pinctrl: amlogic: Make driver independent from two-domain configuration

In the Amlogic Meson8 / Meson8b platforms we have two different buses:
cbus and aobus, corresponding to 2 different power domains (regular and
always-on). On each bus a different set of registers is mapped to manage
muxes, GPIOs and in general to control a clear subset of the pins.

Considering this architecture, having two different pinctrl devices, one
for each bus / power domain, makes much more sense than just having one
single device.

Right now we have one single pin controller driver that uses two
different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the
DTS) to manage the set of registers on the two buses. This dual-domain
configuration is hardcoded into the driver that strictly requires one
domain for each bus in the same pin controller device.

With this patch we refactor the driver to allow splitting the driver in
two parts. This change is needed to have a proper description of the HW
in the device-tree where we want to introduce aobus and cbus.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 77 insertions, 60 deletions

diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index 7b1cc91733ef..32de191e0807 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -16,7 +16,7 @@
 
 #define AO_OFF	120
 
-static const struct pinctrl_pin_desc meson8_pins[] = {
+static const struct pinctrl_pin_desc meson8_cbus_pins[] = {
 	MESON_PIN(GPIOX_0, 0),
 	MESON_PIN(GPIOX_1, 0),
 	MESON_PIN(GPIOX_2, 0),
@@ -137,6 +137,9 @@ static const struct pinctrl_pin_desc meson8_pins[] = {
 	MESON_PIN(BOOT_16, 0),
 	MESON_PIN(BOOT_17, 0),
 	MESON_PIN(BOOT_18, 0),
+};
+
+static const struct pinctrl_pin_desc meson8_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, AO_OFF),
 	MESON_PIN(GPIOAO_1, AO_OFF),
 	MESON_PIN(GPIOAO_2, AO_OFF),
@@ -379,7 +382,7 @@ static const unsigned int uart_rx_ao_b1_pins[] = { PIN(GPIOAO_5, AO_OFF) };
 static const unsigned int i2c_mst_sck_ao_pins[] = { PIN(GPIOAO_4, AO_OFF) };
 static const unsigned int i2c_mst_sda_ao_pins[] = { PIN(GPIOAO_5, AO_OFF) };
 
-static struct meson_pmx_group meson8_groups[] = {
+static struct meson_pmx_group meson8_cbus_groups[] = {
 	GPIO_GROUP(GPIOX_0, 0),
 	GPIO_GROUP(GPIOX_1, 0),
 	GPIO_GROUP(GPIOX_2, 0),
@@ -474,22 +477,6 @@ static struct meson_pmx_group meson8_groups[] = {
 	GPIO_GROUP(GPIOZ_12, 0),
 	GPIO_GROUP(GPIOZ_13, 0),
 	GPIO_GROUP(GPIOZ_14, 0),
-	GPIO_GROUP(GPIOAO_0, AO_OFF),
-	GPIO_GROUP(GPIOAO_1, AO_OFF),
-	GPIO_GROUP(GPIOAO_2, AO_OFF),
-	GPIO_GROUP(GPIOAO_3, AO_OFF),
-	GPIO_GROUP(GPIOAO_4, AO_OFF),
-	GPIO_GROUP(GPIOAO_5, AO_OFF),
-	GPIO_GROUP(GPIOAO_6, AO_OFF),
-	GPIO_GROUP(GPIOAO_7, AO_OFF),
-	GPIO_GROUP(GPIOAO_8, AO_OFF),
-	GPIO_GROUP(GPIOAO_9, AO_OFF),
-	GPIO_GROUP(GPIOAO_10, AO_OFF),
-	GPIO_GROUP(GPIOAO_11, AO_OFF),
-	GPIO_GROUP(GPIOAO_12, AO_OFF),
-	GPIO_GROUP(GPIOAO_13, AO_OFF),
-	GPIO_GROUP(GPIO_BSD_EN, AO_OFF),
-	GPIO_GROUP(GPIO_TEST_N, AO_OFF),
 
