diff options
| author |   peter chang <dpf@google.com> | 2019-11-14 15:39:07 +0530 |
|---|---|---|
| committer |   Martin K. Petersen <martin.petersen@oracle.com> | 2019-11-19 21:37:33 -0500 |
| commit | 3e253d9657b06b20ab289caba81941c6249afd0b (patch) | |
| tree | 463874695aacd2c9129dec2e58ba4e39d4c0ada9 /drivers/scsi/pm8001/pm80xx_hwi.c | |
| parent | scsi: pm80xx: Cleanup command when a reset times out (diff) | |
| download | linux-dev-3e253d9657b06b20ab289caba81941c6249afd0b.tar.xz linux-dev-3e253d9657b06b20ab289caba81941c6249afd0b.zip | |
scsi: pm80xx: Do not request 12G sas speeds
Occasionally, 6G capable drives fail to train at 6G on links that look good
from a signal-integrity perspective. PMC suggests configuring the port to
not even expect 12G.
Link: https://lore.kernel.org/r/20191114100910.6153-11-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to '')
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 21 |
1 files changed, 4 insertions, 17 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 09008db2efdc..5ca9732f4704 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -37,6 +37,7 @@ * POSSIBILITY OF SUCH DAMAGES. * */ + #include <linux/version.h> #include <linux/slab.h> #include "pm8001_sas.h" #include "pm80xx_hwi.h" @@ -4565,23 +4566,9 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) PM8001_INIT_DBG(pm8001_ha, pm8001_printk("PHY START REQ for phy_id %d\n", phy_id)); - /* - ** [0:7] PHY Identifier - ** [8:11] link rate 1.5G, 3G, 6G - ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b Auto mode - ** [14] 0b disable spin up hold; 1b enable spin up hold - ** [15] ob no change in current PHY analig setup 1b enable using SPAST - */ - if (!IS_SPCV_12G(pm8001_ha->pdev)) - payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | - LINKMODE_AUTO | LINKRATE_15 | - LINKRATE_30 | LINKRATE_60 | phy_id); - else - payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | - LINKMODE_AUTO | LINKRATE_15 | - LINKRATE_30 | LINKRATE_60 | LINKRATE_120 | - phy_id); + payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | + LINKMODE_AUTO | pm8001_ha->link_rate | phy_id); /* SSC Disable and SAS Analog ST configuration */ /** payload.ase_sh_lm_slr_phyid = @@ -4594,7 +4581,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id; ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, sizeof(payload), 0); |