scsi: lpfc: Adding ability to reset chip via pci bus reset

This patch adds a "pci_bus_reset" option to the board_mode sysfs attribute.
This option uses the pci_reset_bus() api to reset the PCIe link the adapter
is on, which will reset the chip/adapter.  Prior to issuing this option,
all functions on the same chip must be placed in the offline state by the
admin. After the reset, all of the instances may be brought online again.

The primary purpose of this functionality is to support cases where
firmware update required a chip reset but the admin did not want to reboot
the machine in order to instantiate the firmware update.

Sanity checks take place prior to the reset to ensure the adapter is the
sole entity on the PCIe bus and that all functions are in the offline
state.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 37 insertions, 5 deletions

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f3cb6b4c52ff..766722e993c2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -19264,11 +19264,11 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 	struct lpfc_mbx_wr_object *wr_object;
 	LPFC_MBOXQ_t *mbox;
 	int rc = 0, i = 0;
-	uint32_t shdr_status, shdr_add_status;
+	uint32_t shdr_status, shdr_add_status, shdr_change_status;
 	uint32_t mbox_tmo;
-	union lpfc_sli4_cfg_shdr *shdr;
 	struct lpfc_dmabuf *dmabuf;
 	uint32_t written = 0;
+	bool check_change_status = false;
 
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
@@ -19296,6 +19296,8 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 				(size - written);
 			written += (size - written);
 			bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1);
+			bf_set(lpfc_wr_object_eas, &wr_object->u.request, 1);
+			check_change_status = true;
 		} else {
 			wr_object->u.request.bde[i].tus.f.bdeSize =
 				SLI4_PAGE_SIZE;
@@ -19312,9 +19314,39 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
 	}
 	/* The IOCTL status is embedded in the mailbox subheader. */
-	shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr;
-	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
-	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &wr_object->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &wr_object->header.cfg_shdr.response);
+	if (check_change_status) {
+		shdr_change_status = bf_get(lpfc_wr_object_change_status,
+					    &wr_object->u.response);
+		switch (shdr_change_status) {
+		case (LPFC_CHANGE_STATUS_PHYS_DEV_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3198 Firmware write complete: System "
+					"reboot required to instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_FW_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3199 Firmware write complete: Firmware"
+					" reset required to instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_PORT_MIGRATION):
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3200 Firmware write complete: Port "
+					"Migration or PCI Reset required to "
+					"instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_PCI_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3201 Firmware write complete: PCI "
+					"Reset required to instantiate\n");
+			break;
+		default:
+			break;
+		}
+	}
 	if (rc != MBX_TIMEOUT)
 		mempool_free(mbox, phba->mbox_mem_pool);
 	if (shdr_status || shdr_add_status || rc) {