 	/* bank X */
 	GROUP(sd_d0_a,		8,	5),
@@ -675,26 +662,45 @@ static struct meson_pmx_group meson8_groups[] = {
 	GROUP(sdxc_d0_b,	2,	7),
 	GROUP(sdxc_clk_b,	2,	5),
 	GROUP(sdxc_cmd_b,	2,	4),
+};
+
+static struct meson_pmx_group meson8_aobus_groups[] = {
+	GPIO_GROUP(GPIOAO_0, AO_OFF),
+	GPIO_GROUP(GPIOAO_1, AO_OFF),
+	GPIO_GROUP(GPIOAO_2, AO_OFF),
+	GPIO_GROUP(GPIOAO_3, AO_OFF),
+	GPIO_GROUP(GPIOAO_4, AO_OFF),
+	GPIO_GROUP(GPIOAO_5, AO_OFF),
+	GPIO_GROUP(GPIOAO_6, AO_OFF),
+	GPIO_GROUP(GPIOAO_7, AO_OFF),
+	GPIO_GROUP(GPIOAO_8, AO_OFF),
+	GPIO_GROUP(GPIOAO_9, AO_OFF),
+	GPIO_GROUP(GPIOAO_10, AO_OFF),
+	GPIO_GROUP(GPIOAO_11, AO_OFF),
+	GPIO_GROUP(GPIOAO_12, AO_OFF),
+	GPIO_GROUP(GPIOAO_13, AO_OFF),
+	GPIO_GROUP(GPIO_BSD_EN, AO_OFF),
+	GPIO_GROUP(GPIO_TEST_N, AO_OFF),
 
 	/* bank AO */
-	GROUP_AO(uart_tx_ao_a,		0,	12),
-	GROUP_AO(uart_rx_ao_a,		0,	11),
-	GROUP_AO(uart_cts_ao_a,		0,	10),
-	GROUP_AO(uart_rts_ao_a,		0,	9),
+	GROUP(uart_tx_ao_a,		0,	12),
+	GROUP(uart_rx_ao_a,		0,	11),
+	GROUP(uart_cts_ao_a,		0,	10),
+	GROUP(uart_rts_ao_a,		0,	9),
 
-	GROUP_AO(remote_input,		0,	0),
+	GROUP(remote_input,		0,	0),
 
-	GROUP_AO(i2c_slave_sck_ao,	0,	2),
-	GROUP_AO(i2c_slave_sda_ao,	0,	1),
+	GROUP(i2c_slave_sck_ao,		0,	2),
+	GROUP(i2c_slave_sda_ao,		0,	1),
 
-	GROUP_AO(uart_tx_ao_b0,		0,	26),
-	GROUP_AO(uart_rx_ao_b0,		0,	25),
+	GROUP(uart_tx_ao_b0,		0,	26),
+	GROUP(uart_rx_ao_b0,		0,	25),
 
-	GROUP_AO(uart_tx_ao_b1,		0,	24),
-	GROUP_AO(uart_rx_ao_b1,		0,	23),
+	GROUP(uart_tx_ao_b1,		0,	24),
+	GROUP(uart_rx_ao_b1,		0,	23),
 
-	GROUP_AO(i2c_mst_sck_ao,	0,	6),
-	GROUP_AO(i2c_mst_sda_ao,	0,	5),
+	GROUP(i2c_mst_sck_ao,		0,	6),
+	GROUP(i2c_mst_sda_ao,		0,	5),
 };
 
 static const char * const gpio_groups[] = {
@@ -872,7 +878,7 @@ static const char * const i2c_mst_ao_groups[] = {
 	"i2c_mst_sck_ao", "i2c_mst_sda_ao"
 };
 
-static struct meson_pmx_func meson8_functions[] = {
+static struct meson_pmx_func meson8_cbus_functions[] = {
 	FUNCTION(gpio),
 	FUNCTION(sd_a),
 	FUNCTION(sdxc_a),
@@ -899,6 +905,9 @@ static struct meson_pmx_func meson8_functions[] = {
 	FUNCTION(nor),
 	FUNCTION(sd_b),
 	FUNCTION(sdxc_b),
+};
+
+static struct meson_pmx_func meson8_aobus_functions[] = {
 	FUNCTION(uart_ao),
 	FUNCTION(remote),
 	FUNCTION(i2c_slave_ao),
@@ -906,7 +915,7 @@ static struct meson_pmx_func meson8_functions[] = {
 	FUNCTION(i2c_mst_ao),
 };
 
