diff options
| author |   Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> | 2009-05-17 12:35:16 +0000 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2009-05-17 21:04:13 -0700 |
| commit | 264857b8fe8a16fc95f12e898951fc6bd4bdaa7a (patch) | |
| tree | efb090175b49f72170555eab18cdcf1156ed2a4a /drivers/net/ixgbe/ixgbe_main.c | |
| parent | ixgbe: Set Priority Flow Control low water threshhold for DCB (diff) | |
| download | linux-dev-264857b8fe8a16fc95f12e898951fc6bd4bdaa7a.tar.xz linux-dev-264857b8fe8a16fc95f12e898951fc6bd4bdaa7a.zip | |
ixgbe: Allow link flow control in DCB mode for 82599 adapters
82599 supports using either link flow control or priority flow control when
in DCB mode. The dcbnl interface already supports sending down
configurations through rtnetlink that can enable LFC when DCB is enabled,
so the driver should take advantage of this.
82598 does not support using LFC when DCB is enabled, so explicitly disable
it when we're in DCB mode. This means we always run in PFC mode when DCB
is enabled.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 1b4af3f541b7..b53f26501173 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3554,6 +3554,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100; adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100; adapter->dcb_cfg.rx_pba_cfg = pba_equal; + adapter->dcb_cfg.pfc_mode_enable = false; adapter->dcb_cfg.round_robin_enable = false; adapter->dcb_set_bitmap = 0x00; ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg, @@ -3564,6 +3565,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) /* default flow control settings */ hw->fc.requested_mode = ixgbe_fc_full; hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ +#ifdef CONFIG_DCB + adapter->last_lfc_mode = hw->fc.current_mode; +#endif hw->fc.high_water = IXGBE_DEFAULT_FCRTH; hw->fc.low_water = IXGBE_DEFAULT_FCRTL; hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; @@ -4319,11 +4323,24 @@ static void ixgbe_watchdog_task(struct work_struct *work) if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) { hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) { +#ifdef CONFIG_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + hw->mac.ops.setup_fc(hw, i); + } else { + hw->mac.ops.setup_fc(hw, 0); + } +#else + hw->mac.ops.setup_fc(hw, 0); +#endif + } + if (link_up || time_after(jiffies, (adapter->link_check_timeout + IXGBE_TRY_LINK_TIMEOUT))) { - IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); } adapter->link_up = link_up; adapter->link_speed = link_speed; |