc/spi.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005 Fen Systems Ltd.
- * Copyright 2006-2010 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_SPI_H
-#define EFX_SPI_H
-
-#include "net_driver.h"
-
-/**************************************************************************
- *
- * Basic SPI command set and bit definitions
- *
- *************************************************************************/
-
-#define SPI_WRSR 0x01		/* Write status register */
-#define SPI_WRITE 0x02		/* Write data to memory array */
-#define SPI_READ 0x03		/* Read data from memory array */
-#define SPI_WRDI 0x04		/* Reset write enable latch */
-#define SPI_RDSR 0x05		/* Read status register */
-#define SPI_WREN 0x06		/* Set write enable latch */
-#define SPI_SST_EWSR 0x50	/* SST: Enable write to status register */
-
-#define SPI_STATUS_WPEN 0x80	/* Write-protect pin enabled */
-#define SPI_STATUS_BP2 0x10	/* Block protection bit 2 */
-#define SPI_STATUS_BP1 0x08	/* Block protection bit 1 */
-#define SPI_STATUS_BP0 0x04	/* Block protection bit 0 */
-#define SPI_STATUS_WEN 0x02	/* State of the write enable latch */
-#define SPI_STATUS_NRDY 0x01	/* Device busy flag */
-
-/**
- * struct falcon_spi_device - a Falcon SPI (Serial Peripheral Interface) device
- * @device_id:		Controller's id for the device
- * @size:		Size (in bytes)
- * @addr_len:		Number of address bytes in read/write commands
- * @munge_address:	Flag whether addresses should be munged.
- *	Some devices with 9-bit addresses (e.g. AT25040A EEPROM)
- *	use bit 3 of the command byte as address bit A8, rather
- *	than having a two-byte address.  If this flag is set, then
- *	commands should be munged in this way.
- * @erase_command:	Erase command (or 0 if sector erase not needed).
- * @erase_size:		Erase sector size (in bytes)
- *	Erase commands affect sectors with this size and alignment.
- *	This must be a power of two.
- * @block_size:		Write block size (in bytes).
- *	Write commands are limited to blocks with this size and alignment.
- */
-struct falcon_spi_device {
-	int device_id;
-	unsigned int size;
-	unsigned int addr_len;
-	unsigned int munge_address:1;
-	u8 erase_command;
-	unsigned int erase_size;
-	unsigned int block_size;
-};
-
-static inline bool falcon_spi_present(const struct falcon_spi_device *spi)
-{
-	return spi->size != 0;
-}
-
-int falcon_spi_cmd(struct efx_nic *efx,
-		   const struct falcon_spi_device *spi, unsigned int command,
-		   int address, const void *in, void *out, size_t len);
-int falcon_spi_wait_write(struct efx_nic *efx,
-			  const struct falcon_spi_device *spi);
-int falcon_spi_read(struct efx_nic *efx,
-		    const struct falcon_spi_device *spi, loff_t start,
-		    size_t len, size_t *retlen, u8 *buffer);
-int falcon_spi_write(struct efx_nic *efx,
-		     const struct falcon_spi_device *spi, loff_t start,
-		     size_t len, size_t *retlen, const u8 *buffer);
-
-/*
- * SFC4000 flash is partitioned into:
- *     0-0x400       chip and board config (see falcon_hwdefs.h)
- *     0x400-0x8000  unused (or may contain VPD if EEPROM not present)
- *     0x8000-end    boot code (mapped to PCI expansion ROM)
- * SFC4000 small EEPROM (size < 0x400) is used for VPD only.
- * SFC4000 large EEPROM (size >= 0x400) is partitioned into:
- *     0-0x400       chip and board config
- *     configurable  VPD
- *     0x800-0x1800  boot config
- * Aside from the chip and board config, all of these are optional and may
- * be absent or truncated depending on the devices used.
- */
-#define FALCON_NVCONFIG_END 0x400U
-#define FALCON_FLASH_BOOTCODE_START 0x8000U
-#define FALCON_EEPROM_BOOTCONFIG_START 0x800U
-#define FALCON_EEPROM_BOOTCONFIG_END 0x1800U
-
-#endif /* EFX_SPI_H */