aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>2015-01-15 10:12:26 +0000
committerDavid S. Miller <davem@davemloft.net>2015-01-15 14:08:07 -0500
commit7994fe55a4a2009d9e9153ded4ac4369d1adaaa3 (patch)
treef7eaf4cb552146ab52065e5c7d13d63f1aebc8e1 /drivers/net/ethernet
parentsocket: use iov_length() (diff)
downloadlinux-dev-7994fe55a4a2009d9e9153ded4ac4369d1adaaa3.tar.xz
linux-dev-7994fe55a4a2009d9e9153ded4ac4369d1adaaa3.zip
dm9000: Add regulator and reset support to dm9000
In boards, the dm9000 chip's power and reset can be controlled by gpio. It makes sense to add them to the dm9000 driver and let dt be used to enable power and reset the phy. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/davicom/dm9000.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index ef0bb58750e6..c0a7813603c3 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -36,6 +36,9 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <asm/delay.h>
#include <asm/irq.h>
@@ -1426,11 +1429,48 @@ dm9000_probe(struct platform_device *pdev)
struct dm9000_plat_data *pdata = dev_get_platdata(&pdev->dev);
struct board_info *db; /* Point a board information structure */
struct net_device *ndev;
+ struct device *dev = &pdev->dev;
const unsigned char *mac_src;
int ret = 0;
int iosize;
int i;
u32 id_val;
+ int reset_gpios;
+ enum of_gpio_flags flags;
+ struct regulator *power;
+
+ power = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(power)) {
+ if (PTR_ERR(power) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_dbg(dev, "no regulator provided\n");
+ } else {
+ ret = regulator_enable(power);
+ if (ret != 0) {
+ dev_err(dev,
+ "Failed to enable power regulator: %d\n", ret);
+ return ret;
+ }
+ dev_dbg(dev, "regulator enabled\n");
+ }
+
+ reset_gpios = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0,
+ &flags);
+ if (gpio_is_valid(reset_gpios)) {
+ ret = devm_gpio_request_one(dev, reset_gpios, flags,
+ "dm9000_reset");
+ if (ret) {
+ dev_err(dev, "failed to request reset gpio %d: %d\n",
+ reset_gpios, ret);
+ return -ENODEV;
+ }
+
+ /* According to manual PWRST# Low Period Min 1ms */
+ msleep(2);
+ gpio_set_value(reset_gpios, 1);
+ /* Needs 3ms to read eeprom when PWRST is deasserted */
+ msleep(4);
+ }
if (!pdata) {
pdata = dm9000_parse_dt(&pdev->dev);