-static struct meson_bank meson8_banks[] = {
+static struct meson_bank meson8_cbus_banks[] = {
 	/*   name    first             last                 pullen  pull    dir     out     in  */
 	BANK("X",    PIN(GPIOX_0, 0),  PIN(GPIOX_21, 0),    4,  0,  4,  0,  0,  0,  1,  0,  2,  0),
 	BANK("Y",    PIN(GPIOY_0, 0),  PIN(GPIOY_16, 0),    3,  0,  3,  0,  3,  0,  4,  0,  5,  0),
@@ -917,35 +926,43 @@ static struct meson_bank meson8_banks[] = {
 	BANK("BOOT", PIN(BOOT_0, 0),   PIN(BOOT_18, 0),     2,  0,  2,  0,  9,  0, 10,  0, 11,  0),
 };
 
-static struct meson_bank meson8_ao_banks[] = {
+static struct meson_bank meson8_aobus_banks[] = {
 	/*   name    first                  last                      pullen  pull    dir     out     in  */
 	BANK("AO",   PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0,  0,  0, 16,  0,  0,  0, 16,  1,  0),
 };
 
-static struct meson_domain_data meson8_domain_data[] = {
-	{
-		.name		= "banks",
-		.banks		= meson8_banks,
-		.num_banks	= ARRAY_SIZE(meson8_banks),
-		.pin_base	= 0,
-		.num_pins	= 120,
-	},
-	{
-		.name		= "ao-bank",
-		.banks		= meson8_ao_banks,
-		.num_banks	= ARRAY_SIZE(meson8_ao_banks),
-		.pin_base	= 120,
-		.num_pins	= 16,
-	},
-};
-
-struct meson_pinctrl_data meson8_pinctrl_data = {
-	.pins		= meson8_pins,
-	.groups		= meson8_groups,
-	.funcs		= meson8_functions,
-	.domain_data	= meson8_domain_data,
-	.num_pins	= ARRAY_SIZE(meson8_pins),
-	.num_groups	= ARRAY_SIZE(meson8_groups),
-	.num_funcs	= ARRAY_SIZE(meson8_functions),
-	.num_domains	= ARRAY_SIZE(meson8_domain_data),
+static struct meson_domain_data meson8_cbus_domain_data = {
+	.name		= "cbus-banks",
+	.banks		= meson8_cbus_banks,
+	.num_banks	= ARRAY_SIZE(meson8_cbus_banks),
+	.pin_base	= 0,
+	.num_pins	= 120,
+};
+
+static struct meson_domain_data meson8_aobus_domain_data = {
+	.name		= "ao-bank",
+	.banks		= meson8_aobus_banks,
+	.num_banks	= ARRAY_SIZE(meson8_aobus_banks),
+	.pin_base	= 120,
+	.num_pins	= 16,
+};
+
+struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
+	.pins		= meson8_cbus_pins,
+	.groups		= meson8_cbus_groups,
+	.funcs		= meson8_cbus_functions,
+	.domain_data	= &meson8_cbus_domain_data,
+	.num_pins	= ARRAY_SIZE(meson8_cbus_pins),
+	.num_groups	= ARRAY_SIZE(meson8_cbus_groups),
+	.num_funcs	= ARRAY_SIZE(meson8_cbus_functions),
+};
+
+struct meson_pinctrl_data meson8_aobus_pinctrl_data = {
+	.pins		= meson8_aobus_pins,
+	.groups		= meson8_aobus_groups,
+	.funcs		= meson8_aobus_functions,
+	.domain_data	= &meson8_aobus_domain_data,
+	.num_pins	= ARRAY_SIZE(meson8_aobus_pins),
+	.num_groups	= ARRAY_SIZE(meson8_aobus_groups),
+	.num_funcs	= ARRAY_SIZE(meson8_aobus_functions),
 };