|author||Karicheri, Muralidharan <email@example.com>||2015-01-29 18:15:51 -0500|
|committer||David S. Miller <firstname.lastname@example.org>||2015-01-31 17:33:07 -0800|
|parent||tcp: use SACK RTTs for CC (diff)|
drivers: net: cpsw: make cpsw_ale.c a module to allow re-use on Keystone
NetCP on Keystone has cpsw ale function similar to other TI SoCs and this driver is re-used. To allow both ti cpsw and keystone netcp to re-use the driver, convert the cpsw ale to a module and configure it through Kconfig option CONFIG_TI_CPSW_ALE. Currently it is statically linked to both TI CPSW and NetCP and this causes issues when the above drivers are built as dynamic modules. This patch addresses this issue While at it, fix the Makefile and code to build both netcp_core and netcp_ethss as dynamic modules. This is needed to support arm allmodconfig. This also requires exporting of API calls provided by netcp_core so that both the above can be dynamic modules. Signed-off-by: Murali Karicheri <email@example.com> Acked-by: Arnd Bergmann <firstname.lastname@example.org> Acked-by: Lad, Prabhakar <email@example.com> Acked-by: Mugunthan V N <firstname.lastname@example.org> Tested-by: Mugunthan V N <email@example.com> Signed-off-by: David S. Miller <firstname.lastname@example.org>
Diffstat (limited to 'drivers/net/ethernet/ti/Kconfig')
1 files changed, 17 insertions, 2 deletions
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 4ea1663f3dea..3bc992cd70b7 100644
@@ -56,12 +56,18 @@ config TI_CPSW_PHY_SEL
This driver supports configuring of the phy mode connected to
+ tristate "TI CPSW ALE Support"
+ This driver supports TI's CPSW ALE module.
tristate "TI CPSW Switch Support"
depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+ select TI_CPSW_ALE
@@ -80,15 +86,24 @@ config TI_CPTS
and Layer 2 packets, and the driver offers a PTP Hardware Clock.
- tristate "TI Keystone NETCP Ethernet subsystem Support"
+ tristate "TI Keystone NETCP Core Support"
+ select TI_CPSW_ALE
depends on OF
depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
- This driver supports TI's Keystone NETCP Ethernet subsystem.
+ This driver supports TI's Keystone NETCP Core.
To compile this driver as a module, choose M here: the module
will be called keystone_netcp.
+ depends on TI_KEYSTONE_NETCP
+ tristate "TI Keystone NETCP Ethernet subsystem Support"
+ To compile this driver as a module, choose M here: the module
+ will be called keystone_netcp_ethss.
tristate "TI ThunderLAN support"
depends on (PCI || EISA)