diff options
| author |   Stanislaw Gruszka <stf_xl@wp.pl> | 2013-03-16 19:19:46 +0100 |
|---|---|---|
| committer |   John W. Linville <linville@tuxdriver.com> | 2013-03-18 16:38:34 -0400 |
| commit | c630ccf1a127578421a928489d51e99c05037054 (patch) | |
| tree | 5f16458f2f044270ac5df8b4f0a43c2dcfea346b /drivers/net/wireless/rt2x00/rt2800lib.c | |
| parent | rt2800: 5592: add iq calibration (diff) | |
| download | linux-dev-c630ccf1a127578421a928489d51e99c05037054.tar.xz linux-dev-c630ccf1a127578421a928489d51e99c05037054.zip | |
rt2800: rearrange bbp/rfcsr initialization
This makes order of initialization of various registers similar like
on vendor driver.
Based on:
NICInitializeAsic()
RT5592LoadRFNormalModeSetup()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chip/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 50 |
1 files changed, 45 insertions, 5 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index e96ea3298c7c..e36cf4a233fe 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4713,6 +4713,9 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) { + u8 reg; + u16 eeprom; + rt2800_rfcsr_write(rt2x00dev, 1, 0x3F); rt2800_rfcsr_write(rt2x00dev, 3, 0x08); rt2800_rfcsr_write(rt2x00dev, 3, 0x08); @@ -4740,6 +4743,35 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) msleep(1); rt2800_adjust_freq_offset(rt2x00dev); + + rt2800_bbp_read(rt2x00dev, 138, ®); + + /* Turn off unused DAC1 and ADC1 to reduce power consumption */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) + rt2x00_set_field8(®, BBP138_RX_ADC1, 0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) + rt2x00_set_field8(®, BBP138_TX_DAC1, 1); + + rt2800_bbp_write(rt2x00dev, 138, reg); + + /* Enable DC filter */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_rfcsr_read(rt2x00dev, 38, ®); + rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 38, reg); + + rt2800_rfcsr_read(rt2x00dev, 39, ®); + rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 39, reg); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_rfcsr_read(rt2x00dev, 30, ®); + rt2x00_set_field8(®, RFCSR30_RX_VCM, 2); + rt2800_rfcsr_write(rt2x00dev, 30, reg); } static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) @@ -4817,7 +4849,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) break; case RT5592: rt2800_init_rfcsr_5592(rt2x00dev); - break; + return 0; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { @@ -5024,15 +5056,23 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) * Initialize all registers. */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + rt2800_init_registers(rt2x00dev))) return -EIO; /* * Send signal to firmware during boot time. */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + } + msleep(1); + + if (unlikely(rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; if (rt2x00_is_usb(rt2x00dev) && (rt2x00_rt(rt2x00dev, RT3070) || |