aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorPo Liu <po.liu@nxp.com>2019-11-25 05:56:56 +0000
committerDavid S. Miller <davem@davemloft.net>2019-11-25 10:53:15 -0800
commitc431047c4efe7903fb1c5a23e0f3f8eb1efc89f9 (patch)
tree03b2157b45851e8eab166609e2a267b5269f167f /drivers/net/ethernet
parentnet: phy: add helpers phy_(un)lock_mdio_bus (diff)
downloadlinux-dev-c431047c4efe7903fb1c5a23e0f3f8eb1efc89f9.tar.xz
linux-dev-c431047c4efe7903fb1c5a23e0f3f8eb1efc89f9.zip
enetc: add support Credit Based Shaper(CBS) for hardware offload
The ENETC hardware support the Credit Based Shaper(CBS) which part of the IEEE-802.1Qav. The CBS driver was loaded by the sch_cbs interface when set in the QOS in the kernel. Here is an example command to set 20Mbits bandwidth in 1Gbits port for taffic class 7: tc qdisc add dev eth0 root handle 1: mqprio \ num_tc 8 map 0 1 2 3 4 5 6 7 hw 1 tc qdisc replace dev eth0 parent 1:8 cbs \ locredit -1470 hicredit 30 \ sendslope -980000 idleslope 20000 offload 1 Signed-off-by: Po Liu <Po.Liu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/freescale/enetc/Kconfig4
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc.c2
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc.h2
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc_hw.h4
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc_qos.c128
5 files changed, 138 insertions, 2 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig
index 491659fe3e35..edad4ca46327 100644
--- a/drivers/net/ethernet/freescale/enetc/Kconfig
+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
@@ -53,10 +53,10 @@ config FSL_ENETC_HW_TIMESTAMPING
config FSL_ENETC_QOS
bool "ENETC hardware Time-sensitive Network support"
- depends on (FSL_ENETC || FSL_ENETC_VF) && NET_SCH_TAPRIO
+ depends on (FSL_ENETC || FSL_ENETC_VF) && (NET_SCH_TAPRIO || NET_SCH_CBS)
help
There are Time-Sensitive Network(TSN) capabilities(802.1Qbv/802.1Qci
/802.1Qbu etc.) supported by ENETC. These TSN capabilities can be set
enable/disable from user space via Qos commands(tc). In the kernel
side, it can be loaded by Qos driver. Currently, it is only support
- taprio(802.1Qbv).
+ taprio(802.1Qbv) and Credit Based Shaper(802.1Qbu).
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 27f6fd1708f0..9db1b96ed9b9 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1496,6 +1496,8 @@ int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type,
return enetc_setup_tc_mqprio(ndev, type_data);
case TC_SETUP_QDISC_TAPRIO:
return enetc_setup_tc_taprio(ndev, type_data);
+ case TC_SETUP_QDISC_CBS:
+ return enetc_setup_tc_cbs(ndev, type_data);
default:
return -EOPNOTSUPP;
}
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
index 89f23156f330..7ee0da6d0015 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -255,7 +255,9 @@ int enetc_send_cmd(struct enetc_si *si, struct enetc_cbd *cbd);
#ifdef CONFIG_FSL_ENETC_QOS
int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data);
void enetc_sched_speed_set(struct net_device *ndev);
+int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data);
#else
#define enetc_setup_tc_taprio(ndev, type_data) -EOPNOTSUPP
#define enetc_sched_speed_set(ndev) (void)0
+#define enetc_setup_tc_cbs(ndev, type_data) -EOPNOTSUPP
#endif
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 924ddb6d358a..51f543ef37a8 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -185,6 +185,8 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_PSICFGR0_SIVC(bmp) (((bmp) & 0xff) << 24) /* VLAN_TYPE */
#define ENETC_PTCCBSR0(n) (0x1110 + (n) * 8) /* n = 0 to 7*/
+#define ENETC_CBSE BIT(31)
+#define ENETC_CBS_BW_MASK GENMASK(6, 0)
#define ENETC_PTCCBSR1(n) (0x1114 + (n) * 8) /* n = 0 to 7*/
#define ENETC_RSSHASH_KEY_SIZE 40
#define ENETC_PRSSK(n) (0x1410 + (n) * 4) /* n = [0..9] */
@@ -603,6 +605,8 @@ struct enetc_cbd {
u8 status_flags;
};
+#define ENETC_CLK 400000000ULL
+
/* port time gating control register */
#define ENETC_QBV_PTGCR_OFFSET 0x11a00
