aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/fddi/defxx.c
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2014-09-25 11:06:55 +0100
committerDavid S. Miller <davem@davemloft.net>2014-09-28 17:22:10 -0400
commitb98dfaf2b0a3e72fa5967dafb4f246442584a780 (patch)
tree4cc04f9085d0b1863dd6cf27e9fdc95d8b5d28cd /drivers/net/fddi/defxx.c
parentdefxx: DEFEA's Burst Holdoff register initialization fix (diff)
downloadlinux-dev-b98dfaf2b0a3e72fa5967dafb4f246442584a780.tar.xz
linux-dev-b98dfaf2b0a3e72fa5967dafb4f246442584a780.zip
defxx: DEFEA's ESIC port I/O decoding cleanup
Use the slot-specific I/O range for decoding accesses to PDQ ASIC registers (IOCS0) and the discrete Burst Holdoff register (IOCS1) as per the "HD64981F EISA Slave Interface Controller (ESIC)" datasheet. Use disjoint decode ranges now that the assignment of chip selects is known. Update the span of the port I/O resource requested accordingly. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r--drivers/net/fddi/defxx.c40
1 files changed, 26 insertions, 14 deletions
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 15a18fbe30cf..caed6eee289c 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -466,7 +466,8 @@ static void dfx_get_bars(struct device *bdev,
*bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
} else {
*bar_start = base_addr;
- *bar_len = PI_ESIC_K_CSR_IO_LEN;
+ *bar_len = PI_ESIC_K_CSR_IO_LEN +
+ PI_ESIC_K_BURST_HOLDOFF_LEN;
}
}
if (dfx_bus_tc) {
@@ -683,6 +684,9 @@ static void dfx_bus_init(struct net_device *dev)
if (dfx_bus_eisa) {
unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+ /* Disable the board before fiddling with the decoders. */
+ outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
/* Get the interrupt level from the ESIC chip. */
val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
val &= PI_CONFIG_STAT_0_M_IRQ;
@@ -709,25 +713,33 @@ static void dfx_bus_init(struct net_device *dev)
/*
* Enable memory decoding (MEMCS0) and/or port decoding
* (IOCS1/IOCS0) as appropriate in Function Control
- * Register. One of the port chip selects seems to be
- * used for the Burst Holdoff register, but this bit of
- * documentation is missing and as yet it has not been
- * determined which of the two. This is also the reason
- * the size of the decoded port range is twice as large
- * as one required by the PDQ.
+ * Register. IOCS0 is used for PDQ registers, taking 16
+ * 32-bit words, while IOCS1 is used for the Burst Holdoff
+ * register, taking a single 32-bit word only. We use the
+ * slot-specific I/O range as per the ESIC spec, that is
+ * set bits 15:12 in the mask registers to mask them out.
*/
/* Set the decode range of the board. */
- val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT);
+ val = 0;
outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0);
- outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0);
- val = PI_ESIC_K_CSR_IO_LEN - 1;
+ val = PI_DEFEA_K_CSR_IO;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0);
+
+ val = PI_IO_CMP_M_SLOT;
outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0);
+ val = (PI_ESIC_K_CSR_IO_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0);
+
+ val = 0;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1);
+ val = PI_DEFEA_K_BURST_HOLDOFF;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0);
+
+ val = PI_IO_CMP_M_SLOT;
outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
+ val = (PI_ESIC_K_BURST_HOLDOFF_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
/* Enable the decoders. */
val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;