aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-05-20 20:43:09 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 00:21:56 -0700
commitf2148a472883ddf77626fff52b070655a8a0a788 (patch)
tree4224e4b1f7b7bbec8a5c5ebbd2ed1e2a69a89b9a /drivers/net
parentskge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers (diff)
downloadlinux-dev-f2148a472883ddf77626fff52b070655a8a0a788.tar.xz
linux-dev-f2148a472883ddf77626fff52b070655a8a0a788.zip
via-*: Move the VIA drivers
Move the VIA drivers into drivers/net/ethernet/via/ and make the necessary Kconfig and Makefile changes. CC: Roger Luethi <rl@hellgate.ch> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig36
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/ethernet/Kconfig1
-rw-r--r--drivers/net/ethernet/Makefile1
-rw-r--r--drivers/net/ethernet/via/Kconfig56
-rw-r--r--drivers/net/ethernet/via/Makefile6
-rw-r--r--drivers/net/ethernet/via/via-rhine.c (renamed from drivers/net/via-rhine.c)0
-rw-r--r--drivers/net/ethernet/via/via-velocity.c (renamed from drivers/net/via-velocity.c)0
-rw-r--r--drivers/net/ethernet/via/via-velocity.h (renamed from drivers/net/via-velocity.h)0
9 files changed, 64 insertions, 38 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb6c6947b320..c1e491add8f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -614,30 +614,6 @@ config KS8851_MLL
This platform driver is for Micrel KS8851 Address/data bus
multiplexed network chip.
-config VIA_RHINE
- tristate "VIA Rhine support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
- Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
- Ethernet functions can also be found integrated on South Bridges
- (e.g. VT8235).
-
- To compile this driver as a module, choose M here. The module
- will be called via-rhine.
-
-config VIA_RHINE_MMIO
- bool "Use MMIO instead of PIO"
- depends on VIA_RHINE
- help
- This instructs the driver to use PCI shared memory (MMIO) instead of
- programmed I/O ports (PIO). Enabling this gives an improvement in
- processing time in parts of the driver.
-
- If unsure, say Y.
-
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -793,18 +769,6 @@ config SIS190
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
-config VIA_VELOCITY
- tristate "VIA Velocity support"
- depends on PCI
- select CRC32
- select CRC_CCITT
- select MII
- help
- If you have a VIA "Velocity" based network card say Y here.
-
- To compile this driver as a module, choose M here. The module
- will be called via-velocity.
-
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 69ca6a009c59..7e1128fd62bd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -51,8 +51,6 @@ obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1c447d96d7e5..bdc0df873daf 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -45,5 +45,6 @@ source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 48c8656b96c2..ac60ac9026bb 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_VIA) += via/
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
new file mode 100644
index 000000000000..7199194fa898
--- /dev/null
+++ b/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,56 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+ bool "VIA devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about VIA devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+ tristate "VIA Rhine support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+ Ethernet functions can also be found integrated on South Bridges
+ (e.g. VT8235).
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-rhine.
+
+config VIA_RHINE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on VIA_RHINE
+ ---help---
+ This instructs the driver to use PCI shared memory (MMIO) instead of
+ programmed I/O ports (PIO). Enabling this gives an improvement in
+ processing time in parts of the driver.
+
+ If unsure, say Y.
+
+config VIA_VELOCITY
+ tristate "VIA Velocity support"
+ depends on PCI
+ select CRC32
+ select CRC_CCITT
+ select MII
+ ---help---
+ If you have a VIA "Velocity" based network card say Y here.
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-velocity.
+
+endif # NET_VENDOR_VIA
diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile
new file mode 100644
index 000000000000..46c5d4a3d8f1
--- /dev/null
+++ b/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/drivers/net/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 7f23ab913fd9..7f23ab913fd9 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
diff --git a/drivers/net/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index 490ec5b2775a..490ec5b2775a 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
diff --git a/drivers/net/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h
index 4cb9f13485e9..4cb9f13485e9 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/ethernet/via/via-velocity.h