#define ENETC_QBV_TGE BIT(31)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index 66a3da61ca16..2e99438cb1bf 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -4,6 +4,7 @@
#include "enetc.h"
#include <net/pkt_sched.h>
+#include <linux/math64.h>
static u16 enetc_get_max_gcl_len(struct enetc_hw *hw)
{
@@ -170,3 +171,130 @@ int enetc_setup_tc_taprio(struct net_device *ndev, void *type_data)
return err;
}
+
+static u32 enetc_get_cbs_enable(struct enetc_hw *hw, u8 tc)
+{
+ return enetc_port_rd(hw, ENETC_PTCCBSR0(tc)) & ENETC_CBSE;
+}
+
+static u8 enetc_get_cbs_bw(struct enetc_hw *hw, u8 tc)
+{
+ return enetc_port_rd(hw, ENETC_PTCCBSR0(tc)) & ENETC_CBS_BW_MASK;
+}
+
+int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data)
+{
+ struct enetc_ndev_priv *priv = netdev_priv(ndev);
+ struct tc_cbs_qopt_offload *cbs = type_data;
+ u32 port_transmit_rate = priv->speed;
+ u8 tc_nums = netdev_get_num_tc(ndev);
+ struct enetc_si *si = priv->si;
+ u32 hi_credit_bit, hi_credit_reg;
+ u32 max_interference_size;
+ u32 port_frame_max_size;
+ u32 tc_max_sized_frame;
+ u8 tc = cbs->queue;
+ u8 prio_top, prio_next;
+ int bw_sum = 0;
+ u8 bw;
+
+ prio_top = netdev_get_prio_tc_map(ndev, tc_nums - 1);
+ prio_next = netdev_get_prio_tc_map(ndev, tc_nums - 2);
+
+ /* Support highest prio and second prio tc in cbs mode */
+ if (tc != prio_top && tc != prio_next)
+ return -EOPNOTSUPP;
+
+ if (!cbs->enable) {
+ /* Make sure the other TC that are numerically
+ * lower than this TC have been disabled.
+ */
+ if (tc == prio_top &&
+ enetc_get_cbs_enable(&si->hw, prio_next)) {
+ dev_err(&ndev->dev,
+ "Disable TC%d before disable TC%d\n",
+ prio_next, tc);
+ return -EINVAL;
+ }
+
+ enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), 0);
+ enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc), 0);
+
+ return 0;
+ }
+
+ if (cbs->idleslope - cbs->sendslope != port_transmit_rate * 1000L ||
+ cbs->idleslope < 0 || cbs->sendslope > 0)
+ return -EOPNOTSUPP;
+
+ port_frame_max_size = ndev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ bw = cbs->idleslope / (port_transmit_rate * 10UL);
+
+ /* Make sure the other TC that are numerically
+ * higher than this TC have been enabled.
+ */
+ if (tc == prio_next) {
+ if (!enetc_get_cbs_enable(&si->hw, prio_top)) {
+ dev_err(&ndev->dev,
+ "Enable TC%d first before enable TC%d\n",
+ prio_top, prio_next);
+ return -EINVAL;
+ }
+ bw_sum += enetc_get_cbs_bw(&si->hw, prio_top);
+ }
+
+ if (bw_sum + bw >= 100) {
+ dev_err(&ndev->dev,
+ "The sum of all CBS Bandwidth can't exceed 100\n");
+ return -EINVAL;
+ }
+
+ tc_max_sized_frame = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(tc));
+
+ /* For top prio TC, the max_interfrence_size is maxSizedFrame.
+ *
+ * For next prio TC, the max_interfrence_size is calculated as below:
+ *
+ * max_interference_size = M0 + Ma + Ra * M0 / (R0 - Ra)
+ *
+ * - RA: idleSlope for AVB Class A
+ * - R0: port transmit rate
+ * - M0: maximum sized frame for the port
+ * - MA: maximum sized frame for AVB Class A
+ */
+
+ if (tc == prio_top) {
+ max_interference_size = port_frame_max_size * 8;
+ } else {
+ u32 m0, ma, r0, ra;
+
+ m0 = port_frame_max_size * 8;
+ ma = enetc_port_rd(&si->hw, ENETC_PTCMSDUR(prio_top)) * 8;
+ ra = enetc_get_cbs_bw(&si->hw, prio_top) *
+ port_transmit_rate * 10000ULL;
+ r0 = port_transmit_rate * 1000000ULL;
+ max_interference_size = m0 + ma +
+ (u32)div_u64((u64)ra * m0, r0 - ra);
+ }
+
+ /* hiCredit bits calculate by:
+ *
+ * maxSizedFrame * (idleSlope/portTxRate)
+ */
+ hi_credit_bit = max_interference_size * bw / 100;
+
+ /* hiCredit bits to hiCredit register need to calculated as:
+ *
+ * (enetClockFrequency / portTransmitRate) * 100
+ */
+ hi_credit_reg = (u32)div_u64((ENETC_CLK * 100ULL) * hi_credit_bit,
+ port_transmit_rate * 1000000ULL);
+
+ enetc_port_wr(&si->hw, ENETC_PTCCBSR1(tc), hi_credit_reg);
+
+ /* Set bw register and enable this traffic class */
+ enetc_port_wr(&si->hw, ENETC_PTCCBSR0(tc), bw | ENETC_CBSE);
+
+ return 0;
+}